Feig Electronic CPR30 RFID Reader User Manual Annex No
Feig Electronic GmbH RFID Reader Annex No
User Manual
Annex no. 5 Functional Description / User Manual State: 2010-03-01 m. dudde hochfrequenz-technik Vers. no.: 1.10 Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 MONTAGE INSTALLATION ID CPR30-USB Anschluss und Inbetriebnahme Installation and Starting Up Vielen Dank, dass Sie sich für den Kauf des ID CPR30-USB entschieden haben. Thank you for deciding to purchase the ID CPR30USB Der ID CPR30-USB ist als Desktop-Gerät zum berührungslosen Datenaustausch mit gängigen Transpondern nach ISO14443-A, ISO14443-B und ISO15693 konzipiert und eignet sich für eine Vielzahl von Anwendungen wie beispielsweise ePassport, ePurse, eTicketing oder Public Transport. The ID CPR30-USB is designed as a desktop device for contactless data exchange with common Transponder according ISO14443-A, ISO14443-B and ISO15693 and is suited for various applications like ePassport, ePurse, eTicketing or public transport. Die Spannungsversorgung und der Datenaustausch mit einem Computer oder anderem Gerät erfolgen über die USB Schnittstelle. The power supply and data exchange with a host computer or other equipment is carried out via the USB interface c LED grün / green d LED orange Installieren Sie unbedingt zunächst den OBID® USB Treiber oder den OBID® PC/SC Treiber! It is essential to install the OBID® USB Driver or the OBID® PC/SC Driver first! Details entnehmen Sie bitte dem Abschnitt "Inbe- For more details please read section 'Starting triebnahme" Up" CPR30-Manual.doc / 2011-04-06 OBID® classic-pro INSTALLATION Sicherheits- und Warnhinweise ID CPR30-USB Safety Instructions • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • The device may only be used for the intended purpose designed by for the manufacturer. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen. • The operation manual should be conveniently kept available at all times for each user. • • Unzulässige Veränderungen und die Verwendung von Ersatzteilen und Zusatzeinrichtungen, die nicht vom Hersteller des Gerätes verkauft oder empfohlen werden, können Brände, elektrische Schläge und Verletzungen verursachen. Solche Maßnahmen führen daher zu einem Ausschluss der Haftung und der Hersteller übernimmt keine Gewährleistung. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. • The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. • Repairs may only be executed by the manufacturer. • Installation, operation, and maintenance procedures should only be carried out by qualified personnel. • Für das Gerät gelten die Gewährleistungsbestimmungen des Herstellers in der zum Zeitpunkt des Kaufs gültigen Fassung. Für eine ungeeignete, falsche manuelle oder automatische Einstellung von Parametern für ein Gerät bzw. ungeeignete Verwendung eines Gerätes wird keine Haftung übernommen. • Reparaturen dürfen nur vom Hersteller durchgeführt werden. • Anschluss-, Inbetriebnahme-, Wartungs-, und • sonstige Arbeiten am Gerät dürfen nur von Fachkräften mit einschlägiger Ausbildung erfolgen. • Alle Arbeiten am Gerät und dessen Aufstellung müssen in Übereinstimmung mit • den nationalen elektrischen Bestimmungen und den örtlichen Vorschriften durchgeführt werden. • • Bei Arbeiten an dem Gerät müssen die jeweils gültigen Sicherheitsvorschriften beachtet werden. • Besonderer Hinweis für Träger von Herzschrittmachern: Obwohl dieses Gerät die zulässigen Grenzwerte für elektromagnetische Felder nicht überschreitet, sollten Sie einen Mindestabstand von 25 cm zwischen dem Gerät und Ihrem Herzschrittmacher einhalten und sich nicht für längere Zeit in unmittelbarer Nähe des Geräts bzw. der Antenne aufhalten. FEIG ELECTRONIC GmbH Use of the device and its installation must be in accordance with national legal requirements and local electrical codes . When working on devices the valid safety regulations must be observed. Special advice for carriers of cardiac pacemakers: Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in an immediate proximity of the device respective the antenna for some time. Page 3 CPR30-Manual.doc OBID® classic-pro INSTALLATION Lieferumfang ID CPR30-USB Scope of Delivery • ID CPR30-USB Reader • ID CPR30-USB Reader • USB Kabel (A - Mini B Stecker) • USB cable (A - mini B connector) • Montageanleitung • Installation Manual Inbetriebnahme Starting Up • Entfernen Sie die Schutzfolie von der Frontscheibe. • Remove the liner from the front panel. • Stellen Sie das Gerät nicht in die unmittelbare Umgebung von Computermonitoren, elektronischen Geräten oder Metallplatten. • Make sure that the device is not placed in the near proximity of computer monitors, electronic devices or metal plates. • Stellen Sie das Gerät nicht unmittelbar in die Sonne. • Do not place the device directly into the sun. • Installieren Sie unbedingt zunächst den gewünschten USB Treiber. Folgende Treiber Varianten stehen Ihnen zur Verfügung: • It is essential to install first the desired USB driver. Two different driver versions are available: • • OBID Standard USB-Treiber • PC/SC-Treiber (inclusive USB-Treiber) ® • USB-Treiber, Dokumente, Firmware und Demoprogramme können Sie sich unter www.feig.de mit nachfolgenden Zugangsdaten von dem FEIG Downloadbereich herunterladen. • Die Verbindung zu einem PC und die Spannungsversorgung erfolgt über die USB Buchse e, mit einem USB Kabel mini B Stecker. • USB Kabel mit max. 2,5 m Länge verwenden! OBID® Standard USB-Driver • PC/SC-Driver (including USB-Driver) USB drivers, documents, firmware and demo programs, can be downloaded from the FEIG download area on www.feig.de using the following login data. Username: CPR30USB Password: reader Benutzername: CPR30USB Passwort: reader Bitte beachten Sie die entsprechende Installations-Anleitung! • Please read the according installation instruction first! • The connection with a PC and the power supply takes place through the USB connector e via a USB cable with mini B connector. • Use only USB cable with max. 2,5 m length! e - USB mini B connector FEIG ELECTRONIC GmbH Page 4 CPR30-Manual.doc OBID® classic-pro INSTALLATION ID CPR30-USB Betrieb Operating Die grüne und orange LED signalisieren Betriebszustände des ID CPR30-USB The green and orange LED indicates operating status from the ID CPR30-USB Nach dem Einschalten oder nach einem Reset blinken beide LED für ca. 2 Sek. gleichzeitig. After power-on or a reset both LED flashing simultaneous for approx. 2 sec. Im Betrieb signalisieren die LED folgende Betriebs- During operation the LED's indicates the following operating status: zustände: o LED - green o LED - grün flashing: blinkt: Reader is ready for operation but communicates currently not with the PC. Reader ist betriebsbereit hat aber derzeit keine Kommunikation mit dem PC. permanent: Reader is ready for operation and communicates with the PC. permanent: Reader ist betriebsbereit und kommuniziert mit dem PC. p LED - orange p LED - orange Communication with a Transponder. Kommunikation mit einem Transponder. FEIG ELECTRONIC GmbH Page 5 CPR30-Manual.doc OBID® classic-pro INSTALLATION ID CPR30-USB Technische Daten / Technical Data Gehäuse / Housing Plastic (Housing ASA-PC / Front: acrylic glass) Abmessungen / Dimensions 144 x 84 x 18 mm (5.69 x 3.30 x 0.71 in) Farbe / Color white body with black front Gewicht / Weight 105 g Schutzart / Protection Class IP 42 Temperaturbereich / Temperature Range Betrieb / Operation -20 °C to +60 °C Lagerung / Storage -40 °C to +85 °C Relative Luftfeuchte / Relative Air Humidity 95 % (non-condensing) MTBF 500.000 h Spannungsversorgung / Supply Voltage 5V ϑ USB bus powered Stromaufnahme / Current Consumption max. 230 mA Host Interface USB Full-Speed (12 Mbit/s) Optische Anzeigen / Optical Indicators • LED green: power and online / offline • LED orange: Transponder communication Akustische Anzeigen / Acoustic Signaler • Beeper EEPROM (for Parameter) 512 Byte (1 * 106 write cycles) FLASH (for Firmware) Firmware update in Application possible Antenne / Antenna Internal Betriebsfrequenz / Operating Frequency 13.56 MHz RF-Sendeleistung / RF- transmitting power 100 mW Datenrate / Datarate: ISO 14443-A: 106 kBit/s ISO 14443-B: 106...848 kBit/s RF Interface • ISO15693 • ISO14443-A & ISO14443-B - 106 kbit/s - part 4 fully supported • mifare classic, SLE44R35S (UID only) • e.g.: I•Code SLI, Tag-It HFI, my-d vicintiy, STM LRI512, mifare® UltraLight, mifare® DESfire, mifare Plus (SL0, SL3) Smart MX, SLE44R35S, SLE66CL, ST19XR34, etc. • NFC: Type 2 and Type 4 in read/write and NFC card emulation mode Unterstützte Transponder Supported Transponder Betriebsarten / Operating modes FEIG ELECTRONIC GmbH Polling-Mode Page 6 CPR30-Manual.doc OBID® classic-pro INSTALLATION Driver Support ID CPR30-USB Windows 32Bit and Windows 64Bit Systems (Windows Server 2003®, Windows Server 2008®, Windows XP®SP2, Windows Vista®, Windows 7®) Radio Approval • PC/SC Driver • OBID® USB Driver Europe EN 300 330 USA FCC 47 CFR Part 15 Elektromagnetische Verträglichkeit / EMC Sicherheit / Safety EN 301 489 Niederspannung / Low Voltage EN 60950 Human Exposure EN 50364 Umwelt und Stoffverbote / Waste and Hazardous Substances WEEE - 2002/96/EC RoHS - 2002/95/EC Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/EG vom März 99. When properly used this radio equipment conforms to the essential requirements of Article 3 and the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99. Equipment Classification gemäß ETSI EN 300 330 und ETSI EN 301 489: Class 2 Equipment Classification according to ETSI EN 300 330 and ETSI EN 301 489: Class 2 FCC ID PJMCPR30 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FEIG ELECTRONIC GmbH Page 7 CPR30-Manual.doc OBID® classic-pro INSTALLATION ID CPR30-USB IC: 6633A-CPR30 This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) this device may not cause interference, and (1) l'appareil ne doit pas produire de brouillage, et (2) this device must accept any interference, including interference that may cause undesired operation of the device. (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. © Copyright 2011 by FEIG ELECTRONIC GmbH • Lange Straße 4 • D-35781 Weilburg-Waldhausen Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. Supply subject to availability. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthaltenden Informationen frei von fremden Schutzrechten sind. FEIG ELECTRONIC GmbH erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this manual and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID® and OBID i-scan® are registered trademarks of FEIG ELECTRONIC GmbH. All cited brand names, product names, or trademarks belong to their respective holders. FEIG ELECTRONIC GmbH Page 8 CPR30-Manual.doc
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2011:05:04 10:02+02:00 Create Date : 2011:05:04 10:02+02:00 Metadata Date : 2011:05:04 10:02+02:00 Creator Tool : Adobe Acrobat 8.1 Combine Files Format : application/pdf Title : Annex No Creator : m.dudde Document ID : uuid:6519a94d-3cfd-4d80-9c53-12ee4e98103f Instance ID : uuid:8d56ea7e-513e-4079-b424-059e496eb8b5 Producer : Adobe Acrobat 8.1 Page Count : 8 Author : m.duddeEXIF Metadata provided by EXIF.tools