Fitcare Electronics PE805A Activity Tracker User Manual 2015 11 24 MOVE

Download:
Mirror Download [FCC.gov]
Document ID	3476461
Application ID	T5/AVJhlcrbmw+WkwJB8ZQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	119.61kB (1495187 bits)
Date Submitted	2017-07-21 00:00:00
Date Available	2017-07-21 00:00:00
Creation Date	2017-02-07 15:05:45
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-07-19 10:54:12
Document Title	2015-11-24-MOVE说明书
Document Creator	Adobe Illustrator CC 2017 (Windows)
Document Author:	hello

User Manual
PE805A 中性说明书
材料：
105克铜版纸双面单色
切线：
折线：
正面
80mm
Quick Start
1 Using for the first time
2 Download the App
1 Open the package;
Find “Moofit” from the App store or scan the following QR code to install
the App.
2 Take the main device out from the silicone clip;
3 After succeed, you may sync the data by pulling down the page.
2.1 Connect to the App
The word "synchronizing" will be showed on the upper left corner.
During synchronizing please wait till the word "synchronizing"
disappear.
First Time Connection
1 Turn on the Bluetooth: Setup - Bluetooth - Turn on the Bluetooth
Steps
Do not try to find or pair with the device on this page.
Version：V1.0
....
synchronizing
Setup
85mm
the silicone clip
the main device
Bluetooth
MooFit
3 Pull out the insulation sheet from the back of the main device；
on
4 Device management: Enter personal center by touching the icon
2 Open the App, register and log in. Place the device near the phone,
4 The light of the main device starts to flash, which means the main
(recommended within 1m). Enter device center-add new device
-search device. Select “MOVE”, to start paring.
device starts to work;
5 Replace the main device back into the silicone clip.
“ Me ” . In the sub-menu of device management, you may check the
current paired device, or delete paired device by sliding to the left
and select “delete” , for Androids, hold the device name to delete.
Device Management
Pull out the insulation sheet
The light flashes
My Device
MOVE
Pair
-88 MOVE
3 How to check the progress
4 How to wear the device
Double tap the device:
5 How to replace the battery
6 Trouble Shooting
1 Twist the battery door counter clockwise by a coin;
1 How to turn on the device’ s Bluetooth?
2 Replace the battery;
If the white LED is on, the device haven’ t been activated, need to
activated the device in the App(check part 2.1 to connect to the
App).
Succeed
Delete
Pair
You need to activated the device for the first time using and after the
battery replacement.
7 Component list
The product is no button design, once powered up, the Bluetooth will
be on, without any trigger.
3 Twist the battery door clockwise to install the battery door;
4 The light of the main device will flash(last about two seconds) after
the battery door has been tightened. And the device can be paired
on the App, the data can be synchronized. Then the battery has
been successfully replaced. If not, please check up whether the
battery replacement process is correct.
2 The device can’ t be found during pairing?
Main device
a. Make sure the Bluetooth on the phone has been turned on.
Silicon clip
b. The battery may has been run off, please replace the battery.
3 Successfully paired, the data can’ t be uploaded?
Quick Start
a. Please make sure the device is within the wireless reception range
of the mobile phone, recommended within 1m.
b. Check the connection status of the device in the upper left corner
of the App, if “Device disconnected” is displayed, please check if
battery replacement is necessary.
Wrist band
(optional)
User manual
4 Double click on the device but no flashing light?
背面
1 第一次使用
使用手册
b. Check if battery replacement is necessary.
To avoid danger, batteries should be kept away
from the children's area.
a. The strength level of the click may affect the trigger of the light,
please try with different strength.
2 下载App
1 打开包装；
3 将电池绝缘片从主机背面拉出；
主机
2 打 开 A p p , 注 册 填 写 资 料 , 完 成 后 ， 进 入绑定设备页面，将本
品 靠 近 手 机 放 置，( 建 议 在 1m 以 内）；在 搜 索 例 表 中 点 击
" MOV E" 进行配对。
绑定设备
4 如何佩戴本品
目标完成=50%
目标完成=25%
50%<目标完成<75%
删除
第一次使用本品或每次更换电池之后都需要按上述步骤重新激活本设备。
本产品为无按键设计，产品通电后，蓝牙一直处在开启的状态，无需
3 顺时针拧紧电池后盖;
4 拧紧电池后盖后主机的灯会闪烁（大约两秒钟），并 且 在 App上能够
正常配对及同步数据，则电池更换成功，否则请检查更换电池过程是
否正确。
任何触发。
2 配对过程找不到设备?
a 确认手机的蓝牙处于打开状态。
主机
硅胶夹
b 本品的电池电量可能已经耗完，请更换电池。
3 配对成功，但是数据不能上传?
目标完成=75%
使用 手册
a 请确保本品在手机的无线可接收范围之内，建议在1m以内。
b 在App的左上角查看设备的连接状态，如果显示“设备未连接”，请
查看本设备是否需要更换电池。
75%<目标完成<100%
MOVE
7 元件清单
1 如何启动设备蓝牙?
2 更换电池;
25%<目标完成<50%
6 常见问题
1 使用硬币逆时针拧开电池后盖;
如果白色灯亮，设备还没有被激活，需要被激活后再使用（参考:2.1连接app）
目标完成<25%
5 如何更换电池
设备管理
我的设备
绑定设备
-88 MOVE
....
到 " 设备管理 "，可查看当前已连接的设备，左划已连接的设备可
删除当前设备(安卓手机长按删除）
，
点击 " 添加设备 " 搜索添加新设备。
灯闪烁
步行
正在同步数据...
4 设备管理： 在 App 底部，点 " 我的 "，进入个人中心，在例表中找
MooFit
拉出绝缘片
敲击两次主机：
显示数据
正在同步数据
1 打开手机蓝牙：设置--蓝牙--打开蓝牙。
4 主机的灯开始闪烁，主机开始工作；
5 把主机装回硅胶夹内。
3 如何查看显示
。
不要尝试在本页面寻找设备或配对。
硅胶夹
3 进 入 A p p 会 自 动 同 步 数 据，也 可 以 手 动 下 拉 屏 幕 刷 新 同步 数 据
第一次连接App
版本：V1.0
2.1 连接App
从App商店搜索"MooFit"下载,或者扫描以下二维码安装App。
2 将主机从硅胶夹内取出；
Strap
(optional)
4 双击本设备没有灯闪烁指示?
目标完成
腕带
(可选)
说明书
a 敲击的力度可能会影响到灯的触发，请用不同的力度尝试。
b 检查是否需要更换电池。
挂绳
(可选)
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : hello
Title                           : 2015-11-24-MOVE说明书
Create Date                     : 2017:02:07 15:05:45+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Modify Date                     : 2017:07:19 10:54:12+08:00
Metadata Date                   : 2017:07:19 10:54:12+08:00
Thumbnail Width                 : 236
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 24096 bytes, use -b option to extract)
Producer                        : Adobe PDF library 15.00
Document ID                     : xmp.did:068b436a-4e75-0548-90e6-1fbac5719453
Instance ID                     : uuid:8976e8af-af04-4be7-a243-3d5ae77d60b4
Original Document ID            : uuid:9484d335-8365-40a6-a3bf-1a780d2f2cfa
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5d7a7487-cf62-604a-9278-1a92b4ad9c7f
Derived From Document ID        : xmp.did:5d7a7487-cf62-604a-9278-1a92b4ad9c7f
Derived From Original Document ID: uuid:9484d335-8365-40a6-a3bf-1a780d2f2cfa
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:8875fce2-1190-8943-846c-fc3a28efe73f, xmp.iid:068b436a-4e75-0548-90e6-1fbac5719453
History When                    : 2015:11:11 09:32:17+08:00, 2017:02:07 15:05:45+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Windows), Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 503.061111
Max Page Size H                 : 536.927778
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Helvetica-Oblique, Helvetica, Roboto-MediumItalic, Roboto-Bold, Roboto-Medium, Roboto-Light, Roboto-Regular, SimHei, SourceHanSansCN-Light, AdobeSongStd-Light, SourceHanSansCN-Normal, SourceHanSansCN-Medium, SourceHanSansCN-Regular, SourceHanSansCN-Bold
Font Family                     : Arial, Helvetica, Helvetica, Roboto, Roboto, Roboto, Roboto, Roboto, 黑体, 思源黑体 CN, Adobe 宋体 Std, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN
Font Face                       : Regular, Oblique, Regular, Medium Italic, Bold, Medium, Light, Regular, Regular, Light, L, Normal, Medium, Regular, Bold
Font Type                       : Open Type, TrueType, TrueType, TrueType, TrueType, TrueType, TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 6.90, Version 1.3 (Hewlett-Packard), Version 1.3 (Hewlett-Packard), Version 2.000980; 2014, Version 2.000980; 2014, Version 2.000980; 2014, Version 2.000980; 2014, Version 2.000980; 2014, Version 5.03, Version 1.004;PS 1.004;hotconv 1.0.82;makeotf.lib2.5.63406, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.004;PS 1.004;hotconv 1.0.82;makeotf.lib2.5.63406, Version 1.004;PS 1.004;hotconv 1.0.82;makeotf.lib2.5.63406, Version 1.004;PS 1.004;hotconv 1.0.82;makeotf.lib2.5.63406, Version 1.004;PS 1.004;hotconv 1.0.82;makeotf.lib2.5.63406
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, Helvetica Oblique.ttf, Helvetica.ttf, Roboto-MediumItalic_2.ttf, Roboto-Bold_3.ttf, Roboto-Medium_2.ttf, Roboto-Light_2.ttf, Roboto-Regular_3.ttf, simhei.ttf, SourceHanSansCN-Light_1.otf, AdobeSongStd-Light.otf, SourceHanSansCN-Normal_1.otf, SourceHanSansCN-Medium_1.otf, SourceHanSansCN-Regular_1.otf, SourceHanSansCN-Bold_1.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 2
For                             : xie mass,
Bounding Box                    : -149 -985 1109 380
Container Version               : 9
Creator Version                 : 21
Author                          : hello

EXIF Metadata provided by EXIF.tools