FitLinxx WM Wireless Bodylan Enabler RF Module User Manual Exhibit D Users Manual per 2 1033 b3

FitLinxx Wireless Bodylan Enabler RF Module Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

PROPRIETARY RF Module User Guide Doc Number: 930-00004-01 Proprietary Information Revision History DATE REVISION DESCRIPTION AUTHOR 8/04/2007 01 Initial release Steven Oliver 8/13/2007 02 FCC modifications John MacLean Approvals The information contained in this document is the sole property of FitSense Technology. Any reproduction in part or whole without the written permission of FitSense Technology is prohibited. FitSense Technology
RF MODULE DOC #: 930-00004-01 REVISION: 02 © 2006 FITSENSE TECHNOLOGY CONFIDENTIAL PAGE 2 OF 3 1 User Guide 1.1 Introduction: The RF Module (RFM) enables any PC based product with a USB port to provide wireless communication between FitSense Sensors. 1. Installation: Installaton and Serviceing is only to be performed by a qualified technician trained by FitLinxx in the installation of this module. 1. Locate the USB port on the Equipment. 2. Install the RF Module USB cable in to the USB port. 3. If USB connection is made internally to the PC the cables must be stripped back and soldered onto the appropriate USB signal pins. This can only be performed by a FitSense qualified technician!
RF MODULE DOC #: 930-00004-01 REVISION: 02 © 2006 FITSENSE TECHNOLOGY CONFIDENTIAL PAGE 3 OF 3 1.3 Operation: The RF Module will transmit RF packets to FitSense Test Equipment called the Wirless Sensing Module. When you run the program WSM.exe on the Personal Computer the RF Module is connected to, all the LEDs on the WSM will light up showing the RF module is transitting and receiving. 1.4 Regulatory: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operations. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the device.

Navigation menu