Fleetwood Group V240S Low Power RF and IR Module User Manual CERTIFICATE OF COMPLIANCE

Fleetwood Group Inc Low Power RF and IR Module CERTIFICATE OF COMPLIANCE

User Manual

Rhein Tech Laboratories, Inc. Client: Fleetwood Group, Inc. 360 Herndon Parkway Model: V240S Suite 1400 Standards: FCC 15.249/IC RSS-210 Herndon, VA 20170 http://www.rheintech.com FCC/IC ID: FBRV240S/1859A-V240S Report #: 2010235 Page 28 of 38 Appendix L: Manual Please refer to the following pages.
USER MANUAL V240S Module
ii Copyright 2007 Fleetwood Group, Inc., Electronics Division. All rights reserved. Licensed software products are owned by Fleetwood Group, Inc. or its suppliers and are protected by United States copyright laws and international treaty provisions. Fleetwood Group, Inc. products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and pricing are subject to change without notice. Printed in the U.S.A. Fleetwood Group, Inc. Electronics Division 11832 James St. Holland, Michigan 49424 www.fleetwoodgroup.com Sales: 1-800-257-6390 Technical Service: 1-888-GO-REPLY (467-3759) Reply® is a registered trademark of Fleetwood Group, Inc. Other trademarks contained herein are the property of their respective holders. Revision History: Rev Date Description A 2/3/2011 Original
iii Table of Contents 1.0 V240S MODULE .................................................................................................................................................. 4 1.1 DESCRIPTION ....................................................................................................................................................... 4 1.2 BATTERY REPLACEMENT ..................................................................................................................................... 4 1.3 FCC AND IC ......................................................................................................................................................... 4 1.4 STANDARDS AND GUIDELINES ............................................................................................................................. 4 1.5 FCC/IC COMPLIANCE .......................................................................................................................................... 5
4 1.0 V240S Module 1.1 Description The V240S is a low power real time locating system sensor. The V240S module is used to identify the location of an individual or asset location. It communicates at 2.4GHz, to a badge module or a link module, and uses an IR receiver that receives data from a badge to determine its location. The overall operation of the V240S module is controlled by a microcontroller. This microcontroller is powered from an internally regulated supply, and uses a 16 MHz reference. The V240S module can be powered from batteries, approximately 4.5V, or low voltage DC. The microcontroller handles control of the RF and IR communications, indicator LEDs, external I/O, and external serial communications. RF communications use a 2.4 GHz transceiver. The transceiver chip uses a 16 MHz reference oscillator that is shared with the microcontroller for TX/RX, and is also powered by an internally regulated supply. The transceiver uses an integral antenna on the PCB. 1.2 Battery Replacement The V240S can be powered from 3, D Cell batteries. The batteries are replaceable. To replace the batteries, open the case, remove the old batteries, and replace with new batteries noting their polarity. 1.3 FCC and IC V240S Module Responsible Party Pertaining to the Declaration of Conformity Fleetwood Group, Inc. 11832 James Street Holland, MI 49424 Attn: Product Service Coordinator Phone: 888-467-3759 1.4 Standards and Guidelines This device complies with the following USA/Canada Regulations:  The USA Federal Communications Commission (FCC) Rules and Regulations  Industry Canada Rules and Regulations This device complies with the following national and international standards:  FCC Part 15B, 15.249 (10-01-09)  IC RSS-210 Issue 8
5 1.5 FCC/IC Compliance This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device.

Navigation menu