First Computer CE260A Notebook PC User Manual for CE260 CE261

Download:
Mirror Download [FCC.gov]
Document ID	863673
Application ID	tZbCNFlNOMSHgiLmZiEOrw==
Document Description	Original User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.82kB (1010206 bits)
Date Submitted	2007-11-04 00:00:00
Date Available	2007-11-07 00:00:00
Creation Date	2007-07-31 15:13:32
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-07-31 15:13:32
Document Title	Microsoft Word - User manual for CE260-CE261.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	elise.tang

CE260/1
UMPC
User Guide
UMPC
User Guide
Copyright©2007
All Rights Reserved - Printed in Taiwan
CE260 UMPC User Guide
Original Issue: 2007/06
This manual guides you in setting up and using your new UMPC (UltraMobility personal computer). Information in this manual has been carefully
checked for accuracy and is subject to change without notice.
No part of this manual may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopy,
recording, or otherwise, without prior written permission.
Trademarks
Product names used herein are for identification purposes only and may be the
trademarks of their respective companies.
Microsoft, Windows XP, Windows Vista, and Windows Sound System are
trademarks of Microsoft Corporation.
VIA C7TM M is registered trademark of VIA Technologies, Inc.
Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.
All other brands or product names mentioned in this manual are trademarks or
registered trademarks of their respective companies.
N
otebook User Guide
FCC Information to User
Safety and Care Instructions
No matter what your level of experience with UMPCs, please make sure you
read the safety and care instructions. This information can help protect you
and your UMPC from possible harm.
For Safety Regulation:
Risk of explosion if battery is replaced by an incorrect type.
Li-Ion battery is vulnerable, do not charge it with other power
adapter, or it may cause fire or explosion.
For the power supply of this equipment,
⇓
An approved power cord has to be used.
⇓
Make sure the socket and any extension cord(s) you use can
support the total current load of all the connected devices.
⇓
Before cleaning the UMPC, make sure it is disconnected from
any external power supplies (i.e. AC adapter).
Radio and television interference
Warning: Use the specified shielded power cord and shielded signal cables
with this UMPC, so as not to interfere with radio and television reception. If
you use other cables, it may cause interference with radio and television
reception.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
UMPC
User Guide
installation. If this equipment does not cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encourage to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the device and receiver
•
Connect the device into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
You may find helpful the following booklet, prepared by the Federal
Communications Commission: Interference Handbook (stock number 004000-00345-4). This booklet is available from the U.S. Government Printing
Office, Washington, DC20402
Warning: The user must not modify or change this UMPC without approval.
Modification could void authority to this equipment.
FCC RF Exposure
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
15.247 (b)(4), the EUT meets the requirement that it be operated in a manner
that ensures the public is not exposed to radio frequency energy levels in
excess of the Commission’s guidelines (1.1307, 1.1310, 2.1091 and 2.1093)
N
otebook User Guide
This device has been tested for compliance with FCC RF Exposure (SAR)
limits in the typical laptop computer configuration and this device can be used
in desktop or laptop computers with side mounted PCMCIA slots. This device
cannot be used with handheld PDAs (personal digital assistants). This device
and its antenna must not be co-located or operated in conjunction with any
other antenna or transmitter.
Information of the responsible party for a DoC product
Product name: UMPC PC
Model number: CE260
Technical Support:
Address: 6FL., No.300 Yang Gunag St., Neihu, Taipei, Taiwan
Telephone:+886-2-8751-8751 ext.7935
Fax: +886-2-87518822
Emaill: rex_kuo@pcg.fic.com.tw
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
5.105 Federal Communications Commission (FCC) Requirements, Part
15
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
UMPC
User Guide
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
5.21 Regulatory information / Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance
with the instructions included in the user documentation provided with the
product. Any changes or modifications (including the antennas) made to this
device that are not expressly approved by the manufacturer may void the user’s
authority to operate the equipment. The manufacturer is not responsible for
any radio or television interference caused by unauthorized modification of
this device, or the substitution of the connecting cables and equipment other
than manufacturer specified. It is the responsibility of the user to correct any
interference caused by such unauthorized modification, substitution or
attachment. Manufacturer and its authorized resellers or distributors will
assume no liability for any damage or violation of government regulations
arising from failing to comply with these guidelines.
Canadian Department of Communications Compliance
Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Shielded Cables Notice
N
otebook User Guide
All connections to other computing devices must be made using shielded
cables to maintain compliance with FCC regulations.
Peripheral Devices Notice
Only peripherals (input/output devices, terminals, printers, etc) certified to
comply with Class B limits may be attached to this equipment. Operation with
non-certified peripherals is likely to result in interference to radio reception.
Caution
Changes or modifications not expressly approved by the manufacturer may
void the user’s authority, which is granted by the Federal Communications
Commission, to operate this UMPC.
Use Conditions
This part complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
European Notice
For the following equipment: UMPC
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC), Lowvoltage
Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC), the procedures given in European Council Directive
UMPC
User Guide
99/5/EC and 89/3360EEC.
The equipment was passed. The test was performed according to the
following European standards:
EN 300 328 V.1.6.1 (2004)
EN 301 489-1 V.1.3.1 (2001) / EN 301 489-17 V.1.2.1 (2001)
EN 301 893 V.1.3.1 (2004)
EN 50371 (2002)
EN 60950 (2000)
EN 55022: 2001
EN 55024: 2001
EN 60950: 2000
EN 61000-3-2: 2000
EN 61000-3-3: 1995 + A1: 2001
802.11b & 802.11g Restrictions:
- European standards dictate maximum radiated transmit power of 100mW
EIRP
and frequency range 2.400-2.4835GHz;
- In France, the equipment must be restricted to the 2.4465-2.4835GHz
frequency range and must be restricted to indoor use."
N
otebook User Guide
About Your UMPC
Congratulation for having purchased your new UMPC. This
UMPC incorporates the newest features to serve your daily
needs easily for anywhere you go.
UMPC
User Guide
About Your User Guide
Welcome to your New UMPC User Guide. This manual
introduces you to the basic concepts of your new UMPC.
This manual is divided into eight chapters.
Chapter 1
Introduction
Chapter 2
Getting Started
Chapter 3
Using Your UMPC
Chapter 4
Multimedia Setup
Chapter 5
Connecting External devices
Chapter 6
System BIOS Setup
Chapter 7
Upgrade Options
Chapter 8
Care and Maintenance
Appendix A System Specifications
10
N
otebook User Guide
Table of Contents
ABOUT YOUR UMPC.............................................................................. 9
ABOUT YOUR USER GUIDE............................................................... 10
INTRODUCTION............................................................................. 15
1.1
1.2
1.3
1.4
1.5
1.6
1.7
FEATURE HIGHLIGHT ..................................................................... 16
UNPACKING THE UMPC................................................................ 17
THE INSIDE OF THE UMPC............................................................. 18
UMPC Status Icons ...................................................................... 21
HE LEFT SIDE OF THE UMPC......................................................... 22
HE RIGHT SIDE OF THE UMPC....................................................... 23
THE UNDERSIDE OF THE UMPC .................................................... 25
UMPC ACCESSORIES .................................................................... 26
GETTING STARTED ...................................................................... 27
2.1
2.2
2.3
2.4
2.5
USING THE BATTERY PACK ........................................................... 28
Extending Battery Life.................................................................. 30
CONNECTING THE AC POWER SOURCE .......................................... 31
STARTING YOUR UMPC................................................................ 32
ADJUSTING THE DISPLAY CONTROLS ............................................ 33
DEVICE DRIVERS INSTALLATION ................................................... 33
Installing Windows XP from Optical Disk Drive............................ 34
Installing the Chipset Driver ........................................................ 34
Installing the VGA Device Driver ................................................ 35
Installing the Audio Device Driver............................................... 35
Installing the Hotkey Utility ......................................................... 36
Installing the Wireless LAN Device Driver .................................. 36
Installing Bluetooth Device Driver .............................................. 37
Installing the LAN Device Driver................................................. 37
11
UMPC
2.6
3.3
3.4
3.5
3.6
3.7
STARTING YOUR OPERATING SYSTEM .......................................... 42
UNDERSTANDING THE KEYBOARD FUNCTIONS ............................. 42
Basic Keyboard Functions ........................................................... 44
Cursor Control Keys .................................................................... 46
Screen Control Keys..................................................................... 46
Windows Hot Keys........................................................................ 47
Special Function Keys .................................................................. 47
USING THE TOUCHPAD POINTING DEVICE ....................................... 49
CONFIGURING YOUR SCREEN DISPLAY ......................................... 50
Possible Display Configurations.................................................. 51
Changing the Display Properties under Windows.................................. 52
KNOWING THE POWER SAVING FEATURES .................................... 52
WORKING WITH THE BUILT-IN HDD............................................... 53
USING FLASH MEMORY CARDS ..................................................... 54
What is Flash Memory Card? ...................................................... 54
FUN WITH MULTIMEDIA .................................................................. 57
4.1
4.2
4.3
4.4
4.5
4.6
12
Installing the Touch Panel Device Utility .................................... 38
Installing the Care Reader Device Driver ................................... 38
TURNING OFF YOUR UMPC .......................................................... 39
USING YOUR UMPC ...................................................................... 41
3.1
3.2
User Guide
UMPC MULTIMEDIA FEATURES ................................................... 58
AUDIO SOUND SYSTEM FEATURES ................................................ 58
SETTING UP THE AUDIO DRIVER PROPERTIES ................................ 59
WINDOWS MULTIMEDIA PROGRAMS ............................................. 59
RECORDING SOUNDS ..................................................................... 60
Using an External Microphone .................................................... 63
Using the Built-in Combo Drive................................................... 63
PLAYING AUDIO AND SOUND ........................................................ 64
Using the Windows Media Player ................................................ 65
N
otebook User Guide
4.7
CONNECTING TO PERIPHERALS ............................................. 67
5.1
5.2
5.3
5.4
5.5
PLAYING VIDEO AND MPEG FILES ............................................... 65
USING THE USB PORT ................................................................... 68
USING AN EXTERNAL DVI-I PORT ....................................................... 69
USING THE EXTERNAL AUDIO SYSTEM.......................................... 70
USING THE LAN PORT................................................................... 71
USING THE WIRELESS LAN........................................................... 72
CUSTOMIZING YOUR UMPC......................................................... 73
6.1
6.2
RUNNING THE BIOS SETUP PROGRAM .......................................... 74
USING THE MAIN MENU SETUP ..................................................... 76
6.2.1 Internal HDD Sub-Menu................................................... 78
.6.3 USING THE ADVANCED CMOS SETUP ........................................... 79
6.4 SECURITY MENU SETUP ................................................................ 80
6.5 USING THE BOOT SETUP ................................................................ 82
6.6 HOW TO EXIT THE SETUP PROGRAM .............................................. 83
6.7 HOW TO UPGRADE THE BIOS........................................................ 84
USING OPTIONS ............................................................................. 85
SYSTEM UPGRADE ................................................................................... 86
7.1 MEMORY UPGRADE ....................................................................... 86
7.2 WIRELESS MODULE INSTALLATION ............................................... 86
CARING FOR YOUR UMPC ......................................................... 87
8.1
8.2
8.3
8.4
8.5
8.6
IMPORTANT SAFETY INSTRUCTIONS .............................................. 88
CLEANING YOUR UMPC ............................................................... 90
MAINTAINING THE LCD QUALITY................................................. 91
MAINTAINING YOUR HARD DISK .................................................. 91
BATTERY CARE GUIDELINES ......................................................... 92
WHEN YOU TRAVEL ...................................................................... 93
13
UMPC
User Guide
APPENDIX A SYSTEM SPECIFICATION........................................ 95
SYSTEM SPECIFICATION .......................................................................... 96
Processor Unit.............................................................................. 96
System Memory............................................................................. 96
LCD Display................................................................................. 96
VGA System .................................................................................. 96
Storage.......................................................................................... 97
Audio System ................................................................................ 97
Touchpad ...................................................................................... 97
Keyboard ...................................................................................... 97
Flash BIOS ................................................................................... 97
I/O Ports ....................................................................................... 97
Wireless devices ........................................................................... 98
AC/DC Power Supply Adapter ..................................................... 98
Battery .......................................................................................... 98
Weight and Dimension ................................................................. 98
14
1
Introduction
1 Introduction
Your UMPC is a fully Windows® compatible
portable computer. Slim, sleek and shinning through
with features, this UMPC is to match all the demands
for high performance computing and multimedia
technology.
Your UMPC runs a wide variety to customize your
special requirements, personal productivity,
entertainment, professional applications and
especially ideal for use on the road.
15
UMPC
1.1
User Guide
Feature Highlight
Before we identify each part of your UMPC, we will first introduce you to
other notable features of your UMPC.
Processing Unit
•
Your UMPC runs on VIA C7TM M microprocessor that is integrated with
128KB L2 Cache. Check with your dealer on the CPU type and speed.
•
Fully compatible with an entire library of PC software based on operating
systems such as Windows XP.
Memory
This UMPC provides one memory slot for installing DDRII SDRAM 200-pin
SODIMM modules up to 1GB using 256MB, 512MB, 1024MB DDRII
SDRAM modules.
Wide Screen LCD Display
Provides 7" 800 x 480 (16:10) wide screen LCD display.
Wireless LAN
IEEE 802.11b/g, USB Dongle Module.
USB 2.0
Provides two USB2.0 ports for fastest I/O data transmission.
Graphic System
Provides blazing graphics controller embedded in VX700 chipset
PCI Local Bus Architecture
16
1
Introduction
32-bit PCI Enhanced IDE optimizes the data transfer between the CPU and
PATA hard disk drives. Support ultra DMA ATA-66 PIO Mode up to PIO
Mode 4, bus mastering for LBA Scheme.
Audio System
Full-duplex 16-bit stereo audio system output. Sound Blaster compatible.
Flash BIOS
Flash BIOS allows you to easily upgrade the System BIOS using the Phoenix
Flash utility program.
Power and System Management
1.2
•
Integrated SMM (System Management Mode) on system chipset that shuts
down components not in use to reduce power consumption. To execute
power management, you can set up the parameter in Power Options
properties by pointing your mouse to Control Panel of Windows.
•
Closing the UMPC (lowering the cover) allows you to suspend the system
operation instantly and resume at the press of the power button.
•
System Password for User and Supervisor included on the BIOS SETUP
Program to protect unauthorized use of your UMPC.
Unpacking the UMPC
Your UMPC comes securely packaged in a sturdy cardboard shipping carton.
Upon receiving your UMPC, open the carton and carefully remove the
contents. In addition to this User Guide, the shipping carton should also
contain the following items:
The UMPC
17
UMPC
User Guide
An AC Adapter and AC Power Cord
Li-Ion Battery Pack
CD Driver Utility and User Guide
Quick Setup Manual
Carefully inspect each component to make sure that nothing is missing and/or
damaged. Be sure to save the shipping materials and the carton in case you
need to ship the UMPC or store for an extended period of time.
1.3
The Inside of the UMPC
The UMPC is compact with features on every side. First, look at the inside
of the system. The following sections describe inside features.
18
1
Introduction
1. Color Widescreen LCD Display
3. Keyboard
5. Customized Module
8. Touchpad Pointing Device
•
2.6 Built-in Stereo Speaker
4. LED Indicators
7. Power On/Resume Button
Color Widescreen LCD Display
The UMPC comes with a color LCD that you can adjust for a comfortable
viewing position. The LCD is 7” TFT color LCD with 800 x 480 (Wide
XGA with ratio 16:10) resolution panels. The features of the Color LCD
Display are summarized as follows:
⇓
TFT color LCD with Widescreen 7” 800 x 480 (Wide XGA)
resolution panels.
⇓
Capable of displaying 16M colors (32-bit true color)
⇓
LCD display control hot-keys allows you to adjust the brightness of
the LCD.
19
UMPC
⇓
20
User Guide
Simultaneous display capability for LCD and external desktop
computer monitor.
•
Built-in Stereo Speakers
Integrated mini stereo speaker provides sound and audio output for your
multimedia presentations or listening pleasure.
•
Keyboard
⇓
Standard QWERTY-key layout and full-sized 80 keys keyboard with
Windows system hot-keys, embedded numeric keypad, 8 hot keys,
inverted "T" cursor arrow keys, and separate page screen control
keys.
⇓
Wide extra space below the keyboard panel for your wrist or palm to
sit-on comfortably during typing.
•
LED Indicators
Keeps you informed of your UMPC current power status and operating
status. Description of the status icons appears in the latter part of this
section.
•
Customized Module
You can specify a detachable Web Camera, Skype phone, DVB-T digital
TV Tuner or GPS (global positioning system) module for this customized
one.
•
Power On/Resume Button
Switches the UMPC power on and off, or resumes whenever it is in
Suspend mode.
1
Introduction
•
Touchpad Pointing Device
Microsoft mouse compatible with two Touchpad click buttons. The two
select buttons located at each side of the Touchpad support tapping
selection and dragging functions. These buttons work like a standard
UMPC mouse. Simply move your fingertip over the Touchpad to control
the position of the cursor. Use the selection buttons at each side of the
Touchpad to select menu items.
UMPC STATUS ICONS
The Status LED Panel keeps you informed of the UMPC’s current power and
operating status. Each LED is marked with an icon to designate the system
status.
1. Battery Charging
3. WLAN/Bluetooth Access
•
2. Drive Access
4. Caps Lock
Battery Charging LED
Lights to indicate battery in charging status.
⇓
Lights orange to indicate that the battery is in charging.
⇓
When the light is off, it indicates the battery is fully charged or no
battery installed.
21
UMPC
1.4
User Guide
•
Drive Access
When LED turns on indicates that the system is accessing the Hard Disk
or Optical Disk Drive.
•
WLAN/Bluetooth Access
When LED turns on indicates that the wireless LAN module is activated.
When LED lights off, it indicates that the function is disabled.
•
Caps Lock
When LED turns on indicates that the Caps Lock key on the keyboard is
activated. When activated, all alphabet keys typed in will be in uppercase
or capital letters.
he Left Side of the UMPC
The left side of your UMPC provides the features shown in the following
figure.
1. Air-Outlet Vent
3. 4-in-1 card slot
22
2. DVI-I Port
1
Introduction
1.5
•
Air-Outlet Vent
Emits the heat out of your UMPC and keeps it within operating
temperature.
•
DVI-I Port
This socket can accept both analog signal (VGA) and digital signal (DVI)
inputs. The “DVI-I” is the abbreviation of “Digital Video InteractiveIntegrated”
•
4 in 1 card slot
The card slot supports SD, MMC, MS (Memory Stick) and MS_Pro flash
memory card format. You can use either of the 4 types flash memory
cards for extra storage media. Please pay attention to correct direction
when you insert the flash memory card. For more detail of flash card, you
can refer to Chapter 3.7
he Right Side of the UMPC
The right side of the UMPC offers the features shown in the following figure.
23
UMPC
User Guide
1. Microphone Jack
3. USB 2.0 Port
5. LAN Port
2. Headphone Jack
4. Air-Outlet Vent
6. DC Power Port
Right Side Features
24
•
Microphone Jack
Allows you to connect an external microphone for monophonic sound
recording directly into your UMPC.
•
Headphone Jack
Lets you plug in a stereo headphone, powered speakers, or earphone set
with 1/8 inch phono plug for personal listening.
•
USB 2.0 Port
The Universal Serial Bus (USB) port allows you to connect USB 2.0compliant devices (for example, printers, scanners and so on) to your
UMPC.
•
Air-Outlet Vent
Emits the heat out of your UMPC and keeps it within operating
temperature.
•
LAN Port
An internal 10Base-T/100Base-TX Ethernet LAN module connects your
UMPC to other computers/networks through a local area network (LAN).
•
DC Power Port
Lets you connect the AC power adapter in supplying continuous power to
your UMPC and recharging the battery.
1
Introduction
1.6
The Underside of the UMPC
The bottom of the UMPC offers the following features.
1. Battery Release Latch
3. Battery Bay
2. Battery Lock Latch
Bottom of the System
•
Battery Release Latch
To release the battery, first locate the Battery Lock Latch at the left side in
unlock status, then push the Battery Release Latch to the right end to
remove the battery pack.
•
Battery Lock Latch
Push the latch to the right side to lock and secure the battery. This action
is available to release the battery when the battery lock latch has located to
unlock status at the left side.
•
Battery Bay
Equipped with a choice of Lithium-Ion (Li-Ion) battery pack.
25
UMPC
1.7
User Guide
UMPC Accessories
AC Adapter
The AC Adapter supplies external power to your UMPC and charges the
internal battery pack simultaneously. The AC adapter has an auto-switching
design that can connect to any 100VAC ~ 240VAC power outlets. Change the
power cord if you are going to use your UMPC in countries with different
connector outlets.
When you connect the AC adapter, it charges the battery whether or not the
UMPC is powered on.
Battery Pack
Aside from the AC adapter, your UMPC can also be powered through the
internal battery pack. The battery pack uses rechargeable Lithium-Ion (Li-Ion)
battery cells that provide long computing hours when fully charged and power
management enabled. You should always leave the battery inside your UMPC
even when using the AC adapter as it also acts as a back-up power supply in
case power from the AC adapter is cut off. It is also very important to have the
battery pack always charged to prevent battery cell degradation.
26
Getting Started
Getting Started
Your UMPC is designed and pre-configured for
easy setup and use. This chapter describes the
installation steps you should follow to get the UMPC
up and running as quickly as possible.
27
UMPC
2.1
User Guide
Using the Battery Pack
The UMPC is designed to operate with one of the following power sources:
•
With AC power using the AC adapter connected to an electrical outlet.
•
With a Lithium-Ion (Li-Ion) battery pack.
You should use the AC adapter whenever it is possible, relying on the battery
pack only when AC power is unavailable.
Before you use your UMPC, install and recharge the battery pack first. The
rechargeable Li-Ion battery pack allows you to operate the UMPC without an
external power source. When you connect the AC power adapter, the battery
immediately starts to recharge. For maximum battery performance, fully
discharge the battery before recharging it the first time. To do so, unplug the
AC adapter, turn off power management features (through Setup and
Windows), and turn on the system. Once the battery is fully discharged, plug in
the AC adapter and recharge the battery.
If you do not discharge the battery completely, it fails to accept a full recharge.
28
Li-Ion battery is vulnerable, do not charge it with other power adapter, or it
may cause fire or explosion.
Getting Started
Installing the Battery Pack
This UMPC provides the most convenient way to install the battery pack into
your UMPC. With the extended nose directed toward the compartment, insert
and push the battery pack.
Removing the Battery Pack
To remove the battery pack, slide the lock latch to the end of left side to
unlock the battery lock latch (1), then slide the battery release latch to the end
of right side to release the battery latch (2), and take out the battery pack with
your finger (3) simultaneously.
29
UMPC
User Guide
Replacing the Battery Pack
When your UMPC estimates that the battery only has enough charge to
continue for a few minutes, it will alert you with a battery low warning beep. If
you are consuming a lot of power by using the audio system, and the hard disk
drives, your UMPC might run out of charge much sooner than you expect.
You should always respond to the battery low indication by connecting to AC
power or turning off your UMPC, or suspending your UMPC to disk. If you
do not do so, the UMPC will automatically suspend to disk and turn off. The
contents of the memory will store in the hard disk drive. You will be unable to
restart the UMPC until you have connected to the AC adapter or installed a
charged battery. To replace the battery pack, refer to the previous sections on
"Installing the Battery Pack" and "Removing the Battery Pack."
For Window XP, the suspend mode (Hibernate or Standby) can be chosen
at Power Options of Windows's Control Panel)
Be sure to save your data before replacing the battery pack or connecting
the AC adapter. Failure to do so can result in data loss.
EXTENDING BATTERY LIFE
It is important to be aware of the simple things for extending the life of the
system main battery while you are on the road. You should find a working
place where the external lighting is not too bright and turn down the screen
brightness. Also, you can choose the available mode on the Power
Management item of the Control Panel in Windows.
30
Getting Started
2.2
Connecting the AC Power Source
The AC adapter provides external power source to your UMPC and charges
the internal battery pack at the same time. The AC adapter also has an autoswitching design that can connect to any 100VAC ~ 240VAC power outlets.
To connect the power adapter:
1.
Plug the AC power cord into the power socket of the AC power adapter.
2.
Plug the other end of the AC power cord to a live AC wall outlet.
3.
Plug the connector of the AC adapter to the DC-IN port found at the
right side of the UMPC.
Whenever possible, it is advisable to always have the AC adapter connected
to the UMPC and the battery pack installed. This ensures continuous power
supply and prevents any data loss incurring from sudden power breakdown.
31
UMPC
2.3
User Guide
y For the power supply of this equipment, an approved power cord has to
be used.
y Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
y Before cleaning the UMPC, make sure it is disconnected from any
external power supplies (i.e. AC adapter).
Starting Your UMPC
The Power/Resume button is found on the right-top of the base unit. Press
the Power/Resume button to start your UMPC and check that if the Power
LED turns on.
After a few seconds, the UMPC’s display will turn on and your UMPC will
begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any error found during the test will be
displayed on the screen and may generate short beep sound as well.
After the test, the screen will also display a message "press  to enter
SETUP". You don’t need to run this program at the moment as your dealer
32
Getting Started
already made the necessary settings for your UMPC optimal operation. Refer
to Chapter 6 on running the SETUP program later.
After the test has completed, your UMPC will start to search and boot up the
operating system from your hard drive. The UMPC normally comes with a
Windows operating system pre-installed in your hard drive. Consult the
Windows manual on how to use the program. If not, contact your dealer for
assistance.
2.4
Adjusting the Display Controls
The LCD brightness adjustment is controlled by  + and  +
 keys respectively. You need to press these hot-key controls after
powering on your UMPC to suit your viewing pleasure.
The Brightness hot-key control adjusts the brightness on the LCD. The
brightness hot-key control will not set the LCD completely dark or bright; it
provides sufficient lighting to the LCD to match the external lighting of the
surrounding. The brighter the room, the more you need to increase the
brightness of the LCD.
2.5
Device Drivers Installation
If you already have an operating system installed into your UMPC, it is best to
install the needed device drivers for using the built-in devices of your UMPC.
Before installing the drivers, check with your dealer first if they have already
installed all the drivers along with the operating system. If not, follow the
procedures below:
33
UMPC
User Guide
INSTALLING WINDOWS XP FROM OPTICAL DISK DRIVE
To install Windows XP directly from your USB - Slim Combo Drive, please go
to Boot menu of BIOS setup menu. Use arrow key to select "CD-ROM
Drive", then use "+" or "-" to move it to the top. Go to Exit menu and select
"Exit Saving Changes". Accordingly, insert the Windows XP installation CD
into USB - Slim Combo Drive with following the instructions on the screen to
finish the installation.
Driver Installation Note:
Please be notified that whenever you install the driver utility, it should be
install the CHIPSET Driver first.
INSTALLING THE CHIPSET DRIVER
Your UMPC uses the advanced chipset. Installing the driver to enhance the
stability and performance.
Installing Chipset device driver for Windows XP
34
1.
Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as
"E:\Drivers\WinXP\Chipset\Setup.exe".
3.
Click "OK" to execute the setup program. The Setup box appears.
4.
Click "Next" continuously to install this driver when screen displays this
command.
5.
Tick the option “I Agree”. And press “Next” to continue the
installation.
6.
Click “Next” twice to continue the installation.
Getting Started
7.
Click “Next” to continue the installation.
8.
Tick the option "Yes, I want to restart my computer now.", and press
“Finish” to restart your system.
INSTALLING THE VGA DEVICE DRIVER
Following is the procedure for installing the Video Accelerator 3D Adapter
VGA driver to your UMPC:
Installing VGA device driver for Windows XP
1.
Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\VGA\Setup.exe".
3.
Click "OK" to execute the setup program. The Setup box appears.
4.
Press "Finish" to complete the installation.
INSTALLING THE AUDIO DEVICE DRIVER
Your UMPC uses the VIA Azalia VT1708A Audio controller.
Installing Audio device driver for Windows XP
1.
Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Audio\Setup.exe"
where the audio driver is located.
3.
Click "OK" to execute the setup program. The Setup box appears.
4.
Click "Next" three times to continue the following steps.
5.
Tick the option "Yes, I want to restart my computer now.",
35
UMPC
User Guide
and press "Finish" to restart your system.
INSTALLING THE HOTKEY UTILITY
Please follow the procedures below for installing the Hotkey utility:
Installing Hotkey utility for Windows XP
1.
Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Hotkey\Setup.exe "
3.
Click “OK” to execute the setup program. The Setup box appears.
4.
Click “Next” to continue the installation.
5.
Click “Install” to continue the installation.
6.
Click “Finish” to complete the installation.
INSTALLING THE WIRELESS LAN DEVICE DRIVER
Please follow the procedures below for installing the Wireless LAN driver:
Installing Wireless LAN driver for Windows XP
36
1.
Click the Start button and then click Run. The Run dialog box appears.
2.
Click Browse button and specify the directory as
"E:\Drivers\WinXP\Wireless LAN\setup.exe"
3.
Click "OK" to execute the setup program. The Setup box appears.
4.
Click “Next” to execute the setup program.
5.
Click “Finish” to complete the installation.
Getting Started
INSTALLING BLUETOOTH DEVICE DRIVER
Please follow the procedures below for installing the Bluetooth driver:
The Bluetooth device must be active before installing Bluetooth driver.
Installing Bluetooth driver for Windows XP
1. Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Bluetooth\Setup.exe".
3.
Click “OK” to execute the setup program. The Setup box appears.
4.
Click “OK” to choose setup language.
5.
Click “Next” to continue the following steps.
6.
Choose “I accept the terms in the license agreement” and click
“Next”.
7.
Click “Install” to implement setup program to install this driver.
8.
Choose “I accept” and click “OK”
9.
Click “Finish” and then press “Yes” to restart your system.
INSTALLING THE LAN DEVICE DRIVER
Please follow the procedures below for installing the LAN driver:
Installing LAN driver for Windows XP
1.
Click the Start button, then point to Run. The Run dialog box appears.
2.
Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\LAN\Setup.exe "
37
UMPC
User Guide
3.
Click "OK" to execute the setup program. The Setup box appears.
4.
Click “Next” to execute the setup program
5.
Click “Install” to implement setup program to install this driver.
6.
Click “Finish” to complete the installation.
INSTALLING THE TOUCH PANEL DEVICE UTILITY
Please follow the procedures below for installing the Touch Panel utility:
Installing Touch Panel utility for Windows XP
1. Click the Start button, then point to Run. The Run dialog box appears.
2. Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Touch Panel\Setup.exe "
3. Click "OK" to execute the setup program. The Setup box appears.
4. Click “Next” and “Install” to execute the setup program. The Welcome
box appears.
5. Tick the option “Yes, restart the computer now.”, and press “Finish”
to restart your system
INSTALLING THE CARE READER DEVICE DRIVER
Please follow the procedures below for installing the Card Reader driver:
Installing Card Reader driver for Windows XP
1. Click the Start button, then point to Run. The Run dialog box appears.
2. Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Cardreader\Setup.exe "
38
Getting Started
3. Click “OK” to execute the setup program. The Setup box appears.
4. Click “OK” to complete the installation.
2.6
Turning off Your UMPC
If you are not going to use the UMPC for a while, it is best to turn off the
power of the UMPC. Before turning off the power, you need to first close all
application programs and shut down the operating system.
After turning off the UMPC, make it a habit to leave the LCD panel open for a
while whenever used for an extended period of time. This allows the inside
parts of the UMPC to cool off. Closing the panel will force the heat up against
the LCD screen, which may degrade the LCD when done regularly. More
importantly, never close the LCD panel for a long period of time when UMPC
is on and power saving features are disabled.
39
UMPC
User Guide
This page is intended to be blank.
40
Using Your UMPC
Using Your UMPC
This chapter describes how to operate the standard
built-in features of the UMPC. If you are unfamiliar with
UMPC or the Microsoft® Windows® operating system, in
addition to this chapter, we recommend reading the
Windows® Help and Support page located on your
UMPC.
41
UMPC
3.1
User Guide
Starting Your Operating System
The operating system is the software foundation for your UMPC. It is the
platform for all your software application programs to run on. The most
popular operating system today is Microsoft® Windows®. The UMPC comes
with an operating system pre-installed and needs only to be setup and
configured during initial use.
3.2
Understanding the Keyboard
Functions
Your UMPC is equipped with an 80 keys keyboard that provides all the
functionality of a full-sized 101 or 102-key keyboard. Aside from the standard
typewriter-layout keyboard of your UMPC, there are a number of extra
features and function controls on the built-in keyboard including Windows
system hot keys.
42
Using Your UMPC
1. Function Keys
3. Windows Start Menu Key
5. Windows Shortcut Key
2. Control Keys
4. Control Keys
6. Cursor Control Keys
Keyboard
Key features and operations are described below:
•
Function Keys
Function keys are application-driven, like F1 through F12 can be found on
the keyboard. These keys work together with the Fn key to activate special
functions. Some keys (printed in blue on keypad) are preprogrammed with
dual functions.
•
Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction
with other keys to change their functions. To use control keys, press and
hold the control key while pressing another key. For example, "Press CtrlC" means to hold down the Ctrl key and type the letter C. Key
combinations work especially to the application you are running.
43
UMPC
•
User Guide
Windows keys
Use the following two keys to facilitate your work:
⇓
Start Menu key
Displays the Start menu.
⇓
Shortcut/Application key
Provides quick access to shortcut menus. This key acts like a right
mouse button.
•
Cursor Control keys
Cursor control keys let you position the cursor on the screen where you
want. In the screen, the cursor is a blinking underline, block, or vertical
bar depending on the application. The cursor indicates where the next text
typed is inserted.
•
Typewriter keys
Typewriter keys (also called alphanumeric keys) are used to enter text and
characters. Keys with blue print on them behave differently when
combined with control keys.
BASIC KEYBOARD FUNCTIONS
Keypad
Function Description
 key. Execute a command. Within many
text editing application programs, the  key
inserts a hard carriage return, just like what ordinary
typewriter does.
 key. Press this key to cancel or escape from
a command or function.
 key. Known as the Insert key. Press this key
to toggle the keyboard data entry from insert to type
over mode.
44
Using Your UMPC
Keypad
Function Description
 +  key. Known as the Print Screen
key. Press this key to map the whole screen to share
memory for your specific usage.
 key. Known as the Delete key. Press this key
to delete the character to the right of the cursor, or
delete marked texts or items.
 key. Press this key to temporarily halt
execution of a command. Pressing any other key to
resume execution of a command.
 key. Press this key to delete the
character to the left of the cursor.
 key. Press this key in combination with
alphabet letters to produce uppercase letters in
typing. Use this key in combination with those twocharacter keys (found on the second row of the
keyboard) to produce the upper marked keys. Also
used in most application program in combination
with other keys to execute a certain command.
 key. Press this key to move the cursor to the
next tab stop on the right. This key works much the
same as in ordinary typewriter.
 key. Known as the Control key. Used in
most application program in combination with other
keys to execute a certain command.
 key. Known as the Alternate key. Used in
most application program in combination with other
keys to execute a certain command.
 +  key. Activates the
embedded 15-key numeric keypad. The keys are
color coded blue.
45
UMPC
User Guide
Keypad
Function Description
 key. Used in most application
program to always activate uppercase alphabet
characters.
 +  key. Used in most
application program to scroll the screen without
having to move the cursor.
CURSOR CONTROL KEYS
Keypad
Function Description
Up arrow key. Moves the cursor up one line at a
time.
Down arrow key. Moves the cursor down one
line at a time.
Left arrow key. Moves the cursor to the left one
space at a time.
Right arrow key. Moves the cursor to the right
one space at a time.
SCREEN CONTROL KEYS
Keypad
46
Function Description
 +  key. Moves the
cursor to the beginning of a screen or
line.
Using Your UMPC
Keypad
Function Description
 +  key. Moves the
cursor up one screen at a time
 +  key. Moves the
cursor down one screen at a time
 +  key. Moves the cursor
to the end of a screen or line.
WINDOWS HOT KEYS
Keypad
Function Description
 key. Pulls up the Windows Start menu.
 key. Performs a mouse right-click
function for Windows system.
SPECIAL FUNCTION KEYS
The UMPC has special system function keys that activate key serving dual
functions. When pressed in conjunction with the  key, these keys set
specific system parameters and are sometimes referred to as "hot keys".
47
UMPC
User Guide
Keypad
48
Function Description
To enable the Wireless LAN/Bluetooth
function.
Switches display between LCD, CRT, or
LCD and CRT simultaneously.
Switches the screen between Vertical or
Horizontal display.
To shut down or resume the built-in
system speaker volume.
Decreases the brightness of LCD display
incrementally.
Increases the brightness of LCD display
incrementally.
Decreases the audio volume of the UMPC
incrementally.
Increases the audio volume of the UMPC
incrementally.
Using Your UMPC
3.3
Using the Touchpad Pointing Device
Your UMPC comes with a built-in Touchpad pointing device that is found on
the center of the palm-rest surface.
The Touchpad offers a number of options that let you customize how it
functions. To access these options, locate the Control Panel and double click
on the Mouse icon. The options let you control the size and color of the
cursor, cursor speed, the accepted double-click speed, and selection button
orientation.
The Touchpad works a mouse pointing device replacement that is used under
Windows-based operating system. You can use the standard Microsoft driver
that is compatible with the Touchpad device and is normally used under
Windows-based operating system. However, if you want to utilize the added
features of the Touchpad, you may want to try installing its own device driver
that comes with added utilities for enhancing the function of the device.
49
UMPC
User Guide
1. Left Selection Button
2. Right Selection Button
3. Touchpad
Touchpad Features
Here how to use the Touchpad pointing device:
3.4
1.
The rectangular surface acts like a miniature duplicate of your display
screen. To move the mouse cursor, place the finger lightly on the sensor
pad and move in the desired direction. If you reach the end of the pad, lift
your finger and place it back down on the other side of the pad.
2.
To select an item, click on the item by pressing the left button control or
by simply tapping on the surface once. A light, quick tap always works
best. To execute an item, click the left button twice or do a quick double
tap on the surface.
3.
To simulate holding the mouse button down (dragging an icon or
selection), use the tap-and-drag gesture. This feels much like a doubleclick, except that the finger remains on the pad after the second tap: Tap,
lift, tap, hold and move. The simulated button remains held as long as the
finger remains on the pad.
Avoid spilling any liquid on the Touchpad surface and always keep the
Touchpad surface and pointing finger dry from sweat built-up. Also do not
expose Touchpad to any magnetic source object.
Configuring Your Screen Display
The VGA display function of your UMPC is based on a high performance
AGP local bus controller and is fully VGA compatible. This controller offers a
large set of extended functions and higher resolutions especially useful when
50
Using Your UMPC
you are connecting an external high-resolution and high-frequency CRT or
LCD.
Please Refer to Section 5 "Installing the UMPC Device Drivers" of Chapter 2
in this manual for the procedures on how to install the VGA device driver
under Windows. After installing the VGA driver, you would then configure the
display resolution or screen size to match your LCD display panel. This UMPC
model provides Wide screen 7” 800x480 (Wide XGA) resolution panels. You
would also probably want to set the amount of color output to display sharper
images and photos.
POSSIBLE DISPLAY CONFIGURATIONS
The table below shows you the possible display resolution you can set when
using either the LCD display or the external monitor (CRT):
Display
Possible Resolution
Maximum Colors
Widescreen
7” WXGA LCD
CRT Only
800 x 480
16 million colors
640 x 480
800 x 600
1000 x 600
1024 x 768
1280 x1024
16 million colors
16 million colors
16 million colors
16 million colors
65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or
16M colors is equivalent to 32-bit true color.
You can use the  +  hot-key to switch the display between LCD
only, CRT only, or both LCD and CRT display.
51
UMPC
User Guide
CHANGING THE DISPLAY PROPERTIES UNDER WINDOWS
To change the display properties of your screen under Windows system, just
right-click on the desktop area and select Properties or go to the Control Panel
and click on the Display icon. The Display Properties dialog box will appear on
your screen. Click on the Settings tab to set your desired configuration. Make
sure to follow the configuration table above.
3.5
If you cannot configure the display properties, change the display driver
first as mentioned on Section 5 "Installing the UMPC Device Drivers" of
Chapter 2 in this manual. Consult your dealer for the latest Windows VGA
driver.
Knowing the Power Saving Features
Aside from its superior performance, one of the great features in your UMPC
is the ability to conserve power. Your UMPC is designed to incorporate
intelligent and advanced power management functions that turn off power of
most components when system is idle or not in use. This feature not only gives
you longer battery life but also cools the systems and components as well.
The definitions of Standby Mode, Hibernation Mode, and Shutdown are
depicted as follows:
Standby Mode
Standby Mode is mainly for power saving. When the Standby Mode is
activated, your display and hard drive are shut down and all open applications
and documents are stored in RAM (Random Access Memory). This allows
your UMPC to wake up quickly, but a low level of power is required to
maintain this suspended state. How quickly your system power down into
52
Using Your UMPC
Standby mode is up to you by setting proper times in Power Options of
Control Panel in Window. While the UMPC is in Standby mode, the LED of
power indicator flashes. To resume your working again, you can press the
power button to return your work to the screen where you left off.
Hibernation Mode
In Hibernation mode, all system devices are powered down and the contents
of RAM are stored on your hard drive. Hibernate mode uses less power than
Standby mode, but takes a bit longer time to resume. When your UMPC goes
into hibernation, Windows saves your entire desktop state before powering
down your UMPC. You don’t need to save and close each document before
you put your UMPC into hibernation. When you press power button again,
system will bring your UMPC out of hibernation. You'll find your applications
and documents open on your desktop exactly as you left them.
Shutdown
All power has been turned off from the UMPC. This means that no power
including external AC power source and battery power source will be consume
by the UMPC.
3.6
Working with the Built-in HDD
Your UMPC is equipped with a built-in large capacity 1.8 inch hard disk drive
where you store and run your UMPC’s operating system and application
software programs.
53
UMPC
3.7
User Guide
Using Flash Memory Cards
WHAT IS FLASH MEMORY CARD?
Flash Memory is a memory storage media. It is used by most digital camera,
moreover, it can replace the traditional floppy disk. Flash memory card is built
with different form factor and brand name. Their size is smaller than PCMCIA
card. This UMPC supports most of the flash memory card, including SD,
MMC, MS (Memory Stick), and MS_Pro card.
The 4 in 1 card slot is used by the following cards as SD, MS (Memory Stick),
MMC, and MS_Pro.
For a single moment, only one card can be inserted into the 4 in 1 card slot.
Inserting Flash Memory Card
To insert a flash memory card into the slot, please pay more attention
whenever insert the flash memory card into the slot with the correct side.
For MMC and SD card, you should position the copper connector at the
bottom side. For Memory Stick card, you should position the copper
connector at the topside. All of these cards should be located at the center of
the slots in inserting.
Slot
4 in 1
Card type
SD (Secure Digital)
MMC (MultiMedia Card)
MS (Memory Stick)
MS_Pro
Copper connector
Bottom side
Bottom side
Top side
Top side
Only one correct side can be accepted for the 4 in 1 card slot. If you cannot
insert the card into the 4 in 1 slot or you had inserted the card but it is not
recognized by the computer, please remove the card and turn the card upside
54
Using Your UMPC
down and insert it again. To prevent the damage made both on card and the
slot, never forced an entry into the slot with incorrect side.
Removing Flash Memory Card
To remove the flash memory card, you should first disable the card setting in
the system and pull out the card by finger, there is no release button for flash
memory slot.
55
UMPC
User Guide
This page is intended to be blank.
56
Fun with Multimedia
Fun with Multimedia
This chapter lets you make full use of all the
multimedia features of your UMPC in having fun
and excitement during work or leisure.
57
UMPC
4.1
User Guide
UMPC Multimedia Features
Your UMPC is rich in multimedia features that make your computing fun,
comfortable, exciting and easy. Your UMPC is well able to perform all
multimedia tasks through the following:
4.2
•
VIA C7 TM -M Processor
•
Up to 1GB DDRII- SDRAM
•
USB - Slim Combo Drive
•
Provides blazing graphics embedded in the VIA VX700 chipset
•
Full-duplex 16-bit stereo speaker with wavetable support. Sound Blaster
compatible.
Audio Sound System Features
Your UMPC has a built-in 16-bit stereo sound controller that allows you to
record, store, and playback voice, music and other sound effects with built-in
mixer controls. An integrated full-duplex microphone and twin mini-speakers
are also built-in into your UMPC to allow you to record and playback sound
anytime and anywhere.
On the right side of your UMPC, you will find the audio ports that include the
following:
58
•
External 1/8-inch microphone jack that connects external microphone for
recording purpose.
•
Earphone or headphone jack for personal listening.
•
Sound volume adjust by K/B hot-key
Fun with Multimedia
4.3
Setting up the Audio Driver
Properties
Before you can start using the audio capabilities of your UMPC, you need first
to setup properly the audio driver after installing Windows. If you bought your
UMPC with Windows pre-installed, it is most likely that your dealer have
configured the sound driver for you. If not, you must refer to Chapter 2 on
how to setup the sound drivers for Windows.
4.4
Windows Multimedia Programs
Windows provides several multimedia programs that you can run with the
built-in features of your UMPC. Pointing the Start button, Programs,
Accessories, then Entertainment, you will find the Multimedia programs
group. (The section below use Window XP as examples)
59
UMPC
User Guide
Figure 4-1 Entertainment Programs Group
The standard multimedia components are as follows:
•
Windows Media Player - for playing sound, video and animation files
•
Sound Recorder - for recording sounds and playback
•
Volume Control - for adjusting the volume of mixer
4.5
For more information on how to operate these multimedia components,
run the program and click on the Help menu.
Recording Sounds
Your UMPC allows you to record voice and other sounds in several ways and
stores them as files on your hard disk. These voice or sound files can then be
60
Fun with Multimedia
played back through the internal speaker or earphone jack using an external
speaker, headphone, or earphone set. You can also use the files as voice
annotations on many applications for more real presentation. This section will
describe briefly how you can record sounds under Windows operating system.
To record sounds, you need to run the Sound Recorder program from the
Multimedia program groups. The control buttons of the Sound Recorder are
simple to understand which comprise of the Fast Rewind, Fast Forward, Play,
Stop, and Record buttons. Click the Help menu on how to operate the Sound
Recorder.
Figure 4-2 Sound Recorder
The Sound Recorder also allows you to record sound from different input
audio source like the following:
•
From the external microphone
•
From the USB - Slim Combo Drive
Since you could record sound from different input sources, you must first set
the proper audio input recording device under the Recording Control panel.
To do this:
1.
Double-click on the Volume Control on the taskbar or click Start button,
then point to Programs, Accessories, Entertainment and then click on
Volume Control.
61
UMPC
User Guide
2.
Click Properties in the Options main menu.
3.
Click the round button for Recording and tick off each component that
list in the "Shows the following Volume Controls" box.
Figure 4-3 Audio Properties
4.
62
Click OK and the Recording Control dialog box will appear. Here, you
will select the input device for the recording source. If you want to record
from the USB - Slim Combo Drive with audio music, you must click on
CD Player.
Fun with Multimedia
Figure 4-4 Recording Volume Control
USING AN EXTERNAL MICROPHONE
Your UMPC allows you to connect an external microphone for high quality
recording. The external microphone jack is found on the right side of your
UMPC. Use only microphone with 1/8-inch mini-jack connector. Follow the
same procedure for recording voice.
USING THE BUILT-IN COMBO DRIVE
You would normally use the USB - Slim Combo Drive for recording audio
music from the Audio CD. Follow these steps:
1.
Activate CD Player volume on the Recording Control as discussed earlier.
2.
Run the Sound Recorder program.
3.
Insert the audio CD into the USB - Slim Combo Drive. Unless you have
disabled the CD auto-insertion notification for supporting Suspend mode,
the CD Player should automatically run after you have inserted an audio
compact disc and will start playing the audio CD.
63
UMPC
User Guide
Figure 4-5 Play Audio CD by Windows Media Player
4.6
4.
Select the starting point where you want to start recording.
5.
Switch to the Sound Recorder and press the Record button.
6.
Switch immediately to the Windows Media Player and press the Play
button. You can adjust the volume control so you can also hear the music
while in recording.
Playing Audio and Sound
Your UMPC has built-in twin speakers to playback audio and sound. You can
also adjust the volume manually by adjusting the volume control hotkeys
found on the keyboard.
64
Fun with Multimedia
For more quality sound output, you can choose to connect an external
amplified speaker or earphone from headphone jack. Always minimize the
volume first before placing the phone set to your ear.
USING THE WINDOWS MEDIA PLAYER
The easiest way to playback multimedia media files is to run the Windows
Media Player. Follow these steps:
4.7
1.
Click on Start, point to Programs, Accessories, and then
Entertainment.
2.
Click on Windows Media Player to start program.
3.
Click on the File menu and select the file you want to play.
4.
When the file is recognized and open, click on the Play button to start
playback.
Playing Video and MPEG Files
Your UMPC is capable of running video motion files as well as MPEG
(Motion Picture Expert Group) files on CD, DVD, or CD-RW. By using
software MPEG program, you can watch real full-motion picture on your
UMPC. You can also run the Windows Media Player under the Entertainment
programs group as well to show all media device programs.
65
UMPC
User Guide
Figure 4-6 Windows Media Player
66
Connecting to Peripherals
Connecting to Peripherals
This chapter describes how you attach additional
peripheral devices to your UMPC. The UMPC
allows you to add a printer or mouse; connect an
external monitor and keyboard, or other compatible
peripheral device. Use of additional devices is
described in this chapter.
67
UMPC
5.1
User Guide
Using the USB Port
USB (Universal Serial Bus) is a hardware interface that enables you to connect
multiple devices (such as printers, mice, keyboards, storage devices, joysticks,
digital cameras, and video conference cameras, etc.) to your UMPC, and up to
127 devices can be attached. Besides, USB’s hot swap capability allows
everything to be plugged in and unplugged without turning the system off.
Microsoft, HP, Compaq, Intel, Agere, NEC and Philip are seven core
members of USB-IF to have worked on USB 2.0 standardization. USB 2.0
offers data transfer rate up to 480Mbps (megabits per second) compared to
USB 1.1 devices, which transfer at speeds of 12Mbps. So, you could know that
USB 2.0 can transfer data between the UMPC and its peripherals 40 times
faster than USB 1.1. However, USB 2.0 is fully backward compatible, you will
be able to use a USB 1.1 device in a USB 2.0 compliant system.
68
Depending on your operational requirements, you may need to disable
other ports in order to release system resource for the USB port.
Connecting to Peripherals
5.2
The USB bus distributes 0.5 amps (500 milliamps) of power through each
port. For the purpose of power saving, please disconnect your USB device
while not in use.
Using an External DVI-I Port
Your UMPC has a DVI-I port for supporting any external CRT or LCD color
monitor. You need a display signal cable (usually provided with the monitor).
One end of the cable must have a 24-pin connector for the system. All you
have to do is plug the cable from the monitor into the left of the system with a
DVI-I Socket.
To connect an external monitor:
1.
Turn off your computer and make sure the monitor power switch is
turned off.
The UMPC must be powered off or suspended while the monitor is being
connected. Although you can connect the external Monitor without power
off the UMPC and the external monitor, however, it is harmful to both
devices and it shortens the life of these devices.
2.
Connect the connector cable of the monitor to the DVI port at the left of
your UMPC (If connector cable is VGA port, please make sure with using
the DVI-VGA Adapter). Secure the cable connection with the screws
provided.
Most monitors use a VGA cable to connect to a PC. In this case, you can
connect the VGA cable from the monitor to the DVI-I Socket on the left of
your UMPC via a DVI-VGA Adapter. Or you can connect directly to the
monitor with DVI socket.
69
UMPC
5.3
User Guide
3.
Connect the monitor power cable and plug it into a properly grounded
wall outlet.
4.
Turn on the power of the monitor.
5.
Turn on your UMPC. Both the LCD panel and the monitor screen will
show the display. Your computer is set at default to run at simultaneous
display mode.
6.
If you only want to show the display on the external monitor and shut off
the LCD display, you can use the  +  hot-key to switch
display type between LCD and external monitor. Keep pressing the hotkey until you get the display to external monitor only.
Refer to Chapter 3 regarding the possible External CRT resolutions and
how to change the display properties.
Using the External Audio System
At the right side of your UMPC, you will find the built-in audio ports. You can
connect Microphone jacks, earphone or powered speaker.
To connect to an audio jack:
70
Connecting to Peripherals
5.4
1.
Locate the audio port (Microphone, Headphone) that you want to use to
the target device.
2.
Plug the jack into the port on the right side of the system.
If you use external speaker and experience the sound distortion or
feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speaker from each other, moving away the
external audio option from the unit may also help.
Using the LAN Port
This UMPC comes with an internal 10Base-T/100Base-TX LAN module that
connects your UMPC to other UMPC/networks through a local area network
(LAN) and supports data transfer rates at 10Mbps and can be up to 100Mbps.
The 10Base-T standard also called Twisted Pair Ethernet is connected with RJ45 connectors. The 100Base-TX is based on the older Ethernet standard.
Because it is 10 times faster than Ethernet, it is often referred to as Fast
Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
To connect the twisted-pair cable to your LAN port:
1.
Locate the twisted-pair cable in the accessories box in UMPC shipping
carton. Each end of the cable has a RJ-45 connector.
2.
Connect one end of the cable into the network wall outlet or HUB.
3.
Connect the other end of the cable into the UMPC RJ-45 LAN port.
71
UMPC
5.5
User Guide
Using the Wireless LAN
Wireless LAN lets user connect to the LAN environment without using any
wire to traditional RJ-45 jack. User can enjoy the wireless connection within
the range of Access Point (AP) of LAN.
Access Point (AP) is the wireless transmission and receiving device, it generally
connects to the server of a LAN environment or act as a LAN hub with
wireless connection. Access point can be set in an office environment, airport,
major railway station, etc. that depends on the construction of each country. In
most case, you probably can use it at office, please consult with the network
department of your company for more details.
This UMPC integrates built-in 802.11 b/g wireless LAN module. IEEE
802.11b standard supports 11 Mbps wireless connection speed. However,
IEEE 802.11g supports 54Mbps wireless connection speed, and is backward
compatible with the slower 802.11b. Wireless LAN module is similar to LAN
module. You need to install software driver before using it. Please refer to
chapter 2.5 on how to install the driver.
72
Customizing Your Notebook
Customizing Your UMPC
Your UMPC uses the Phoenix BIOS Setup
program allowing your system configuration to be
altered to best suit your computing needs: Useradjustable options include system time and date, disk
drive configuration and password setup.
BIOS information stored in the CMOS RAM will
remain permanent unless changed. Default factory
settings are used top optimize performance of your
UMPC and do not need further alteration to operate
your UMPC. Use caution when changing any BIOS
settings.
73
UMPC
6.1
User Guide
Running the BIOS Setup Program
Your UMPC is setup and pre-configured. The UMPC’s BIOS (Basic InputOutput System) Setup program may be used to change system configuration
information such as the current date and time, or your hard disk drive type.
The Setup program can be accessed when you power on the system and
pressing the  function key before the Microsoft® Windows® operating
system begins.
The settings that you specify within the Setup program are recorded in a
special area memory called the CMOS RAM. This memory is backed up by a
battery so that is will not be erased when you turn off or reset the system.
Whenever you turn on the UMPC, the system will read the settings stored in
the CMOS RAM and compare them to the equipment check conducted during
the Power On Self Test (POST). If an error occurs, an error message will be
displayed on the screen, and you will then be prompted to run the Setup
Program.
As the POST (Power-On Self Test) executes during the boot up process, the
screen will display the following message:
Press  to Enter SETUP
Press the  key to run the BIOS Setup program. The BIOS Setup
program is organized into five menus which you can select using the <-- and -> keys. To move from one option to another, you use the up and down arrow
keys while using the  and , or <+>and <-> keys to change the
settings. On the right hand side of the screen are some brief help descriptions
of each item you want to change.
On the BIOS Setup program, you will find the following parts on the screen:
74
Customizing Your Notebook
•
Item Specific Help
The right side of the screen. This area describes each parameter and its
available settings.
•
Menu Bar
The top line of the screen. Each of the five selections displays its own
screen.
•
Parameters
The left side of the screen. This area lists the parameters and their current
settings.
•
Key Status Bar
The bottom part of the screen. These lines display the keys available to
move the cursor, select a particular function and so forth.
To exit the BIOS Setup program, simply press the  key and select from
the Exit menu whether you want to Save Changes, Discard Changes, and Exit
Discard Changes.
75
UMPC
6.2
User Guide
Using the Main Menu Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
System Time:
, ,
System Date:
[06/11/2007]
or  selects
Language
[English (US)]
field.
Secondary Master
[40008MB]
CPU Type:
VIA Esther processor 1200MHz
CPU Speed:
1200 MHz
System Memory:
640 KB
Extended Memory:
457728 KB
BIOS Version:
0.4A-2309-8A20
F1 Help
ÇÈ
Esc Exit
Å--> Select Menu
•
76
[07 :54 :32]
Select Item
-/+
Change Values
F9
Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
System Time
Allows you to change the system time using the hour:minute:second
format of the UMPC.
Enter the current time for reach field and use the ,
+, or  key to move from one field or back to
another.
You can also change the system time from your operating system.
Customizing Your Notebook
•
System Date
Allows you to set the system date using the month/date/year format.
Enter the current time for reach field and use the ,
+, or  key to move from one field or back to
another.
You can also change the system time from your operating system.
•
Language
Allows you to set the display language version for the BIOS Setup
program.
•
Secondary Master
This field is for information only as the BIOS automatically detects the
storage media.
•
CPU Type
This field reports the CPU type information detected by the BIOS during
Power-On Self-Test (POST).
•
CPU Speed
This field reports the CPU speed information detected by the BIOS
during Power-On Self-Test (POST).
•
System Memory
This field reports the amount of base (or conventional) memory found by
the BIOS during Power-On Self-Test (POST).
•
Extended Memory
This field reports the amount of extended memory found by the BIOS
during Power-On Self-Test (POST).
•
BIOS Version
This field is for information only as the BIOS displays the BIOS version
during the Power-On Self-Test (POST).
77
UMPC
User Guide
6.2.1 INTERNAL HDD SUB-MENU
Phoenix BIOS Setup Utility
Main
IDE Channel 1 Master [FUJITSU MHV2080BH PL-(S1)]
Type:
[Auto]
This setting enables or
LBA Format
disables 32 bit IDE data
Total Sector:
78126048
Maximum Capacity:
40008 MB
Multi-Sector Transfers:
[16 Sectors]
LBA Mode Control:
[Enabled]
32 Bit I/O:
[Disabled]
Transfer Mode:
[FPIO 4 / DMA 2]
Ultra DMA Mode:
[Mode 2]
SMART Monitoring:
Enabled
F1 Help
ÇÈ
Esc Exit
Å--> Select Menu
Select Item
-/+
Item Specific Help
Change Values
transfers.
F9
Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
Use the Type field to select the drive type installed. You can select different
drive types as CD-ROM, User, Auto or None by pressing  bar. Set
this option to Auto so your UMPC will automatically detect the drive type
during power on. Set this option to None when your UMPC is not installed
any devices. Press  to return to the Main Menu.
78
Customizing Your Notebook
.6.3 Using the Advanced CMOS Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
PS/2 Mouse
[Enabled]
Display system
Display Device Selection 1:
[CRT]
Configuration on boot
Legacy USB Support
[Enabled]
F1 Help
ÇÈ
Esc Exit
Å--> Select Menu
Select Item
-/+
Change Values
F9 Setup Defaults
Enter
Select Sub-Menu F10 Save and Exit
•
PS/2 Mouse
Lets you activate or inactivate the mouse function. [Disabled] prevents any
installed PS/2 mouse from functioning. [Enabled] forces the PS/2 mouse
port to be enabled regardless if a mouse is present or not.
•
Display Device Selection 1
Lets you specify the external display device to CRT or DVI.
•
Legacy USB Support
Enable or disable the USB Bus support when in connection with USB
device.
79
UMPC
6.4
User Guide
Security Menu Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Supervisor Password Is:
Clear
User Password Is:
Clear
Supervisor Password
controls access to the
80
Set Supervisor Password
[Enter]
Set User Password
[Enter]
Password on boot
[Disabled]
Fixed disk boot sector:
[Normal]
F1 Help
ÇÈ
Esc Exit
Å--> Select Menu Enter
Select Item
-/+
Change Values
setup utility.
F9
Setup Defaults
Select Sub-Menu F10 Save and Exit
•
Supervisor Password Is
Set/Clear selections show that the UMPC is under controlled by
Supervisor Password or not.
•
User Password Is
Set/Clear selections show that the UMPC is under controlled by User
Password or not.
Customizing Your Notebook
•
Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming
from suspend mode. When you press  in this field, the Set
Supervisor Password dialog box appears. Enter a new password with up
to 8 alpha-numeric characters, and then re-enter it for confirmation.
•
Set User Password
This field is only available when Supervisor Password has set. Enter the
user password when boot the system or resume from suspend mode. But
if the Write Protect is set in the Fixed disk boot sector field, you should
enter a supervisor password to access the fixed disk when boot the system
or resume from suspend mode.
•
Password on Boot
If you set this field to Enabled, your UMPC will always ask for the
password every time you boot your UMPC.
•
Fixed disk boot sector
Lets you choose “Write Protect” to write protects boot sector on hard
disk to protect against viruses, or choose “Normal” to disable this
function.
81
UMPC
6.5
User Guide
Using the Boot Setup
This item allows you to set the search drive sequence where the system will try
to boot up first.
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Boot priority order
IDE 2: Hitachi HTC368040H5CE00-(S
Keys used to view or
PCI Bev: Realtek Boot Agent
configure devices:
Up or Down arrows
Select a device.
<+> and <-> moves
the device up or down.
F1 Help
Ç È Select Item
Esc Exit
Å--> Select Menu Enter Select Sub-Menu
-/+
Change Values
F9
Setup Defaults
F10 Save and Exit
This page allows you to set the search drive sequence where the system will try
to boot up first.
To select the boot device, you can use the up or down arrow key, then press
<+> to move up the device in the list or press <-> to move down the device
in the list. To exit from this menu, press .
82
Customizing Your Notebook
6.6
How to Exit the Setup Program
There are two choices to escape from the Setup program.
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit System Setup
Exit Discarding Changes
and save your
Load Setup Defaults
changes to CMOS.
Discard Changes
Save Changes
F1 Help
Ç È Select Item
F5/F6 Change Values
F9
Setup Defaults
Esc Exit
Å--> Select Menu
Enter Execute Command
F10
Save and Exit
•
Exit Saving Changes
Saves all changes to CMOS while running the BIOS setup program and
exit from the system setup program.
•
Exit Discarding Changes
Allows you to discard all changes made while running the BIOS setup
program and exit from the system setup program.
•
Load Setup Defaults
Lets you load the default values for all setup items.
•
Discard Changes
Reverts to previously selected settings.
83
UMPC
•
6.7
User Guide
Save Changes
Saves Setup data to CMOS.
How to Upgrade the BIOS
Your UMPC uses EPROM Flash BIOS chip that allows you to easily upgrade
the BIOS program. When you update the BIOS, any customized settings you
made are lost.
To upgrade the BIOS:
1.
Put in the BIOS Update data into the USB device.
2.
Power on the system with the diskette in the diskette drive.
3.
On the DOS prompt, type the following command.
A:\>Phlash XXXXXX.ROM (BIOS filename) or
A:\>XXXXXX.BAT (Batch file for BIOS file)
Press  to run this BIOS utility. After the system has been
successfully run this program, a message similar to the following appears:
Flash memory has been successfully programmed,
press any key to restart the system. If the
system does not restart, turn it off, then turn
on again.
4.
Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
84
Using Options
Using Options
This chapter describes the advanced features and
expandable architecture in your UMPC.
85
UMPC
User Guide
System Upgrade
This section provides some steps in doing system upgrade for your UMPC.
The upgrade procedures include the following:
7.1
Memory Upgrade
Your UMPC offers 200-pin SODIMM (Small Outline Dual Inline Memory
Module) with 256MB, 512MB, or 1024MB DDRII-SDRAM. The memory
compartment is located inside your UMPC.
7.2
Wireless Module Installation
This UMPC uses USB Dongle wireless LAN module for wireless connection.
86
Caring for Your Notebook
Caring for Your UMPC
Your UMPC the latest features in mobile computing
and multimedia technology. If properly cared for and
maintained, the performance and reliability of the
UMPC can be greatly prolonged.
87
UMPC
8.1
User Guide
Important Safety Instructions
This section gives you detailed information about how to maintain a safe
working environment while using the UMPC. You can maintain its condition
and performance by following these guidelines. Please read it carefully to
ensure maximum safety.
88
•
Before cleaning the UMPC, make sure it is disconnected from any
external power supplies (i.e. AC adapter, car adapter and so on).
•
When cleaning, do not use liquid or sprayed detergent for cleaning.
Instead, use moisture sheet or a cloth for cleaning.
•
The socket-outlet shall be installed near the UMPC and shall be easily
accessible.
•
Please keep the UMPC from humidity.
•
Lay the UMPC on a reliable surface when installing. A drop or fall may
cause injury.
•
The openings on the enclosure are for air convection hence the UMPC
can be protected from overheating. DO NOT COVER THE
OPENINGS.
•
Be careful of using power supply. The UMPC has specific power
requirements.
•
Use only a power adapter approved for use with this UMPC.
•
The power adapter may have a 2-prong plug. This is an important safety
feature. A compatible outlet is required. If it is not available, find a
qualified electrician to install one.
Caring for Your Notebook
•
While unplugging the power cord, disconnect it by the plug head, not by
its wire.
•
Make sure the socket and any extension cords you may use can support
the total current load of all the connected devices.
•
Though your AC adapter is suitable for universal international voltage, it
still requires a stable and continual power supply. Make sure the voltage of
the power source when connect the UMPC to the power outlet. If your
are unsure of your local power specifications, consult your dealer or local
power company.
•
Place the power cord in such a way that people can not step on it. Do not
place anything over the power cord.
•
All cautions and warnings on the UMPC should be noted.
•
If the UMPC is not in use for a long time, disconnect it from mains to
avoid possible damage by transient over-voltage.
•
Never pour any liquid into openings as this may cause fire or electrical
shock.
•
Never open the body of UMPC. For safety reason, the UMPC should only
be opened by qualified service personnel.
•
If one of the following situations arises, have the UMPC checked by
service personnel:
⇓
The power cord or plug is damaged.
⇓
Liquid has penetrated into the UMPC.
⇓
The UMPC has been exposed to moisture.
⇓
The UMPC has not worked well or you can not get it work according
to user’s manual.
89
UMPC
User Guide
⇓
The UMPC has dropped and damaged.
⇓
The UMPC has obvious sign of breakage.
•
Do not leave this UMPC in an environment unconditioned. Storage
temperature above 60ºC (140ºF) may damage the UMPC.
•
An approved power cord has to be used for the UMPC power supply.
For a rated current up to 6A and an equipment weight more than 3 kg, a
power cord not lighter than H05VV-F, 2G, 0.75mm2, has to be used.
•
To avoid any damage happened to the internal device, you should first
disconnect the AC adapter and remove the battery pack from the UMPC
when replacing any internal device.
The sound pressure level at the operator's position according to IEC 60704-1
is equal or less than 70dB(A).
8.2
Cleaning Your UMPC
When it is necessary to clean the plastic case and keyboard, use a soft, lint-free
cloth, slightly dampened with a mild detergent solution or use the contents of
any commercially available UMPC cleaning kit.
Never use alcohol, petroleum-based solvents, or harsh detergents to clean the
UMPC. Also never spray any liquids directly on the UMPC case, keyboard, or
screen. If the liquid-crystal display (LCD) screen has become smeared or dusty,
clean the screen by first applying a mild glass cleaner to a soft, clean, lint-free
cloth, and gently wipe the glass. Never apply liquids directly on the screen
surface. Moreover, do not use paper towels to clean the display screen. Paper
can scratch the display screen matte.
90
Caring for Your Notebook
8.3
Maintaining the LCD Quality
When it comes to screen problems, heat plays a significant role. After a typical
working session, users routinely close the UMPC the cover. The display
surface - no matter what type it is - and the components inside the UMPC
radiate heat; when you close the cover, you trap the heat against the screen. To
help prolong the life of your UMPC, leave the cover open for ten minutes
while the heat disperses.
You should also enable the power management of your UMPC to turn off the
LCD power and display when the system is inactive for some time. Adding a
screen saver also helps prolong the life of your UMPC screen.
Follow the safety guidelines mentioned earlier and how to clean your UMPC.
8.4
Maintaining Your Hard Disk
Losing your data has the same consequences as a system break down. Users
must make it a habit of doing hard disk maintenance every week or so. Here is
some maintenance you could do:
•
Always back up your data files from your hard disk.
•
Install the virus detecting program to monitor virus that could tamper
your files.
•
Use SCANDISK occasionally to correct any errors found in the directory
and File Allocation Table. This will also free up space from any unused
sectors.
•
Never move or raise the UMPC while the hard disk is being accessed,
most especially don't jar the hard disk as this may cause a hard disk crash.
91
UMPC
8.5
User Guide
•
Use hard disk maintenance programs like Disk Defragmenter of
Windows. These reorganize your hard disk by eliminating fragmentation
and improving your hard disk access time.
•
Install a system password in your UMPC so others won't be able to use
the hard disk.
Battery Care Guidelines
The battery pack furnished with the UMPC requires reasonable care and
handling to ensure efficient operation and maximum life. There is a risk of fire
and chemical burn if the battery pack is handled improperly.
To ensure that the battery pack endures normal life cycle, always observe the
following precautions when handling the battery pack:
92
•
Handle batteries carefully. Do not try to disassemble, crush, puncture,
open, drop, mutilate, short external contacts, disposed of in water or fire,
or expose it to temperatures higher than 60 C.
•
Recharge batteries only as described in this manual and only in ventilated
areas. Never use an external charger other than the one supplied with your
UMPC.
•
Do not leave batteries in hot locations for more than a day or two.
•
Do not leave your battery in your UMPC for longer than 1 month without
plugging in the power adapter.
•
Do not leave battery in storage for more than 2 months without
recharging it to prevent over discharge. Over discharge will hurt the
battery
•
Dispose dead battery properly to protect the environment. The batteries
contain hazardous chemicals and should not be thrown out with
household or office trash.
Caring for Your Notebook
•
8.6
You should always discharge your battery before recharging it on either of
these two conditions: first, this is the first time you start to use your
battery; second, you had not charge the battery for more than 2 months.
To discharge the battery, please execute the "Battery Refresh" function in
the BIOS Setup Utility.
When You Travel
For safety and convenience when traveling, please follow these instructions:
•
Back up all needed files on your hard disk before traveling.
•
Recharge your battery overnight to ensure full battery power before you
leave.
•
Don't forget to bring along the AC adapter and extra battery pack.
•
Try to bring backup software as well.
•
Check the voltage rating and the outlet type of your destination. If the
power cord of the adapter is different, then you need to purchase a
suitable one. Consult your dealer.
•
Carry your UMPC in its carrying case or in a briefcase. Never check-in the
UMPC as a luggage.
•
Remember to apply those power saving features and techniques to save
battery power.
93
UMPC
User Guide
This page is intended to be blank.
94
System Specification
APPENDIX A
System Specification
This appendix provides technical specifications for
the UMPC..
95
UMPC
User Guide
System Specification
PROCESSOR UNIT
•
VIA C7 TM -M Processor
•
Above 1.2 GHz CPU
•
128KB integrated L2 cache for the processor
SYSTEM MEMORY
•
Two 200-pin memory slots
•
256MB, 512MB, 1024MB, memory modules using 200-pin SODIMM
•
DDRII – 533/667 SDRAM modules
LCD DISPLAY
•
7" WXGA (16:10) Color TFT LCD, 800 x 480
•
Maximum 16M true colors on all LCD display
VGA SYSTEM
96
•
Integrated VIA VX700 graphic engine
•
Simultaneous LCD and external monitor (CRT) display
•
Maximum 16 million colors on LCD display at 800 x 400 resolution for 7"
LCD
•
Maximum 16 million colors on external monitor or projector at
1280x1024 resolution (Non-Interlaced)
System Specification
STORAGE
1.8” Format 8 mm High PATA HDD Module; Bus Mastering, Ultra DMA
ATA-66 Support for LBA Scheme
AUDIO SYSTEM
•
Full-duplex 16-bit stereo speaker with wavetable support
•
H/W Audio Sound Blaster 16 compatible
•
Built-in dual speakers
•
Audio input jacks for microphone (MIC)
•
Audio output jack for external speaker or headphone (Line-Out)
•
Sound volume adjust by K/B Hot-Keys
TOUCHPAD
Integrated Touchpad (Serial/USB mouse) pointing device with 2 click buttons
KEYBOARD
•
Full-sized 80-keys keyboard with Windows systems hot-keys, inverted Tcursor keys, 8 hot keys, 12 function keys, and embedded numeric keypad
•
Provides international language keyboard
FLASH BIOS
512K Flash ROM BIOS for easy BIOS upgrade
I/O PORTS
•
1 x DVI port
97
UMPC
User Guide
•
2 x Universal Serial Bus (USB 2.0)
•
1 x LAN port
WIRELESS DEVICES
IEEE 802.11b/g, USB Dongle Module
AC/DC POWER SUPPLY ADAPTER
Universal auto-switching (100V~240V) 65W adapter, 20 Volt
BATTERY
•
Rechargeable 4 Cells Li-ion battery pack with Smart Battery function
•
Approximately 4.5 Hours (for Battery Mark) Battery Life
WEIGHT AND DIMENSION
98
•
230 (W) x 171 (D) x 29.4 (H) mm
•
Approximately 0.97 Kg

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 98
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:33c097a8-2893-43a2-adfd-f2c86fed4178
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2007:07:31 15:13:32+08:00
Create Date                     : 2007:07:31 15:13:32+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:aaaf79f8-cffd-4969-93a9-457eb3892126
Format                          : application/pdf
Title                           : Microsoft Word - User manual for CE260-CE261.doc
Creator                         : elise.tang
Author                          : elise.tang

EXIF Metadata provided by EXIF.tools