Flow Btm Power Grippers 100 Series 1507232577 User Manual
Btm Power Grippers 100 Series-1507232577 BTM_POWER_GRIPPERS_100_SERIES-1507232577
Btm Power Grippers 100 Series BTM POWER GRIPPERS 100 SERIES BTM POWER GRIPPERS 100 SERIES Grippers Actuator & Cylinders client_assets assets-flotronics
2017-10-06
User Manual: Flow Btm Power Grippers 100 Series-1507232577
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Catalog ID # 733657C 100 Series CLAMPS & GRIPPERS CATALOG Standard 25mm bore light duty clamps, grippers, and pin clamps 360° manually rotatable head for MOST models Common mounting pattern for all models Designed for high production Part of BTM’s Products for Automation http://www.btmcomp.com/products.html www.btmcomp.com 810-364-4567 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS SAFETY NOTE It is the customer and/or user’s responsibility to provide proper safety controls and/or guarding when a pinch point is present. REDUCE COST FEATURES Compact, light weight, light-duty clamps & grippers. Designed for high-production. Reduce your fixturing costs by eliminating angled mounting surfaces. 25mm bore pneumatic cylinders Common mounting pattern for all models Position-sensing switch option available THIS NOT THIS MANUALLY POSITIONABLE HEAD Except for the Rotary-Linear Clamp, and the Pin Clamp, BTM’s 100 series clamps & grippers are OMNI style and feature a manually positionable 360° rotating head. Simplify off-center mounting by rotating the head to the desired position and mounting the body squarely. The head is locked into place when the mounting screws are tightened. BTM’S STANDARD 100 SERIES CLAMP & GRIPPER LINE 180° Gripper Vertical Clamp Rotary-Linear Clamp Parallel Gripper ! 2 Horizontal Clamp 40° Gripper 20° Gripper Linear Clamp Pin Clamp BTM reserves the right to make changes to its literature without any prior notice. Go to www.btmcomp.com for latest version. BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS TABLE OF CONTENTS GRIPPERS CLAMPS 20° SINGLE OPENING GRIPPER ................... 4 VERTICAL CLAMP ............................................ 8 20° 130° 40° DOUBLE OPENING GRIPPER ................ 5 40° HORIZONTAL CLAMP ....................................... 9 110° 180° GRIPPER .................................................. 6 LINEAR CLAMP .............................................. 10 180° 30.5mm [1.2”] Linear Clamping PARALLEL GRIPPER ....................................... 7 ROTARY-LINEAR CLAMP ................................ 11 90° 17.5mm [.69”] Rotates to Linear Clamping PIN CLAMP PLC25 ....................................................... 12-13 SWITCH INFORMATION ......................................... 14 WARRANTY INFORMATION ................................. BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 15 3 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS 20° SINGLE OPENING GRIPPER Bore Ø 25.4 [1.00in] Stroke 6.6 [0.26in] Total Arm Opening 20° Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.34 kg [.75 lbs] Closed Open -- Use Flow Control to Reduce Impact -- POUNDS NEWTONS Clamping Force 2X 821.6 x Line Pressure (BAR) 4X 4.8 [.19] THRU FOR MOUNTING 3.20 [.126] 6.4 [.25] NEAR AND FAR SIDE Length (mm) from POINT “A” to the center line of gripping contact area on gripper arm .50 x Line Pressure (PSI) 9.53 [.375] 23.88 [.940] Length (in) from POINT “A” to the center line of gripping contact area on gripper arm 22.1 [.87] GRIPPER CLOSE #10-32 UNF PORT PIVOT POINT "A" 128.5 [5.06] 90.9 [3.58] GRIPPER OPEN #10-32 UNF PORT 11.2 [.44] 9.53 [.375] MOVEABLE ARM 10.26 [.400] 9.7 [.38] 31.8 [1.25] SQUARE 30.2 [1.19] 20° 10.9 [.43] 16.0 [.63] 9.7 [.38] 75.2 [2.96] 48.5 [1.91] 46.7 [1.84] FIXED ARM 360 AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION OPEN POSITION SENSOR 12.2 [.48] 9.4 [.37] CLOSED POSITION SENSOR 4.8 [.19] 12.2 [.48] Efector DC (MPEDC) HOW TO ORDER 18.0 [.71] ARM OPENING SERIES GRIPPER SELECTION SENSING 12.2 [.71] [.48] 18.0 PGO Power Gripper OMNI - 100 100 Series - S20 S20 = Single 20° Opening - MPEDC Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 12.2 [.48] 12.2 [.48] 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch 4 BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS 40° DOUBLE OPENING GRIPPER Bore Ø 25.4 [1.00in] Stroke 6.6 [0.26in] Total Arm Opening 40° Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.34 kg [0.75 lbs] Closed Open -- Use Flow Control to Reduce Impact -- POUNDS NEWTONS Clamping Force 2X Ø 3.20 [.126] 6.4 [.25] NEAR AND FAR SIDE 4X Ø 4.8 [.19] THRU FOR MOUNTING 821.6 x Line Pressure (BAR) Length (mm) from POINT “A” to the center line of gripping contact area on gripper arm .50 x Line Pressure (PSI) 9.53 [.375] 23.88 [.940] Length (in) from POINT “A” to the center line of gripping contact area on gripper arm GRIPPER CLOSE #10-32 UNF PORT 22.1 [.87] 128.5 [5.06] 90.9 [3.58] GRIPPER OPEN #10-32 UNF PORT 11.2 [.44] 9.53 [.375] PIVOT POINTS "A" 30.2 [1.19] 10.16 [.400] 9.7 [.38] 31.8 [1.25] SQUARE 10.7 [.42] 40° 16.0 [.63] 9.7 [.38] 75.2 [2.96] 10.16 [.400] 48.5 [1.91] 46.5 [1.83] 360º AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION OPEN POSITION SENSOR 12.2 [.48] 9.4 [.37] 4.8 [.19] 12.2 [.48] CLOSED POSITION SENSOR Efector DC (MPEDC) HOW TO ORDER 18.0 [.71] ARM OPENING SERIES GRIPPER SELECTION SENSING 12.2 [.71] [.48] 18.0 PGO Power Gripper OMNI - 100 100 Series - D40 D40 = Double 40° Opening - MPEDC Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 12.2 [.48] 12.2 [.48] 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 5 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS 180°GRIPPER Bore Ø 25.4 [1.00in] Stroke 24.1 [0.95in] Total Arm Opening 180° Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.54 kg [1.2 lbs] Closed Open -- Use Flow Control to Reduce Impact -- NEWTONS POUNDS 19.1 [.75] 2X Ø 3.20 [.126] 6.3 [.25] NEAR AND FAR SIDE 4X Ø 4.8 [.19] THRU FOR MOUNTING Clamping Force 12.7 [.50] 6.4 [.25] 821.6 x Line Pressure (BAR) 18.8 [.74] Length (mm) from POINT “A” to the center line of gripping contact area on gripper arm 23.88 [.940] .50 x Line Pressure (PSI) 9.53 [.375] Length (in) from POINT “A” to the center line of gripping contact area on gripper arm 75.2 [2.96] 22.1 [.87] GRIPPER OPEN #10-32 UNF PORT GRIPPER CLOSE #10-32 UNF PORT 11.2 [.44] 4X Ø 4.3 [.17] THRU 9.53 [.375] 62.0 [2.44] 85.6 [3.37] 24.77 [.975] 56.1 [2.21] 6.4 [.25] 16.8 [.66] 31.8 [1.25] SQUARE 180° 23.9 32 ARM [.94] [1.26] OPENING 16 [.63] 4X 6-32 UNC -2B TAP 7.87 [.31] 12.40 [.488] 119.1 [4.69] OPEN 180° 19.05 [.750] 9.53 [.375] 10.7 [.42] 160.8 [6.33] 38.1 [1.50] 37.1 [1.46] 47.8 [1.88] 360° AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION CLOSED POSITION SENSOR OPEN POSITION SENSOR Efector DC (MPEDC) HOW TO ORDER ARM OPENING SERIES GRIPPER SELECTION SENSING 18.0 [.71] 12.2 [.71] [.48] 18.0 PGO Power Gripper OMNI - 100 100 Series - D180 D180 = Double 180° Opening - MPEDC 12.2 [.48] 12.2 [.48] Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch 6 BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS PARALLEL GRIPPER Bore Ø 25.4 [1.00in] Stroke 21.8 [0.86in] Total Arm Opening 17.5 [0.69in] Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.64 kg [1.4 lbs] Closed Open -- Use Flow Control to Reduce Impact -Clamping Force NEWTONS 20 x Line Pressure (BAR) POUNDS .31 x Line Pressure (PSI) 2X Ø 3.20 [.126] 6.4 [.25] NEAR AND FAR SIDE 4X Ø 4.8 [.19] THRU FOR MOUNTING 113.3 [4.46] 33.3 [1.31] 19.1 [.75] 9.53 [.375] 23.88 [.940] 22.1 [.87] 75.2 [2.96] GRIPPER OPEN #10-32 UNF PORT GRIPPER CLOSE #10-32 UNF PORT 11.2 [.44] 5X 8-32 UNC -2B TAP THRU ALL 9.53 [.375] 10.01 [.394] TYP (4) 67.82 [2.670] 16.8 [.66] 56.1 [2.21] 6.4 [.25] TYP. 89.7 72.1 [2.84] [3.53] CLOSED OPEN 31.8 [1.25] SQUARE 16.0 [.63] 51.1 [2.01] MIN. CLOSED 68.6 [2.70] MAX. OPEN 68.6 [2.70] 61.0 [2.40] 31.8 [1.25] 188.2 [7.41] 360° AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION CLOSED POSITION SENSOR OPEN POSITION SENSOR Efector DC (MPEDC) HOW TO ORDER OPG OMNI Parallel Gripper ARM OPENING SERIES GRIPPER SELECTION - 100 100 Series - 17.5mm 17.5mm = Total Arm Opening SENSING - MPEDC Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 18.0 [.71] 12.2 [.71] [.48] 18.0 12.2 [.48] 12.2 [.48] 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 7 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS 130° VERTICAL CLAMP Bore Ø 25.4 [1.00in] Stroke 29.2 [1.15in] Total Arm Opening 130° Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.34 kg [0.75 lbs] Closed Open -- Use Flow Control to Reduce Impact -2X Ø 3.2 [.126] 6.4 [.25] NEAR AND FAR SIDE POUNDS NEWTONS Clamping Force 4X Ø 4.8 [.19] THRU FOR MOUNTING 821.6 x Line Pressure (BAR) Length (mm) from POINT “A” to the center line of gripping contact area on gripper arm 23.88 [.940] 0.50 x Line Pressure (PSI) 9.53 [.375] Length (in) from POINT “A” to the center line of gripping contact area on gripper arm CLAMP CLOSE #10-32 UNF PORT 22.1 [.87] 11.2 [.44] 9.53 [.375] 128.5 [5.06] CLAMP OPEN #10-32 UNF PORT Ø30.2 [1.19] 90.9 [3.58] 31.8 [1.25] SQUARE 10.16 [.400] 130° 16.0 [.63] 36.96 [1.455] 75.2 [2.96] 40.4 [1.59] OPEN POSITION SENSOR CLOSED POSITION SENSOR 12.2 [.48] 79.3 [3.12] 4.8 [.19] CENT PIVOT POINT "A" 37.9 47.5 [1.49] [1.87] 9.1 [.36] CENT. 12.7 [.50] 12.2 [.48] 360° AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION Efector DC (MPEDC) HOW TO ORDER PCO ARM OPENING SERIES GRIPPER SELECTION - 100 - V130 SENSING - MPEDC 18.0 [.71] 12.2 [.71] [.48] 18.0 12.2 [.48] Power Clamp OMNI 100 Series V130 = Vertical 130° Opening Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) NS = No Switch 8 12.2 [.48] 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS 110° HORIZONTAL CLAMP Bore Ø 25.4 [1.00in] Stroke 25.9 [1.02in] Total Arm Opening 180° Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.30 kg [0.671 lbs] Closed Open -- Use Flow Control to Reduce Impact -2X Ø 3.20 [.126] 6.4 [.25] NEAR AND FAR SIDE POUNDS NEWTONS Clamping Force 4X Ø 4.8 [.19] THRU FOR MOUNTING 4.8 [.19] CENT. 821.6 x Line Pressure (BAR) 9.1 [.36] CENT. Length (mm) from POINT “A” to the center line of gripping contact area on gripper arm 23.88 [.940] 0.50 x Line Pressure (PSI) 9.53 [.375] 9.53 [.375] 95.0 [3.74] Length (in) from POINT “A” to the center line of gripping contact area on gripper arm 41.7 [1.64] 128.5 [5.06] CLAMP CLOSE #10-32 UNF PORT 22.1 [.87] 11.2 [.44] CLAMP OPEN #10-32 UNF PORT 31.8 [1.25] SQUARE 110° 90.9 [3.58] 16.0 [.63] Ø30.2 [1.19] 9.7 [.38] 75.2 [2.96] OPEN POSITION SENSOR CLOSED POSITION SENSOR 36.96 [1.455] 15.0 [.59] 10.16 [.400] PIVOT POINT "A" 12.2 [.48] 360° AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION Efector DC (MPEDC) 12.2 [.48] HOW TO ORDER ARM OPENING SERIES GRIPPER SELECTION SENSING 18.0 [.71] 12.2 [.71] [.48] 18.0 PCO Power Clamp OMNI - 100 100 Series - H110 H110 = Horizontal 110° Opening - MPEDC 12.2 [.48] 12.2 [.48] Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 9 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS LINEAR CLAMP Bore Ø 25.4 [1.00in] Stroke 29.2 [1.15in] Total Arm Opening 29.2 [1.15in] Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.30 kg [0.659 lbs] -- Use Flow Control to Reduce Impact -- 2X Ø 3.20 [.126] 6.4 [.25] NEAR AND FAR SIDE Clamping Force NEWTONS 42 x Line Pressure (BAR) POUNDS 0.65 x Line Pressure (PSI) 23.88 [.940] Open Closed 4X Ø 4.8 [.19] THRU FOR MOUNTING 9.53 [.375] 9.53 [.375] 29.2 [1.15] STROKE 23.4 [.92] 22.1 [.87] CLAMP OPEN #10-32 UNF PORT 9.7 [.38] CLAMP CLOSE #10-32 UNF PORT 11.2 [.44] 31.8 [1.25] SQUARE 4.8 [.19] CENT. Ø 30.2 [1.19] 9.4 [.37] CENT. 36.8 [1.45] 52.6 [2.07] 16.0 [.63] 75.2 [2.96] 90.9 [3.58] 128.5 [5.06] 137.2 [5.40] CLOSED POSITION SENSOR OPEN POSITION SENSOR 12.2 [.48] Efector DC (MPEDC) 12.2 [.48] HOW TO ORDER 18.0 [.71] ARM OPENING SERIES GRIPPER SELECTION 360° AVAILABLE ROTATION (OMNI HEAD AND ARM) FRONT MOUNTING SCREWS LOCK THE OMNI HEAD IN POSITION SENSING 12.2 [.71] [.48] 18.0 12.2 [.48] PCO - 100 - SL1.2 - MPEDC 12.2 [.48] 12.2 [.48] Power Clamp OMNI 100 Series SL1.2 = 29.2 [1.15in] Linear Arm Opening Sensing Option (See p.14 for more info.) MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch 10 BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS ROTARY-LINEAR CLAMP Bore Ø 25.4 [1.00in] Stroke 25.9 [1.02in] Total Arm Opening 25.91 [1.02in] Total Stroke Consists of: • 7.87 [0.31in] - 90° rotation • 18.03 [0.71in] linear travel Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] Approximate Weight 0.35 kg [0.769 lbs] Closed Clamping Force -- Use Flow Control to Reduce Impact -- CLAMP OPEN 10-32 UNF PORT 12.2 [.48] 12.2 [.48] 31.8 [1.25] SQUARE NEWTONS 42 x Line Pressure (BAR) POUNDS 0.65 x Line Pressure (PSI) 25.9 [1.02] TOTAL STROKE 18.8 [.74] CLAMP CLOSE 10-32 UNF PORT 12.2 [.48] Open 12.7 [.50] 12.7 [.50] - 90° ROTATION 19.1 [.75] CLOSED 63.8 [2.51] OPEN CLAMP ARM ATTACHMENT DIMENSIONS Ø 7.938 [.3125 +.001 -.000 ] CLOSED POSITION SENSOR 6.38 +.002 [.251 ] 16.0 [.63] 9.53 [.375] 23.88 [.940] 44.5 [1.75] 38.1 [1.50] 90° CLOCKWISE ARM ROTATION (CWR) ARM IN CLOSED POSITION 1/4-20 UNC -2B TAP THRU ALL 16.0 [.63] 9.53 [.375] ARM IN CLOSED POSITION 90° COUNTER-CLOCKWISE ARM ROTATION (CCR) 6.9 [.27] SLOT -.000 MAX. MASS = 0.3 LBS. [0.15 KG] ARM MAY BE POSITIONED in 90° INCREMENTS 7.9 [.31] 16.0 [.63] 12.7 [.50] LINEAR TRAVEL 7.9 [.31] 31.8 [1.25] SQUARE Ø19.05 [.75] OPEN POSITION SENSOR 4.78 [.188] 4X Ø 4.8 [.19] THRU ALL 96.8 [3.81] 2X Ø 3.20 [.126] THRU ALL Efector DC (MPEDC) HOW TO ORDER RCO ARM ROTATION SERIES GRIPPER SELECTION - 100 - 90 - CWR SENSING - MPEDC 18.0 [.71] 12.2 [.71] [.48] 18.0 12.2 [.48] 12.2 [.48] Rotary Clamp OMNI 100 Series Arm Rotation Rotation Direction Sensing Option (See p.14 for more info.) 90 = 90 Degrees CWR = Clockwise MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) CCR = CounterClockwise MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 12.2 [.48] Balluf DC (MPBDC) 16.8 [.66] 12.2 16.8 [.48] [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] NS = No Switch BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 11 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS PLC25 LIGHT DUTY PIN CLAMPS A non-locking light duty pin locator clamp designed to clamp through small holes or slots. Hole/Slot Size 6mm - 12mm Clamping Force 222N @ 5.5BAR (50lbf @ 80PSI) Finger Travel 6mm [0.24”] Total Consists of: • 3mm [0.12in] rotational • 3mm [0.12in] straight line pull down stroke Bore Diameter 25.4mm [1.00in] Cylinder Stroke 7.0mm [0.28in] Open Position Closed Position Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI] .28 kg [.62 lbs] (depending on pin size) Approximate Weight -- Use Flow Control to Reduce Impact -- HOW TO ORDER PIN SELECTION CLAMP SELECTION PLC25 Clamp Series - 6.00 SENSING - 8.00 10.00 12.00 See p. 13 - MPEDC PD226300A Sensing Option (See p.14 for more info.) Pin Diameter 6.00 ASSEMBLY NUMBER Include Standard BTM Number OR Special Number MPEDC = Efector DC Magnetic Position Sensing Switch (Note: 2 switches included & required) Pin Dia. (h6) BTM Number 6.00 PD226300A 8.00 PD226500A 10.00 PD226700A 12.00 PD226900A MPBDC = Balluf DC Magnetic Position Sensing Switch (Note: 2 switches included & required) 18.0 [.71] NS = No Switch MPEDC - EFECTOR DC BTM NO. 041424 MPBDC - BALLUF DC BTM NO. 043828 12.2 [.48] 18.0 [.71] 16.8 [.66] 12.2 [.48] 12.2 [.48] 12.2 [.48] 12.2 [.48] Electrical Type DC Electrical Type DC Operating Voltage 10 - 30 V Operating Voltage 10 - 30 V Turn On Time < 30 ms Turn On Time 0.07 ms Voltage Drop < 2.5 V Voltage Drop 3.1 V Housing Material PA Housing Material 16.8 [.66] 12.2 [.48] BN 12.2 [.48] L+ BK - 12 12.2 [.48] BU L- PBT BN + BK BU - BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS PLC25 LIGHT DUTY PIN CLAMP FOR SPECIAL APPLICAITONS DONUT CAP MAY BE ROTATED IN 90° INCREMENTS FINGER POSITION IS FIXED PIN DIAMETER h7 TOLERANCE 31.8 [1.25] SQUARE 2.4 [.09] Ø31.8 [1.25] CLAMPING SURFACE (MATERIAL MUST BE KEPT PARALLEL WITH THE DONUT CLAMPING SURFACE ) 15.0 [.59] TYP. 6.0 [.24] 38.0 [1.50] 115 [4.52] 100 [3.94] 23.88 [.94] 38.0 [1.50] 19.05 [.75] 9.53 [.38] 2X Ø 3.2 [.127] 6.4 [.25] ON 4 SIDES 23.88 [.94] 19.05 [.75] 9.53 [.38] OPEN POSITION SENSOR 4X Ø 4.9 [.19] THRU ON 4 SIDES 35.0 [1.38] CLOSED POSITION SENSOR #10-32 PORT CLOSE CLAMP Pin Diameters6mm PIN 15.9 [.63] R9.5[.37] 6mm PIN R9.5[.37] 15.0 [.59] 9.8 [3.9] 12.2 [.48] 15.0 [.59] 8mm PIN 5.5 [.22] 5.5 [.22] R9.5 [.37] 3.0 [.12] 3.0 [.12] 9.8 [3.9] 8mm PIN 6.5 [.26]3.0 [.12] 15.0 [.59]R9.5 [.37] 8.5 [.33] 15.0 [.59] 6.5 [.26] 3.0 [.12] 8.5 [.33] 12.2 [.48] #10-32 PORT OPEN CLAMP 12.2 [.48] 10mm PIN 18.4 [.72] R9.5 [.37] 15.0 [.59] 15.0 [.59] 10mm PIN 12mm PIN 7.5 [.30] R9.5 [.37] 3.0 [.12] 7.5 [.30] 7.5 [.30] 3.0 [.12] 7.5 [.30] R12.7 [.50] R12.7 [.50] 15.0 [.59] 5.3 [.21] 15.0 [.59] 5.3 [.21] 12mm PIN 7.5 [.30] 7.5 [.30]3.0 [.12] 3.0 [.12] NOTE: BTM Pin Clamps can be ordered with custom designed (non-standard) pins, donuts, and/or fingers. In such instances, a SPECIAL OPTION number will be issued by BTM’s Product Engineering Department. This number must be referenced when ordering a non-standard pin clamp. BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 13 Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS SWITCH INFORMATION Balluf or Efector DC with: • • Magnetic Sensing Adjustable sensing location (other switches may be available upon request) Balluf DC Efector DC Function Indication Short circuit protected IP67 protection degree Polarity reversal resistant Function Indication Short circuit protected IP67 protection degree Polarity reversal resistant Electrical Type DC Electrical Type DC Operating Voltage 10 - 30 V Operating Voltage 10 - 30 V Turn On Time 0.07 ms Turn On Time < 30 ms Voltage Drop 3.1 V Voltage Drop < 2.5 V Housing Material PBT Housing Material PA WIRING: WIRING: BN BN + BU Balluf DC 14 - L+ BK BK - BU L- Efector DC BTM Number BTM Number 043828 041424 BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com Catalog ID # 733657C 100 SERIES CLAMPS & GRIPPERS WARRANTY INFORMATION BTM Company, LLC. warranties its 100 Series Clamps & Grippers against defects in material and workmanship for one (1) million cycles or a period of three (3) years after the ship date from BTM, which ever comes first. This warranty is limited to replacing or repairing at BTM’s option, F.O.B. BTM’s factory, any part found by BTM to be defective in materials and/or workmanship. Any application of a BTM product outside the intended use of the product shall not be warranted by BTM Company, LLC. Furthermore, BTM will not be liable for any expenses incurred for repairs or replacement made outside BTM’s facilities without written consent (or damages arising out of such replacements or repairs). Under no circumstances will BTM be held responsible for any consequential damages. The warranty is limited to the repair or replacement of the defective part(s) and does not include installation. This warranty is the only warranty extended by the seller in connection with any sale made hereunder and is in lieu of all other warranties, express, implied or statutory including warranties of merchantability and fitness for purpose. BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com 15 BTM has a range of products for automation including: Grippers Clamps From heavy duty precision sealed locking power clamps to simple light duty OMNI models, BTM manufactures clamps in a range of styles and sizes for a wide variety of applications. Locator Clamps BTM manufactures a high quality line of grippers ranging from heavy duty models to light duty models in a variety of styles and sizes. Precision Shot Pin Cylinders BTM’s Locator Clamps are ideal for locating & holding production material and are used in a variety of manufacturing areas including automotive & refrigeration. Locking and Non-Locking Pin and Finger models available. BTM’s Precision Shot Pin Cylinders are ideal for locating production material through precisely pierced holes - including clamping and fixturing. Air/Oil Cylinders Air Toggle Presses BTM’s THIN Air Toggle Presses can be configured for a range of applications including Tog-L-Loc® clinching, piercing, riveting, and bending. Thin profile allows for close stacking. Available in a range of sizes and styles. BTM Air/Oil Cylinders generate high forces with shop air pressure to perform various press operations. They can be used with many types of tooling, including Tog-L-Loc®, Piercing, Riveting, Crimping, Stud insertion and Bending. Specialized Units BTM provides pneumatic, hydraulic, air/oil, and electrically driven units with single or dual motions for both stationary and robotic applications. For more information, or to view our other products, please visit: www.BTMcomp.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 16 Create Date : 2017:09:29 08:57:54 Creator : PDFium Producer : PDFiumEXIF Metadata provided by EXIF.tools