Fego Precision Co A1151 Weather Station Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	958903
Application ID	5Ajf1RAXR6uwnqbFpbex/A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.98kB (199740 bits)
Date Submitted	2008-06-23 00:00:00
Date Available	2008-06-23 00:00:00
Creation Date	2008-06-04 12:17:59
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-06-04 13:20:01
Document Title	Microsoft Word - AA1151遮陽棚感測器_使用手冊--R1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	NWE

Electrical connection
radio wind/sun sensor
remote control
System Assembly
Product Appearance
1、Electrical Specifications
—
Transmission Frequency: 868.35MHZ(SAW)
—
Transmitting Distance: >20M (field)
—
Receiving Distance: >30M (field)
—
Operating Voltage: 200V~250V/50,60 HZ
—
Operating Temperature: 0-50℃
2、Exterior Color
—
Silver
—
Grey
—
Black
3、Function Description
—
AAT173 Transmitter，controls receiver
—
AA1152 Receiver, controls motor rotating direction
—
Receiver can learn up to 15 transmitters
4、Button Function
—
Leran Button: press and hold for 7 seconds to activate learn mode, receiver will
beep 3 times and continues with 1 beep/second up to 20 seconds.
Module will beep
three times per second if receive signal from transmitter indicate successfully
learned.
—
Pressing learn button again during learn mode will beep three times per second and erase
transmission memory.
—
When motor module is in learn mode, press learn button on the wind/light module, wind/light
module will emit a short beep and send a signal to the motor module to complete learning
process.
5、Slide switch function
—
DEMO: DEMO Mode
—
ON:
—
OFF:
Normal Mode
Wind speed sensor OFF
6、Wind Speed Function
—
Demo MODE:
¾
If wind speed is faster than the set speed for 2 seconds consecutively, the wind speed
detector will send signal for yarn retract.
¾
If wind speed is slower than the set speed for 2 seconds consecutively, the wind speed
detector will wend signal for yarn extraction.
¾
—
DEMO mode, minor signal will be determined as wind speed over set speed.
On Mode:
¾
When wind speed is greater than set value for 2 seconds consecutively, send command to
activate yarn retraction.
¾
When wind speed continues to be greater than set value for 3 minutes continuously, send
command to activate yarn retraction.
¾
When fan speed is greater than set speed for 2 seconds consecutively, send signal for yarn
retraction, after retraction, if wind speed is lower than set value then speed up to be greater
than set speed, send over set speed command to retract yarn..
¾
When wind speed is lower than set value for 8 minutes consecutively, send “wind lower
than set speed command
¾
After “wind lower than set speed command” is sent, yarn will not extract unless lux
greater than set value has continued for 8 minutes.
—
If true, send command to extract yarn.
OFF Mode:
¾
Turn off wind speed function.
7、Lux Mode
—
Demo MODE:
¾
When lux is greater than set value for 2 seconds consecutively, send command to extract
yarn.
¾
When lux is lower than set value for 2 seconds consecutively, send command to retract
yarn.
¾
—
DEMO mode, any minor signal is determined to be over set value.
On Mode:
¾
When lux is greater than set value for 8 minutes consecutively, send command to activate
yarn extraction.
¾
When lux is lower than set value for 8 minutes consecutively, send command to retract
yarn.
—
OFF Mode:
¾
Same as On jmode。
8、Status and activation time
Status
Normal
DEMO
OFF
Lux over set value
8MIN
2 SEC
8MIN
Lux below set value
8MIN
2 SEC
8MIN
Wind speed over set value
2SEC
2 SEC
Wind speed below set value
8MIN
2 SEC
FCC Compliance Statement:
This device complies with Port 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:06:04 12:17:59+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:06:04 13:20:01+08:00
Metadata Date                   : 2008:06:04 13:20:01+08:00
Format                          : application/pdf
Creator                         : NWE
Title                           : Microsoft Word - AA1151遮陽棚感測器_使用手冊--R1.doc
Document ID                     : uuid:a72eb068-4f79-4b9d-b6bb-08c746ce6ab5
Instance ID                     : uuid:a2c15c90-e30f-4f51-98c7-e9c89bf4829c
Page Count                      : 5
Author                          : NWE

EXIF Metadata provided by EXIF.tools