Flir BelgiumBA RAY215 Marine Transceiver User Manual

Raymarine UK Ltd. Marine Transceiver Users Manual

a href="https://usermanual.wiki/Flir-BelgiumBA" itemprop="url"> Flir BelgiumBA >

Users Manual

OPERATIONS1 INTRODUCTIONYour RAY215 has the capability to transmit and receive on all available US,International and Canadian Marine VHF radiotelephone channels. There are channelsthat are FCC approved but may only be used by authorized stations for specificpurposes, depending on the type of vessel (commercial or noncommercial.) Refer toTable of Frequency List. These tables list all marine VHF channels available in yourRAY215 for US, International and Canadian radiotelephone use. Full familiarization ofthese tables is essential when selecting your channels to insure proper channel usage.2 CONTROLS AND LCD DISPLAY2.1 Controls1) Channel Selection (Knob)-. Clockwise rotation increases the channel number and counterclockwise decreases thechannel number.- This knob is also used to select digits and functions in the DSC mode.2) Volume Knob-. The volume knob controls the audio volume and is also switched to turn power on and off. When the knob is rotated clockwise from the “OFF” position, the radio will powerup. Further clockwise rotation increases the volume and counterclockwise rotationdecreases volume. The upper bar graph on the LCD displays the volume level.3) Squelch Knob-. When the Squelch knob is rotated clockwise, the squelch level is increased and whenrotated counterclockwise, the squelch level is decreased. The lower bar graph on theLCD displays the squelch level.4) SCAN/ MEM Key When the key is pressed and released, Alarm-1 is heard and a scan starts or stops. The key operation during a scan will cause the scan to stop, while the operation during stop a scan will start. When plural channels are stored in memory, pressing the key will initiate Memory Scan. In case no channel has been stored in memory, the key operation will initiate All Scan. To initiate All Scan when channels are stored in memory, the key is pressed again during its flashing. Pressing and holding the key for 3 consecutive seconds will store or cancel the current channel in memory with Alarm-1 put to sound. When the current channel has been stored, with the key operation the stored channel is cancelled. If not stored, the key operation will store the current channel in memory.5) WX/INT Key- When the WX/INT key is pressed and released, the Weather mode will be selected. Ifpressed and released again, the radio will return to the last used marine channel.-. If pressed and released while in the Dual Watch mode, the unit will enter the Tri-Watchmode.-. When pressed and held for 2 seconds, the Frequency Mode (US, CAN, INT) is changed.6) MON/ 1/25 Key-.When MON/ 1/25 is pressed and released, a tone is heard and the radio initiates the DualWatch function of the Monitor mode.
Download:
Mirror Download [FCC.gov]
Document ID171325
Application IDSpWIU464sElmyroafS1E9Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize41.86kB (523265 bits)
Date Submitted2001-09-25 00:00:00
Date Available2001-11-14 00:00:00
Creation Date2001-09-25 14:02:54
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-09-25 14:02:57
Document TitleUsers Manual
FCC ID Filing: PJ5RAY215

Navigation menu