Fego Precision Co RF7091BLN01 Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2625099
Application ID	JzrN8LISunyoPDIZw1ZCXQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.53kB (169115 bits)
Date Submitted	2015-05-26 00:00:00
Date Available	2015-10-25 00:00:00
Creation Date	2015-04-13 11:36:30
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2015-05-19 18:17:59
Document Title	untitled

Fego Precision Industrial Co Ltd
>>
RF7091BLN01
Remote Control Set-up
! Note: Code matching is required even if the remote control may control the fan out of the box !
Code match the transmitter with the receiver
Note: receiver itself has NO DIP switch.
Set your Dip Switch to control individual
fan(s) (one per fan handset) and only
power to one fan receiver per time.
Chose same code setting for up to 10 fans
controlled by one handset within a 7m
radius with power to all fans.
Dip Switch
Speed
Remote Control Code Setting
Up 1-2-3-4-5-6
Down 6-5-4-3-2-1
To start the fan press speed button
To change speed of fan press or (indicated by a short buzzer sound)
LCD indicates maximal speed (max)
On/Off
Press the button to start or switch off the fan
Forward
Reverse
For cooling effect and in combination with Air Condition System (clockwise rotation)
To support heating system to exchange temperature (counter clockwise rotation)
Light
Press the button to turn on or switch off the LED light (Light is optional)
Code match the Transmitter (Hand held) with the Receiver
1. Set the code to be encoded by the Dip Switch of transmitter
2. Switch on the main power to activate the receiver, indicated by (one beep)
3. Within 3 minutes after the power is turned on (one beep)͕ƉƌĞƐƐƚŚĞƚƌĂŶƐŵŝƚƚĞƌ͛Ɛ͞KEͬK&&͟
key and do not release (min. 5 seconds) until receiver issues (four beep) short sounds which
indicates successful code match
4. After successful code match, the fan automatically returns to the original speed as indicated
on LCD screen
5. Press any transmitter button to check for proper functioning
6. For code changes, repeat steps 1 to 5
Æ The transmitter and receiver will memorise the code for future use (also if switched off).
10
Federal Communication Commission Interference Statement
15.21
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:097ef532-4300-4cf1-82cd-6cb1f47a971d
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2015:05:19 18:17:59+08:00
Create Date                     : 2015:04:13 11:36:30+08:00
Metadata Date                   : 2015:05:19 18:17:59+08:00
Document ID                     : uuid:f43c8d2f-86f7-458e-b774-bafca4d3ba95
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools