Flow Btm Power Grippers 100 Series 1507232577 User Manual

Btm Power Grippers 100 Series-1507232577 BTM_POWER_GRIPPERS_100_SERIES-1507232577

Btm Power Grippers 100 Series BTM POWER GRIPPERS 100 SERIES BTM POWER GRIPPERS 100 SERIES Grippers Actuator & Cylinders client_assets assets-flotronics

2017-10-06

User Manual: Flow Btm Power Grippers 100 Series-1507232577

Open the PDF directly: View PDF PDF.
Page Count: 16

Catalog ID # 733657C
Standard 25mm bore light duty clamps, grippers, and pin clamps
CLAMPS & GRIPPERS CATALOG
360° manually rotatable head for MOST models
Common mounting pattern for all models
Designed for high production
http://www.btmcomp.com/products.html
Part of BTM’s Products for Automation
100 Series
www.btmcomp.com
810-364-4567
Compact, light weight, light-duty clamps & grippers.
Designed for high-production.
25mm bore pneumatic cylinders
Common mounting pattern for all models
Position-sensing switch option available
FEATURES
Except for the Rotary-Linear Clamp, and the Pin
Clamp, BTM’s 100 series clamps & grippers are
OMNI style and feature a manually positionable
360° rotating head.
Simplify off-center mounting by rotating the head
to the desired position and mounting the body
squarely.
The head is locked into place when the mounting
screws are tightened.
Parallel Gripper
Vertical Clamp
Rotary-Linear
Clamp
180°
Gripper
Horizontal
Clamp
40°
Gripper
20°
Gripper
Linear
Clamp
Pin Clamp
BTM’S STANDARD 100 SERIES CLAMP & GRIPPER LINE
REDUCE COST
Reduce your xturing costs by eliminating angled
mounting surfaces.
THIS NOT THIS
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
2
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
MANUALLY POSITIONABLE HEAD
SAFETY NOTE
It is the customer and/or user’s responsibility to provide proper safety controls and/or guarding when a
pinch point is present.
BTM reserves the right to make changes to its literature without any prior notice.
Go to www.btmcomp.com for latest version.
!
40° DOUBLE OPENING GRIPPER ................ 5
180° GRIPPER .................................................. 6
GRIPPERS
20° SINGLE OPENING GRIPPER ................... 4
SWITCH INFORMATION ......................................... 14
WARRANTY INFORMATION ................................. 15
PARALLEL GRIPPER ....................................... 7
HORIZONTAL CLAMP ....................................... 9
LINEAR CLAMP .............................................. 10
ROTARY-LINEAR CLAMP ................................ 11
180°
40°
20°
110°
VERTICAL CLAMP ............................................ 8
130°
30.5mm [1.2”]
Linear Clamping
90°
Rotates to
Linear Clamping
17.5mm [.69”]
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
3
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
TABLE OF CONTENTS
CLAMPS
PIN CLAMP
PLC25 ....................................................... 12-13
HOW TO ORDER
90.9 [3.58]
128.5 [5.06]
16.0 [.63] 9.7 [.38]
9.7 [.38]
10.9 [.43]
20°
46.7
[1.84]
PIVOT POINT "A"
10.26
[.400]
75.2
[2.96]
48.5
[1.91]
FIXED ARM
MOVEABLE ARM
9.53 [.375]
9.53
[.375]
23.88 [.940]
2X
3.20 [.126]
6.4 [.25]
NEAR AND FAR SIDE
4X
4.8 [.19]
THRU
FOR MOUNTING
9.4 [.37]
4.8
[.19]
12.2 [.48]
12.2 [.48]
OPEN POSITION SENSOR
CLOSED
POSITION SENSOR
30.2
[1.19]
360
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
GRIPPER CLOSE
#10-32 UNF
PORT
22.1
[.87]
31.8 [1.25]
SQUARE
11.2 [.44]
GRIPPER OPEN
#10-32 UNF
PORT
Closed Open
4
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Bore Ø 25.4 [1.00in]
Stroke 6.6 [0.26in]
Total Arm Opening 20°
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.34 kg [.75 lbs]
20° SINGLE OPENING GRIPPER
Clamping Force
NEWTONS
821.6 x Line Pressure (BAR)
Length (mm) from POINT “A” to the center
line of gripping contact area on gripper arm
POUNDS
.50 x Line Pressure (PSI)
Length (in) from POINT “A” to the center line
of gripping contact area on gripper arm
PGO -
S20 =
Single 20°
Opening
S20 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Gripper
OMNI
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
-- Use Flow Control to Reduce Impact --
HOW TO ORDER
40°
90.9 [3.58]
128.5 [5.06]
16.0 [.63]
9.7 [.38]
10.7 [.42]
9.7 [.38]
46.5
[1.83]
10.16
[.400]
10.16 [.400]
75.2
[2.96]
48.5
[1.91]
PIVOT POINTS "A"
9.53 [.375]
9.53
[.375]
23.88 [.940]
2X
Ø 3.20 [.126]
6.4 [.25]
NEAR AND FAR SIDE
4X Ø
4.8 [.19]
THRU
FOR MOUNTING
9.4 [.37]
4.8
[.19]
12.2 [.48]
12.2 [.48]
OPEN POSITION SENSOR
CLOSED
POSITION SENSOR
30.2
[1.19]
360º
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
22.1
[.87]
31.8 [1.25]
SQUARE
11.2 [.44]
GRIPPER CLOSE
#10-32 UNF
PORT
GRIPPER OPEN
#10-32 UNF
PORT
Closed Open
5
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Bore Ø 25.4 [1.00in]
Stroke 6.6 [0.26in]
Total Arm Opening 40°
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.34 kg [0.75 lbs]
40° DOUBLE OPENING GRIPPER
Clamping Force
NEWTONS
821.6 x Line Pressure (BAR)
Length (mm) from POINT “A” to the center
line of gripping contact area on gripper arm
POUNDS
.50 x Line Pressure (PSI)
Length (in) from POINT “A” to the center line
of gripping contact area on gripper arm
PGO -
D40 =
Double 40°
Opening
D40 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Gripper
OMNI
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
-- Use Flow Control to Reduce Impact --
119.1
[4.69]
OPEN
180°
180°
ARM
OPENING
23.9
[.94]
32
[1.26]
38.1
[1.50]
31.8 [1.25]
SQUARE
160.8 [6.33]
6.4
[.25]
16.8
[.66]
56.1
[2.21]
75.2 [2.96]
47.8 [1.88]
16
[.63]
10.7
[.42]
23.88
[.940]
9.53
[.375]
18.8 [.74]
12.7 [.50]
6.4 [.25]
19.1 [.75]
9.53 [.375]
85.6 [3.37]
62.0 [2.44]
19.05 [.750]
24.77
[.975]
12.40
[.488]
9.53 [.375]
37.1
[1.46]
360°
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
CLOSED
POSITION SENSOR
OPEN
POSITION SENSOR
11.2 [.44]
#10-32 UNF
PORT
GRIPPER
OPEN
GRIPPER
CLOSE
#10-32 UNF
PORT
22.1
[.87]
4X Ø 4.8 [.19] THRU
FOR MOUNTING
2X Ø 3.20 [.126] 6.3 [.25]
NEAR AND FAR SIDE
4X Ø 4.3 [.17] THRU
4X 6-32 UNC -2B
TAP 7.87 [.31]
6
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Bore Ø 25.4 [1.00in]
Stroke 24.1 [0.95in]
Total Arm Opening 180°
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.54 kg [1.2 lbs]
Clamping Force
NEWTONS
821.6 x Line Pressure (BAR)
Length (mm) from POINT “A” to the center
line of gripping contact area on gripper arm
POUNDS
.50 x Line Pressure (PSI)
Length (in) from POINT “A” to the center line
of gripping contact area on gripper arm
PGO -
D180 =
Double
180°
Opening
D180 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Gripper
OMNI
GRIPPER SELECTION ARM OPENING
Closed Open
SENSING
100 -
100 Series
SERIES
-- Use Flow Control to Reduce Impact --
180°GRIPPER
HOW TO ORDER
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
68.6
[2.70]
MAX.
OPEN
89.7
[3.53]
OPEN
31.8 [1.25]
SQUARE
6.4 [.25] TYP.
51.1
[2.01]
MIN.
CLOSED
68.6
[2.70]
72.1
[2.84]
CLOSED
188.2 [7.41]
75.2 [2.96] 56.1 [2.21]
16.8
[.66]
61.0 [2.40]
16.0
[.63]
23.88 [.940]
113.3 [4.46]
67.82 [2.670]
10.01 [.394] TYP (4)
19.1 [.75]
33.3 [1.31]
OPEN POSITION SENSOR
CLOSED POSITION SENSOR
31.8
[1.25]
360°
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
11.2 [.44]
#10-32 UNF PORT
GRIPPER OPEN
GRIPPER CLOSE
#10-32 UNF PORT
22.1
[.87]
4X Ø 4.8 [.19] THRU
FOR MOUNTING
2X Ø 3.20 [.126] 6.4 [.25]
NEAR AND FAR SIDE
9.53
[.375] 9.53 [.375]
5X 8-32 UNC -2B TAP THRU ALL
7
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Closed Open
Bore Ø 25.4 [1.00in]
Stroke 21.8 [0.86in]
Total Arm Opening 17.5 [0.69in]
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.64 kg [1.4 lbs]
PARALLEL GRIPPER
Clamping Force
NEWTONS 20 x Line Pressure (BAR)
POUNDS .31 x Line Pressure (PSI)
OPG -
17.5mm =
Total Arm
Opening
17.5mm -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
OMNI Parallel
Gripper
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
-- Use Flow Control to Reduce Impact --
HOW TO ORDER
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
HOW TO ORDER
12.7
[.50]
10.16 [.400]
90.9 [3.58]
16.0 [.63]
128.5 [5.06]
130°
36.96
[1.455]
40.4
[1.59]
75.2 [2.96]
PIVOT POINT
"A"
12.2 [.48]
12.2 [.48]
CLOSED POSITION SENSOR
OPEN POSITION SENSOR
23.88 [.940]
9.53 [.375]
9.1 [.36]
CENT.
47.5
[1.87]
79.3
[3.12]
Ø30.2 [1.19]
4.8 [.19]
CENT
37.9
[1.49]
360°
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
11.2 [.44]
22.1
[.87]
31.8 [1.25]
SQUARE
9.53 [.375]
2X
Ø 3.2 [.126]
6.4 [.25]
NEAR AND FAR SIDE
4X Ø
4.8 [.19]
THRU
FOR MOUNTING
CLAMP CLOSE
#10-32 UNF PORT
CLAMP OPEN
#10-32 UNF PORT
8
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Closed Open
Bore Ø 25.4 [1.00in]
Stroke 29.2 [1.15in]
Total Arm Opening 130°
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.34 kg [0.75 lbs]
130° VERTICAL CLAMP
Clamping Force
NEWTONS
821.6 x Line Pressure (BAR)
Length (mm) from POINT “A” to the center
line of gripping contact area on gripper arm
POUNDS
0.50 x Line Pressure (PSI)
Length (in) from POINT “A” to the center line
of gripping contact area on gripper arm
PCO -
V130 =
Vertical
130°
Opening
V130 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Clamp
OMNI
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
-- Use Flow Control to Reduce Impact --
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Balluf DC (MPBDC)
Efector DC (MPEDC)
HOW TO ORDER
10.16 [.400]
90.9 [3.58]
128.5 [5.06]
110°
15.0
[.59]
9.7 [.38]
36.96
[1.455]
75.2
[2.96]
PIVOT POINT
"A"
12.2 [.48]
12.2 [.48]
CLOSED POSITION SENSOR
OPEN POSITION SENSOR
23.88 [.940] 9.53
[.375]
95.0 [3.74]
9.1 [.36]
CENT.
4.8 [.19]
CENT.
41.7
[1.64]
Ø30.2 [1.19]
360°
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
11.2 [.44]
22.1
[.87]
31.8 [1.25]
SQUARE
9.53 [.375]
2X
Ø 3.20 [.126]
6.4 [.25]
NEAR AND FAR SIDE
4X Ø
4.8 [.19]
THRU
FOR MOUNTING
CLAMP CLOSE
#10-32 UNF PORT
CLAMP OPEN
#10-32 UNF PORT
16.0 [.63]
9
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Closed Open
Bore Ø 25.4 [1.00in]
Stroke 25.9 [1.02in]
Total Arm Opening 180°
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.30 kg [0.671 lbs]
110° HORIZONTAL CLAMP
Clamping Force
NEWTONS
821.6 x Line Pressure (BAR)
Length (mm) from POINT “A” to the center
line of gripping contact area on gripper arm
POUNDS
0.50 x Line Pressure (PSI)
Length (in) from POINT “A” to the center line
of gripping contact area on gripper arm
PCO -
H110 =
Horizontal
110°
Opening
H110 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Clamp
OMNI
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
-- Use Flow Control to Reduce Impact --
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
16.0 [.63]
128.5 [5.06]
90.9 [3.58]
9.7
[.38]
29.2 [1.15]
STROKE
137.2 [5.40]
75.2 [2.96]
23.4
[.92]
12.2 [.48]
OPEN POSITION SENSOR
CLOSED POSITION SENSOR
23.88 [.940]
Ø 30.2 [1.19] 52.6
[2.07]
9.4 [.37]
CENT.
4.8 [.19]
CENT.
36.8
[1.45]
360°
AVAILABLE ROTATION
(OMNI HEAD AND ARM)
FRONT MOUNTING SCREWS
LOCK THE OMNI HEAD IN
POSITION
11.2 [.44]
22.1 [.87]
31.8 [1.25]
SQUARE
2X
Ø 3.20 [.126]
6.4 [.25]
NEAR AND FAR SIDE
4X Ø
4.8 [.19]
THRU
FOR MOUNTING
9.53
[.375] 9.53 [.375]
12.2 [.48]
CLAMP OPEN
#10-32 UNF PORT
CLAMP CLOSE
#10-32 UNF PORT
10
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Closed Open
Bore Ø 25.4 [1.00in]
Stroke 29.2 [1.15in]
Total Arm Opening 29.2 [1.15in]
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.30 kg [0.659 lbs]
LINEAR CLAMP
PCO -
SL1.2 =
29.2 [1.15in]
Linear Arm
Opening
SL1.2 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Power Clamp
OMNI
GRIPPER SELECTION ARM OPENING SENSING
100 -
100 Series
SERIES
Clamping Force
NEWTONS 42 x Line Pressure (BAR)
POUNDS 0.65 x Line Pressure (PSI)
-- Use Flow Control to Reduce Impact --
HOW TO ORDER
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Balluf DC (MPBDC)
Efector DC (MPEDC)
19.1
[.75]
CLOSED
12.7
[.50]
25.9 [1.02]
TOTAL STROKE
18.8 [.74]
63.8 [2.51] OPEN
12.7
[.50]
LINEAR
TRAVEL
12.7 [.50] - 90°
ROTATION
Ø19.05 [.75]
9.53 [.375]
23.88
[.940]
4X Ø 4.8 [.19] THRU ALL
96.8 [3.81]
16.0 [.63]
7.9 [.31]
44.5
[1.75]
38.1
[1.50]
1/4-20 UNC -2B TAP THRU ALL
16.0
[.63]
31.8
[1.25]
SQUARE
90° CLOCKWISE
ARM ROTATION
(CWR)
ARM MAY BE
POSITIONED
in 90° INCREMENTS
12.2
[.48]
CLAMP CLOSE
10-32 UNF PORT
CLAMP OPEN
10-32 UNF PORT
90° COUNTER-CLOCKWISE
ARM ROTATION
(CCR)
ARM IN CLOSED
POSITION
ARM IN CLOSED
POSITION
4.78 [.188]
7.9 [.31]
6.9 [.27] SLOT
MAX. MASS = 0.3 LBS. [0.15 KG]
CLAMP ARM ATTACHMENT DIMENSIONS
12.2
[.48]
12.2 [.48]
Ø 7.938 [.3125 ]
-.000
+.001
6.38
[.251 ]
-.000
+.002
9.53 [.375]
2X Ø 3.20 [.126] THRU ALL
OPEN
POSITION SENSOR
CLOSED POSITION SENSOR
16.0 [.63]
31.8 [1.25]
SQUARE
11
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Closed Open
Bore Ø 25.4 [1.00in]
Stroke 25.9 [1.02in]
Total Arm Opening
25.91 [1.02in] Total Stroke
Consists of:
• 7.87 [0.31in] - 90° rotation
• 18.03 [0.71in] linear travel
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight 0.35 kg [0.769 lbs]
ROTARY-LINEAR CLAMP
Clamping Force
NEWTONS 42 x Line Pressure (BAR)
POUNDS 0.65 x Line Pressure (PSI)
-- Use Flow Control to Reduce Impact --
HOW TO ORDER
RCO -
Arm
Rotation
90 =
90 Degrees
90 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
MPEDC
Rotary Clamp
OMNI
GRIPPER SELECTION ARM ROTATION SENSING
100 -
100 Series
SERIES
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
Efector DC (MPEDC)
Balluf DC (MPBDC)
Rotation
Direction
CWR =
Clockwise
CCR =
Counter-
Clockwise
CWR -
12
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Hole/Slot Size 6mm - 12mm
Clamping Force 222N @ 5.5BAR (50lbf @ 80PSI)
Finger Travel
6mm [0.24”] Total
Consists of:
• 3mm [0.12in] rotational
• 3mm [0.12in] straight line pull down
stroke
Bore Diameter 25.4mm [1.00in]
Cylinder Stroke 7.0mm [0.28in]
Recommended Operating Pressure 4.0 - 6.9 BAR [60 - 100 PSI]
Approximate Weight .28 kg [.62 lbs] (depending on pin size)
-- Use Flow Control to Reduce Impact --
Open Position
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
MPEDC - EFECTOR DC
Electrical Type DC
Operating Voltage 10 - 30 V
Turn On Time < 30 ms
Voltage Drop < 2.5 V
Housing Material PA
-
BN
BK
BU
L +
L -
18.0 [.71]
12.2 [.48]
12.2 [.48]
16.8 [.66]
12.2 [.48]
12.2 [.48]
MPBDC - BALLUF DC
Electrical Type DC
Operating Voltage 10 - 30 V
Turn On Time 0.07 ms
Voltage Drop 3.1 V
Housing Material PBT
BN
BK
BU
+
-
BTM NO. 041424 BTM NO. 043828
PLC25 LIGHT DUTY PIN CLAMPS
Closed Position
PLC25 -
Pin Diameter
6.00
8.00
10.00
12.00
See p. 13
6.00 -
Sensing Option
(See p.14 for more info.)
MPEDC =
Efector DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
MPBDC =
Balluf DC Magnetic Position Sensing Switch
(Note: 2 switches included & required)
NS = No Switch
-
MPEDC PD226300A
Include Standard BTM Number
OR Special Number
Pin Dia. (h6) BTM Number
6.00 PD226300A
8.00 PD226500A
10.00 PD226700A
12.00 PD226900A
Clamp Series
CLAMP SELECTION PIN SELECTION SENSING ASSEMBLY NUMBER
A non-locking light duty pin locator clamp designed to clamp through small holes or slots.
HOW TO ORDER
13
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
Pin Diameters
15.0 [.59] TYP.
100
[3.94]
115
[4.52]
2X Ø 3.2 [.127] 6.4 [.25]
ON 4 SIDES
23.88 [.94]
6.0 [.24]
38.0
[1.50]
9.53 [.38]
19.05 [.75]
CLAMPING SURFACE
(MATERIAL MUST BE KEPT PARALLEL
WITH THE DONUT CLAMPING SURFACE )
23.88 [.94]
38.0
[1.50]
19.05 [.75]
9.53
[.38]
35.0
[1.38]
OPEN
POSITION
SENSOR
CLOSED
POSITION
SENSOR
31.8 [1.25]
SQUARE
2.4 [.09]
Ø31.8 [1.25]
FOR SPECIAL APPLICAITONS
DONUT CAP MAY BE ROTATED
IN 90°
INCREMENTS
FINGER POSITION IS FIXED
PIN DIAMETER
h7 TOLERANCE
15.9 [.63]
12.2 [.48]
12.2 [.48]
12.2 [.48]
OPEN CLAMP
#10-32 PORT
CLOSE CLAMP
#10-32 PORT
4X Ø 4.9 [.19] THRU
ON 4 SIDES
18.4 [.72]
3.0 [.12]
6.5 [.26]
R9.5 [.37]
8.5 [.33]
8mm PIN
3.0 [.12]
7.5 [.30]R9.5 [.37]
7.5 [.30]
10mm PIN
3.0 [.12]
7.5 [.30]
R12.7 [.50]
5.3 [.21]
12mm PIN
3.0 [.12]
5.5 [.22]R9.5[.37]
9.8 [3.9]
6mm PIN
15.0 [.59] 15.0 [.59]
15.0 [.59] 15.0 [.59]
NOTE: BTM Pin Clamps can be ordered with custom designed (non-standard)
pins, donuts, and/or ngers. In such instances, a SPECIAL OPTION number will
be issued by BTM’s Product Engineering Department. This number must be
referenced when ordering a non-standard pin clamp.
3.0 [.12]
6.5 [.26]
R9.5 [.37]
8.5 [.33]
8mm PIN
3.0 [.12]
7.5 [.30]R9.5 [.37]
7.5 [.30]
10mm PIN
3.0 [.12]
7.5 [.30]
R12.7 [.50]
5.3 [.21]
12mm PIN
3.0 [.12]
5.5 [.22]R9.5[.37]
9.8 [3.9]
6mm PIN
15.0 [.59] 15.0 [.59]
15.0 [.59] 15.0 [.59]
PLC25 LIGHT DUTY PIN CLAMP
Balluf or Efector DC with:
• Magnetic Sensing
• Adjustable sensing location
(other switches may be available upon request)
Balluf DC
Function Indication
Short circuit protected
IP67 protection degree
Polarity reversal resistant
Electrical Type DC
Operating Voltage 10 - 30 V
Turn On Time 0.07 ms
Voltage Drop 3.1 V
Housing Material PBT
Efector DC
Function Indication
Short circuit protected
IP67 protection degree
Polarity reversal resistant
Electrical Type DC
Operating Voltage 10 - 30 V
Turn On Time < 30 ms
Voltage Drop < 2.5 V
Housing Material PA
WIRING: WIRING:
BN
BK
BU
+
-
-
BK
BU
L +
L -
14
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
SWITCH INFORMATION
Balluf DC
BTM Number
043828
Efector DC
BTM Number
041424
WARRANTY INFORMATION
BTM Company, LLC. warranties its 100 Series Clamps & Grippers against defects in material
and workmanship for one (1) million cycles or a period of three (3) years after the ship date
from BTM, which ever comes rst.
This warranty is limited to replacing or repairing at BTM’s option, F.O.B. BTM’s factory, any
part found by BTM to be defective in materials and/or workmanship. Any application of
a BTM product outside the intended use of the product shall not be warranted by BTM
Company, LLC. Furthermore, BTM will not be liable for any expenses incurred for repairs or
replacement made outside BTM’s facilities without written consent (or damages arising out
of such replacements or repairs). Under no circumstances will BTM be held responsible for
any consequential damages.
The warranty is limited to the repair or replacement of the defective part(s) and does not
include installation.
This warranty is the only warranty extended by the seller in connection with any sale made
hereunder and is in lieu of all other warranties, express, implied or statutory including
warranties of merchantability and tness for purpose.
15
BTM CORPORATION • 300 DAVIS ROAD • MARYSVILLE, MI 48040 • Tel: 810-364-4567 • Fax: 810-364-6178 • www.BTMcorp.com
Catalog ID # 733657C
100 SERIES CLAMPS & GRIPPERS
www.BTMCoMP.CoM
For more information, or to view our other products, please visit:
Clamps
Locator Clamps
Air Toggle Presses
Specialized Units
Grippers
Precision Shot Pin Cylinders
Air/Oil Cylinders
BTM has a range of products for automation including:
BTM’s Locator Clamps are ideal for
locating & holding production material
and are used in a variety of manufacturing
areas including automotive & refrigeration.
Locking and Non-Locking Pin and Finger
models available.
From heavy duty precision sealed locking
power clamps to simple light duty OMNI
models, BTM manufactures clamps in a
range of styles and sizes for a wide variety
of applications.
BTM’s THIN Air Toggle Presses can be con-
gured for a range of applications including
Tog-L-Loc
®
clinching, piercing, riveting, and
bending. Thin prole allows for close stacking.
Available in a range of sizes and styles.
BTM provides pneumatic, hydraulic, air/oil,
and electrically driven units with single
or dual motions for both stationary and
robotic applications.
BTM manufactures a high quality line of
grippers ranging from heavy duty models
to light duty models in a variety of styles
and sizes.
BTM’s Precision Shot Pin Cylinders are
ideal for locating production material
through precisely pierced holes - including
clamping and xturing.
BTM Air/Oil Cylinders generate high forces
with shop air pressure to perform various
press operations. They can be used with many
types of tooling, including Tog-L-Loc
®
, Piercing,
Riveting, Crimping, Stud insertion and Bending.

Navigation menu