Fender Musical Instruments FMAPR4475 Fender PCB Assembly including the BT Radio Module - PN 7710068000 FMA BT-FTSW-USB / BT Module - FreeWings FW3817-30 User Manual
Fender Musical Instruments Fender PCB Assembly including the BT Radio Module - PN 7710068000 FMA BT-FTSW-USB / BT Module - FreeWings FW3817-30
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3297992 |
| Application ID | lpBv0ysexQzQVVLybrU9vg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 79.53kB (994064 bits) |
| Date Submitted | 2017-02-27 00:00:00 |
| Date Available | 2017-02-28 00:00:00 |
| Creation Date | 2016-11-29 14:51:24 |
| Producing Software | Bluebeam Brewery 5.0 |
| Document Lastmod | 2016-11-29 15:03:40 |
| Document Title | User Manual |
| Document Creator | Bluebeam Stapler 8.5.1 |
Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Module Description The Fender FMA BT-FTSW-USB PCB Assembly is an auxiliary PCB used in the family of Fender Modular Architecture (FMA) products. The board has a USB port with a micro AB connector, a Fender Footswitch port with a ¼” phone jack and a wireless module. Circuit Description/Theory of Operation There are three main sections of the circuit: • • • Bluetooth module (FreeWings FW3817-30), antenna, & audio output circuit USB port Footswitch port The USB circuit consists of ESD protection components and a micro AB USB connector. The Footswitch circuit consists of ESD protection components and a ¼” phone jack connector. Both of these circuits are unrelated to the Bluetooth section, and are shared on the PCB for mechanical convenience. The FreeWings module is a complete Bluetooth implementation with analog audio output. An F-style antenna is connected to the RF output of the module through a test switch and matching network. The module is powered with a 3.3V DC supply and digital ground. The PCB is dual layer with digital ground plane sections stitched together on both sides where possible. The analog stereo audio output from the module is buffered by an op-amp stage before sending back to the host system. The analog audio buffer circuit has a separate power supply and ground system to isolate it from digital noise. All Bluetooth functionality is controlled by on-board firmware. But the module may be accessed for test through the SPI port to a computer interface module (available from FreeWings). A description of specific commands for Bluetooth is beyond the scope of this document and can be found in documentation from FreeWings or CSR for the CSR8630 chipset. Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 1 November 8, 2016 FMA Main PCB Interface Header All control and power signals come from a connection to a motherboard through an 18-pin, 2mm dual row female header. The pinout for the header is in the table below: Pin 10 11 12 13 14 15 16 17 18 Signal USB_OTG_DP USB_OTG_DN GNDD FTSW_DAT STATUS_LED-CHIP_WAKE FTSW_DET PAIR-HOST_WAKE USB_OTG_5V USB_OTG_ID 3.3V GNDD +5V_ANALOG GNDA G2V5 BTA_L BTA_R Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Description USB OTG port data signal USB OTG port data signal Digital GND Footswitch port data signal Status GPIO output Footswitch port detect Pair GPIO input Reserved for future use USB OTG port ID signal 3.3V DC Supply for digital circuitry and BT module Not used Digital GND Not used 5V DC Supply for analog audio circuit Audio GND 2.5V half-bias reference for analog audio circuit Analog audio signal output LEFT Analog audio signal output RIGHT Page 2 November 8, 2016 Power Consumption Operating Voltage Operating Current 3.3VDC +/- 9% 50mA Board Dimensions Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 3 November 8, 2016 PHOTOS Top Side PCB Module Bottom Side PCB Module SILKSCREEN ID LABEL Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 4 November 8, 2016 COMPLIANCE STATEMENTS FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end product must be labelled in a visible area with the following: "Contains FCC ID: XQW-FMAPR4475" If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to missing shielding the module is strictly limited to integration by the Grantee himself Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 5 November 8, 2016 or his dedicated OEM integrator under control of the Grantee. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: This device is intended only for OEM integrators under the following conditions: (1) According to FCC Part 15 Subpart C Section 15.212, the radio elements of the modular transmitter must have their own shielding. However, due to there is no shielding for this WIFI/BT module, this module is granted as a Limited Modular Approval. (2) This module has been designed to operate with PCBA antenna having a maximum gain of 0dBi. (3) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. The module will be responsible to satisfy SAR/RF Exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. The module has no shielding and tested stand alone. This module is tested and approved as Limited modular approval with stand alone configuration, any OEM incorporated this radio module into any system are require additional testing and evaluation. The module is only certified with the installed antenna. Any change of the antenna will void the certification. IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. Avis d’Industrie Canada Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes: 1) I'appareil ne doit pas produire de brouillage; et 2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil. Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 6 November 8, 2016 Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. The final end product must be labeled in a visible area with the following "Contains TX IC : 8690A-FMAPR4475 ". This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Fender FMA BT-FTSW-USB PCBA (PN 7710068000) Manual and Spec, revision 1.0 Page 7 November 8, 2016 FW3817-30 Bluetooth Module Features Bluetooth v4.0 specification compliant 80MHz RISC MCU and 80MIPS Kalimba DSP Support AVRCP/A2DP +8dBm TX power and -89dBm RX sensitivity AVRCP v1.4 A2DP v1.2, multipoint A2DP support enables connection to 2 A2DP source devices for music playback 5-band fully configurable EQs Multipoint support for A2DP connection to 2 A2DP sources for music playback Secure simple pairing, CSR's proximity pairing and CSR's proximity connections Stereo line-in Serial interfaces: USB 2.0, UART, I²C and SPI SBC, MP3 and AAC decoder support Wired audio support Integrated dual switch-mode regulators, linear regulators and battery charger. 3 LED outputs (RGB) 14.7mm x 21mm SMT package General Description FW3817-30 is a high performance, cost effective, low power and compact solution. The Bluetooth module provides a complete 2.4GHz Bluetooth system based on the BlueCore CSR8630 chipset which is a single chip radio and baseband IC for Bluetooth 2.4GHz systems,. This module is fully compliant to Bluetooth v4.0 for audio communications. Freewings Technologies Co., Ltd CSR8630 Audio Solution Fully Qualified Single-chip Bluetooth® v4.0 System FW3817-30 V1.5 RF 2.4G Radio UART LEDs PIOs MCU ROM/RAM Clock Generation Audio in/out Debug CSR8630 26MHz E2prom/ SPI Flash Applications Bluetooth stereo speakers Bluetooth stereo earphone A2DP audio sink (including multipoint) for music streaming www.free-wings.cn FW3817-30 Bluetooth Audio Module Datasheet V1.5 FW3817-30 Details Features Bluetooth Profiles Bluetooth v4.0 specification support A2DP v1.2 AVRCP v1.4 DI v1.3 Music Enhancements Configurable 5-band EQ for music playback (rock, pop, classical, jazz, dance etc) SBC,MP3, AAC and fast stream decoder Volume Boost Wired Audio Mode supported USB Audio Mode supported Stereo Widening (S3D) Additional Functionality Support for multi-language programmable audio prompts CSR’s proximity pairing and CSR’s proximity connection Multipoint support HFP connection to 2 handsets for voice Multipoint support A2DP connection to 2 A2DP source devices for music playback Talk-time extension Fast charging support up to 200mA with no external components. Higher charge currents using external pass device. Slim module with 21mm x 14.7mm x 2.0mm FreeWings Technologies Co., Ltd Page 2 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 Contents GENERAL SPECIFICATIONS ................................................................................................................. 4 MODULE PACKAGE INFORMATION .................................................................................................. 5 6.1 PINOUT DIAGRAM AND PACKAGE DIMENSIONS .............................................................................. 5 6.2 MODULE PIN DESCRIPTIONS ........................................................................................................... 6 ELECTRICAL CHARACTERISTICS ..................................................................................................... 7 7.1 RESET ............................................................................................................................................. 7 7.2 POWER ON AND POWER OFF............................................................................................................ 7 7.3 I/O .................................................................................................................................................. 7 7.4 BATTERY CHARGER ....................................................................................................................... 8 7.5 USB................................................................................................................................................ 8 7.6 ABSOLUTE MAXIMUM RATINGS..................................................................................................... 8 7.7 RECOMMENDED OPERATING CONDITIONS ..................................................................................... 8 7.8 POWER CONSUMPTION.................................................................................................................... 8 MAIN COMPONENTS LIST ..................................................................................................................... 9 RECOMMENDED REFLOW TEMPERATURE PROFILE ............................................................... 10 RECORD OF CHANGES ......................................................................................................................... 11 IMPORTANT NOTICE ............................................................................................................................ 11 FreeWings Technologies Co., Ltd Page 3 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 1 General specifications Model Name FW3817-30 Product Description Bluetooth 4.0 Class2 Module Bluetooth Standard Bluetooth 4.0 Chipset CSR8630 Dimension 21mm x 14.7mm x 2.0mm Temperature Storage Temperature Operating Temperature ～+85℃ -20～+70℃ -40 Electrical Specifications Supply Voltage Power Consumption in A2DP slave mode with no load and playing peak noise Modulation 2.80~4.25V Frequency Range 2402 Maximum RF Transmit Power 4dBm Receive Sensitivity -84dBm FreeWings Technologies Co., Ltd 14mA GFSK/π/4 DQPSK/8DPSK ～2480MHz Page 4 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 2 Module Package Information 6.1 Pinout Diagram and package dimensions Unit： Pin detail Mechanical Dimensions Unit： Pin detail Recommended PCB layout footprint FreeWings Technologies Co., Ltd Page 5 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 6.2 Module Pin descriptions Pin No. Pin Name Pin Type Description GND VSS Ground USB_P Bidirectional USB data plus USB_N Bidirectional USB data minus PIO15 Bidirectional with strong pull-up MFB key input PIO14 Bidirectional with strong pull-up Skip+ key input PIO16 Bidirectional with strong pull-up Volume+ key input PIO9 PIO1 Bidirectional with strong pull-up Volume- key input NC N.C NOT CONNECTED 10 PIO17 11 RSTn Input with strong pull-up Reset if low. Pull low for minimum 5ms to cause a reset. 12 SPI_MOSI Bidirectional with weak pull-down SPI_MOSI for debug only 13 SPI_CLK Bidirectional with weak pull-down SPI_CLK for debug only 14 SPI_CSB Bidirectional with weak pull-down SPI_CSB active low for debug only 15 SPI_MISO Bidirectional with weak pull-down SPI_MISO for debug only 16 LED1 Open drain output LED driver 17 LED0 Open drain output LED driver 18 VREG_EN Power on/off key input Power on/off input key indication 19 VBAT Battery positive terminal Power supply input for 2.8~4.2V 20 VCHG Charger voltage input Internal charger input for charging 21 1V8 1.8V output 1.8V output for keys 22 GND VSS Ground 23 VBAT_SEN SE Battery Sense Battery charger sense input 24 PIO6 Bidirectional with strong pull-down Programmable input/output line Bidirectional with strong pull-down Bidirectional with strong pull-down External PA enable output high Skip- key input 25 CHG_EXT Charger external pin External battery charger control. External battery charger transistor base control when using external charger boost. Otherwise leave unconnected. 26 LED2 Open drain output LED driver 27 NC N.C Not Connected 28 LINE_RP Analog input Line input, positive right 29 LINE_RN Analog input Line input, negative right 30 AIO0 Analog input ADC input used only temperature of battery 31 LINE_LP Analog input Line input, positive left 32 LINE_LN Analog input Line input, negative left FreeWings Technologies Co., Ltd to test Page 6 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 33 SPK_RN Analog output Speaker output negative right 34 SPK_RP Analog output Speaker output positive right 35 SPK_LN Analog output Speaker output negative left 36 SPK_LP Analog output Speaker output positive left 37 GND VSS Ground 38 RF PORT Analog 39 GND VSS Bluetooth 50Ohm Ground 40 NC N.C Not Connected 41 NC N.C Not Connected 42 NC N.C Not Connected signal input/output port 3 Electrical Characteristics 7.1 Reset FW3817-30 module is reset from several sources.We suggest to use power-on reset,that means to leave the RSTn pin floating: ● RSTn pin pulled low for minimum 5ms ● Power-on reset, leaving the RSTn pin floating. It should be that it was 0V voltage at any pin before reset. ● USB charger attach reset ● Software configured watchdog timer 7.2 Power on and power off FW3817-30 module is power on from two sources: ● VREG_EN pin pulled high for minimum 100ms when VBAT pin is in the status of stable power. ● VREG_EN pin pulled high from low when VBAT pin is in the status of stable power. The wrong timing sequence of VREN_EN and VBAT will lead to error of power on. FW3817-30 module is power off from two sources: ● VREG_EN pin pulled high for minimum 100ms when VBAT pin is in the status of stable power. ● VREG_EN pin pulled low from high when VBAT pin is in the status of stable power. The wrong timing sequence of VREN_EN and VBAT will lead to error of power off. 7.3 I/O The driver power voltage of all the PIO port is 1.8V inside of the module. FreeWings Technologies Co., Ltd Page 7 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 7.4 Battery Charger FW3817-30 module provides two kinds of battery charger controls. The internal charger circuit can provide up to 200mA of charger circuit. The module controls an external pass transistor which can provide 500mA of charger circuit. 7.5 USB USB_P and USB_N can be used to updating software or USB audio.Both of them request that VCHG pin must be supplied 5V power.The two data signals do not need any resistance or capacitance. 7.6 Absolute Maximum Ratings Rating Minimum Maximum -40 85 ℃ VCHG -0.4 5.75 LEDs -0.4 4.4 VBAT SENSE -0.4 4.4 VREG_EN -0.4 4.4 VBAT -0.4 4.4 Minimum Typical Maximum Unit -20 20 70 ℃ VCHG 4.75 5.00 5.75 LEDs 1.10 3.70 4.30 PIO 1.50 1.80 1.90 3.70 4.25 VREN_EN 2.80 3.70 4.25 VBAT 2.80 3.70 4.25 Current Typical Unit VBAT 0.1 uA VBAT 12 mA VBAT 24 mA VBAT 0.5 mA Storage Temperature Unit Supply Voltage 7.7 Recommended Operating Conditions Rating Operating Temperature Supply Voltage VBAT SENSE 7.8 Power consumption Status Power off A2DP slave mode with no load and playing peak noise A2DP slave mode with two16ohm speakers and playing peak noise Pause in A2DP slave mode connection FreeWings Technologies Co., Ltd Page 8 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 4 Main components list NO. Description Inductor 4.7uH ±20% 0805 Inductor 4.7uH ±20% 0805 Inductor 4.7uH ±20% 0805 IC BT BC8630 QFN68 Filter WiFi 1608 5(ROM 版) （Flash版） Manufacture 麦麦 达达 顺顺Sunlord Manufacturer P/N MGFL2012C4R7MT-LF IP20124R7MPS9 MSL2012S4R7MHT CSR CSR8630B04-IQQF-R ACX BF1608-L2R4DAAT/LF Crystal 26M 8.5PF 10PPM HOSONIC E3SB26.0000F8ES11M Crystal 26M 8.5PF 10PPM TXC 7M26000314 Crystal 26M 8.5PF 10PPM EPSON XIE000021008300 Crystal 26M 9PF 10PPM IC EEPROM FM24C128A-TS-T-G TSSOP-8 IC EEPROM GT24C128A-2ZLI-TR TSSOP-8 IC Flash Serial GD25Q41B 4M-bit SOP-8 Gigadevice IC Flash Serial MD25D40 4M-bit SOP-8 Gigadevice IC 1.8V 4M SPI FLASH SOP -8 150mile IC 1.8V 4M SPI FLASH SOP -8 150mile H.ELE X3S026000B91H-NZ 复复复复复 FM24C128A-TS-T-G 聚聚 GT24C128A-2ZLI-TR FreeWings Technologies Co., Ltd 先捷 先捷 GD25Q41BTIGR MD25D40TIGR MXIC MX25U4033EM1I-12G MXIC KH25U4033EM1I-12G Page 9 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 5 Recommended reflow temperature profile 1) Follow: IPC/JEDEC J-STD-020 C 2) Condition: Average ramp-up rate(217℃ to peak): 1～2℃/sec max. Preheat: 150～200C, 60～180 seconds Temperature maintained above 217℃: 20～40 sec Peak temperature: 250+0/-5℃ or 260+0/-5℃ Ramp-down rate: temperature: 8 minutes max Cycle interval: 5 minus The module Must go through 125℃ baking for at least 9 hours before SMT AND IR reflow process! 若拆封后未立即上线，翼动通讯建议让下次上线前务必以 125℃烘烤 9 小时以上！ FreeWings Technologies Co., Ltd Page 10 of 11 FW3817-30 Bluetooth Audio Module Datasheet V1.5 6 Record of Changes Data 2015-12-14 Revision V1.5 Description Upgrade the spec. format 7 Important Notice Free Wings Technologies Co.,Ltd (FW) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current. All products are sold subject to the FW terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. FW warrants performance of its products to specifications applicable at the time of sale in accordance with FW’s standard warranty. Testing and other quality control techniques are utilized to the extent FW deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. In order to minimize risks associated with customer applications, adequate design and operating safeguards must be used by the customer to minimize inherent or procedural hazards. FW products are not authorized for use as critical components in life support devices or systems without the express written approval of an officer of the company. Life support devices or systems are devices or systems that are intended for surgical implant into the body, or support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided, can be reasonably expected to result in a significant injury to the user. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. FW assumes no liability for applications assistance or customer product design. FW does not warrant or represent that any license, either express or implied, is granted under any patent right, mask work right, or other intellectual property right of FW covering or relating or any combination, machine, or process in which such products or services might be or are used. 深圳地址：深圳市南山区西丽桑泰科技园 2 栋 4 楼 Address Shenzhen: 4F,2#, Sangtai Industry Park, Xili, Nanshan, Shenzhen, Guangdong Province，China, 518055 Tel: (+86 755)86116587 Fax: (+86 755)28094122 Website: www.free-wings.cn E-mail: wenmin.zhang@free-wings.cn FreeWings Technologies Co., Ltd Page 11 of 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 18 Page Layout : OneColumn Producer : Bluebeam Brewery 5.0 Create Date : 2016:11:29 14:51:24-07:00 Modify Date : 2016:11:29 15:03:40-07:00 Creator : Bluebeam Stapler 8.5.1EXIF Metadata provided by EXIF.tools