FengShun Peiying Electro Acoustic AXV5000SR Car Multimedia Player User Manual

FengShun Peiying Electro-Acoustic Co., Ltd Car Multimedia Player

User manual

Quick Start GuideAXV5000SRThis Quick Start Guide gives you the basics tostart using your AXV5000SR. Please visitwww.axxeraaudio.com/support/manuals.phpto download a complete owner’s manual or call customerservice at 1-866-382-5476 (Monday-Friday, 9AM-5PM EST)Wall Mount RadioButton Operation1 2 3 4 5 67910121811131415161723 19202221824APP ControlThe Axxera iPlug™ Smart App is the ultimate wireless remote control for your AXV5000SR receiver. You can download the Axxera iPlug app from AppleAppstore or Google Playstore and install it on your smartphone or tablet. Step 1: Cut a mounting hole referring to the cutout diagram on the right sideStep 2: Put a cushion on the left and right side of the unit as shown on the right side and slide the unit into the mounting hole. Step 3: Connect wiring harness and antenna and mount the unit using screws Snap trim ring into placeMounting the Head Unit: ISO mountingFCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Axxera Electronics Corp.Toll Free: 1-866-382-5476Monday-Friday, 9AM-5PMwww.axxeraaudio.com©2014 Dual Electronics Corp. All rights reserved.The SD logo is a trademark of the SD Card Association.iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license. Pandora, the Pandora logo, and the Pandora trade dress are trademarks of Pandora Media, Inc., used with permission.Other trademarks and trade names are those of their respective owners.N SA 0 318 - V 01 Bluetooth® Operation*Preparation Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process. Pairing a New DeviceThe head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.The device name is “AXV5000SR” The Bluetooth passcode is "1234” Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".Note: The head unit can be in any mode of operation when pairing is performed.Streaming AudioTroubleshooting•Press ll to skip to the next available audio track.•Press nn to skip to the previous audio track.•Press l/ II to toggle between play and pause during playback.The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:General OperationPower On/Off Press the button to turn the unit on. Press again to turn unit off.Volume Adjust volume using volume + and - Button.Mute Press to silence the audio. Press again to resume listening at the previously selected volume.Auxiliary Inputs Insert a 3.5mm cable in the units front AUX port, or RCA cables into the rear AUX-IN connectors. Reset Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel.Setting the Clock With the unit on, press and hold DISP until the clock begins to flash, then release. Press Volume + and - to adjust the clock. Press DISP button one more time, then the minute begins to flash. Press Volue + and - to adjust the minute. Press DISP again to save the selected time Display Press DISP to toggle display between various displayed information.Audio / Menu Press and hold AUDIO/MENU to enter the menu. Press AUDIO/MENU to select between menu (Auto Store, Freq USA/EURO, DX/LOC, Stereo/Mono, Demo On/Off, Programmable Volume, Sleep, Alarm, BT, Reset, and Beep) and press Volume + and 1 to adjust options Changing Modes Press MODE to select between AM/FM, Front Aux, Rear Aux, USB and Bluetooth modes. Modes of operation are indicated in the display. AM/FM Tuner OperationSeek TuningManual TuningBandStoring PresetsRecalling PresetsPress TUNE nn or TUNE ll for more than one second to seek to the next strong station.Press TUNE nn or TUNE ll momentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly.Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory.Up to 18 FM and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display.Preset stations can be recalled any time by pressing the corresponding preset button.Speaker Zone Control Operation Press the Zone “F” button to turn on/off the sound from this zone. Speaker FrontSpeaker Zone 1Speaker Zone 2Press the Zone “1” button to turn on/off the sound from this zone. Press the Zone “2” button to turn on/off the sound from this zone. 1. 2. 3. 4. 5. 6. 7. 8. 9.10.11.12.Mute/DimmerModeDispPreset #1/RepeatPreset #2/RandomPreset #3/Intro scanPreset #6/Folder UpIR Remote SensorPreset #5/Folder DownUSB SlotAux InputPreset #4/Play/Pause13.14.15.16.17.18.19.20.21.22.23.24.Tune/Track UpTune/Track DownVolume UpVolume DownResetZone2 Speaker On/OffBand/EscZone1 Speaker On/OffSearch/SelectFront Speaker On/OffPowerAudio/MenuWiring Diagram - Inputs/Outs VIOLETVIOLET/BLACKBLUEAMP REMOTEACC GRAYGRAY/BLACKWHITEWHITEVBLACKLIGHTGGREENLIGHTGGREENVBLACKZONE1 SPEAKER RZONE1 SPEAKER LZONE2 SPEAKER RZONE2 SPEAKER LANTRemote Control Operation1 2 3456781012111413161518179Limited One-Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. (Note that select marine products carry a 2-year warranty. Please visit www.dualav.com for details.) Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A.What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. What to do?1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.4. For more information and for the location of the nearest authorized service center please contact us toll-free at 1-866-382-5476 or by email at cs@dualav.com.Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.USB Operation Playing MP3Track SelectFast Forward and ReversePause Folder AccessRepeatRandomIntroTo play MP3 files, insert a data USB device containing MP3 files.Press TUNE ll to skip to the beginning of the next song. Press TUNE nn to return to the beginning of the current song. Pressing TUNE nn again skips to the beginning of the previous song.Press and hold TUNE ll or TUNE nn to fast forwardor reverse a track.Press l/ II to temporarily stop playback. Press l/ II again to resume playback. Press to select the next folder. Press to select the previous folder. Folder access is only available on discs or devices with more than one folder.Press RPT to enter the Repeat menu, Press the RPT button sequentially to select one of the options:Press RPT to enter the Repeat menu, Press the RDMbutton sequentially to select one of the options:• ALL - Plays all tracks on disc or device.• TRACK - Continuously repeats selected track.• FOLDER - Continuously repeats all files in folder.• OFF - Cancels RDM function.• ALL - Plays all tracks in random order.• FOLDER - Plays all tracks in folder in random order.Press INT• OFF - Cancels the INT function.• ALL - Plays first 10 seconds of each track.• FOLDER - Plays first 10 seconds of each track in the selected folder. to enter the Intro menu, Press the INTbutton sequentially to select one of the options: 1. 2. 3. 4. 5. 6. 7. 8. 9.10.11.12.13.14.15.16.17.18.Mute/DimmerVolume UpMode/PowerTune/Track UpBand/EscPreset #3/Intro scanPreset #6/Folder UpZone2 Speaker On/OffZone1 Speaker On/OffFront SpeakerPreset #5/Folder DownPreset #4/Play/PausePreset #2/RandomPreset #1/RepeatVolume DownAudio/Menu Search/SelectTune/Track DownRECOMMENDED CUTOUT (9.6 inch) 243.8mm (2.3 inch) 59.2mmR0.2 inch R 5mmEVA PAD(2EA) T/SCREW T3X15(4EA) TRIM RING

Navigation menu