Feig Electronic MR100-PR100 Passive Tag Reader User Manual ID ISCMR100 Installation Guide

Feig Electronic GmbH Passive Tag Reader ID ISCMR100 Installation Guide

Contents

Installation Guide

Professional Installation GuideID ISC.MR100 1/1File :ID ISCMR100-Installation Guide.DOCDate :10.09.2001Professional Installation GuideID ISC.MR100 for FCC RequirementsInstallation with FCC Approval:Electrical connection, commissioning, maintenance, measurement and calibrationwork on the unit is to be performed only by electrical specialists or persons withequivalent training.In countries where FCC approval is required, the ID ISC.MR100 Reader may only beoperated using the antennas listed in Table 1.Changes or modifications not expressly authorized by the relevant approval body may resultin revocation of the user’s operating permission.An SMA socket is provided on the circuit board for connecting the external antenna.The maximum tightening torque for the SMA sockets is 0.45 Nm.(Caution: Higher tightening torque will damage the connector.)Article No. Part No.1663.000.00.00 ID ISC.ANT340/240Table 1: Antennas with FCC Approval

Navigation menu