Flairency SL-1550-T15 Audio/ Video Transmitter User Manual SL 1550 T15 Manual pub
Flair Agency Audio/ Video Transmitter SL 1550 T15 Manual pub
Users Manual
![](/img.php?id=1009685&img=bg1.png)
►FCC Part 15 Compliant
►
to Select From
►
to any Frequency Between 2.410GHz
and 2.472GHz with 1 MHz Resolution
►
Range
►4 Digit LED Display of Selected
Channel
►4 Digit LED Display of Power Level
►Easy to Use Channel Selection
Buttons
►Compact and Lightweight
ELITE–SERIES
Model: SL-1550-T15
Contact:
NextLink Video Communications
Tel: 1-520-889-1340
available on the market today for mobile broadcast applications
►
►
►Locking Power Connector
►Built In Camera Mount
FCC ID: XXXYYYYYYYYYYY
FEATURES:
32 Preset Channels Available
Each Channel can be Preset
Wide 10VDC to 40VDC Input Power
Introducing the most full featured Wireless Audio/Visual Transmitter
Wireless 2.4 GHz A/V Transmitter
NTSC Video Input
Line Level Audio Input
![](/img.php?id=1009685&img=bg2.png)
Elite Series Wireless A/V Transmitter
Model SL-1550-T15
Specifications Summary
► Channels: 32 Programmable Preset Channels ► Size: 4.12” x 3.67” x 1.25”
► Frequency Range: 2.410GHz—2.472GHz ► Weight: 300 Grams
► Programmable Resolution: 1 MHz ► Case Type: Extruded Aluminum
► RF Power: Compliant with FCC Part 15 ► Video Connector: BNC
► Antenna Connector: Reverse SMA ► Audio Connector: RCA
► Antenna Type: Tilt Swivel Base 0db Gain ► Power Connector: 3 Pin Locking DIN
► Input Power: 10VDC-40VDC @ < 1A ► Operating Temperature: -20° to 120° F
(-30o to +50o C)
► Warranty: 1 Year
(Specifications subject to change without notice)
Operating Instructions
Power ON/OFF Operation:
1) Press the POWER button to turn the unit ON, press again to turn OFF.
To set the transmission Channel:
1) Press the Channel Set button for 1 second
and release. The Channel LED display will
begin to flash.
2) Press the ▲ or ▼ buttons until the desired
Channel is displayed.
3) Press the Channel Set button to store and
the Channel LED display will stop flashing.
Notes:
• Only the programmed Channels are displayed
for selection
• Holding the ▲ or ▼ buttons down continu-
ously will fast scroll through the Channel and
Power Level selections
• Selected Channels are stored in non-volatile
memory and remain set during power OFF
• Power Level is preset at the factory at for
compliance with FCC Part 15. The Power
Level; LED display indicates “PL01”.
![](/img.php?id=1009685&img=bg3.png)
Elite Series Wireless A/V Transmitter
Model SL-1550-T15
Channel Frequency Programming Instructions
1) Press the Channel Set button for > 5 seconds.
2) Release the Set button once both the Channel
LED display and Power Level LED display go
blank.
3) The Channel LED display and Power Level LED
display will begin to flash. The Power Level LED
display will now indicate the frequency that is
currently programmed for the displayed Channel
number.
4) Press the Channel ▲ or ▼ buttons until the
desired Channel to be programmed is dis-
played.
5) Press the Power Level ▲ or ▼ buttons until the
desired Frequency for the selected Channel to
be programmed is displayed. Note: Holding the
Power Level ▲ or ▼ buttons down continu-
ously will fast scroll through the Frequency
range.
6) To delete a Channel from the active list press
the Power Level ▼ button until all dashes are
displayed.
7) Press the Channel Set button and release to
store the Preset Frequency value. Note: The
Channel LED display and the Power Level LED
display will stop flashing for an instant indicating
Channel frequency has been stored.
8) Repeat Steps 4) and 7) for all the desired Chan-
nels have been programmed.
9) To exit the program operation, Press the Chan-
nel Set button for > 5 seconds until both the
Channel LED display and Power Level LED dis-
play go blank. Then release the button.
Factory Channel Default Presets
The factory default Channel programming is as follows:
Channel Frequency(MHz)
CH01 2410
CH02 2430
CH03 2450
CH04 2470
To restore the unit to factory default Channel programming:
1) Turn the unit OFF
2) Hold down the Channel Set button and then turn the unit
3) Release the Channel Set button after the LED displays
active
Note: Changes or modifications not expressly approved by NextLink Video Communications
could void the user’s authority to operate the equipment.
NextLink Video Communications
Tel: 1-520-889-1340