Flairency SL-1550-T15 Audio/ Video Transmitter User Manual SL 1550 T15 Manual pub

Flair Agency Audio/ Video Transmitter SL 1550 T15 Manual pub

Users Manual

►FCC Part 15 Compliant ► to Select From ► to any Frequency Between 2.410GHzand 2.472GHz with 1 MHz Resolution ► Range ►4 Digit LED Display of SelectedChannel ►4 Digit LED Display of Power Level ►Easy to Use Channel SelectionButtons ►Compact and Lightweight ELITE–SERIES Model: SL-1550-T15 Contact: NextLink Video Communications Tel: 1-520-889-1340 available on the market today for mobile broadcast applications ►►►Locking Power Connector ►Built In Camera Mount FCC ID: XXXYYYYYYYYYYY FEATURES: 32 Preset Channels Available Each Channel can be Preset Wide 10VDC to 40VDC Input Power Introducing the most full featured Wireless Audio/Visual Transmitter Wireless 2.4 GHz A/V Transmitter NTSC Video Input Line Level Audio Input
Elite Series Wireless A/V Transmitter Model SL-1550-T15 Specifications Summary ► Channels: 32 Programmable Preset Channels ► Size: 4.12” x 3.67” x 1.25” ► Frequency Range: 2.410GHz—2.472GHz ► Weight: 300 Grams ► Programmable Resolution: 1 MHz ► Case Type: Extruded Aluminum ► RF Power: Compliant with FCC Part 15 ► Video Connector: BNC ► Antenna Connector: Reverse SMA ► Audio Connector: RCA ► Antenna Type: Tilt Swivel Base 0db Gain ► Power Connector: 3 Pin Locking DIN ► Input Power: 10VDC-40VDC @ < 1A ► Operating Temperature: -20° to 120° F (-30o to +50o C) ► Warranty: 1 Year (Specifications subject to change without notice) Operating Instructions Power ON/OFF Operation: 1) Press the POWER button to turn the unit ON, press again to turn OFF. To set the transmission Channel: 1) Press the Channel Set button for 1 second and release. The Channel LED display will begin to flash. 2) Press the ▲ or ▼ buttons until the desired Channel is displayed. 3) Press the Channel Set button to store and the Channel LED display will stop flashing. Notes: • Only the programmed Channels are displayed for selection • Holding the ▲ or ▼ buttons down continu-ously will fast scroll through the Channel and Power Level selections • Selected Channels are stored in non-volatile memory and remain set during power OFF • Power Level is preset at the factory at for compliance with FCC Part 15. The Power Level; LED display indicates “PL01”.
Elite Series Wireless A/V Transmitter Model SL-1550-T15 Channel Frequency Programming Instructions 1) Press the Channel Set button for > 5 seconds. 2) Release the Set button once both the Channel LED display and Power Level LED display go blank. 3) The Channel LED display and Power Level LED display will begin to flash. The Power Level LED display will now indicate the frequency that is currently programmed for the displayed Channel number. 4) Press the Channel ▲ or ▼ buttons until the desired Channel to be programmed is dis-played. 5) Press the Power Level ▲ or ▼ buttons until the desired Frequency for the selected Channel to be programmed is displayed. Note: Holding the Power Level ▲ or ▼ buttons down continu-ously will fast scroll through the Frequency range. 6) To delete a Channel from the active list press the Power Level ▼ button until all dashes are displayed. 7) Press the Channel Set button and release to store the Preset Frequency value. Note: The Channel LED display and the Power Level LED display will stop flashing for an instant indicating Channel frequency has been stored. 8) Repeat Steps 4) and 7) for all the desired Chan-nels have been programmed. 9) To exit the program operation, Press the Chan-nel Set button for > 5 seconds until both the Channel LED display and Power Level LED dis-play go blank. Then release the button. Factory Channel Default Presets The factory default Channel programming is as follows: Channel Frequency(MHz) CH01 2410 CH02 2430 CH03 2450 CH04 2470 To restore the unit to factory default Channel programming: 1) Turn the unit OFF 2) Hold down the Channel Set button and then turn the unit 3) Release the Channel Set button after the LED displays active Note: Changes or modifications not expressly approved by NextLink Video Communications could void the user’s authority to operate the equipment. NextLink Video Communications Tel: 1-520-889-1340

Navigation menu