Fisher And Paykel 517735 Users Manual A Smartdrive Serv_Man Ph1 5 230v
517735 to the manual 175feee0-0d2b-46a7-a48c-b44cb1c30768
2015-02-02
: Fisher-And-Paykel Fisher-And-Paykel-517735-Users-Manual-406366 fisher-and-paykel-517735-users-manual-406366 fisher-and-paykel pdf
Open the PDF directly: View PDF
Page Count: 92
- SMART DRIVE ELECTRONIC WASHING MACHINE PHASE 1 to 5 – 230v
- TABLE OF CONTENTS
- 1.0 INTRODUCTION
- 2.0 SPECIFICATIONS
- 3.0 INSTALLATION
- 5.0 SMARTDRIVE INFORMATION
- 6.0 SMARTDRIVE PROBLEMS
- 7.0 OPTION ADJUSTMENT MODE
- 9.0 SIZE SETTING MODE – Phase 4 and 5 only
- 10.0 USER WARNINGS
- 10.1 Insufficient Hot Water (Hot Water LED flashing)
- 10.2 Insufficient Cold Water (Cold Water LED flashing)
- 10.3 No Water (Both Hot and Cold Water LEDs flashing)
- 10.4 Overloaded Product (High Water LED flashing)
- 10.5 Out of Balance (First Rinse or Final Spin and Current Spin Speed LED is flashing)
- 10.6 Suds (First Rinse LED is flashing or Final Spin LED is flashing)
- 10.7 Restart and Recycle (Wash Progress LEDs flashing)
- 10.8 Demonstration Mode (All LEDs flashing in patterns)
- 11.0 FAULT CODES
- 12.0 MECHANICAL SERVICE SECTION
- Appendix A: Binary Decoding Chart – 8 Bits (0-255)
- Appendix B: Technical Bulletins
- WM011 ALTERNATIVE SPARE PARTS FOR PHASE 1 MOTOR CONTROLLER – June 1999 – Phase 1 only
- WM013 PUMP HOOD KIT – January 2000 – Phases 2 to 5
- WM51 DIAGNOSTIC FLOW CHART – Sept 1992– Phase 1 only
- WM65 BIB DEFLECTOR – April 1994– Phase 1 only
- WM70 PREMATURE OUT OF BALANCE – February 1995 – Phase 2 only
- WM80 CONDENSATION KIT – May 1996 – Phase 2 & 3 only
- WM81 PUMP SHIELD 5KG SMARTDRIVE – September 1996 - Phases 1 to 4
- Appendix C: Smarttool
- Appendix D: Tools for Servicing Smartdrive
- Appendix E: IW SMARTDRIVE SERVICING