Fisher Price Ocean Wonderstm Aquarium Cradle Swing 79667 Users Manual

Fisher-Price-79667-Instruction-Sheet-754833 fisher-price-79667-instruction-sheet-754833

79667 to the manual 616586ce-9785-409c-a0c5-f6339be4e952

2015-01-24

: Fisher-Price Fisher-Price-Ocean-Wonderstm-Aquarium-Cradle-Swing-79667-Users-Manual-339690 fisher-price-ocean-wonderstm-aquarium-cradle-swing-79667-users-manual-339690 fisher-price pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadFisher-Price Fisher-Price-Ocean-Wonderstm-Aquarium-Cradle-Swing-79667-Users-Manual- Fisher-price-ocean-wonderstm-aquarium-cradle-swing-79667-users-manual
Open PDF In BrowserView PDF
79667, B0639
Instructions

Assembly Note: The toys on the mobile shown on this instruction sheet may be different from those on your product.
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.

Press Button
Motorized
Frame Tube
Buttons

3

• Lay the swing on it’s side.
• Press the buttons in the motorized frame tubes.
• Remove the motorized frame. Throw away the
motorized frame.

1
• Loosen and remove the screw and lock nut from the
motorized frame tube. Throw away the screw and lock nut.
• Press the button on the motorized frame tube and remove
the seat.

Button

New Motorized Frame

Button
Tube
Button

4

2
• Press the buttons on the back of the motorized frame while
pushing the legs inward.

Red Dot
Hole

• While pressing the upper button on the right leg, fit it into
the tube in the new motorized frame. Make sure the upper
button on the right leg “snaps” into the hole in the tube.
• Repeat this procedure to assemble the left leg to the new
motorized frame.
• When the legs are assembled correctly to the tubes in the
motorized frame, you should not see the red dots.

Assembly

Button

Button

Feet

5

Feet

R

L

7
• Stand the assembly upright.
• Pull the legs out so that the buttons “snap” into the holes in
the motorized frame.
• When standing behind the product, all four feet should be
flat upon the floor. And, check for an L marking on the left
foot and an R marking on the right foot.
• If the feet are not flat upon the floor, or the left and right feet
have been reversed, remove both lower legs from the upper
legs. Replace them onto the opposite upper leg.

M5 x 30mm Screw
Rounded
Side
M5 Lock Nut

• Insert the new screw
BOTH SHOWN ACTUAL SIZE
into the smaller hole in
the motorized frame tube.
Hint: You may need to tap the screw with a hammer or twist the
screw to completely insert it through the hole.
• Attach the lock nut, rounded side facing out, to the screw.
• Tighten the screw with a Phillips screwdriver.

Motorized
Frame Tube
Hole

Press Button

6
• Press the button on the seat tube and slide the seat tube
into the motorized frame tube. Make sure the button on
the seat tube “snaps” into the larger hole in the motorized
frame tube.
PRINTED IN CHINA

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
79667a-0922
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2004:02:16 13:21:51-05:00
Modify Date                     : 2004:02:16 13:21:51-05:00
Page Count                      : 2
Creation Date                   : 2004:02:16 18:21:51Z
Mod Date                        : 2004:02:16 18:21:51Z
Producer                        : Acrobat Distiller 5.0 for Macintosh
Metadata Date                   : 2004:02:16 18:21:51Z
EXIF Metadata provided by EXIF.tools

Navigation menu