Fibocom Wireless M210AM LTE module User Manual

Fibocom Wireless Inc. LTE module

User Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 1of 38M210-AM DatasheetVersion: 2.0.0Update date: 05/17/2017
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 2of 38CopyrightCopyright © 2017 Fibocom Wireless Inc. All rights reserved.Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt,copy any part of or the entire document, or distribute the document in any form.NoticeThe document is subject to update from time to time owing to the product version upgrade or other reasons.Unless otherwise specified, the document only serves as the user guide. All the statements, information andsuggestions contained in the document do not constitute any explicit or implicit guarantee.Version RecordVersionUpdate DateDescriptionV1.0.001/12/2017First edition.V2.0.005/17/2017Second edition of M210-AM datasheet
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 3 of 38About this DatasheetPurpose and ScopeThe M210-AM are complete Verizon Wireless certified LTE Category M1modules including base-band, RF and memory, for the design of connectedmachine-to-machine devices, and other Internet-of-Things devices withembedded LTE connectivity. This document provides technical informationabout M210-AM LGA module. M210-AM are based on Sequans’ Monarchplatform.Who Should Read this DatasheetThis document is intended for engineers who are developing User Equipment(UE) for LTE systems.References[1]• Verizon Wireless Unified Module Process for Compliance Testing and Approval, Version 12.0; Feb2015•Verizon Wireless Device Requirements LTE 3GPP Band 13 Network Access, Version 29.00; June2016•Verizon Wireless Device Requirements LTE 3GPP Multi-Band Network Access, Version 3.00; June2016
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 4 of 38[2]Core technology specifications:•3GPP E-UTRA 21 series Release 13 (EPS)•3GPP E-UTRA 22 series Release 13 (IMEI)•3GPP E-UTRA 23 series Release 13 (NAS, SMS)•3GPP E-UTRA 24 series Release 13 (NAS)•3GPP E-UTRA 31 series Release 13 (UICC)•3GPP E-UTRA 33 series Release 13 (security)•3GPP E-UTRA 36 series Release 13 (RAN)• 3GPP2 C.S0015-A v1.0 (SMS)• IETF, RFC 3261, 4861, 4862, 6434For more information, see•ftp://ftp.3gpp.org/Specs/archive/•http://www.3gpp2.org/public_html/specs/CS0015-0.pdf•https://tools.ietf.org/html/[3]Test specifications:3GPP E-UTRA 36 series Release 13 (RAN)ftp://ftp.3gpp.org/Specs/archive/[4]Vocabulary reference:•3GPP TR 21.905: "Vocabulary for 3GPP Specifications"For more information, see http://www.3gpp.org/ftp/specs/archive/21_series/21.905/Changes in this DocumentThis is the first edition of the document.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 5 of 38Documentation ConventionsThis section illustrates the conventions that are used in this document.General ConventionsNoteImportant information requiring the user’s attention.CautionA condition or circumstance that may cause damage to the equipment or loss ofdata.WarningA condition or circumstance that may cause personal injury.ItalicsItalic font style denotes•emphasis of an important word;•first use of a new term;•title of a document.Screen NameSans serif, bold font denotes•on-screen name of a window, dialog box or field;•keys on a keyboard;•labels printed on the equipment.Software ConventionsCodeRegular Courier font denotes code or text displayed on-screen.CodeBold Courier font denotes commands and parameters that you enter exactly asshown. Multiple parameters are grouped in brackets [ ]. If you are to choose onlyone among grouped parameters, the choices are separated with a pipe: [parm1 |parm2 | parm3] If there is no pipe separator, you must enter each parameter:[parm1 parm2 parm3]CodeItalic Courier font denotes parameters that require you to enter a value orvariable. Multiple parameters are grouped in brackets [ ]. If you are to chooseonly one among grouped parameters, the choices are separated with a pipe:[parm1 | parm2 | parm3] If there is no pipe separator, you must enter a value foreach parameter: [parm1 parm2 parm3]
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 6 of 38Table of ContentsAbout this Datasheet............................................................................................................. 3Purpose and Scope................................................................................................................................... 3Who Should Read this Datasheet........................................................................................................... 3References.................................................................................................................................................. 3Changes in this Document........................................................................................................................4Documentation Conventions.................................................................................................................... 5Table of Contents....................................................................................................................61 Product Features................................................................................................................ 81.1 Features Description................................................................................................................ 82 FCC Regulation Warning...............................................................................................13• Manual Information To the End User....................................................................................13• Federal Communication Commission Interference Statement.........................................13• Radiation Exposure Statement.............................................................................................. 13• End Product Labeling.............................................................................................................. 14This device is intended only for OEM integrators under the following conditions:...........143 Physical Characteristics............................................................................................... 153.1 ECCN and Part Number.......................................................................................................... 153.2 Electrical Operating Conditions.............................................................................................. 163.2.1 Detailed Information.................................................................................................................... 163.2.2 M210-AM Power Tree................................................................................................................. 163.2.3 Power Supplies Environment.................................................................................................... 183.3 Environmental Operating Conditions..................................................................................... 193.3.1 Temperature..................................................................................................................................193.3.2 Humidity......................................................................................................................................... 193.4 Power Supply Dimensioning................................................................................................... 203.5 I/O Characteristics.................................................................................................................... 213.6 Performance.............................................................................................................................. 25
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 7 of 383.7 Component Reliability.............................................................................................................. 263.8 Package Description.................................................................................................................263.8.1 Module Footprint.......................................................................................................................... 263.8.2 Marking Information.....................................................................................................................303.9 Packing Information..................................................................................................................303.10 Storage Conditions.................................................................................................................303.11 Mounting Considerations.......................................................................................................314 Signal and Pins................................................................................................................. 324.1 M210-AM Pinout....................................................................................................................... 324.2 UART Interfaces........................................................................................................................334.2.1High-Speed UARTs................................................................................................................ 334.3 Power-up Sequence.................................................................................................................334.4 LTE Low Power Mode..............................................................................................................35A Acronyms......................................................................................................................... 36
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 8 of 381 Product Features1.1Features DescriptionM210-AM modules include Monarch SQN3330 Cat-M1 baseband, a completedual band RF front end, memory and required circuitry to meet 3GPP E-UTRA (Long Term Evolution - LTE, Release 13 set of specifications) andVerizon Wireless LTE Cat-M1 UE specifications.For more information on the core technology specifications see the sectionReferences on page 3. The terms M210-AM module refer to the hardwareand the associated embedded software.The architecture block diagram of the M210-AM is presented on Figure 1-1.Figure 1-1: M210-AM-00 Block DiagramM210-AM-00
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 9 of 38Table 1-1 on page 10 provides detail on general features of the M210-AM.Table 1-2 on page 11 provides detail for the LTE-relatedfeatures of the M210-AM.M210-AM’s ECCN and part number are detailed in the Section 3.1 ECCN andPart Number on page 15.Table 1-1: General FeaturesGeneral interfaces•JTAG•I2C (reserved)•USIM•SPI (reserved)•GPIO•UART (x3, including one reserved)Supported Frequency Bands•LTE Band 4•LTE Band 13Operation voltages•Vbat1 (range from 3.1 V to 4.5 V)Packaging•LGA module• 108 pads (21.35 x 20.25 x 1.79 mm)•RoHS compliant, halogen-free
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 10 of 38Operating temperature•RF compliant -30°C to +60°C (ambient)•Operational: -40°C to +85°C (board)See also Section 3.3 Environmental Operating Conditions on page 19.Humidity• 10% to 85%See also Section 3.3 Environmental Operating Conditions on page 19.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 11 of 38Table 1-2: LTE FeaturesStandard compliance•3GPP E-UTRA Release 13 compliantPHY•One UL and one DL transceiver•Support of HD-FDD Duplexing•Category M1 UE•Channel 1.4 MHz bandwidth•Normal and extended cyclic prefix•Support of MPDCCH•Modulation-DL: QPSK, 16QAM-UL: QPSK, 16QAM•All coding schemes corresponding to modulations•All channel coding (turbo-coding with interleaver, tail biting convolutional coding,block and repetition coding) and CRC lengths•Sounding (including in special subframes)•Control and data in special subframes•All power control schemes and DL power allocation schemes•HARQ Incremental Redundancy and Chase Combining, with bundling or multi-plexing•Measurements and computations related to CQI (Channel Quality Indicator), PMI(Pre-coding Matrix Indicator) and RI (Rank Indicator), RSRP, and RSRQ•UEPCOP (from 3GPP Release 12) Power Saving ModeMAC•Random Access procedure in normal and special subframes•Scheduling Request, Buffer Status Reporting, and Power Headroom Reporting•Discontinuous reception (DRX, eDRX) with long and short cycles•Fast scanning•Hosted configuration•IPv4, IPv6•RoHC•Location based services•Advanced QoS featuresRLC•ARQ modes: UM, AM, and TMPDCP•Ciphering and deciphering: NULL, AES, SNOW 3G•Integrity and protection: AES, SNOW 3GRRC•MIB and new SIB1bis•Intra and inter-frequency measurements and handover•Up to 8 Data Radio Bearers supported•Support of CE (Coverage Extension) Mode
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 12 of 38Table 1-2: LTE Features (Continued)NAS and above•NAS•SMS over SG•LWM2M Client
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 13 of 382 FCC Regulation Warning•Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the enduser regarding how to install or remove this RF module in the user'smanual of the end product which integrates this module.The end user manual shall include all required regulatory informa-tion/warning as show in this manual.•Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful inter-ference, and (2) this device must accept any interference received,including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interferenceto radio communications.However, there is no guarantee that interference will not occur in a partic-ular installation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by oneof the following measures:–Reorient or relocate the receiving antenna.–Increase the separation between the equipment and receiver.–Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.–Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party respon-sible for compliance could void the user's authority to operate this equip-ment. This transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter.•Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment should be installed andoperated with minimum distance 20 cm between the radiator & your body.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 14 of 38•End Product LabelingWhen the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: "Contains FCC ID: ZMOM210AM".The grantee's FCC ID can be used only when all FCC compliance require-ments are met.This device is intended only for OEM integrators under the followingconditions:1.The antenna must be installed such that 20 cm is maintained between theantenna and users,2.The transmitter module may not be co-located with any other transmitteror antenna.3.To comply with FCC regulations limiting both maximum RF output powerand human exposure to RF radiation, the maximum antenna gainincluding cable loss in a mobile exposure condition must not exceed:Standalone Condition:•10 dBi in 700 MHz Band•6 dBi in 1700 MHz BandAssuming collocated with an ordinary WLAN/WiMax transmitter with 34dBm average EIRP power•6.5 dBi in Cellular band•6 dBi in PCS bandRemark: This assumption is not valid if the output power of the collocatedWLAN/ WiMax transmitter is higher than 34 dBm.In the event that these conditions cannot be met (for example certain laptopconfigurations or co-location with another transmitter), then the FCCauthorization is no longer considered valid and the FCC ID cannot be usedon the final product. In these circumstances, the OEM integrator will beresponsible for re-evaluating the end product (including the transmitter)and obtaining a separate FCC authorization.4.The product using this module must also comply with the maximumantenna gain to meet FCC EMC and RF exposure related limits. Themodular grant lists those maximum gain values.5.The OEM integrator needs show that the product hosting this moduleneeds to be compliant with radiated and conducted emissions limits forunintentional radiators (digital devices) per 15B testing (limits in part15.107 and 15.109, respectively).
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 15 of 383 Physical Characteristics3.1ECCN and Part NumberThe ECCN and orderable part number of the M210-AM modules will beprovided in a future revision of the document.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 16 of 383.2Electrical Operating Conditions3.2.1Detailed InformationTable 3-1: Electrical Operating Conditions for M210-AMDirectionMinimumTypicalMaximumVBAT1In3.1 V4.5 VSIM_VCC (1.8 V or 3.0 V)Out1.62 V1.8 V1.98 V2.7 V3.0 V3.3 V1V8See note below.Out1.71 V1.8 V1.89 V3V0Out2.85 V3.0 V3.15 VVCC1_PAIn2.85 V3.0 V3.3 VVCC2_PAIn2.85 V3.0 V3.3 VNote: 1.The maximum current consumption allowed from the 1V8 refer-ence pin is 100 mA.2.Each output reference voltage (1V8, 3V0) can be either runningor powered off depending on the internal softwareconfiguration. They should not be used to power external IC orparts that require permanent supply.3.2.2M210-AM Power TreeFigure 3-1 provides a representation of the power tree of the M210-AM.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 17 of 38Figure 3-1: M210-AM Power Tree
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 18 of 383.2.3Power Supplies EnvironmentFigure 3-2 illustrates the connections between the RF front-end powersupplies of the M210-AM.Figure 3-2: M210-AM LTE RF Front-End Power Supplies DiagramM210-AM
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 19 of 383.3Environmental Operating Conditions3.3.1Temperature•RF compliant: -30°C to +60°C (ambient)•Operational, with additional software to limit TxPower: -40°C to +85°C(measured on board)•Storage: -40°C to +85°C3.3.2Humidity•Operating: 10% to 85% (non condensing)•Storage: 5% to 85% (non condensing)
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 20 of 383.4Power Supply DimensioningImportant: - Information provided here is estimated peak current consump-tion for the M210-AM Module in various LTE Tx/Rxconfigurations, with and without DC/DC losses.-Average and detailed power consumption figures are providedin Sequans’ Software Release Notes.Table 3-2: Estimated Peak Current and Peak Power Consumption(LTE Band 13)EstimatedPeak PowerConsumptionEstimated Battery PeakCurrent (forVBAT1=4.2 V)TXTX Power = 23 dBm1.8 W430 mATX Power = 20 dBm1.6 W380 mATX Power = 18 dBm1.5 W360 mATX Power = 13 dBm1.3 W310 mARX1.1 W260 mA
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 21 of 383.5I/O CharacteristicsThe voltage and current characteristics of the various IO pads of the M210-AM versus IO bank supply voltage are illustrated in the tables below.Caution:Note that the Voh values in the tables below do not apply toGPIOs configured in open drain mode. GPIOs can be individuallyconfigured in open drain mode. When in open drain mode theyeither drive the line to Vol, or leave it floating, to be pulled up byan external pullup resistance. The PCB designer must ensure thatthe voltage on these pads never exceeds Vih of the IO group towhich they belong.Refer to M210-AM Pin List to know the type of IO pad used on everytermination.•The Minimum values for Iol and Ioh should not be exceeded to guaranteethat the logical level are not spoiled for each pad type.•The Nominal values for Iol and Ioh represent the nominal values for the padtype. They are provided for information only.•The Maximum values for Iol and Ioh represent the maximal values for thepad type. They are provided for information only.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 22 of 38Table 3-3: DC Characteristics for Digital IOs, Voltage 1.8 VParameterDriveStrengthMin.Nom.Max.UnitVILInput Low Voltage-0.30.63VVIHInput High Voltage1.173.6VVTThreshold Point0.790.870.94VVT+Schmitt Trigger Low to High Threshold Point11.121.22VVT-Schmitt Trigger High to Low Threshold Point0.610.710.8VVT PUThreshold Point with Pull-up Resistor Enabled0.790.860.93VVT PDThreshold Point with Pull-down Resistor Enabled0.80.870.95VVT+ PUSchmitt Trigger Low to High Threshold Point withPull-up Resistor Enabled11.121.21VVT- PUSchmitt Trigger High to Low Threshold Point withPull-up Resistor Enabled0.610.70.8VVT+ PDSchmitt Trigger Low to High Threshold Point withPull-down Resistor Enabled1.011.131.23VVT- PDSchmitt Trigger High to Low Threshold Point withPull-down Resistor Enabled0.620.720.81VIIInput Leakage Current @ VI=1.8V or 0V±10µAIOZTri-state Output Leakage Current @ VO=1.8V or 0V±10µAInput Capacitance3pF
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 23 of 38Table 3-3: DC Characteristics for Digital IOs, Voltage 1.8 V - BIDIR and IN TypesParameterDriveStrengthMin.Nom.Max.UnitRPUPull-up Resistor5689148kOhmRPDPull-down Resistor5290167kOhmVOLOutput Low Voltage0.45VVOHOutput High Voltage1.35VIOLLow Level Output Current at VOL(max)2 mA1.22.23.6mA4 mA2.34.37.1mA8 mA4.68.614.3mAIOHHigh Level Output Current at VOH(max)2 mA1.02.44.6mA4 mA2.04.79.2mA8 mA4.09.418.4mATable 3-4: DC Characteristics for IN_PMU TypeParameterDriveStrengthMin.Nom.Max.UnitVILInput Low Voltage-0.30.4VVIHInput High Voltage1.1VBAT1 +0.3VTable 3-5: DC Characteristics - BIDIR_WAKE TypeParameterMin.Nom.Max.UnitVILInput Low Voltage0.2V
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 24 of 38PHYSICALCHARACTERISTICSPERFORMANCETable 3-5: DC Characteristics - BIDIR_WAKE Type (Continued)ParameterMin.Nom.Max.UnitVIHInput High Voltage. See note below related tomaximum value.0.83.6VVOLOutput Low Voltage0VVOHOutput High Voltage1.61.8V
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 25 of 383.6PerformanceTable 3-5 and Table 3-6 present the M210-AM module’s performance in LTEBand 4 and Band 13.Table 3-5: Output PowerLTE BandFrequency(kHz)TCHConducted Power (dBm)Bandwidth 1.4 MHz, FullRBBand 137795002320523 +2/-2.77820002323023 +2/-2.77845002325523 +2/-2.7Band 417125001997523 +2/-2.717325002017523 +2/-2.717525002037523 +2/-2.7Table 3-6: RF SensitivityLTE BandFrequency(kHz)TCHTyp. Sensitivity level(dBm)Bandwidth 1.4 MHzBand 137485005205-1037510005230-1037535005255-103Band 421125001975-10321325002175-10321525002375-103
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 26 of 383.7Component ReliabilityNote:Information related to component reliability will be provided in afuture edition of this document.3.8Package Description3.8.1Module FootprintThe dimensions marked in Figure 3-4 are listed in Table 3-7.Figure 3-4: Top and Side View of the M210-AM
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 27 of 38Table 3-7: M210-AM Outline DimensionsMarkMinimum (mm)Nominal (mm)Maximum (mm)A21.2521.3521.45B20.1520.2520.35C1.711.791.94DNot AvailableNot Available0.08
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 28 of 38The dimensions marked in Figure 3-5 are listed in Table 3-8.Figure 3-5: M210-AM Bottom Side View of PadsTable 3-8: M210-AM Dimensions and TolerancesMarkDimension and tolerance (mm)L21.35 ± 0.1W20.25 ± 0.1A112 ± 1.0A24.125 ± 0.5A310.8 ± 1.0A44.725 ± 0.5
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 29 of 38Table 3-8: M210-AM Dimensions and Tolerances (Continued)MarkDimension and tolerance (mm)A50.6 ± 0.05A61.2 ± 0.1A70.6 ± 0.05B10.9 ± 0.1B20.325 ± 0.05B30.6 ± 0.05B419.2 ± 0.2B518 ± 0.2B61.075 ± 0.1B71.675 ± 0.15C16.125 ± 0.5C26.8 ± 0.5C31.2 ± 0.01C40.5 ± 0.05D10.5 ± 0.05D20.9 ± 0.1D37 ± 0.5D46.725 ± 0.5D518.9 ± 0.2D615.9 ± 0.2
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 30 of 383.8.2Marking InformationFigure 3-6: M210-AM-00 Marking Description3.9Packing InformationThe module is delivered in Tape-and-Reel.Note:Details about packing of the modules will be provided in a futurerevision of this document.3.10Storage ConditionsNote:Additional storage conditions impacting the mounting processare provided in Section 3.11 Mounting Considerations on page 31.1.Calculated shelf life in sealed bag : 12 months at < 40°C and < 90% RH2.Peak package body temperature: 250°C3.After bag is opened, devices that will be subjected to reflow solder or otherhigh temperature process must be:
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 31 of 38a)mounted within 168 hours of factory conditions ≤ 30°C/60%RH, orb)Stored as per J-STD-0334.Devices require bake, before mounting, ifa)Humidity Indicator Card reads >10% for level 2a-5a devices or >60% forlevel 2 devices when read at 23±5°Cb)3a or 3b above are not met5.If baking is required, refer to IPC/FEDEC J-STD-033 for bake procedure.Note:Level and body temperature are defined by IPC/JEDECJ-STD-020.3.11Mounting ConsiderationsThis section provides reflow information.Note:Details will be provided in a future revision of this document.The M210-AM can support up to 3 reflows with 250°C maximum.Table 3-10: Reflow ParametersParameterSettingPeak package body temperatureTo be definedLiquidous TimeTo be definedPreheat/SoakTo be definedRamp-up rateTo be definedRamp-down rateTo be defined
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 32 of 384 Signal and Pins4.1M210-AM PinoutThe signals and all the related details are listed in the MS-Excel companionfile delivered together with the present document in a PDF portfolio.The pads listed in Table 4-1 are connected to ground.Table 4-1: Ground and Thermal PadsPad #PadNameComment1 20 22 24 26 28 30 31 32 33 34 42 43 45 465355 62 63 64 65 66 68 69 70 71 72 73 74 86 87GNDAll GND pads shall be connected to thesame copper.T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11T12 T13 T14 T15 T16 T17 T18 T19 T20T21 T22 T23 T24 T25 T26 T27 T28 T29T30GNDT1 to T30 pads are used as both GND andthermal drops.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 33 of 384.2UART Interfaces4.2.1High-Speed UARTsFigure 4-1 represents the typical implementation for the hardware flowcontrolfor UART0, UART1 and UART2. TDX and RDX signals are mandatory. RTSand CTS are strongly recommended.The other signals are optional.M210-AM are designed for use as DCE (Data Communication Equipment).Based on the conventions for DCE-DTE connections, the DCE device willcommunicate with the customer application (DTE) using the followingsignals:•Port TXD on Application sends data to the module’s TXD signal line.•Port RXD on Application receives data from the module’s RXD signal line.Figure 4-1: UART0, UART1 and UART2 Signals Convention and FlowControlNote:CLK signals can be input or output.4.3Power-up SequenceM210-AM
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 34 of 38The following timing requirement applies to the signals VBAT1,MODULE_PWR_EN and RESET_N. It must be respected for proper M210-AM’s behavior.Figure 4-3: VBAT1, MODULE_PWR_EN and RESET_N Signals TimingRequirement for Cold StartFigure 4-4: VBAT1, MODULE_PWR_EN and RESET_N Signals TimingRequirement for Warm StartFigure 4-5: VBAT1, MODULE_PWR_EN and RESET_N Signals TimingRequirement for Reset CycleThe timing minimum values are listed in Table 4-3.Table 4-3: VBAT1, MODULE_PWR_EN and RESET_N Signal Timing ValuesSymbolDescriptionMinimum DurationMaximum DurationtsVBAT1 setup time1 ms-ts1RESET_N setup time1 ms-th1RESET_N hold time1 µs-
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 35 of 384.4LTE Low Power ModeImportant: The M210-AM module is provided with an internal RTC whosesupply is VBAT1. As a consequence, VBAT1 should not beremoved, in order to keep RTC active.The M210-AM will automatically enter in low-power mode. M210-AM can bewoken from low power mode by external sources through:•SIM_DETECT input signal to cope with SIM card insertion into a SIM cardconnector with built-in hardware detection. The default configuration towake-up the module is a low-to-high transition.•The RTS0 input signal whenever data traffic is initiated by the hostconnected to the module UART0 with hardware flow control; The defaultconfiguration to wake-up the module is a high-to-low transition.•Two dedicated input signal WAKE0 and WAKE1; The default configura-tion to wake-up the module is on a high-to-low transition. This can bemodified by software. As example, these signals can be used to detect analarm from an external IC such as a sensor. Software can disable thewake-up functionality on these signals.Important: WAKE inputs are detected on level (configurable by softwareto 0 or 1) that must last at least 5 periods of the 32 kHz clock,that is 156.25 ìs.•A subset of GPIO input signals: GPIO2, GPIO3, GPIO25, GPIO27, GPIO42;they are not configured by default as wake-up source but software canconfigure them for future use.To get the lowest possible power consumption during low-power mode, allIOs must be stable. At software configuration time, take care of the following,to prevent them from being in conflict or floating:•Pads that are not driven by an external device shall be driven low by soft-ware if they have a GPIO or RFDATA mode that allows it.•For pads that are known to be driven by an external device:Configure that external device to hold the signal stable during low-powermode, and configure M210-AM to treat that pin as an input, withoutinternal pull-up or pull-down.•For pads where, at the time of low-power mode, the signal may or may notbe driven by an external device:Configure M210-AM to enable the internal pull-up/pull-down on the pad toguarantee that it will not be floating during low-power mode.Note:Each signal’s pull (up or down) is determined by register. It canbe modified by software. Please see the default configuration inthe signal’s list.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 36 of 38AAcronymsAcronymDefinitionAFEAnalog Front-EndAPCAutomatic Control PowerAPTAverage Power TrackingCECoverage ExtensionCOOCountry of originCPUCentral Processing UnitDC/DCDirect current converterDLDownlinkDPLLDigital Phase-Locked LoopECCNExport Control Classification NumberEPSEvolved Packet SystemESDElectro-static dischargeETSIEuropean Telecommunications Standard InstituteGNDGroundGNSSGlobal Navigation Satellite System. Superset for systems such as GPS, Galileo,Glonass, BeiDou or QZSS among others.GPIOGeneral Purpose Input OutputHBMHuman Body Model (ESD)I/OInput/OutputI2CInter-integrated circuit (bus)
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 37 of 38AcronymDefinitionIMEIInternational Mobile Equipment IdentityIMSInstant Messaging ServiceIPInternet ProtocolJTAGJoint Test Action Group. See IEEE 1149.7 specificationLDOLow Drop-Out regulatorLGALarge Grid ArrayLNALow-Noise AmplifierLTELong Term Evolution, or 4G. Standard is developed by the 3GPPwww.3gpp.org.MMMachine Model (ESD)NASNetwork Access ServerNVMNon Volatile MemoryOMADMOpen Mobile Alliance Device ManagementPCBPrinted Circuit BoardPHYPhysical LayerPLLPhase-Locked LoopPMICPower Management Integrated CircuitpSRAMPseudo-Static Random Access MemoryQTYQuantityRAMRandom Access MemoryRBResource BlockRFRadio FrequencyRFICRF Integrated CircuitRoHSRestriction of Hazardous SubstancesRTCReal-Time ClockRxReception
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.M210-AM Datasheet Page 38 of 38AcronymDefinitionS/Nor SN: Serial NumberSAWSurface Acoustic Wave (filters)SDMSocketed Device Model (ESD)SIMSubscriber Identification ModuleSMSShort Message ServiceSPISerial Peripheral InterfaceTCXOTemperature-controlled crystal oscillatorTxTransmissionUARTUniversal asynchronous receiver transmitter.UEUser EquipmentUICCUniversal integrated circuit card (SIM)ULUplinkXTALCrystal

Navigation menu