Flir BelgiumBA RAY49 VHF/FM Marine Transmitter with Class D DSC User Manual 81296 1www
Raymarine UK Ltd. VHF/FM Marine Transmitter with Class D DSC 81296 1www
Contents
- 1. User handbook Part 1
- 2. User handbook Part 2
User handbook Part 2
57 Chapter 5: Digital Selective Calling (DSC) The Ray49 includes equipment for Class “D” Digital Selective Calling (DSC). DSC protocol is a globally applied system used to send and receive digital calls. DSC uses a unique Maritime Mobile Service Identity (MMSI) number to direct DSC calls directly to your radio, much like a telephone number. Note: An MMSI number is required to operate the DSC equipment in this radio. You can obtain an MMSI from BoatUS (www.boatus.com). Once obtained, you can program the MMSI number yourself one time only using the operation described in “My MMSI ID“ on page 81. Otherwise, your Raymarine dealer can program or change the number for you. The Ray49 includes a separate dedicated receiver just for DSC communications on channel 70. When a DSC call is received, the radio automatically responds based on the type of call. When receiving a DSC call from another vessel or a coast station, an alert sounds and DSC data appears in the LCD–such as time of a call, the caller and the type and priority of a call. 5.1 DSC Call Menu You access DSC functions via the DSC menu. Press and hold the MENU/DSC key for 3 seconds to enter DSC call mode. 55 60 5 10 50 15 45 20 40 35 30 25 DSC MENU >INDIVIDUAL GROUP ALL SHIPS D10165-1 Note: Distress calls are made using the DISTRESS key. The Ray49 can make the following type of DSC calls: DSC Call Type Description DISTRESS Sends out your MMSI number, the nature of your Distress, and the position and time information currently displayed. This information is from NMEA data, if available, or the position data you have entered manually. This digital information lets other ships and shore stations equipped with appropriate DSC equipment know where you are and that you are in a Distress situation. Distress Calls are made using the DISTRESS key. INDIVIDUAL Makes a ROUTINE DSC call to a specific station identified by its MMSI number. 58 Ray49 Marine VHF Radio DSC Call Type Description GROUP Sends transmissions that are only received by radios sharing a common Group MMSI number. Up to 3 Group MMSI numbers can be stored and called. ALL SHIPS Sends out a message to all stations within range that you have important information but the situation is not serious enough for a Distress Call. All Ships calls should only be used if hailing for assistance on channel 16 fails. There are two types of All Ships Calls: SAFETY for advisory alerts and URGENCY for assistance when life is not in immediate danger. POSITION REQUEST This option enables you to request GPS position information from any vessel for which an MMSI number is known. You can specify the target vessel either by selecting it from your MMSI phonebook or by manually entering its MMSI number. You can also be requested to send out your position to someone else. RECEIVED CALLS Three separate logs listing all received DSC Call types by number and time of call. Entries are separated into the following: Distress Log, Call Log for all other types of DSC Calls, and Position Log. NOTE: You can place a call directly from a log to the station that is currently displayed. You can also add the displayed station to the DSC Phonebook. Making DSC Menu and Programming Selections D10023-1 There are two ways to make DSC menu and character selections in your radio: 1. Most examples in this chapter describe making selections using the CH/OK knob on the transceiver. 2. However, you can also press the microphone up/down keys to make your selections and then press the microphone HI/LO key to accept. Chapter 5: Digital Selective Calling (DSC) 59 5.2 Distress Calls For a Distress Call transmission, the Ray49 takes the position and time information (either from NMEA or manually input) along with your MMSI and converts it into a digital “packet”. When transmitted, this digital information lets other ships and shore stations equipped with appropriate DSC equipment know where you are and that you are in a Distress situation. Your call can specify the nature of the Distress (designated call) or not (undesignated call). Sending a Distress Call D10166-1 Lift the spring-loaded door on the front panel of the transceiver. Undesignated (Quick) Distress Call To send a distress call without specifying its nature: • Press and hold the red DISTRESS key for 3 seconds to initiate the call. During this time, the radio beeps, the display flashes and a timer counts down 03...02...01. 55 60 5 10 50 15 45 20 40 35 30 25 DISTRES CALL COUNTING DOWN... DISTRES CALL COUNTING DOWN... DISTRES CALL COUNTING DOWN... DISTRES CALL TRANSMITTING DISTRESS UNDESIGNATED D10168-1 PRESS and HOLD for 3 SECS 60 Ray49 Marine VHF Radio Designated Distress Call To send a distress call and specify its nature: 1. Press the red DISTRESS key. 2. Release the DISTRESS key. The Distress Call screen appears. 3. Rotate the CH/OK knob until the type of Distress you wish to designate is highlighted: • UNDESIG(NATED) • SINKING • FIRE • ADRIFT • FLOODING • ABANDONING • COLLISION • PIRACY • GROUNDING • MANOVERBD • LISTING • EXIT Release Press DISTRES CALL UNDESIG FIRE >FLOODING DISTRES CALL >UNDESIG FIRE FLOODING 16 DISTRES CALL >FLOODING HOLD DISTRES 3 SECONDS 16 16 D10167-1 4. Press the CH/OK knob to choose that type of Distress. 5. Press and hold the DISTRESS key for 3 seconds to initiate the call. During this time, the radio beeps, the display flashes and a timer counts down 03...02...01... , just as with the Undesignated Distress Call illustrated above. 55 60 5 10 50 15 45 20 40 35 30 25 PRESS and HOLD 3 SECS Chapter 5: Digital Selective Calling (DSC) 61 Transmitting After the Distress transmission, the radio is automatically set to channel 16 at high power to listen for and respond to voice replies from Coast Guard or other vessels that may have received your Distress Call. To mute the alarm: Press CLR/WX. To manually cancel the automatic Distress resend: Press CLR/WX a second time. The Distress Call is resent randomly every 3.5 – 4.5 minutes until an acknowledgement is received or the call is manually cancelled. Receiving Acknowledgement After the call is sent, the radio waits for acknowledgement. The display stops flashing and the alarm sounds continuously until muted or an ACK is received. DISTRES CALL AWAIT ACK AUTO TRANSMIT 16 DISTRES ACK RECEIVED 16 FROM: 001234567 ORIGINATOR: 366123456 16 FLOODING 26 06.0098N 080 04.8589W 12:45UTC 16 D10169-1 REPEATS Cancelling a Distress Call Made in Error If the countdown has not been completed, release the DISTRESS key before the countdown has completed. If the countdown has completed and the distress call has been sent in error, you should make an announcement as soon as possible that the distress situation does not exist. 1. Immediately press CLR/WX two times to cancel the Distress Call. The radio returns to the state before the Distress Call. 2. Press the 16/9 key. The radio switches to the Priority Channel. 3. Make a broadcast to all stations giving your ship’s name, call sign and MMSI number and cancel the false distress alert. For example: “All Stations, All Stations, All Stations. This is NAME, CALL SIGN, MMSI ID, POSITION. Cancel my distress alert of DATE, TIME, NAME, CALL SIGN.” 62 Ray49 Marine VHF Radio Receiving a Distress Call The Ray49 receives distress messages sent by another vessel and/or acknowledgments (ACK) sent by a coast station to another vessel in distress. The radio also receives distress relays. Note: Class “D” DSC radios such as the Ray49 are forbidden by law from automatically acknowledging or relaying DSC distress calls. Upon receiving a distress call, you may hail the vessel in distress on channel 16 and standby to lend assistance if requested. When a Distress Call is received, the Ray49 automatically tunes to channel 16 and sounds the Distress Alarm Tone. (If you have disabled automatic channel changing, as described on page 84, you are first prompted whether to accept the call.) Two alternating screens appear in the display. When position data and time is included within the signal, it is displayed on the first screen in the text area of the LCD. The second screen shows the nature of the distress and time it was sent. The 2 alternating pages of data are recorded in the Distress Log. The envelope icon ( ) blinks until you accept the call, reject the call, or open the resulting unread message stored in the Log. See page “Received Calls (Logs)“ on page 79. To merely mute the alert tone: Press CLR/WX. To ignore the Distress Call: Press CLR/WX a second time. The envelope icon disappears, the call is interrupted, the radio declines the channel change and returns to normal operation. To accept a Distress Call when Auto Channel Change is OFF 1. Press the CH/OK knob. The alert tone is muted, the envelope icon disappears and the radio accepts the channel change and switches to channel 16. 2. Press CH/OK again to clear the message that the channel has been changed. Press PTT to communicate on channel 16. To accept a Distress Call when Auto Channel Change is ON Press CH/OK. The alert tone is muted, the envelope icon disappears and the radio automatically switches to channel 16. Press PTT to communicate. Chapter 5: Digital Selective Calling (DSC) 63 ...with Auto Channel Change OFF DISTRESS FROM: 366123456 DISTRESS CH CHANGE REQ TO CH16 DISTRESS FIRE 26 06.0098N 080 04.8589W DISTRESS 12:34UTC PRESS [OK] OR PRESS [CLR] DISTRESS CH HAS BEEN CHANGED PRESS [OK] 16 72 72 72 72 SHIP/SHIP 27 12.1297N 079 24.4544W PM12:44LOC ...with Auto Channel Change ON PRESS [OK] 16 16 16 16 DISTRESS 27 12.1297N 079 24.4544W PM12:44LOC 16 DISTRESS FROM: 366123456 DISTRESS CH HAS BEEN CHANGED DISTRESS FIRE 26 06.0098N 080 04.8589W DISTRESS 12:34UTC 72 D10170-1 Note: The AUTO CH CHG option determines whether you want your radio automatically switched to channel 16 to receive the call or instead to be prompted to manually receive or decline the channel change. See page 84. Receiving a Distress Relay Sent by Another Station When a Distress Relay is received, an alarm sounds, the envelope icon blinks, and the LCD displays two alternating screens. Page 1 displays the Name/MMSI ID of the station sending the message. Page 2 displays the Name/MMSI ID of the vessel in distress and its lat/lon position. The radio does not resend distress relay messages. 64 Ray49 Marine VHF Radio 5.3 DSC Phonebook The Phonebook stores up to 31 preprogrammed MMSI numbers that you can select for making an Individual Call. The numbers are stored by name and contain the station’s MMSI number. You can add, edit and delete entries from the Phonebook, much as you would on a cellular telephone. The NAME field can be up to 10 alpha-numeric characters (all capitals) in length. 13 symbols are also available. Rotate the CH/OK knob to make an item appear on the dot matrix display and then press in CH/OK to select that item. Adding a new Entry 1. From the DSC menu, rotate the CH/OK knob until the arrow points to PHONEBOOK. 2. Press in the CH/OK knob to select. The list of Phonebook entries appears. The arrow is pointing to. If no entries have yet been entered, this is your only choice. 3. Press the CH/OK knob again to select. You are prompted to enter the MMSI number for the new entry. The first character space to be modified is highlighted with a flashing underline. 16 ENTER MMSI: _-------ENTER NAME: ----------- 16 PHONEBOOK >[NEW] [BACK] 16 D10227-1 DSC MENU POS REQUEST RECV'D CALL >PHONEBOOK 4. Rotate the CH/OK knob. The flashing underline is replaced with a numeric character. Continue rotating the knob to scroll through the selections. 5. When the appropriate number appears, press the CH/OK knob to accept. The next character to be filled in sequence is then underlined. ENTER MMSI: 3-------ENTER NAME: ----------- 65 16 ENTER MMSI: 3_------ENTER NAME: ----------- 16 D10228-1 Chapter 5: Digital Selective Calling (DSC) ENTER MMSI: 366123456 ENTER NAME: ----------- 16 ENTER MMSI: 366123456 ENTER NAME: _---------- 16 D10229-1 6. Continue this process until all MMSI digits have been entered. 7. When you press CH/OK to accept the final MSSI ID digit, the cursor moves on to the NAME field. The first character in this line is a symbol assigned by the radio, based on the MMSI number you entered. ENTER MMSI: 366123456 ENTER NAME: T --------- 16 ENTER MMSI: 366123456 ENTER NAME: TOTL MADNE_ 10. When complete, press CH/OK to accept. 11. Press CH/OK again to SAVE. The new entry appears in the list. 16 D10230-1 Coast Stations are identified by “00” at the beginning of the station name. If you enter 00 as the leading digits of the MMSI ID, the radio recognizes this as a coast station and automatically enters a tower symbol ( ). If you enter a number other than 0 in the initial position of the MMSI ID, an anchor symbol ( ) is entered as a prefix to the name, identifying this as a Ship Station. 8. The first character space to be modified is highlighted with a flashing underline. Using the same procedure as above, rotate the CH/OK knob to select the NAME characters. All alpha and numeric characters are available, as well as 13 symbols: ! # % ’ ( ) : ? / . , + 9. Press CH/OK to accept. Continue this process until all NAME characters have been entered. Ray49 Marine VHF Radio 366123456 TOTL MADNES >SAVE CANCEL 16 PHONEBOOK [NEW] > TOTL MADNES [BACK] 16 D10231-1 66 Editing an Existing Entry 1. From the Phonebook, rotate the CH/OK knob until the arrow is pointing to the entry you wish to edit. 2. Press CH/OK. The list of options appear. 3. Rotate the CH/OK knob until the arrow is pointing to EDIT 4. Press CH/OK to select. 5. Make your changes to the NAME and MMSI ID, using CH/OK. 6. When finished, press CH/OK to save your changes. The revised name or MMSI number appears in the list. Deleting an Existing Entry 1. From the Phonebook, rotate the CH/OK knob until the arrow is pointing to the entry you wish to edit. 2. Press CH/OK. The list of options appear. 3. Rotate the CH/OK knob until the arrow is pointing to DELETE. 4. Press CH/OK to confirm your selection.The entry is removed from the list. 5.4 Individual Calls The Ray49 can make Individual Routine calls. Making DSC Calls to Coast Stations The examples in this handbook illustrate making DSC calls to Ship Stations. However, the procedures for making Individual Calls to a Coast Station are different. Calls to a Ship Station require that you enter a subsequent working channel chosen from a pre-programmed list offered to you by the Ray49. Calls to a Coast Station remove this step from the operating procedures. The Coast Station controls and indicates the subsequent working channel within its acknowledgement. Chapter 5: Digital Selective Calling (DSC) 67 The Ray49 automatically detects the correct procedures for you based on the type of MMSI number you enter manually or with or the phonebook. If “00” is detected as the first two characters of the MMSI, Coast Station procedures are implemented automatically. Note: When making a call to a coast station, you will not be asked to select a working channel because that will be provided by the coast station. Transmitting an Individual Call To make an Individual Call to a ship or coast station, you must select the specific MMSI number to contact and the working channel to be used for the call. The MMSI ID can be entered manually or selected from a Phonebook list of preprogrammed numbers specified using the MENU function, as follows: 1. From the DSC menu, rotate the CH/OK knob until the arrow points to INDIVIDUAL. 2. Press CH/OK. The Individual Routine menu appears, which displays any Phonebook entries you have saved and for manual number entry. 3. Rotate the CH/OK knob until the arrow points to the desired individual name. 72 IND ROUTINE MANUAL > TOTL MADNES [BACK] 72 IND ROUTINE >MANUAL TOTL MADNES [BACK] 72 D10171-1 DSC MENU >INDIVIDUAL GROUP ALL SHIPS If using MANUAL MMSI ID entry: Enter the MMSI number using the CH/OK knob. Rotate CH/OK to select each character and then press in to accept. The next position to be modified is indicated by a blinking underline. A more-detailed description of manual character entry can be found in “Adding a new Entry“ on page 64. Ray49 Marine VHF Radio IND ROUTINE >MANUAL TOTL MADNES [BACK] 72 IND ROUTINE ENTER MMSI: _-------- IND ROUTINE 366123654 CALLING... 72 72 D10232-1 68 4. When the desired name is highlighted, press SELECT. 5. Rotate the CH/OK knob to select the working channel to be used for the Individual Call and then press in CH/OK to accept. Select from 06, 08, 09, 10, 13, 16, 17, 67, 68, 69, 71, 72, 73 or 77. Note: Individual Calls to a Coast Station remove this step from the operating procedures. The Coast Station controls and indicates the working channel within its ACK. 6. Press CH/OK to transmit the call. The Individual Call is transmitted on channel 70, the radio tunes to the original channel and waits for acknowledgement. During this period you are still able to receive calls. IND ROUTINE TOTL MADNES CALLING... 72 70 IND ROUTINE TOTL MADNES SELECT CH PRESS [OK] 68 D10172-1 IND ROUTINE TOTL MADNES SELECT CH PRESS [OK] 7. When the acknowledgement is received, the radio automatically switches to the selected working channel and sounds a DSC Call alert ring. Press CH/OK to confirm. IND ROUTINE TOTL MADNES AWAITING ACK 72 69 ACK RECEIVED TOTL MADNES CH HAS BEEN CHANGED 68 ACK RECEIVED TOTL MADNES PRESS [OK] 68 D10173-1 Chapter 5: Digital Selective Calling (DSC) Press PTT to communicate on the specified channel. Pressing PTT at any time before an ACK is received cancels the Individual Call Receiving Individual Calls When an Individual Call is received, an alert tone sounds, the envelope icon blinks and the LCD alternates among 3 screens displaying the name (or MMSI ID) of the station initiating the call and that a request for a change of working channels is being made. The channel does not change until you accept. INDIVIDUAL ROUTINE FROM: GOOD RX 68 INDIVIDUAL ROUTINE CH CHANGE REQ TO CH72 68 INDIVIDUAL ROUTINE PRESS OK OR PRESS CLR 68 D10174-1 The 3 alternating pages of data are recorded in the Call Log. The envelope icon ( ) blinks until you accept the call, reject the call, or open the resulting unread message stored in the Log. See page “Received Calls (Logs)“ on page 79. REPEATS To mute the alert tone: Press CLR/WX. Automatic cancellation takes place after 2 minutes. To ignore the Individual Call: Press CLR/WX a second time. The envelope icon disappears, the call is interrupted and the normal screen appears on the LCD. To accept an Individual Call: 1. Press CH/OK to change channels to the one designated by the caller. The alert tone is muted and the envelope icon disappears. 2. If the caller requests an acknowledgement, press CH/OK to send. 3. When the caller responds to the ACK, press CH/OK to return to standby mode. Establish voice communications on the designated channel by pressing PTT. If the caller requests that you change to an unsupported working channel the message INVALID CHANNEL appears on the LCD. If an acknowledgement is sent, the originating station is sent the message UNABLE TO COMPLY, indicating that your radio could not make the requested channel change. Ray49 Marine VHF Radio SEND ACK ABLE COMPLY >SEND CANCEL 68 CH HAS BEEN CHANGED PRESS [OK] 72 D10234-1 70 5.5 Group Calls The Group Call feature sends transmissions that are only received by radios sharing a common Group MMSI number, such as a flotilla or racing fleet. The Ray49 sends Group Routine calls. Group MMSI Setup You can program up to three Group MMSI ID numbers. Group MMSI ID numbers always begin with a zero (0). You only enter the last 8 digits of the Group ID number; the initial “0” is automatically entered for you. Adding a New Group 1. From the DSC menu, rotate the CH/OK knob until the arrow points to GROUP. 2. Press CH/OK to select. Group options appear, with the arrow pointing to CALL. 3. Rotate CH/OK until the arrow points to MY GROUP ID. 4. Press CH/OK to select. If existing Group MMSI ID numbers are already stored, those values appear. If blank, , , etc. are shown to indicate that the Group IDs have not yet been programmed. Select the first available empty group location. 5. Press CH/OK to select. The GROUP MMSI field appears. The initial “0” is automatically entered for you, indicating that this is a Group MMSI ID. The first character space that you can modify is highlighted with a flashing underline. 6. Fill in the GROUP MMSI fields one number at a time, using the CH/OK knob: • Rotate to CH/OK display the desired character. • Press in CH/OK to accept and move on to the next character space. Repeat this process to fill in all MMSI numbers. (A more-detailed description of manual character entry can be found in “Adding a new Entry“ on page 64.) 7. Press CH/OK to accept. 8. When complete, press CH/OK to confirm. The new entry appears in the list. Chapter 5: Digital Selective Calling (DSC) 71 Use the same procedure to edit an existing entry in the list. GROUP CALL >MY GROUP ID [BACK] 09 GROUP >CALL MY GROUP ID [BACK] 09 09 MY GROUP ID >[EMPTY 1] [EMPTY 2] [EMPTY 3] 09 Select Characters ENTER MMSI: 0_------ENTER NAME: ----------- ENTER MMSI: 036612345 ENTER NAME: RAYMARINE Press OK 09 09 MY GROUP ID >036612345 [EMPTY 2] [EMPTY 3] 09 D10175-1 DSC MENU INDIVIDUAL >GROUP ALL SHIPS Transmitting a Group Call To call another vessel in the group, select the Group Name to contact from the list of numbers described in the preceding section and the working channel to be used for the Group Call. 1. From the DSC menu, rotate the CH/OK knob until the arrow points to GROUP. 2. Press CH/OK to select. Group options appear, with the arrow pointing to CALL. 3. Press the CH/OK knob to select CALL. The group entries that you have saved appear. Point to the group name you wish to call. 4. Press CH/OK to select. 72 Ray49 Marine VHF Radio 5. Rotate CH/OK to select the working channel to be used for the call. 6. Press CH/OK to select. You are prompted to send the call or cancel the call. 7. Press CH/OK to transmit the Group Call. The Group Call is transmitted on channel 70, and the radio tunes to the designated working channel to be used for the Group Call. 8. Press CH/OK to confirm and converse on the designated channel. 69 GROUP >CALL MY GROUP ID [BACK] 69 GRP ROUTINE >036612345 036654321 [EMPTY] 69 GRP ROUTINE 036612345 SELECT CH PRESS [OK] 69 GRP ROUTINE 036612345 SELECT CH PRESS [OK] 72 GRP ROUTINE 036612345 >SEND CANCEL 72 TX COMPLETE CH HAS BEEN CHANGED PRESS [OK] 72 SHIP/SHIP 26 04.2172N 080 09.0933W AM11:57LOC 72 DSC MENU INDIVIDUAL >GROUP ALL SHIPS D10176-1 Chapter 5: Digital Selective Calling (DSC) 73 Receiving Group Calls The Ray49 can receive Group Routine Calls from anyone in your prearranged group. When a Group Call is received, the LCD alternates among 3 screens displaying the or MMSI ID of the station in the group initiating the call and that a request for a change of working channels is being made. GROUP ROUTINE GROUP: 036612345 71 GROUP ROUTINE CH CHANGE REQ TO CH68 71 GROUP ROUTINE PRESS OK OR PRESS CLR 71 D10177-1 The 3 alternating pages of data are recorded in the Call Log. The envelope icon ( ) blinks until you accept the call, reject the call, or open the resulting unread message stored in the Log. See page “Received Calls (Logs)“ on page 79. REPEATS To mute the alert tone: Press CLR/WX. Automatic cancellation takes place after 2 minutes. To ignore the Group Call: Press CLR/WX a second time. The envelope icon disappears, the call is interrupted and the normal screen appears on the LCD. To accept the Group Call: 1. Press CH/OK to change channels to the one designated by the caller. The alert tone is muted and the envelope icon disappears. 2. Press CH/OK to return to the standby mode. Establish voice communications on the designated channel by pressing PTT. CH HAS BEEN CHANGED PRESS [OK] 68 SHIP/SHIP 26 04.2172N 080 09.0933W AM11:57LOC 68 D10235-1 If the caller requests that you change to an unsupported working channel the message INVALID CHANNEL appears on the LCD. If an acknowledgement is sent, the originating station is sent the message UNABLE TO COMPLY, indicating that your radio could not make the requested channel change. 74 Ray49 Marine VHF Radio 5.6 All Ships Calls An All Ships Call sends out a message to all stations within range. The Ray49 can make All Ships Safety Calls for advisory alerts and Urgency Calls when assistance is required but life is not in danger. For example, you might send a Safety Call to warn others there is a large floating object that may be a hazard to navigation. A sample Urgency Call might be that you have an illness or an accident on board. The All Ships Call is made on channel 70, and then the radio automatically switches to channel 16 at high power for voice communications. Transmitting an All Ships Call DSC MENU INDIVIDUAL GROUP >ALL SHIPS ALL SHIPS URGENCY >SEND CANCEL 68 ALL SHIPS >URGENCY SAFETY [BACK] 68 68 TX COMPLETE CH HAS BEEN CHANGED PRESS [OK] 16 D10178-1 1. From the DSC menu, rotate the CH/OK knob until the arrow points to ALL SHIPS. 2. Press CH/OK to select. Choose the type of call you wish to make: URGENCY or SAFETY. 3. Press CH/OK again to transmit the call. The call is transmitted on channel 70, and then the radio tunes to channel 16 at high power. 4. Press CH/OK to reconfirm the All Ships Call. The radio returns to standby mode. Press PTT to communicate on channel 16. Receiving an All Ships Call How the radio processes an incoming All Ships Call depends upon the call’s priority. Routine and Safety calls have a lower priority than All Ships Urgency and Distress calls. Chapter 5: Digital Selective Calling (DSC) 75 All Ships Routine or Safety When an All Ships Routine or Safety Call is received, the LCD alternates among 3 screens displaying the name (or MMSI ID) of the station initiating the call and that a change of channels has been made. The 3 alternating pages of data are recorded in the Call Log. The envelope icon ( ) blinks until you accept the call, reject the call, or open the resulting unread message stored in the log. See page “Received Calls (Logs)“ on page 79. To mute the alert tone: Press CLR/WX. Automatic cancellation takes place after 2 minutes. To ignore the All Ships Call: ALL SHIPS SAFETY FROM: TRANQUILITY 71 ALL SHIPS SAFETY CH CHANGE REQ TO C16 71 ALL SHIPS SAFETY PRESS OK OR PRESS CLR 71 D10181-1 Press CLR/WX a second time. The envelope icon disappears, the call is interrupted and the normal screen appears on the LCD. REPEATS To accept an All Ships Routine or Safety Call: CH HAS BEEN CHANGED PRESS [OK] 16 DISTRESS 26 04.2172N 080 09.0933W AM11:57LOC 16 D10179-1 1. Press the CH/OK knob. The alert tone is muted, the envelope icon disappears and the radio switches to channel 16. 2. Press CH/OK again to confirm the channel change. The radio returns to standby mode. Press PTT to communicate on channel 16. All Ships Urgency or Distress Call For an Urgency or Distress Call, the Automatic Channel Change option (see page 84) determines how the call is handled. If set ON, the radio automatically switches to Priority Channel 16 for voice communications. If OFF, you are prompted to manually accept or decline the call and channel change by pressing CH/OK or CLR/WX, respectively. When set OFF, the icon appears. 76 Ray49 Marine VHF Radio To accept an All Ships Urgency or Distress Call when Auto Channel Change is OFF 1. Press CH/OK. The alert tone is muted, the envelope icon disappears and the radio switches to channel 16. 2. Press CH/OK again to confirm the channel change. The radio returns to standby mode. Press PTT to communicate on channel 16. To accept an All Ships Urgency or Distress Call when Auto Channel Change is ON Press the CH/OK knob. The alert tone is muted, the envelope icon disappears and the radio automatically switches to channel 16. Press PTT to communicate. If the caller requests that you change to an unsupported working channel the message INVALID CHANNEL appears on the LCD. If an acknowledgement is sent, the originating station is sent the message UNABLE TO COMPLY, indicating that your radio could not make the requested channel change. ...with Auto Channel Change OFF ALL SHIPS URGENCY FROM: 366123456 ALL SHIPS URGENCY CH CHANGE REQ TO CH16 ALL SHIPS URGENCY PRESS [OK] OR PRESS [CLR] DISTRESS CH HAS BEEN CHANGED PRESS [OK] 16 68 68 68 SHIP/SHIP 27 12.1297N 079 24.4544W PM12:44LOC ...with Auto Channel Change ON PRESS [OK] 16 16 16 DISTRESS 27 12.1297N 079 24.4544W PM12:44LOC 16 ALL SHIPS URGENCY FROM: 366123456 ALL SHIPS URGENCY CH HAS BEEN CHANGED ALL SHIPS URGENCY 68 D10180-1 Chapter 5: Digital Selective Calling (DSC) 77 5.7 Position Request With this option you can request GPS position information from any station capable of responding to this type of call and for which an MMSI number is known. You can specify the target station either by selecting it from your MMSI phonebook or by manually entering its MMSI number. Specifying the Target Vessel DSC MENU GROUP ALL SHIPS >POS REQUEST POS REQUEST [MANUAL] GULF TIDE > ISLANDER 69 POS REQUEST >[MANUAL] GULF TIDE ISLANDER 69 69 POS REQUEST ISLANDER >SEND CANCEL 69 D10182-1 1. Select POS REQUEST from the DSC menu. 2. Select the target station name from the phonebook. —or— Select and enter the target station’s MMSI number, as described in “Adding a new Entry“ on page 64. 3. Press SEND to transmit the Position Request Call. The call is transmitted on channel 70, and then the radio tunes to the original channel and waits for acknowledgement. During this period you are still able to receive calls. When the Position Request is accepted by the receiving station: When the position request is received, the Ray49 shows that the call has been accepted by the requested station. The radio sounds a Call Alert tone. Press any key to mute the alert tone. It shuts off automatically after two minutes. Press CLR/WX to exit to normal radio operation. You can retrieve the position information later using DSC MENU > RECV’D CALLS > POSIT’N LOG. Ray49 Marine VHF Radio POS REQUEST ISLANDER AWAITING POSIT'N 69 POS RCV'D 26 04.2172N 080 09.0933W 11:57UTC 69 POS RCV'D ISLANDER PRESS [OK] 69 D10183-1 78 REPEATS Retrieving the Last Received Position Data 1. From the DSC Menu, select RECV’D CALLS. 2. Rotate the CH/OK knob or press the up down arrow keys to select POSIT’N LOG. 3. Press CH/OK. The last received position request data (LAST CALL) is displayed. Note: Only the last position is saved. The next received position will overwrite the existing position data. Press BACK or the CLR/WX key to exit. Receiving a Position Request From Another Station If you receive a position request from another station, how the Ray49 responds depends on the option you have set in the Position Reply menu item (see page 85). OFF will not send position data under any circumstances. AUTO sends out your vessel’s position data as soon as it is requested. MANUAL sends out the data only after you respond to the request. The 2 alternating pages of data are recorded in the Posit’n Log. The envelope icon ( ) blinks until automatically accepted or you manually accept the call, reject the call, or open the resulting unread message stored in the Log. See page “Received Calls (Logs)“ on page 79. POSITION REQUEST FROM: SHIP SHAPE 78 GPS DATA OK SEND POSIT'N PRESS [OK] OR PRESS [CLR] REPEATS 78 POSITION HAS BEEN SENT PRESS [OK] 78 D10184-1 When a Manual Position Reply is received, the requesting station’s MMSI number or station name (if entered in the Phonebook) is displayed. Press CH/OK to accept the request to send your position data. Decline the request by pressing the CLR/ WX key. Chapter 5: Digital Selective Calling (DSC) 79 5.8 Received Calls (Logs) The radio maintains lists of the last received DSC call types by number and time of call. Separate logs are maintained for the following: 1. Distress (up to 10 entries, per log) • Distress Log • Distress ACK Log • Distress Relay Log 2. Call Log (up to 20 total entries) • Individual Calls • All Ship Calls • Group Calls 3. Position Log • Last call received If the calling vessel or station is listed in your DSC Phonebook, the vessel or station name appears in the display as it is listed. If the caller is not listed in your directory, the caller’s MMSI ID number appears in the display. When a DSC Call is received, the envelope icon blinks on the LCD and an asterisk (*) appears to the left of the appropriate log. The envelope icon and arrow symbol disappear when the log is opened. Coast Stations are identified by MMSI ID numbers beginning with”00”. If you have assigned a name for a Coast Station in the phonebook, a tower symbol ( ) precedes the name field in the log to identify it as such. Similarly, Group Stations have a single “0” in the initial MMSI number position. If the MMSI ID begins with any number other than “0”, an anchor symbol ( ) is entered as a prefix to the name, identifying this as a Ship Station. Station Type MMSI ID Layout Ship xxxxxxxxx Group 0xxxxxxxx Coast 00xxxxxxx Phonebook/ Log Symbol none 80 Ray49 Marine VHF Radio To view the Received Call Logs: 1. From the DSC menu, rotate the CH/OK knob until the arrow points to RECV’D CALL. 2. Press CH/OK. Three log categories appear: DISTRESS, CALL LOG and POSIT’N LOG. If any of these logs contain an unread item, an asterisk (*) appears to the left of the log name. 3. Rotate the CH/OK knob until the arrow points to the desired log. 72 RECV'D CALL DISTRESS >*CALL LOG POS LOG 72 RECV'D CALL >DISTRESS *CALL LOG POS LOG 72 D10236-1 DSC MENU ALL SHIPS POS REQUEST >RECV'D CALL *CALL-01 INDIVIDUAL ROUTINE AQUAHOLIC *CALL-02 ALL SHIPS SAFETY CASTAWAY 72 *CALL-01 REQ TO CH 68 PRESS [OK] FOR OPTIONS 72 72 *CALL-02 REQ TO CH 09 PRESS [OK] FOR OPTIONS 72 D10318-1 4. Press CH/OK to select. Entry 01 appears first with call type and time of the last call. This is the most recent call. 5. Using the CH/OK knob on the transceiver or CH up/down arrows on the microphone, scroll down the list of up to 30 entries. Chapter 5: Digital Selective Calling (DSC) 81 Log Entry Options OPTIONS >CALL BACK DELETE SAVE 72 D10319-1 The DSC Call Logs provide additional options for each entry. When the prompt appears PRESS [OK] FOR MORE OPTIONS, press the CH/OK knob. Select from the following: • Call Back. Makes a routine Individual Call to the caller listed in the entry. • Delete. Remove this entry from the log. • Save. Stores any undefined MMSI number into the Phonebook and enables you to assign a corresponding name to it. If a name is already assigned for this MMSI number in the phonebook, you are prompted to edit the name. 5.9 DSC Setup The DSC Setup menu item is used to determine the following functions: • the radio’s MMSI ID number • how your radio responds to a Position Reply request • whether your radio automatically changes channels for incoming Distress and All Ships Urgency Calls To adjust the DSC settings: 1. Press and hold the MENU/DSC key for 3 seconds to enter DSC Menu mode. 2. Rotate the CH/OK knob until the arrow points to DSC SETUP. 3. Press CH/OK to accept. The DSC Setup screen appears. Make your selection from the following options: • MY MMSI ID • AUTO CH CHG • POS REPLY My MMSI ID This operation stores the MMSI number required for DSC communications, including Distress Calls. If you try to access a DSC function before entering the MMSI number, an error message appears and you are prompted to enter the MMSI ID. 82 Ray49 Marine VHF Radio Note: You can obtain an MMSI number from BoatUS (www.boatus.com). This is a one time operation. After the MMSI number is programmed: • you will not be able to change it • only your dealer/distributor can change it • after entering your MMSI ID, accessing this menu item will merely display the programmed number To enter or view the MMSI ID number: 1. From DSC MENU, rotate the CH/OK knob until the arrow points to DSC SETUP. 2. Press the CH/OKknob to accept. The DSC SETUP menu items appear. 3. Press CH/OK to select MY MMSI ID. If an existing MMSI ID is stored, the value appears. If the MMSI ID is blank, dashes appear, indicating that one has yet to be entered. The first character space to be modified is highlighted with a flashing underline. 4. Rotate the CH/OK knob. The flashing underline is replaced with a numeric character. Continue rotating the knob to scroll through the selections. 5. When the appropriate number appears, press CH/OK to accept. The next character to be filled in sequence is then underlined. 6. Continue this process until all MMSI characters have been entered. Note: If you accidentally select an incorrect digit, press CLR to move the cursor back to the left. 7. When all digits have been selected, press CH/OK to accept. 8. Press and hold the CH/OK knob.You are prompted to re-enter the MMSI number. 9. Using the CH/OK knob, re-enter all nine MMSI digits to confirm. 10. Press CH/OK to accept your selections. If the second entry does not match the first entry, a warning message is displayed and you are prompted to retry. 11. When complete, press and hold CH/OK to accept. 12. Press CH/OK one last time to SAVE the MMSI ID number and return to the DSC SETUP screen. Note: • You cannot begin the MMSI ID number with “0” (single zero), as this prefix indicates a GROUP ID. • You cannot begin the MMSI ID number with “00” (double zero), as this prefix indicates a COAST STATION. Chapter 5: Digital Selective Calling (DSC) INPUT MY MMSI ID: _-------- INPUT MY MMSI ID: 3 ------- INPUT MY MMSI ID: 3660123456 HOLD [OK] INPUT MY MMSI ID: 3660123456 55 60 5 10 50 15 45 20 40 35 30 25 PROGRAMMING 3660123456 >SAVE CANCEL 72 DSC SETUP >MY MMSI ID AUTO CH CHG POS REPLY 72 72 INPUT MY MMSI ID: 3-------- 72 72 INPUT MY MMSI ID: 3660123456 72 72 RE-ENTER MY MMSI ID: _-------- 72 55 60 5 10 50 15 45 20 40 35 30 25 72 INPUT MY MMSI ID: 3660123456 HOLD [OK] 72 72 DSC SETUP >MY MMSI ID AUTO CH CHG POS REPLY 72 D10237-1 DSC MENU PHONEBOOK >DSC SETUP [BACK] 83 84 Ray49 Marine VHF Radio Automatic Channel Changing for Incoming Calls For incoming Distress and All Ships Urgency Calls, this option determines whether your radio automatically switches to Priority Channel 16 to receive the call or prompts you to manually accept or decline the channel change. The default setting is to ENABLE the auto channel change. If set OFF, the appears on the LCD. icon This feature is useful for preventing your radio from automatically switching channels while you are maintaining a continuous watch on a certain channel (for example, in a VTS controlled area) or working with other vessels (for example, for towage). Note: This feature can disable automatic channel switching for incoming DSC Distress and All Ships Urgency Calls. If enabled, you are responsible for determining whether manually declining the call is appropriate. To enable/disable automatic channel change: 1. From DSC SETUP, rotate the CH/OK knob until the arrow points to AUTO CH CHG. 2. Press the CH/OK knob to accept. 3. Rotate the CH/OK knob until the arrow points to your selection: • If you accept ON (the default), your Ray49 automatically changes to channel 16 when a Distress or All Ships Urgency Call is received. • If you accept OFF, on receipt of a Distress or All Ships Urgency Call you are presented with brief details of the call and advised that a change to channel 16 has been requested. You can either accept the channel change or decline, thereby continuing to monitor your current channel. When set OFF, the icon appears on the LCD. If you accept the request, the call is received, a tone sounds and the radio is changed to channel 16. Pressing any key disables the alarm. If you ignore the call, after 5 minutes the radio declines the call, records the call in the Call Log and maintains normal operation. 4. Press CH/OK to accept. Chapter 5: Digital Selective Calling (DSC) AUTO CH CHG ON >OFF 78 78 AUTO CH CHG >ON OFF DSC SETUP MY MMSI ID >AUTO CH CHG POS REPLY 78 78 D10326-1 DSC SETUP MY MMSI ID >AUTO CH CHG POS REPLY 85 Position Reply This option enables you to determine how your radio responds to a request for your GPS position information (lat/lon) from another station. To enable/disable Position Reply: 1. From DSC SETUP, rotate the CH/OK knob until the arrow points to POS REPLY. 2. Press the CH/OK knob to accept. 3. Rotate the CH/OK knob until the arrow points to your selection: • AUTO sends out your vessel’s position data as soon as it is requested. • MANUAL sends out the data only after you respond to the request. • OFF will not send position data under any circumstances, nor notify you that the request has been made. 4. Press CH/OK to accept. The default setting is MANUAL, which is described in “Position Request“ on page 77. Ray49 Marine VHF Radio DSC SETUP MY MMSI ID AUTO CH CHG >POS REPLY POS REPLY AUTO >MANUAL OFF 68 POS REPLY >AUTO MANUAL OFF 68 68 DSC SETUP MY MMSI ID AUTO CH CHG >POS REPLY 68 D10327-1 86 87 Chapter 6: Customer Service This chapter provides information on service for your Ray49. 6.1 How to Contact Raymarine On the Internet Visit the Raymarine World Wide Web site for the latest information on Raymarine electronic equipment and systems at: www.raymarine.com Customer Support Navigate to the Customer Support page for links for: • • • • • Finding Factory Service locations and Authorized Dealers near you Registering your Raymarine products Accessing handbooks in Adobe Acrobat format Downloading RayTech software updates Accessing the Raymarine solution database Clicking the Find Answers link routes you to our solution database. Search questions and answers by product, category, keywords, or phrases. If the answer you are seeking is not available, click the Ask Raymarine tab to submit your own question to our technical support staff, who will reply to you by e-mail. Product Repair and Service In the unlikely event your Raymarine unit should develop a problem, please contact your authorized Raymarine dealer/distributor for assistance. The dealer is best equipped to handle your service requirements and can offer timesaving help in getting the equipment back into normal operation. In the event that repairs can not be obtained conveniently, product service may also be obtained by returning the unit to: Raymarine, Inc. Product Repair Center 21 Manchester Street Merrimack, NH 03054-4801 88 Ray49 Marine VHF Radio The Product Repair Center is open Monday through Friday 8:15 a.m. to 5:00 p.m. Eastern Time. All products returned to the Repair Center are registered upon receipt. Should you wish to inquire about the repair status of your unit, contact the Product Repair Center at: 603-881-5200 ext. 2118 Please have the product reference number, or unit serial number, ready when you call. We will do everything possible to repair and return your unit quickly. Accessories and Parts Many Raymarine accessory items and parts can be obtained directly from your authorized Raymarine dealer. However, if you are in need of an item not available from the retailer, please contact Raymarine Technical Services at: 603-881-5200 ext. 2333 Please have the Raymarine item or part number ready when calling if placing an order. If you are not sure which item is appropriate for your unit, you should first contact the Technical Support Department to verify your requirements. Technical Support For technical support, call: 603-881-5200 ext. 2444 Our Technical Support Specialists are available to answer questions about installing, operating and trouble-shooting all Raymarine products. Technical Service is available Monday through Friday 8:00 AM to 6:00 PM Eastern Time. Questions can be sent directly to our Technical Support Department via the Internet. Point your browser to www.raymarine.com and click on the Customer Support link. From there, select Find Answers and click the Ask Raymarine tab. 89 Appendix A: Specifications General Mounting Bracket or flush mount Size (H x W x D): Ray49 Flush Mounted Bracket Mounted 2.87 x 6.57 x 6.89in (73 x 167 x 175mm) 3.56 x 7.05 x 6.89in (90.3 x 179 x 175mm) Weight, Ray49: Transceiver & Microphone 2.5 lbs (1.13 kg) Power 12 VDC system (13.6 VDC, typical) Environmental: Operating Range Storage Range Humidity Waterproof to IPX7 –10°C to +50°C –20°C to +70°C up to 95% Frequency Range: Transmit: Receive 156.050 to 157.425 MHz 156.050 to 163.275 MHz Oscillate Mode PLL Modulation FM (16K0G3E) DSC (16K0G2B) Channel Spacing 25 kHz Increments Frequency Stability +/- 10 PPM (+/- 0.001%) Audio Output Power 3.5 watts, typical (at 10% distortion with 4 ohm load), 5 watts peak. Antenna Port Impedance 50 ohms, typical NMEA Port Impedance 100 ohms External Speaker Impedance 4 ohms NMEA IN Sentences supported (NMEA 0183 ver. 3.01): GLL GGA RMA RMC GNS Geographic position, Latitude/Longitude GPS fix data Recommended minimum data for LORAN Recommended minimum data for GPS GNSS fix data NMEA OUT Sentences (NMEA 0183 ver. 3.01): DSC DSE DSC data Extended DSC data 90 Ray49 Marine VHF Radio Transmitter Frequency Error 10 ppm RF Power (at 13.6 VDC): Hi Mode Lo Mode 25 W 1W Maximum Deviation ± 5 KHz FM Hum and Noise Level less than -40 dB below audio level Audio Distortion less than 10% Adjacent Channel Power more than 70 dB Spurious/Harmonic Emissions less than -70 dBc Current Drain: Hi Power at 13.6V DC less than 6 A Receiver Sensitivity @ 12db SINAD 0.28 µV, typical Hum and Noise less than -40 dB below audio level Audio Distortion less than 10% Adjacent Channel Rejection more than 70 dB, typical Intermodulation Rejection Ratio more than 68 dB, typical Spurious Image Rejection more than 70 dB, typical Squelch Sensitivity @ 12db SINAD at tight at threshold less than 1µV, less than 0.28 µV 91 Appendix B: Radio Controls D10114-1 This section is a quick reference to your radio’s controls. Microphone Keys Key Name Press & Release Press & Hold 3 seconds 1. PTT Push-to-Talk Push-to-Talk 2. HI/LO LOC/DIS TX Power High/Low and ACCEPT key for menu item selections Toggles between full receiver sensitivity (Distant mode) and attenuated receiver sensitivity (Local mode). 3. 16/9 Switch between the Priority and Working Channels Switch to Secondary Priority CH (9); If already tuned to secondary channel, program a new secondary Priority Channel. 4. UP/DOWN Channel changing and navigating menu item selections Rapid channel change and navigating menu item selections 5. SCAN/ SAVE SAVE/DELETE channel to/from memory Initiate Priority Saved Scan mode or terminate any active scan. 92 Ray49 Marine VHF Radio Transceiver Controls Key Name Function 6. CH/OK Rotate to change channels or navigate menu items. Press to accept menu item selections. 7. PWR/VOL Power radio ON / OFF and adjust volume level 8. SQ Adjust squelch threshold level Transceiver Push Keys Key Name Press & Release Press & Hold 3 seconds 9. MENU/DSC Activate Menu functions Activate DSC functions 10. CLR/WX Cancel function Weather Channel Mode 11. DW/TRI Activate Dual Watch Activate Tri Watch 12. 16/9 Switch between the Priority and Working Channels Switch to secondary Priority CH (9); If already tuned to secondary channel, program a new secondary Priority Channel. 13. DISTRESS Designate Distress Type Make Distress Call 93 Appendix C: Menu Structure Following is the structure of the menu that appears when the MENU/DSC key is pressed and then immediately released. MENU (continued) MENU D10159-1 VHF OPERATIONS Scan Mode All Scan Priority All Scan Saved Scan Priority Saved Scan HI/LO Power High (25W) Low (1 W) Save Channel Save Clear Watch Mode Dual Watch Tri Watch Frequency Band USA International Canada Channel Name Edit Clear Sensitivity Local Distant (continued in next column) GPS SETUP Manual Position Setting Lat/Lon Time Display Time Offset Time Format COG/SOG NMEA Output On Off SYSTEM CONFIG Backlight Contrast Key Beep Bearing Mode True Magnetic Speed Unit Knots MPH KPH System Test Version Number Reset 94 Ray49 Marine VHF Radio Following is the structure of the menu that appears when the MENU/DSC key is pressed and held for 3 seconds. DSC --------- INDIVIDUAL ---------- Manual call ---------- List of phonebook entries --------- GROUP ---------- Call ---------- My Group ID --------- ALL SHIPS ---------- Urgency ---------- Safety --------- POSITION REQUEST ---------- Manual call ---------- List of phonebook entries --------- RECV'D CALLS ---------- Distress ---------- Call Log ---------- Posit'n Log --------- PHONEBOOK ---------- New entry ---------- List of phonebook entries D9311-3 --------- DSC SETUP ---------- My MMSI ID ---------- Automatic channel change ---------- Position Reply 95 Appendix D: Channel List U.S. Marine VHF Channels and Frequencies CH. XMIT No Freq RCV Freq Single Freq Use 01A 156.050 156.050 Port Operations and Commercial, VTS. Available only in New Orleans / Lower Mississippi area. 1 03A 156.150 156.150 U.S. Government only 05A 156.250 156.250 Port Operations or VTS in the Houston, New Orleans and Seattle areas. 06 156.300 156.300 Intership Safety 07A 156.350 156.350 Commercial 08 156.400 156.400 Commercial (Intership only) 09 156.450 156.450 Boater Calling. Commercial and Non-Commercial. 10 156.500 156.500 Commercial 11 156.550 156.550 Commercial. VTS in selected areas. 12 156.600 156.600 Port Operations. VTS in selected areas. 13 156.650 156.650 Intership Navigation Safety (Bridge-to-bridge). Ships >20meters in length maintain a listening watch on this channel in US waters. 2, 6 14 156.700 156.700 Port Operations. VTS in selected areas. 156.750 Environmental (Receive only). Used by Class ‘C’ EPIRBs. 3 16 156.800 156.800 International Distress, Safety and Calling. Ships required to carry radio, USCG, and most coast stations maintain a listening watch on this channel. 4 17 156.850 156.850 State Control 5 18A 156.900 156.900 Commercial 19A 156.950 156.950 Commercial 15 20 – 157.000 161.600 20A 157.000 157.000 Port Operations (duplex) Port Operations 96 Ray49 Marine VHF Radio CH. XMIT No Freq RCV Freq Single Freq Use 21A 157.050 157.050 U.S. Coast Guard only 22A 157.100 157.100 Coast Guard Liaison and Maritime Safety Information Broadcasts. Broadcasts announced on channel 16. 23A 157.150 157.150 U.S. Coast Guard only 24 157.200 161.800 Public Correspondence (Marine Operator) 25 157.250 161.850 Public Correspondence (Marine Operator) 26 157.300 161.900 Public Correspondence (Marine Operator) 27 157.350 161.950 Public Correspondence (Marine Operator) 28 157.400 162.000 Public Correspondence (Marine Operator) 61A 156.075 156.075 U.S. Government only 63A 156.175 156.175 Port Operations and Commercial, VTS. Available only in New Orleans / Lower Mississippi area. 64A 156.225 156.225 U.S. Coast Guard only 65A 156.275 156.275 Port Operations 66A 156.325 156.325 Port Operations 67 156.375 156.375 Commercial. Used for Bridge-to-bridge communications in lower Mississippi River. Intership only. 6 68 156.425 156.425 Non-Commercial 69 156.475 156.475 Non-Commercial 71 156.575 156.575 Non-Commercial 72 156.625 156.625 Non-Commercial (Intership only) 73 156.675 156.675 Port Operations 74 156.725 156.725 Port Operations 77 156.875 156.875 Port Operations (Intership only) 5 78A 156.925 156.925 Non-Commercial 79A 156.975 156.975 Commercial. Non-Commercial in Great Lakes only. Appendix D: Channel List CH. XMIT No Freq RCV Freq 97 Single Freq Use 80A 157.025 157.025 Commercial. Non-Commercial in Great Lakes only 81A 157.075 157.075 U.S. Government only – Environmental protection operations. 82A 157.125 157.125 U.S. Government only 83A 157.175 157.175 U.S. Coast Guard only 84 157.225 161.825 Public Correspondence (Marine Operator) 85 157.275 161.875 Public Correspondence (Marine Operator) 86 157.325 161.925 Public Correspondence (Marine Operator) 87 157.375 161.975 Public Correspondence Marine Operator) 88 157.425 162.025 Public Correspondence only near Canadian border 88A 157.425 157.425 Commercial, Intership only • Recreational boaters normally use channels listed as Non-Commercial: 68, 69, 71, 72, 78A. • Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular voice communications. • Channels 75 and 76 are reserved as guard bands for Channel 16 and are not available for regular voice communications. Notes: 1. The letter “A” following a channel number indicates simplex use of the ship station transmit side of an international semi-duplex channel. Operations are different from that of international operations on that channel. 2. Channel 13 should be used to contact a ship when there is danger of collision. All ships of length 20 meters or greater are required to guard VHF channel 13, in addition to VHF channel 16, when operating within U.S. territorial waters. 3. Channel is Receive Only. 4. Channel 16 is used for calling other stations or for distress alerting. 5. Output power is fixed at 1 watt only. 6. Output power is initially set to 1 watt. User can temporarily override this restriction to transmit at high power. 98 Ray49 Marine VHF Radio Canadian Marine VHF Channels and Frequencies CH XMIT No. Freq RCV Freq Area of Operation Use 01 156.050 160.650 PC Public Correspondence 02 156.100 160.700 PC Public Correspondence 03 156.150 160.750 PC Public Correspondence 04A 156.200 156.200 PC Intership, Ship/Shore and Safety: Canadian Coast Guard search and rescue1 04A 156.200 156.200 EC Intership, Ship/Shore and Commercial: Commercial fishing only 05A 156.250 156.250 Ship Movement 06 Intership, Commercial, Non-commercial and Safety: May be used for search and rescue communications between ships and aircraft. 156.300 156.300 All areas 07A 156.350 156.350 All areas Intership, Ship/Shore, Commercial 08 156.400 156.400 WC, EC Intership, Commercial and Safety: Also assigned for operations in the Lake Winnipeg area. 09 156.450 156.450 AC Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: May be used to communicate with aircraft and helicopters in predominantly maritime support operations. 10 156.500 156.500 AC, GL Intership, Ship/Shore, Commercial, Non-commercial, Safety and Ship Movement: May also be used for communications with aircraft engaged in coordinated search and rescue and antipollution operations. 11 156.550 156.550 PC, AC, GL Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: Also used for pilotage purposes. 12 156.600 156.600 WC, AC, GL Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: Port operations and pilot information and messages. 13 156.650 156.650 All areas Intership, Commercial, Non-commercial and Ship Movement: Exclusively for bridge-to-bridge navigational traffic. Limited to 1-watt maximum power. Appendix D: Channel List CH XMIT No. Freq RCV Freq 99 Area of Operation Use 14 156.700 156.700 AC, GL Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: Port operations and pilot information and messages. 15 156.750 156.750 All areas Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: All operations limited to 1-watt maximum power. May also be used for on-board communications. 16 156.800 156.800 All areas International Distress, Safety and Calling2 17 156.850 156.850 All areas Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement: All operations limited to 1-watt maximum power. May also be used for on-board communications. 18A 156.900 156.900 All areas Intership, Ship/Shore and Commercial: Towing on the Pacific Coast. 19A 156.950 156.950 All areas except PC Intership and Ship/Shore: Canadian Coast Guard only. 19A 156.950 156.950 PC Intership and Ship/Shore: Various Government departments. 20 Ship/Shore, Safety and Ship Movement: Port operations only with 1-watt maximum power. 157.000 161.600 All areas 21A 157.050 157.050 All areas Intership and Ship/Shore: Canadian Coast Guard only. 21B 161.650 All areas Safety: Continuous Marine Broadcast (CMB) service.3 22A 157.100 157.100 All areas Intership, Ship/Shore, Commercial and Non-commercial: For communications between Canadian Coast Guard and non-Canadian Coast Guard stations only. 23 157.150 161.750 PC Ship/Shore and Public Correspondence: Also in the inland waters of British Columbia and the Yukon. 24 157.200 161.800 All areas Ship/Shore and Public Correspondence 25 157.250 161.850 PC Ship/Shore and Public Correspondence: Also assigned for operations in the Lake Winnipeg area. 25B 26 161.850 AC 157.300 161.900 All areas Safety: Continuous Marine Broadcast (CMB) service. Ship/Shore, Safety and Public Correspondence 100 Ray49 Marine VHF Radio CH XMIT No. Freq RCV Freq Area of Operation Use 27 157.350 161.950 AC, GL, PC Ship/Shore and Public Correspondence 28 157.400 162.000 PC Ship/Shore, Safety and Public Correspondence 28B 60 162.000 AC 156.025 160.625 PC Safety: Continuous Marine Broadcast (CMB) service. Ship/Shore and Public Correspondence 61A 156.075 156.075 PC Intership and Ship/Shore: Canadian Coast Guard only. 61A 156.075 156.075 EC Intership, Ship/Shore and Commercial: Commercial fishing only. 62A Intership and Ship/Shore: Canadian Coast Guard only. 156.125 156.125 PC 62A 156.125 156.125 EC Intership, Ship/Shore and Commercial: Commercial fishing only. 64 Ship/Shore and Public Correspondence 156.225 160.825 PC 64A 156.225 156.225 EC Intership, Ship/Shore and Commercial: Commercial fishing only. 65A 156.275 156.275 Intership, Ship/Shore, Commercial, Non-commercial, Safety: Search & rescue and antipollution operations on the Great Lakes. Towing on the Pacific Coast. Port operations only in the St. Lawrence River areas with 1W maximum power. Pleasure craft in the inland waters of Alberta, Saskatchewan and Manitoba (excluding Lake Winnipeg and the Red River). 66A 156.325 156.325 Intership, Ship/Shore, Commercial, Non-commercial, Safety and Ship Movement: Port operations only in the St.Lawrence River/Great Lakes Areas with 1-watt maximum power. 67 156.375 156.375 EC Intership, Ship/Shore and Commercial: Commercial fishing only. 67 156.375 156.375 All areas except EC Intership, Ship/Shore, Commercial, Non-commercial, Safety: May also be used for communications with aircraft engaged in coordinated search and rescue and antipollution operations. Appendix D: Channel List CH XMIT No. Freq RCV Freq 101 Area of Operation Use 68 156.425 156.425 All areas Intership, Ship/Shore and Non-commercial: For marinas and yacht clubs. 69 156.475 156.475 All areas except EC Intership, Ship/Shore, Commercial and Non-commercial 69 156.475 156.475 EC Intership, Ship/Shore and Commercial: Commercial fishing only. 71 156.575 156.575 PC Intership, Ship/Shore, Commercial, Non-commercial, Safety and Ship Movement 71 156.575 156.575 Intership, Ship/Shore and Non-commercial: For marinas and yacht clubs on the East Coast and on Lake Winnipeg. 72 156.625 156.625 EC, PC Intership, Commercial and Non-commercial: May be used to communicate with aircraft and helicopters in predominantly maritime support operations. 73 156.675 156.675 EC Intership, Ship/Shore and Commercial: Commercial fishing only 73 156.675 156.675 All areas except EC Intership, Ship/Shore, Commercial, Non-commercial, Safety: May also be used for communications with aircraft engaged in coordinated search and rescue and antipollution operations. 74 156.725 156.725 EC, PC Intership, Ship/Shore, Commercial, Non-commercial and Ship Movement. 77 156.875 156.875 Intership, Ship/Shore, Safety and Ship Movement: Pilotage on Pacific Coast. Port operations only in the St. Lawrence River/Great Lakes areas with 1W maximum power. 78A 156.925 156.925 EC, PC Intership, Ship/Shore and Commercial 79A 156.975 156.975 EC, PC Intership, Ship/Shore and Commercial 80A 157.025 157.025 EC, PC Intership, Ship/Shore and Commercial 81A 157.075 157.075 Intership and Ship/Shore: Canadian Coast Guard use only in the St. Lawrence River/Great Lakes areas. 81A 157.075 157.075 PC Intership, Ship/Shore and Safety: Canadian Coast Guard antipollution. 102 Ray49 Marine VHF Radio CH XMIT No. Freq RCV Freq Area of Operation Use 82A 157.125 157.125 PC Intership, Ship/Shore and Safety: Canadian Coast Guard use only. 82A 157.125 157.125 Intership and Ship/Shore: Canadian Coast Guard use only in the St. Lawrence River/Great Lakes areas. 83 Ship/Shore and Safety: Canadian Coast Guard use only. 157.175 161.775 PC 83A 157.175 157.175 EC Intership and Ship/Shore: Canadian Coast Guard and other Government agencies. 83B Safety: Continuous Marine Broadcast (CMB) Service. 161.775 AC, GL 84 157.225 161.825 PC Ship/Shore and Public Correspondence 85 157.275 161.875 AC, GL, NL Ship/Shore and Public Correspondence 86 157.325 Ship/Shore and Public Correspondence 87 157.375 161.975 AC, GL, NL Ship/Shore and Public Correspondence 88 157.425 162.025 AC, GL, NL Ship/Shore and Public Correspondence 161.925 PC Area of Operation AC: Atlantic Coast, Gulf and St. Lawrence River up to and including Montreal EC (East Coast): includes NL, AC, GL and Eastern Arctic areas GL: Great Lakes (including St. Lawrence above Montreal) NL: Newfoundland and Labrador PC: Pacific Coast WC (West Coast): Pacific Coast, Western Arctic and Athabasca-Mackenzie Watershed areas All areas: includes East and West Coast areas Notes: 1. An “A” following a channel number indicates simplex use of the ship station transmit side of an international duplex channel. Operations are different from that of international operations on that channel. 2. Channel 16 is used for calling other stations or for distress alerting. 3. The letter “B” following a channel number indicates simplex use of the coast station transmit side of an international duplex channel. That is, the channel is Receive Only. 4. Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular voice communications. 5. Channels 75 and 76 are reserved as guard bands for Channel 16 and are not available for regular voice communications. Appendix D: Channel List 103 International Marine VHF Channels & Frequencies CH XMIT No. Freq RCV Freq Single Freq Use 01 156.050 160.650 Public Correspondence, Port Operations and Ship Movement 02 156.100 160.700 Public Correspondence, Port Operations and Ship Movement 03 156.150 160.750 Public Correspondence, Port Operations and Ship Movement 04 156.200 160.800 Public Correspondence, Port Operations and Ship Movement 05 156.250 160.850 Public Correspondence, Port Operations and Ship Movement 06 156.300 156.300 07 156.350 160.950 08 156.400 156.400 Intership 09 156.450 156.450 Intership, Port Operations and Ship Movement 10 156.500 156.500 Intership, Port Operations and Ship Movement 2 11 156.550 156.550 Port Operations and Ship Movement 12 156.600 156.600 Port Operations and Ship Movement 13 156.650 156.650 Intership Safety, Port Operations and Ship Movement 3 14 156.700 156.700 Port Operations and Ship Movement 15 156.750 156.750 Intership and On-board Communications at 1W only 4 16 156.800 156.800 Distress, Safety and Calling 17 156.850 156.850 Intership and On-board Communications at 1W only 4 18 156.900 161.500 Public Correspondence, Port Operations and Ship Movement 19 156.950 161.550 Public Correspondence, Port Operations and Ship Movement 20 157.000 161.600 Public Correspondence, Port Operations and Ship Movement 21 157.050 161.650 Public Correspondence, Port Operations and Ship Movement 22 157.100 161.700 Public Correspondence, Port Operations and Ship Movement 23 157.150 161.750 Public Correspondence, Port Operations and Ship Movement 24 157.200 161.800 Public Correspondence, Port Operations and Ship Movement Intership 1 Public Correspondence, Port Operations and Ship Movement 104 Ray49 Marine VHF Radio CH XMIT No. Freq RCV Freq Single Freq Use 25 157.250 161.850 Public Correspondence, Port Operations and Ship Movement 26 157.300 161.900 Public Correspondence, Port Operations and Ship Movement 27 157.350 161.950 Public Correspondence, Port Operations and Ship Movement 28 157.400 162.000 Public Correspondence, Port Operations and Ship Movement 60 156.025 160.625 Public Correspondence, Port Operations and Ship Movement 61 156.075 160.675 Public Correspondence, Port Operations and Ship Movement 62 156.125 160.725 Public Correspondence, Port Operations and Ship Movement 63 156.175 160.775 Public Correspondence, Port Operations and Ship Movement 64 156.225 160.825 Public Correspondence, Port Operations and Ship Movement 65 156.275 160.875 Public Correspondence, Port Operations and Ship Movement 66 156.325 160.925 Public Correspondence, Port Operations and Ship Movement 67 156.375 156.375 Intership, Port Operations and Ship Movement 2 68 156.425 156.425 Port Operations and Ship Movement 69 156.475 156.475 Intership, Port Operations and Ship Movement 71 156.575 156.575 Port Operations and Ship Movement 72 156.625 156.625 Intership 73 156.675 156.675 Intership 2 74 156.725 156.725 Port operations and Ship movement 75 156.775 156.775 See Note 5 76 156.825 156.825 See Note 5 77 156.875 156.875 Intership 78 156.925 161.525 Public correspondence, Port Operations and Ship Movement 79 156.975 161.575 Public correspondence, Port Operations and Ship Movement 80 157.025 161.625 Public correspondence, Port Operations and Ship Movement 81 157.075 161.675 Public correspondence, Port Operations and Ship Movement Appendix D: Channel List CH XMIT No. Freq RCV Freq 105 Single Freq Use 82 157.125 161.725 Public correspondence, Port Operations and Ship Movement 83 157.175 161.775 Public correspondence, Port Operations and Ship Movement 84 157.225 161.825 Public correspondence, Port Operations and Ship Movement 85 157.275 161.875 Public correspondence, Port Operations and Ship Movement 86 157.325 161.925 Public correspondence, Port Operations and Ship Movement 87 157.375 157.375 Port Operations and Ship Movement 88 157.425 157.425 Port Operations and Ship Movement • • Intership channels are for communications between ship stations. Intership communications should be restricted to Channels 6, 8, 72 and 77. If these are not available, the other channels marked for Intership may be used. Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular voice communications. Notes: 1. Channel 06 may also be used for communications between ship stations and aircraft engaged in coordinated search and rescue operations. Ship stations should avoid harmful interference to such communications on channel 06 as well as to communications between aircraft stations, ice breakers and assisted ships during ice seasons. 2. Within the European Maritime Area and in Canada, channels 10, 67 and 73 may also be used by the individual administrations concerned for communication between ship stations, aircraft stations and participating land stations engaged in coordinated search and rescue and anti-pollution operations in local areas. Channels 10 or 73 (depending on location) are also used for the broadcast of Marine Safety Information by the Maritime and Coast Guard Agency in the UK only. 3. Channel 13 is designated for use on a worldwide basis as a navigation safety communication channel, primarily for intership navigation safety communications. 4. Channels 15 and 17 may also be used for on-board communications provided the effective radiated power does not exceed 1 Watt. 5. The use of Channels 75 and 76 should be restricted to navigation related communication only and all precautions should be taken to avoid harmful interference to channel 16. Transmit power is limited to 1 Watt. 106 Ray49 Marine VHF Radio WX Channels (North America only) Weather Channel Frequency in MHz WX 1 162.550 WX 2 162.400 WX 3 162.475 WX 4 162.425 WX 5 162.450 WX 6 162.500 WX 7 162.525 WX 8 161.650 WX 9 161.775 WX 10 163.275 107 Appendix E: Glossary Term Meaning All Scan A feature that scans all channels in the channel set. All Ships Call A DSC call that sends out a message to all vessels within range. The Ray49 can make two different types of All Ships calls: Safety Calls for advisory alerts or Urgency Calls when assistance is required but there is no imminent danger to the vessel. Canadian Channels Channel designations as defined by Industry Canada. CH Channel selection key COG Course Over Ground Distress Call A DSC call notifying other ships and shore stations that your vessel is in imminent danger, sending your position and time information, along with (optionally) the nature of your distress situation. DSC Digital Selective Calling (DSC) is a system used to send digital messages to stations identified by a unique MMSI number. Contained within the message is the working channel on which voice communications are to be made. DSC enables you to make digital Distress Calls and to specify the stations that you wish to contact: an Individual station, all stations within a specified Group, or All Ship stations within range. Dual Watch A feature that monitors the Priority Channel 16 and one other channel that you choose. FCC Federal Communications Commission (US) Global Positioning System A navigational system that uses satellite signals to determine the latitude and longitude of a receiver on Earth. GPS Global Positioning System Group Call A DSC call that sends transmissions only received by radios sharing a common Group MMSI number, such as a flotilla or racing fleet. Individual Call A DSC Call made to a specific station identified by its MMSI number. International Channels Channel designations as defined by the ITU ITU International Telecommunications Union (EU) 108 Ray49 Marine VHF Radio Term Meaning MMSI Maritime Mobile Service Identity; a number issued by each country to identify maritime stations, much like a telephone number. NOAA National Oceanographic and Atmospheric Administration (US) Position Request A DSC call requesting GPS position information from any station for which an MMSI number is known. You can also send out your position to other stations. Priority Channel Channel 16 or 9 Priority Scan A feature that alternates monitoring the Priority Channel 16 with each of the regular channels. PTT switch Microphone push-to-talk switch RF Radio Frequency RX Receive SAR Search And Rescue Saved Scan Scans only user-selected memory channels Semi-duplex Channels using separate frequencies to transmit and receive. Simplex Channels transmitting and receiving on the same frequency. SOG Speed Over Ground Squelch A circuit that sets the threshold for cutting off the receiver when the signal is too weak for reception of anything but noise. TX Transmit Tri Watch A function that monitors the Priority Channel (16), the Secondary Priority Channel, and one other channel that you choose. USA Channels Channel designations as defined by the FCC VOL Volume key VHF Very High Frequency (30MHz to 300MHz) Weather (WX) Channels Channels for routine and emergency weather information broadcast by NOAA (USA) WX Weather Band key Working Channel The currently-selected (non-priority, non-WX) channel 109 Index Numerics 16/9 key 23, 25 Accessories 88 Adding channels to memory 42 All Scan function 38 All Ships Calls 74 Receiving 74 Transmitting 74 ATIS indicator 28 Automatic Channel Changing 26, 84 Backlight adjustment 51 Bearing Mode 53 Cable connections 19 Canadian channels 27, 98 Channel Knob 24 Name 45 Tuning 28 UP/DOWN key 24 Channel List 95 Canadian frequencies 98 International frequencies 103 US frequencies 95 WX frequencies 106 CLR/WX key 25 Coast Stations 66 COG/SOG Display 50 Connections cable 19 external speaker 20 GPS 20 NMEA 20 power 20 Contrast adjustment 52 Conventions 9 Customer Support 87 Deleting channels from memory 42 Display 25 Distress Calls 59 key 25 Receiving 62 Receiving Distress Relay 63 Sending a Designated call 60 Sending an Undesignated (QUICK) call 59 DSC 57 All Ships Calls 74 Call icon 26 Distress Calls 59 Group Calls 70 Individual Calls 66 key 35 Log 79 Options 81 Menu 24, 57 Phonebook 64 DSC Settings Automatic Channel Changing 84 Group MMSI Setup 70 My MMSI ID 81 Position Reply 85 Dual Watch 25, 44 External speaker 20 Features 13 Frequency Band 45 Canadian channels 98 International channels 103 US channels 95 WX channels 106 Glossary 107 GPS indicator 26 Installing 20 Position Reply 85 setup 47 110 Group Calls 70 Receiving 73 Transmitting 71 Group MMSI Setup 70 Handset 23, 91 Help from Raymarine 87 HI/LO indicator 27 key 23 power selection 40 High Voltage 20 Individual Calls 66 Receiving 69 Transmitting 67 Installation 15 International channels 27, 103 Invalid Channel 69, 73, 76 Key Beep 53 Keypad 91 Keys 23 Last Received Position Request 78 Latitude/Longitude Display 50 LCD display 25 Local Mode 26, 47 Log 79 Options 81 Low Voltage 20 Memory Adding channels to 42 Menu 24, 35 DSC Setup 81 GPS/Time Setup 47 Phonebook 64 Adding entries 64 Deleting entries 66 Editing entries 66 Settings 49 Ray49 Marine VHF Radio MENU/DSC key 24, 35, 57 Messages 79 Microphone 23, 35, 58, 91 MMSI 81 Monitor Mode Dual Watch 44 Tri Watch 44 My MMSI ID 81 NMEA connections 20 NMEA Out 51 Override low power restriction 32, 41 Phonebook 64 Adding entries 64 Deleting entries 66 Editing entries 66 PLUS channel 30 Position Reply 85 Position Request 77 from Phonebook 77 receiving from another station 78 retrieving last received 78 Power 24 connections 20 ON/OFF 28 selection 40 Priority Channel 30 Priority Saved Scan function 40 Priority Scan function 39 PTT key 23, 32 PWR/VOL key 24 Radio Setup Channel Name 45 Frequency Band 45 Sensitivity 47 Raymarine Addresses 87 Phone numbers 87 Web site 87 Received Calls 79 111 Removing the sun cover 15 Repair 87 Reset 55 RX indicator 26 Save 24 SAVED indicator 26 Saved Scan function 39 Scan Mode 37 All Scan 38 Priority All Scan 39 Priority Saved Scan 40 Saved Scan 39 SCAN/SAVE key 24 Secondary Priority (PLUS) Channel 30 Sensitivity 47 Service 87 Settings 49, 81 COG/SOG Display 50 Latitude/Longitude Display 50 Time Display 50 Time Format 50 Time Offset 50 Speaker 20 Specifications 89 Speed Unit 54 Squelch 24, 28 Standard equipment 16, 19 Sun cover removal 15 System Configuration 51 Backlight 51 Bearing Mode 53 Contrast 52 Key Beep 53 Reset 55 Speed Unit 54 System Test 54 Version Number 55 System Test 54 Technical Support 88 Time Display 50 Format 50 Offset 50 Setup 47 Transmitting 32 Override 32, 41 Tri Watch 25, 44 TX 26, 32 Unable to Comply 69, 73, 76 US channels 27, 95 UTC time setup 47 Version Number 55 Voltage 20 Volume 24, 28 Warranty 9 Weather Alert 26, 27, 29 Weather channels 29, 106 Web site 87 Wire connections 19 WX 29, 106 112 Ray49 Marine VHF Radio
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 56 Producer : AFPL Ghostscript 8.14 Create Date : 2007:06:09 16:10:05 Modify Date : 2007:06:09 16:10:05 Title : 81296_1www.pdf Creator : PDFCreator Version 0.8.0 Author : tom.twynam Subject :EXIF Metadata provided by EXIF.tools