Flextronics QD10 Wireless Charger User Manual User Guide 9 18 2015x

Download:
Mirror Download [FCC.gov]
Document ID	2830758
Application ID	++3Xy15ofVKWwmxDjMXLqA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.02kB (287699 bits)
Date Submitted	2015-12-04 00:00:00
Date Available	2016-06-01 00:00:00
Creation Date	2017-08-30 19:15:45
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-08-30 19:15:45
Document Title	Microsoft Word - User Guide_9-18-2015.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	katherine

OWNER’S MANUAL
Energy Pouch
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
CONTENTS
IMPORTANT INFORMATION
ABOUT YOUR POUCH
WHAT’S INCLUDED?
GET TO KNOW YOUR ENERGY POUCH
POWER CONSOLE AND ICONS
HOW TO USE YOUR ENERGY POUCH
FAQS AND TROUBLESHOOTING
10
PRODUCT SAFETY, TIPS, AND PRECAUTIONS
11
COPYRIGHTS AND OTHER NOTICES
14
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
IMPORTANT INFORMATION
Read these simple guidelines. Not following them may be dangerous or illegal.
COMPATIBILITY
This pouch is compatible with the iPhone® 6, iPhone 6S, Samsung® Galaxy S6,
and Samsung Galaxy S6 Edge only. It will not work with other phones or
devices.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
BATTERIES, CHARGERS, AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories approved by Flextronics for
use with this device. Do not connect incompatible products.
KEEP YOUR DEVICE DRY
Your device is not water‐resistant. Keep it dry.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
ABOUT YOUR POUCH
Cables, wires, and searching for an outlet cramp everyone’s style. With the wireless
charging Energy Pouch, you can discreetly charge the battery of your smartphone
without connecting to any cables or wall outlets. Just slip the phone into the charging
pocket located in the pouch and voila! This is wireless charging!
The wireless charging power console inside the Energy Pouch lets you know if your
phone is charging or if the Energy Pouch itself needs a recharge when you get home.
The Energy Pouch is compatible with the iPhone® 6, iPhone 6S, and the Samsung®
Galaxy S6 and S6 Edge only. This guide provides instructions for using the wireless
charging Energy Pouch with these phones. For more information about these phone
models, consult the individual phone user guides.
WHAT’S INCLUDED?
 Wireless charging Energy Pouch
 Phone case (required for iPhone 6/6S)
 Let’s get started guide
 Power adapter with USB cable


OWNER’S MANUAL PN XXXXXXX DRAFT 3


OWNER’S MANUAL
Energy Pouch
GET TO KNOW YOUR ENERGY POUCH
These are the key parts of your pouch.


 Power console
 Wireless charging pocket
POWER CONSOLE and ICONS
The power console is located in the interior compartment of your Energy Pouch.
Power switch to turn on wireless charger in order to wirelessly
charge your phone.
Pouch wireless charger power status icon that indicates the wireless
charger battery level and activity of your pouch’s wireless charger.
Phone wireless charging status icon indicates whether or not your
phone is charging wirelessly in the pouch.
microUSB charging port for the pouch, not your phone. To be used
with the provided microUSB cable and power adapter in order to
charge the pouch’s battery.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
POUCH ICON STATES
The Pouch Icon communicates the power status of your Energy Pouch.
Solid: Pouch is plugged in and is charging
Blinks: Wireless charger power is low. Charge pouch.
Blinks: Pouch is not charging. The power adapter or cable are not plugged
in correctly. Please make sure to use the wall adapter and USB cable
shipped with the energy pouch.
No Color: The pouch wireless charger battery is nearly depleted.
Recharge pouch.
PHONE ICON STATES
The Phone Icon communicates the status of your phone charging wirelessly in your
Energy Pouch.
Solid: Pouch wireless charging pocket is on and ready to charge your
phone.
Blinks: Your phone is charging wirelessly in the pouch in the charging
pocket.
No Color: Your phone is not charging. The pouch’s wireless charging
pocket is “off”.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
HOW TO USE YOUR ENERGY POUCH
Follow these instructions to start charging your phone wirelessly with the
Energy Pouch.
1. Charge your Energy Pouch.
Insert the USB cable in the microUSB charging port on the power console
of your pouch and plug the power adapter into a power outlet.
The pouch icon illuminates green , , indicating that the pouch is plugged into
a power outlet and charging the wireless charging battery.
IMPORTANT: Proper charging of your pouch requires the use of the supplied
power adapter and cable.
2. Attach the phone case onto the back of your phone.
iPhone 6/6S:
Snap the connector at the base of the case into the charging port of your iPhone
6/6S. (The case is required for use.)
Samsung Galaxy S6 Edge:
Snap the case to the back of your phone. (The case is not required for use.)
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
3. Now, charge your phone wirelessly!
Insert the phone, front side facing outwards, into the mesh sleeve of the
charging pocket in your pouch.
Snap the button of the pocket shut to keep your phone secure.
Slide the power switch on the power console to reveal the green background,
(“on” position). The phone status icon reveals green indicating that your phone
is charging wirelessly. To turn off wireless charging, slide the power switch on
the power console to reveal the red background, (“off” position).
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
FAQs AND TROUBLESHOOTING
Q: How do I clean my pouch?
A: Use a wet cloth and rub the pouch until it is saturated, but not wet. A good tip is to
use the cloth on a small portion of the pouch before expanding, in order to make sure
the leather is not damaged.
Q: How do I know when the pouch is charged and ready to use?
A: The purse LED charging indicator will turn off.
Q: How do I know when my phone is fully charged?
A: By looking at the phone battery indicator. If the phone charging LED indicator is
green, then the phone is ready for use!
Q: How long does it take to charge my phone?
A: The charging depends on the phone for a fully discharged phone it takes
approximately 3‐4 hours.
Q: How long does it take to charge my energy pouch?
A: Approximately 4‐5 hours.
Q: The phone charging LED indicator isn’t blinking.
A: Please reposition the phone in the pocket into the optimal charging position.
Q: What should I do when the purse LED alternating blinking green and red..
A: Please use the wall adapter and the USB cable shipped with the energy pouch for
charging your pouch
Q: Where do I call for support?
A: XYZ
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
PRODUCT SAFETY, TIPS, AND PRECAUTIONS
How to take care of your pouch.
Handle your pouch, charger and accessories with care.
The following suggestions will help you keep your pouch operational.
Keep the pouch dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that corrode electronic circuits. If your pouch gets wet, let it dry.
WARNING: Failure to follow these safety instructions could result in fire, electric shock,
injury, or damage to phone or other property. Read all the safety information below
before using Energy Pouch.
Battery charging tips and precautions
Charge the battery before using it for the first time or when it has been unused for
extended periods.
If the battery is completely discharged, the device cannot be turned on immediately
after the charger is connected. Allow the depleted battery to charge for several minutes
before turning on the device.
Using a power source other than the USB power adaptor, such as a computer, may
result in a slower speed or not charging due to a lower electric current.
The device can be used to charge your phone while charging the Energy Pouch, but it
may take longer to fully charge the battery. Please make sure the power switch is
turned to ON position.
While charging, the device and the charger may heat up. This is normal and should not
affect the device’s lifespan or performance. If the battery gets hotter than usual, the
charger may stop charging.
Battery
Don’t attempt to replace the Energy Pouch battery yourself—you may damage the
battery, which could cause overheating and injury.
Using damaged cables or wall adapters, or charging when moisture is present, can
cause fire, electric shock, injury, or damage to the phone or other property. Make sure
the USB cable is fully inserted into the power adapter before plugging the adapter into
a power outlet.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
Use the Energy Pouch for intended purposes only. Improper use or use of incompatible
chargers may present a risk of fire, explosion, or other hazard. Never use a damaged
charger.
Do not attempt to wirelessly charge a phone other than an iPhone 6, iPhone 6S,
Samsung Galaxy S6, or Samsung Galaxy S6 Edge.
Do not use with a damaged, cracked or open battery case or a phone that is not
compatible.
Storage
Do not use or store the pouch in dusty or dirty areas as it will affect its performance.
Do not store the device in high temperatures, such as a parked car in the sun, or in cold
temperatures.
Operating temperature
It is recommended to use your energy pouch at temperatures from 5C to +35C.
Do not store your energy pouch in very hot or very cold areas.
The phone can be damaged and your battery life can be shortened if stored or operated
outside of these temperature ranges. Avoid exposing the phone and Energy Pouch to
dramatic changes in temperature or humidity. When using the Energy Pouch, it is
normal for the batteries to become warm.
Handling
Do not drop, knock, or shake the pouch. Rough handling can break it.
Only use a soft, clean, dry cloth to clean the surface of the power console.
During extended operation, the device may feel warm. In most cases, this is normal.
Using connectors, ports, and switches
Never force a connector into a port or apply excessive pressure to a switch, because this
may cause damage. If the connector and port don’t join with reasonable ease, they
probably don’t match. Check for obstructions and make sure that the connector
matches the port and that you have positioned the connector correctly with respect to
the port.
Repairs and unauthorized modifications
Do not open the Energy Pouch to reveal the components.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
Do not open the Energy Pouch to replace the batteries.
Unauthorized modifications may damage the device and violate regulations governing
radio devices.
Recycle
Always return your used electronic products, batteries, and packaging materials to
dedicated collection points. This way you help prevent uncontrolled waste disposal and
promote the recycling of materials. All materials of the device can be recovered as
materials and energy. Check how to recycle your products at www.call2recycle.org.
Implanted medical devices
To avoid potential interference, manufacturers of implanted medical devices
recommend a minimum separation of 15.3 centimeters (6 inches) between a wireless
device and the medical device.
Persons who have such devices should:
Always keep the Energy Pouch more than 15.3 centimeters (6 inches) from the
medical device.
Switch the Energy Pouch off if there is any reason to suspect that interference is
taking place or if you would not like to wirelessly charge your phone.
Follow the manufacturer directions for the implanted medical device. If you
have any questions about using your Energy Pouch with an implanted medical
device, consult your health care provider.
OWNER’S MANUAL PN XXXXXXX DRAFT 3
OWNER’S MANUAL
Energy Pouch
COPYRIGHTS AND OTHER NOTICES
DECLARATION OF CONFORMITY
FCC/INDUSTRY CANADA NOTICE This device complies with part 15B of the FCC rules
and Industry Canada licence‐exempt RSS standard(s). Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. For more info, go to
transition.fcc.gov/oet/rfsafety/rffaqs.html. Any changes or modifications not expressly
approved by Flextronics could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:



Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co‐located or operating in conjunction with any other antenna or
transmitter.
OWNER’S MANUAL PN XXXXXXX DRAFT 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : katherine
Create Date                     : 2015:11:02 14:35:21-08:00
Modify Date                     : 2015:11:23 10:06:15-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : katherine
Title                           : Microsoft Word - User Guide_9-18-2015.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:11:23 10:06:15-08:00
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Document ID                     : uuid:b3c771ce-2c3d-405b-81b9-2e8b138e9d5a
Instance ID                     : uuid:4a18b8e8-d3d5-458c-94de-8b6df0c39e9f
Page Count                      : 14

EXIF Metadata provided by EXIF.tools