Flow Numatics Old Composite Fittings Qr3 1505490135 Accessories Catalog User Manual

Numatics-Old- Composite Fittings Qr3-1505490135 NUMATICS-OLD-_COMPOSITE_FITTINGS_QR3-1505490135

User Manual: Flow Numatics-Old- Composite Fittings Qr3-1505490135

Open the PDF directly: View PDF .
Page Count: 42

Download
Open PDF In Browser	View PDF

Accessories
Numatics, Inc.

nylon,

system QR3000

polyurethane
or polyethylene

principle of operation:

tubing
collet

The Numatics QR3000 push to connect
fitting system is easy to operate. Simply
push in the tubing until it can go no further.
Holdin g an d sealing is accomplished
instantaneously.
To disconnect, first de-press the manual
release button, then pull the tubing out of
the fitting.

seal

features:
• more than 1 Billion fittings are in service.
• it is offered in 2 forms
- fractional inch tube to NPT and 10-32
UNF thread forms
- metric tube to BSP Tapered or Parallel
form
• in response to continuing demand and
new applications, we are constantly
expanding and improving our product
range.

manual release button

The QR3000 fitting is supplied complete with green manual
release buttons and pre-applied thread sealant. 3rd
generation NPT, BSPT, BSPP, 10-32 and M5 threads are
nickel plated.
The green button may be replaced with buttons of another color.

1969

1985

First Generation
The concept of instant fitting - instant connection
and disconnection; no tools required.

working
specifications

pre-coated taper thread

Second Generation
Use of a new material: a High
Resistance polymer- increasing
mechanical performance.

TODAY
Third Generation
Optimization of all performances
and miniaturization of the entire
product range

2nd Generation:

Fractional Inch Sizes: 1/8", 3/16", 1/2" Metric Sizes: 14mm

• working Pressure:

Maximum 250 psi

The reliability of our • working Temperature:
product is dependent
on the tube being used
3rd Generation:
and the component
materials of the fitting.

Maximum 160°F
Fractional Inch Sizes: 5/32", 1/4", 5/16",3/8", Metric Sizes: 4mm,
6mm, 8mm, 10mm, 12mm

• working Pressure:

28Hg-275 PSI at ambient temperature

• working Temperature:

Maximum 175°F

• suitable Fluids :

Compressed air only. Lubricated or nonlubricated. For liquids or other types
of compressed gases, please consult us.

• many different
types of tubing
can be used

Nylon, Polyurethane, Polyethylene

• materials of
Construction

Brass (2nd Generation) • nickel plated brass (3rd Generation) • black body
- glass filled nylon • o-ring seal - buna Nitrile • button - polypropylene •
thread sealant • sealing washers - nylon

All 3rd Generation fittings are silicone free.
For further information, please consult us.
Numatics has a policy of continual product development and reserves the right to change dimensions or
specifications without prior notification.

A-2

advantages
QR3000 push-to-connect fittings
• OPTIMUM FLOW
Full Flow: The gripping and
sealing of the fitting is achieved
using the outside diameter of the
tube without deformation, compact yet no restriction in flow.

optimum
flow

• IMMEDIATE SEAL
QR3000 3rd generation seals both
in static and dynamic applications
• Automatic Seal: The tube seal
provides a positive seal on the
O.D. of the tube. NPT and BSPT
threads are supplied with
preapplied thread sealant.
• 10/32 and M5 versions utilize
a nylon washer or o-ring to
seal the connection.

immediate
seal

• INSTANTANEOUS
CONNECTION/DISCONNECTION

instantaneous
connection and
disconnection

5/16, 3/8, 8mm, 10mm, 12mm

to connect

to disconnect

Tubing is connected or
disconnected without the use of
any special tools.
Fittings come standard with a
green release button. Release buttons are available in several colors
to enable color coding of circuits.
• semi rigid nylon tube from 1/8"
to 1/2" O.D. and 4mm to 14mm
O.D.

use of many
different types
of tubing

• polyurethane tube from 5/32" to
1/2" O.D. and 4mm to 12mm
O.D.
• polyethylene tube from 1/8" to
1/2" O.D.

Space Saving Characteristics
of the QR 3000
Close placement of QR 3000
hex socket male
connector fittings.

5/32, 1/4, 4mm, 6mm

Simply push the tubing
First depress the manual
until it can go no further.
release button, then
Holding and sealing is
pull the tubing out of
accomplished
the fitting.
instantaneously.
Average time
Possible
each connection
connections
Type of fitting
(in Seconds)
per hour
QR 3000

3 Sec.

1200

Typical plastic tube

12 Sec.

300

Typical compression

19 Sec.

180

Typical flare

49 Sec.

73

Comparison of typical and
QR 3000 fittings

Straight Male Spacing
The drawing below shows the
close spacing of male fittings.

Typical

QR 3000

Hex wrench

Tee / Elbow Spacing
The drawing on this page shows how
quick and easy it is to orient the QR
3000 Instant Fitting
- Rotation of fitting to desired
position
- Close placement of fittings
for minimum space requirements.

TEES OR ELBOWS

Tube
O,D.
1/8
1/8
5/32
3/16
1/4
5/16
3/8
1/2

Pipe
thread
NPT
1/16
1/8
1/8
1/8
1/4
1/4
1/4
3/8

QR 3000
spacing
.512
.512
.512
.512
.670
.670
.900
1.060

Typical
fitting
spacing
1.181
1.181
1.181
1.181
1.400
1.400
2.010
2.170

STRAIGHT MALE FITTINGS

QR 3000
spacing
.540
.540
.540
.540
.690
.690
.900
1.040

Typical
fitting
spacing
.795
.795
.795
.795
1.010
1.010
1.420
1.630

A-3

the complete range of QR3000 push to connect fittings
fractional inch tubing to N.P.T. and 10-32 U.N.F.
push-in fittings — tube to male or female n.p.t.
QR3175/
3115

QR3171

QR3148

QR3103

page A-6

page A-6

page A-6

QR3109

QR3129

page A-7

page A-7

QR3108

QR3118

page A-7

page A-8

page A-6

QR3018
page A-8

QR3014/
3114

QR3009

QR3008

page A-9

page A-9

page A-9

tube-to-tube fittings and accessories: plug-in fittings
QR3106

QR3102

QR3104

QR3140

QR3144

QR3304

QR3156

QR3332

page A-10

page A-10

page A-10

page A-10

page A-11

page A-11

page A-12

page A-12

QR3142

QR3143

QR3120

page A-15

page A-15

page A-15

QR3186

QR3166

QR3168

QR3126

page A-13

page A-14

page A-14

page A-14

tubing and accessories
QR3330

Nylon 11

Low Density

Poly 95

QRCLIP

QR300071

page A-16

page A-17

page A-18

page A-19

page A-20

page A-20

n.p.t. to b.s.p. adaptors

A-4

QR0121

QR0164

QR0167

page A-21

page A-21

page A-21

the complete range of QR3000 push to connect fittings
metric tube to BSP and M5 threads
push-in fittings - tapered (with pre-coating) parallel and metric (with washer)
QR3175

QR3101

page A-22

page A-22

page A-23

QR3108

QR3103

QR3198

page A-26

page A-26

page A-26

QR3114

QR3148

QR3158

QR3109

QR3129

page A-23

page A-23

page A-24

page A-24

QR3199

QR3169

page A-24

page A-25

QR3183

QR3156

tube to tube fittings and accessories: plug-in fittings
QR3106

QR3106

QR3102

QR3104

QR3140

QR3144

QR3304

page A-27

page A-27

page A-27

page A-27

page A-28

page A-28

page A-29

QR3332

QR3166

QR3168

QR3126

QR3142

QR3143

QR3120

page A-29

page A-30

page A-30

page A-30

page A-31

page A-31

plastic
page A-31

page A-29

page A-29

QR3170

QR3330

page A-31

page A-32

tubing and accessories
Metric
Poly 95

QRCLIP

QR300071

page A-34

page A-34

page A-33

the complete accessory line from Numatics
Valves, silencers, flow controls and Numatrol fittings & tubing
SEV

OA22-1

MV

A1MN

B1MN

M1MN/FN P0MN

FCRN

1FC1

page A-35

page A-35

page A-36

page A-36

page A-36

page A-37

page A-39

page A-40

right angle
flow control

inline
flow control

quick exhaust
valve

shuttle valve

metering valve

speed control
muffler

breather vent
silencer

2FC1K

FC2

FC3

134

135

page A-40

page A-40

page A-40

page A-41

page A-42

inline
flow control

inline
flow control

inline
flow control

Numatrol fittings

metal air
silencer

page A-38

porous bronze
air silencer

Numatrol tubing

A-5

threaded fittings
QR3175/3115
3rd generation

nickel plated brass

2nd generation
O.D.

brass

QR3171

tube to male NPT
Previous QR
Part Number

F1

F2

H

K

q

QR3175 53 08 3115 53 08
QR3175 53 11 3115 53 11
QR3175 53 14 3115 53 14

7/16
7/16
9/16

7/64
7/64
7/64

.59
.49
.39

.51
.51
.65

.35
.35
.53

11mm 2.5mm
14mm 2.5mm

.34
.28

.47
.59

.35
.53

.61
.59

.51
.65

.67
.81

O.D. C
TUBE NPT

oz

1/8
1/8
1/8

1/16
1/8
1/4

5/32
5/32

1/8
1/4

QR3175 04 11
QR3175 04 14

3115 54 11
3115 54 14

3/16
3/16

1/8
1/4

QR3175 55 11
QR3175 55 14

3115 55 11
3115 55 14

1/4
1/4
1/4

1/8
1/4
3/8

QR3175 56 11
QR3175 56 14
QR3175 56 18

3115 56 11
3115 56 14
3115 56 18

11mm 2.5mm
14mm 4mm
18mm 4mm

.34
.37
.30

.47
.59
.77

.63
.74
.99

5/16
5/16
5/16

1/8
1/4
3/8

QR3175 08 11
QR3175 08 14
QR3175 08 18

3115 58 11
3115 58 14
3115 58 18

13mm
14mm
18mm

5mm
5mm
5mm

.79
.66
.46

.55
.59
.77

.63
.74
.99

3/8
3/8
3/8
3/8

1/8
1/4
3/8
1/2

QR3175 60 11
QR3175 60 14
QR3175 60 18
QR3175 60 22

3115 60 11
3115 60 14
3115 60 18
3115 60 22

16mm
16mm
18mm
22mm

5/32
9/32
9/32
9/32

.894
.807
.689
.61

.689
.689
.767
.945

1.02
1.02
1.41
2.61

1/2
1/2
1/2

1/4
3/8
1/2

QR3115 62 14
QR3115 62 18
QR3115 62 22

7/8
7/8
7/8

1/4
5/16
3/8

1.00
1.00
1.00

1.01
1.01
1.01

2.29
2.43
2.29

H

K

q

2

.55

.35

.17

2

.45

.55

.18

2

.63

0.42

.19

7/16
9/16

1/8
5/32

tube to 10-32 UNF
O.D. C
TUBE UNF

Previous QR
Part Number

1/8

10-32 QR3171 53 20

5/32

10-32 QR3171 04 20

1/4

10-32 QR3171 56 20

F2

F

(mm)

3171 54 20
0.16

oz

nickel plated brass

QR3148

"Y" male NPT — tube
O.D.
C
TUBE NPT

C

QR3103

F

H

K

L

N

q
oz

5/32

1/8

QR3148 04 11

3148 54 11

10

1.22

.334 .688

.354 .35

5/32

1/4

QR3148 04 14

3148 54 14

14

1.24

.334 .688

.354 .63

male run tee — tube to tube to male NPT

3rd generation

2nd generation

O.D.

A-6

Previous QR
Part Number

O.D.
C
TUBE NPT/UNF

Previous QR
Part Number

F

G

H

H1

L

q
oz

1/8
1/8
1/8

10-32 QR3103 53 20
1/16 QR3103 53 08
1/8 QR3103 53 11

7/16 .42 1.44 .72
7/16 .42 1.48 .75
7/16 .42 1.48 .75

.73
.73
.73

.46
.50
.53

5/32
5/32
5/32

10-32 QR3103 04 20 3103 54 20 8mm .33 1.02 .45
1/8 QR3103 04 11 3103 54 11 11mm .33 .93 .53
1/4 QR3103 04 14 3103 54 14 14mm .33 .94 .37

.57
.57
.57

.21
.25
.28

3/16

1/8

QR3103 55 11

.75

.73

.71

1/4
1/4
1/4

1/8
1/4
3/8

QR3103 56 11
QR3103 56 14
QR3103 56 18

11mm .43 1.16 .45
14mm .43 1.12 .41
18mm .43 1.14 .43

7/16 .43 1.48

.71
.71
.71

.32
.60
.65

5/16
5/16
5/16

1/8
1/4
3/8

QR3103 08 11 3103 58 11 11mm .53 1.38 .49
QR3103 08 14 3103 58 14 14mm .53 1.34 .45
QR3103 08 18
18mm .53 1.36 .47

.91
.91
.91

.56
.67
.78

3/8
3/8
3/8
3/8

1/8
1/4
3/8
1/2

QR3103 60 11
QR3103 60 14
QR3103 60 18
QR3103 60 22

1.04
1.04
1.04
1.04

2.30
2.44
2.44
3.00

1/2
1/2
1/2

1/4
3/8
1/2

QR3103 62 14
QR3103 62 18
QR3103 62 22

15mm .63
15mm .63
18mm .63
22mm .63
7/8
7/8
7/8

1.63
1.63
1.60
1.63

.60
.60
.55
.59

.95 2.46 1.26 1.20 3.11
.95 2.46 1.26 1.20 3.25
.95 2.50 1.30 1.20 3.88

10-32 O-Ring replacement part number 31419
Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

threaded fittings
QR3109 male elbow — tube to male NPT
3rd generation

2nd generation
O.D.

QR3129

F

G

H

L

q

7/16
7/16
7/16
9/16

.42
.42
.42
.42

.92
.96
.96
.96

.73
.73
.73
.73

.35
.35
.42
.67

.33
.33
.33
.43
.43
.43
.43
.43

.53
.53
.55
.96
.63
.67
.63
.65

.55
.55
.55
.73
.71
.71
.71
.71

.17
.21
.50
.56
.17
.21
.53
.62

.75
.71
.73

.91
.91
.91

.46
.53
.64

1.08
1.08
1.08
1.08

1.89
1.94
2.12
3.25

Previous QR
Part Number

oz

1/8
1/8
1/8
1/8

10-32
1/16
1/8
1/4

QR3109 53 20
QR3109 53 08
QR3109 53 11
QR3109 53 14

5/32
5/32
5/32
3/16
1/4
1/4
1/4
1/4

10-32
1/8
1/4
1/8
10-32
1/8
1/4
3/8

QR3109 04 20 3109 54 20 8mm
QR3109 04 11 3109 54 11 11mm
QR3109 04 14 3109 54 14 14mm
QR3109 55 11
7/16
QR3109 56 20
11mm
QR3109 56 11
11mm
QR3109 56 14
14mm
QR3109 56 18
18mm

5/16
5/16
5/16

1/8
1/4
3/8

QR3109 08 11 3109 58 11 11mm .53
QR3109 08 14 3109 58 14 14mm .53
QR3109 08 18
18mm .53

3/8
3/8
3/8
3/8

1/8
1/4
3/8
1/2

QR3109 60 11
QR3109 60 14
QR3109 60 18
QR3109 60 22

15mm
15mm
18mm
22mm

.63
.63
.63
.63

.91
.91
.87
.91

1/2
1/2
1/2

1/4
3/8
1/2

QR3109 62 14
QR3109 62 18
QR3109 62 22

7/8
7/8
7/8

.95
.95
.95

1.73 1.20 2.51
1.73 1.20 2.61
1.77 1.20 3.25

extended male elbow — tube to male NPT

3rd generation

2nd generation
O.D.

QR3108

O.D. C
TUBE NPT/UNF

O.D. C
TUBE NPT

Previous QR
Part Number

F

G

H

L

q

.91
.93

.75
.75

.74
1.34

.93
.93

1.31
1.55

oz

5/32
5/32

1/8
1/4

QR3129 04 11 3129 54 11 11mm .33
QR3129 04 14 3129 54 14 14mm .33

1/4
1/4

1/8
1/4

QR3129 56 11
QR3129 56 14

11mm .43
14mm .43

1.12
1.08

5/16
5/16

1/8
1/4

QR3129 08 11
QR3129 08 14

13mm .53
14mm .53

1.32 1.16 1.31
1.28 1.16 1.55

3/8
3/8

1/4
3/8

QR3129 60 14
QR3129 60 18

17mm .63
18mm .63

1.41 1.33 2.22
1.45 1.33 3.53

male branch tee — tube to male NPT to tube

3rd generation

2nd generation
O.D.

O.D. C
TUBENPT/UNF

Previous QR
Part Number

F

G

H

L
2

q

7/16
7/16
7/16

oz

1/8
1/8
1/8

10-32
1/16
1/8

QR3108 53 20
QR3108 53 08
QR3108 53 11

.42
.42
.42

.92
.96
.96

.73
.73
.73

.46
.50
.53

5/32
5/32
5/32

10-32
1/8
1/4

QR3108 04 20 3108 54 20 8mm .33
QR3108 04 11 3108 54 11 11mm .33
QR3108 04 14 3108 54 14 14mm .33

.71
.61
.63

.55
.55
.55

.20
.25
.28

3/16

1/8

QR3108 55 11

.43

.96

.73

.71

1/4
1/4
1/4

1/8
1/4
3/8

QR3108 56 11
QR3108 56 14
QR3108 56 18

11mm .43
14mm .43
18mm .43

.67
.63
.65

.71
.71
.71

.32
.60
.71

5/16
5/16
5/16

1/8
1/4
3/8

QR3108 08 11 3108 58 11 11mm .53
QR3108 08 14 3108 58 14 14mm .53
QR3108 08 18 3108 58 18 18mm .53

.87
.83
.85

.91
.91
.91

.57
.67
.74

3/8
3/8
3/8
3/8

1/8
1/4
3/8
1/2

QR3108 60 11
QR3108 60 14
QR3108 60 18
QR3108 60 22

15mm
15mm
18mm
22mm

.63
.63
.63
.63

.99
.99
.95
.98

1.04
1.04
1.04
1.04

2.30
2.44
2.44
3.00

1/2
1/2
1/2

1/4
3/8
1/2

QR3108 62 14
QR3108 62 18
QR3108 62 22

7/8
7/8
7/8

.95
.95
.95

1.73 1.98 3.11
1.73 1.98 3.25
1.77 1.98 3.88

7/16

10-32 O-Ring replacement part number 31419
Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

A-7

threaded fittings
QR3118 banjo — tube to 10-32 UNF
O.D. C
TUBE UNF

O.D.

QR3018

H

J

L1

L2

q
oz

1/8

10-32 QR3118 53 20 5/16

.53

3/8

.19

.85

.46

5/32

10-32 QR3118 54 20 5/16

.53

3/8

.19

.85

.46

1/4

10-32 QR3118 56 20 5/16

.53

1/2

.19

.87

.65

F

H

J

L1

L2

q

1/2

.77

.63

.32

.90

.67

.78
.78
.81

.63
.79
.98

.36
.42
.49

.96
1.02
1.57

.74
.99
1.73

.81
.81

.98
.98

.49
.49

1.57
1.57

2.05
2.15

banjo — tube to NPT
O.D.
C
TUBE NPT

A-8

F

5/32

1/8 QR3018 54 11

1/4
1/4
1/4

1/8 QR3018 56 11 1/2
1/4 QR3018 56 14 11/16
3/8 QR3018 56 18 7/8

3/8
3/8

1/4 QR3018 60 14
3/8 QR3018 60 18

7/8
7/8

10-32 O-Ring replacement part number 31419
Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

oz

female threaded fittings
QR3014

straight female connector — tube to NPT
O.D. C
TUBE NPT

3rd generation

2nd generation

QR3009

F

G

H

E

q
oz

1/8
1/8

1/8 QR3014 53 11 3114 53 11 9/16
1/4 QR3014 53 14 3114 53 14 11/16

1.06
1.26

.74
1.13

5/32
5/32

1/8 QR3014 04 11 3114 54 11 13mm .32
1/4 QR3014 04 14 3114 54 14 16mm .32

.89
1.06

3/16
3/16

1/8 QR3014 55 11 3114 55 11 9/16
1/4 QR3014 55 14 3114 55 14 11/16

1.06
1.26

1/4
1/4

1/8 QR3014 56 11 3114 56 11 13mm .42
1/4 QR3014 56 14 3114 56 14 16mm .42

.98
1.16

.37
.55

.39
.56

5/16
5/16

1/8 QR3014 08 11 3114 58 11 13mm .53
1/4 QR3014 08 14 3114 58 14 16mm .53

1.14
1.32

.37
.55

.71
.95

3/8
3/8

1/4 QR3014 60 14 3114 60 14 16mm .61
3/8 QR3014 60 18 3114 60 18 22mm .61

1.40
1.51

.55
.65

2.50
2.58

E

L

q

.37
.55

.35
.56
.92
1.27

female elbow — tube to NPT

3rd generation

O.D.
C
TUBE NPT

2nd generation
O.D.

QR3008

Previous QR
Part Number

Previous QR
Part Number

F

G

H

.42 1.21

oz

1/8

1/8 QR3009 53 11

9/16

.73

.42

5/32
5/32

1/8 QR3009 04 11 3009 54 11
1/4 QR3009 04 14 3009 54 14

13mm .33 .91 .37
16mm .33 1.08 .55

.55
.55

.40
.45

1/4
1/4

1/8 QR3009 56 11
1/4 QR3009 56 14

13mm .43 1.02 .37
16mm .43 1.18 .55

.71
.71

.42
.49

5/16
5/16

1/8 QR3009 08 11 3009 58 11
1/4 QR3009 08 14 3009 58 14

13mm .53 1.12 .37
16mm .53 1.28 .55

.91
.91

.66
.69

3/8

1/4 QR3009 60 14

16mm .63 1.52 .55 1.04

.81

1/2

3/8 QR3009 62 18

7/8

.95 2.17

F

G

9/16

1.20 3.25

female branch tee — tube to NPT

3rd generation

O.D. C
TUBE NPT

2nd generation
O.D.

Previous QR
Part Number

H

E

L
2

q
oz

1/8

1/8 QR3008 53 11

.42 1.21

.73

.53

5/32
5/32

1/8 QR3008 04 11 3008 54 11 13mm .33 .91
1/4 QR3008 04 14 3008 54 14 16mm .33 1.08

.37 .55
.55 .55

.40
.45

1/4
1/4

1/8 QR3008 56 11
1/4 QR3008 56 14

13mm .43 1.02
16mm .43 1.18

.37 .71
.55 .71

.42
.49

5/16
5/16

1/8 QR3008 08 11 3008 58 11 13mm .53 1.24
1/4 QR3008 08 14 3008 58 14 16mm .53 1.40

.37 .91
.55 .91

.66
.69

3/8

1/4 QR3008 60 14

1/2

3/8 QR3008 62 18

16mm .63 1.60
7/8

.95 2.17

.55 1.04 2.44
1.20 3.25

H

Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

A-9

tube to tube fittings
QR3106

union — tube to tube

3rd generation

O.D.
TUBE

2nd generation
L

O.D.

G

QR3102

1/8

QR3106 53 00

5/32

QR3106 04 00

3/16

QR3106 55 00

3106 54 00

G

L

oz

.42

1.45

.21

.33

.98

.07

.43

1.26

.28

.43

1.16

.14

.53

1.50

.25

1/4

QR3106 56 00

5/16

QR3106 08 00

3/8

QR3106 60 00

.63

1.65

.95

1/2

QR3106 62 00

.95

1.92

1.16

G

L

oz

.42

.93

.21

.33

.75

.07

3106 58 00

union elbow — tube to tube

3rd generation

O.D.
TUBE

2nd generation
O.D.

QR3104

Previous QR
Part Number

Previous QR
Part Number

1/8

QR3102 53 00

5/32

QR3102 04 00

3102 54 00

3/16

QR3102 55 00

.43

.95

.28

1/4

QR3102 56 00

.43

.93

.14

5/16

QR3102 08 00

.53

1.16

.25

3/8

QR3102 60 00

.63

1.33

.95

1/2

QR3102 62 00

.95

1.67

1.23

H

L
2

oz

3102 58 00

tee — tube to tube to tube

3rd generation

O.D.
TUBE

2nd generation

Previous QR
Part Number

G
.42

.93

.73

.35

3104 54 00

.33

.75

.57

.14

1/8

QR3104 53 00

5/32

QR3104 04 00

3/16

QR3104 55 00

.43

.94

.73

.42

1/4

QR3104 56 00

.43

.93

.73

.49

5/16

QR3104 08 00

.53

1.16

.91

.32

3/8

QR3104 60 00

.63

1.33

1.015

1.48

1/2

QR3104 62 00

.95

1.67

1.20

2.08

3104 58 00

O.D.

QR3140

"Y" — tube to tube
O.D.
TUBE

A-10

Previous QR
Part Number

H

K

L

N

oz

5/32

QR3140 04 00 3140 54 00

.69

.34

1.12

.35

.14

5/16
3/8

QR3140 08 00
QR3140 60 00

1.10
1.30

.53
.63

1.77
2.09

.57
.67

.46
.52

Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

tube to tube fittings
QR3144
O.D.2

L

double "Y" — tube to tube
O.D.1

O.D.1 O.D.2
TUBE TUBE

H

L

N

oz

5/32

1/4

QR3144 54 56

.87

1.47

.43

1.1

5/32

5/32

QR3144 04 04

.86

1.40

.43

1.1

L1

L
2

N

T

oz

H N

QR3304

multiple tee with mounting holes
O.D.1 O.D.2
TUBE TUBE

H

1/4

5/32 QR3304 56 54 1.04

1.42

1.38

.43

.13

.81

1/4

1/4 QR3304 56 56 1.18

1.86

1.56

.55

.17

1.0

O.D.1
O.D.2

Numatics has a variety of plug-in accessories. Please refer to pages A-16 thru A-20.

Dimensions are fractional inch unless otherwise noted.

A-11

plug-in bulkhead fitting
QR3156

plug-in bulkhead union — tube to tube
O.D.
TUBE

L1

L2

T
O.D. G

QR3332

G

L1

L2

T
MIN

oz

.25

5/32

QR3156 04 00

.83

.26

1.08

.62

1/4

QR3156 56 00

.93

.26

1.24

.75

.39

5/16

QR3156 58 00

1.02

.30

1.28

.87

.53

3/8

QR3156 60 00

1.34

.30

1.63

1.12

1.09

1/2

QR3156 62 00

1.44

.30

1.71

1.25

1.34

demounting tool for removing pop-in bulkhead
O.D.
TUBE

plastic
O.D.

oz

5/32

QR3332 54 01

.14

1/4

QR3332 56 01

.14

5/16

QR3332 58 01

.18

3/8

QR3332 60 01

.28

1/2

QR3332 12 01

.32

O.D.
Required hole dimension.
Minimum centers between fittings.

ØT

5/32"

mm 15.87
in

N

5/8"

mm 22.5

1/4"
19.05
3/4"
25.5

5/16"
22.22
7/8"
27.5

3/8"
28.57
1 1/8"
34

1/2"
31.75
1 1/4"
38

ØT : +0.3 - 0.1

INSTALLATION

REMOVAL

1. Mark out the mounting hole.

2. Drill hole in panel.

1. Disconnect
the tube.
2. Put the removal tool
on the fitting.

3. Push the fitting into
the panel.

4. To identify circuits, simply
remove the green release button
and replace with a colored one.
(See model No. 3330)

3. Push the tool
over the fitting
to the bulkhead face.
4. Simply remove the fitting.

Numatics has a policy of continual product development and reserves the right to change dimensions or
specifications without prior notification.

A-12

Dimensions are fractional inch unless otherwise noted.

bulkhead
QR3186
L2

bulkhead union — tube to tube
O.D.
TUBE

L1
O.D.

K

T
F

F

F

K
MAX

L1

L2

T
MIN

oz

1/8

QR3186 53 00 9/16

.26

.25

1.07

.51

.67

5/32

QR3186 54 00 9/16

.26

.25

.99

.51

.67

3/16

QR3186 55 00 9/16

.26

.25

1.07

.51

1.23

1/4

QR3186 56 00 11/16

.28

.25

1.18

.59

1.02

5/16

QR3186 58 00 13/16

.28

.29

1.18

.71

1.16

3/8

QR3186 60 00

.47

.29

1.55

.91

2.96

1/2

QR3186 62 00 1-1/8

.51

.29

1.65

1.02

3.60

1

Dimensions are fractional inch unless otherwise noted.

A-13

plug-in fittings and multiple tee
QR3166

reducer

3rd generation

2nd generation

O.D.
TUBE O.D.2
1/8
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
3/16
1/4
1/4
1/4
5/16
5/16
5/16

5/32
3/16
1/4
3/16
1/4
5/16
3/8
1/4
5/16
1/4
5/16
3/8
1/2
3/8
1/2
1/2

Previous QR
Part Number
QR3166 53 04
QR3166 53 55
QR3166 53 56
QR3166 04 55
QR3166 04 56
QR3166 04 08
QR3166 54 60
QR3166 55 56
QR3166 55 08
QR3166 55 56
QR3166 56 08
QR3166 56 60
QR3166 56 62
QR3166 08 60
QR3166 08 62
QR3166 60 62

G

L

L1

3166 53 54 .43
.43
.40
3166 54 55 .335
3166 54 56 .335
3166 54 58 .335
.40
.43
3166 55 58 .43
.43
3166 56 58 .43
.43
.63
3166 58 60 .53
3166 58 62 .63
.63

1.79
1.79
1.37
1.48
1.48
1.48
1.63
1.44
1.79
1.79
1.61
1.61
1.97
1.93
2.01
2.01

.13
1.22
1.22
.826
.905
.748
.66
.60
1.06
1.22
.89
.81
.98
1.12
1.02
1.04

.11
.13
.15
.21
.25
.32
.39
.25
.23
.25
.53
.35
.38
.53
.53
.53

Previous QR
Part Number G

L

L1

oz

1.61
1.61
1.61

.965
1.14
1.00

.28
.32
.32

G

L

oz

.20
.25
.30
.38
.40
.48
.60

1.06
1.06
1.06
1.06
1.50
1.50
1.50

.04
.04
.05
.04
.07
.07
.08

oz

* See below

QR3168 expander
3rd generation

O.D.
TUBE O.D.2
1/4
1/4
1/4

2nd generation
L

1/8
5/32
3/16

QR3168 56 53
.43
QR3168 56 04 3168 56 54 .43
QR3168 56 55
.807

* See below

L1

G

QR3126

plug
O.D.
TUBE

L

G

O.D.

Plastic

A-14

1/8
5/32
3/16
1/4
5/16
3/8
1/2

Previous QR
Part Number
QR3126 53 00
QR3126 04 00
QR3126 55 00
QR3126 56 00 3126 56 00 85
QR3126 58 00
QR3126 60 00
QR3126 62 00

Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

plug-in fittings and multiple tee
QR3142

plug-in "Y" — male-tube

3rd generation

O.D.1 O.D.2
TUBE TUBE
1/8
5/32
5/32

1/8
5/32
1/4

H
.866
.87
.87

QR3142 53 00
QR3142 04 00
QR3142 54 56

L

L1

1.693 0.794
1.57 1.09
1.75 0.98

N

oz

.452
.45
.43

.29
.32
.46

* See below
2nd generation
L
O.D.1

L1

N
O.D.2
.43
H

QR3143 multiple plug-in "Y" — male tube
O.D.1

N
O.D.2

O.D.1 O.D.2
TUBE TUBE

L

5/32

1/4

QR3143 04 06

5/32

5/16

QR3143 04 08

1.88

L1

N

oz

1.10

.43

.95

1.81

1.13

.43

Previous QR
Part Number

L

L1

oz

3120 54 00 85

1.36
1.24
1.52
1.61
2.03

.47
.57
.57
.73
.81

.04
.07
.05
.07
.09

22

QR3120

double male union
O.D.
TUBE

O.D.

O.D.

Plastic

5/32
3/16
1/4
5/16
3/8

QR3120 04 00
QR3120 55 00 85
QR3120 56 00
QR3120 08 00
QR3120 60 00

3120 56 00 85
3120 58 00 85
3120 60 00 85

* 3rd generation accessories can be used with either
3rd generation or 2nd generation fittings. 2nd generation.
accessories can ONLY be used with 2nd generation fittings.

Shaded areas designate part numbers available from the 3rd Generation collection.
The 3rd generation hex is metric.
Dimensions are fractional inch unless otherwise noted.

A-15

tubing and accessories
QR3330 manual release buttons 3rd generation
O.D.
TUBE

white

black

green

red

blue

yellow

oz

1/8

QR3330 53 00

QR3330 53 01

QR3330 53 02

QR3330 53 03

QR3330 53 04

QR3330 53 05

.04

5/32

QR3330 04 00

QR3330 04 01

QR3330 04 02

QR3330 04 03

QR333004 04

QR3330 04 05

.04

3/16

QR3330 55 00

QR3330 55 01

QR3330 55 02

QR3330 55 03

QR3330 55 04

QR3330 55 05

.04

1/4

QR3330 56 00

QR3330 56 01

5/16

QR3330 08 00

3/8

QR3330 60 00

1/2

QR3330 62 00

QR3330 62 01

QR3330 56 02

QR3330 56 03

QR3330 56 04

QR3330 56 05

.04

QR3330 08 02

QR3330 08 03

QR333008 04

QR3330 08 05

.04

QR3330 60 02

QR3330 60 03

QR3330 60 04

QR3330 60 05

.04

QR3330 62 02

QR3330 62 03

QR3330 62 04

QR3330 62 05

.04

Numatics manual release buttons are supplied in package quantities
of 100.
QR3000 fittings are supplied standard, with green manual release
buttons for easy disconnect.
REMOVABLE on 1/8, 5/32, 1/4, 3/16, and 1/2 sizes, these release
buttons help for the identification of circuits:
Replace the green release button with a button of another color. On
5/16 and 3/8 sizes, colored buttons fit over the green release button.
6 colors are available which allow a color coding to be used on
circuits, in association with the tubes of the same color.

A-16

tubing and accessories
Fractional nylon 11 tubing
application
Flexible nylon tubing used for air and lubrication lines, instrumentation and process lines for chemicals and solvents. Contact factory for specific applications.

features
Has excellent resistance to a wide range of chemicals including
petroleum products, soaps, salt solutions and bases.

specifications
Temperature Range: -60° to 200° F

O.D. I.D.

QRTN

Wall

Min. Min.
Coil/Reel
Burst Bend
Length
(PSI) Radius (Feet)

1/8

.093

QRTN12_ _

.017

1000

3/8”

5/32

.106

QRTN16_ _

.025

1000

1/2”

3/16

.138

QRTN19_ _

.024

1000

5/8”

1/4

.180

QRTN25_ _

.035

1000

1”

5/16

.232

*QRTN31_ _ .040

1000

1 1/4”

3/8

.275

QRTN38_ _

.050

1000

1 1/2”

1/2

.375

*QRTN50_ _ .062

1000

2”

For fractional tube clips, see page A-20.

I.D. O.D.

Size
Inches or MM

@75°F

1/8x.093
5/32x.106
3/16x.138
1/4x.180
5/16x.232
3/8x.275
1/2x.375

225
275
225
250
220
220
200

Working Pressure (PSI)
@100°F @125°F @150°F
168
200
158
183
170
165
145

133
169
120
160
141
148
133

125
160
113
140
121
128
125

100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’ Reel

available colors
Natural (NA), Black (BK), Red (RD), Green (GN), Blue (BU), Yellow
(YW)

how to order
Complete the model number with the desired tube color and
length.
P/N Example: QRT N 12 GN 100’
Length
Color
Tube Size
Material: (N) = Nylon

A-17

tubing and accessories
fractional low density polyethylene tubing
application
Low density polyethylene tubing has a wide range of uses including waterlines, beverage tubing, air lines, instrumentation, plus
uses in industrial, agricultural and chemical applications.

features
Good chemical resistance to alkalis, dilute acid, ammonia gas,
ammonium hydroxide, brine water and most aqueous solutions of
metallic salts.

specifications
Natural compuond meets the Food and Drug Administration Code
of Federal Regulations, Title 21, Part 177.1520(c) 2.1 for a resin
which may not be processed for use involving contact with human
food.
Temperature Range: -60° to 175° F

For fractional tube clips, see page A-20.

O.D. I.D.

QRTE

Wall

Min. Min.
Coil/Reel
Burst Bend
Length
(PSI) Radius (Feet)

1/8

.062

QRTE12_ _

.020

400

1”

5/32

.106

QRTE16_ _

.025

400

1”

1/4

.170

QRTE25_ _

.040

400

1”

5/16

.188

QRTE31_ _

.062

600

1 1/8”

3/8

.250

QRTE38_ _

.062

400

1 1/4”

1/2

.375

QRTE50_ _

.062

300

2 1/2”

I.D. O.D.

100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’ Reel
100’ Coil
500’ Reel
100’ Coil
250’ Reel

available colors
Natural (NA), Black (BK), Red (RD), Green (GN), Blue (BU), Yellow (YW)
* NOTE: 5/32 is not available in yellow, 5/16 is not available in
green or yellow.)

how to order
Complete the model number with the desired tube color and
length.
P/N Example: QRT E 12 GN 100’
Length
Color (see note above)
Tube Size
Material: (E) = Low Density Polyethylene

A-18

Dimensions are fractional inch unless otherwise noted.

tubing and accessories
fractional polyurethane 95 tubing
application
Polyurethane tubing is ideal for compressed air systems and vacuum applications

features
Has excellent abrasion resistance and shape retention while working in high humidity and low temperatures. Withstands salt water.
Ages well. Good vibration absorption. Excellent tear resistance.

specifications
Temperature Range: -4° to 160° F

For fractional tube clips, see page A-20.

I.D. O.D.

O.D. I.D.

QRTU

Wall

Min. Min.
Coil/Reel
Burst Bend
Length
(PSI) Radius (Feet)

1/8

.066

QRTU12_ _

.031

800

1”

5/32

.093

QRTU16_ _

.031

600

1”

3/16

.107

QRTU19_ _

.062

400

1”

1/4

.160

QRTU25_ _

.045

400

1 1/8”

5/16

.216

QRTU31_ _

.062

400

1 1/8”

3/8

.250

QRTU38_ _

.062

400

1 1/4”

1/2

.320

QRTU50_ _

.062

400

1 1/2”

100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’-1000’ Reel
100’ Coil
500’ Reel
100’ Coil
500’ Reel
100’ Coil
250’ Reel

available colors
Clear (CL), Black (BK), Red (RD), Green (GN), Blue (BU), Yellow (YW)
NOTE: 3/16 is available in clear and black only.

how to order
Complete the model number with the desired tube color and
length.
P/N Example: QRT U 12 GN 100’
Length
Color (see note above)
Tube Size
Material: (U) = Polyurethane

Inches or MM

Size

Tolerance
inches

@75°F

1/8x1/16
5/32x3/32
3/16x.107
1/4x.160
5/16x.216
3/8x1/4
1/2x.320

±.005
±.005
±.005
±.005
±.005
±.005
±.005

233
176
148
148
133
147
140

Working Pressure (PSI)
@100°F @125°F @150°F
186
141
118
118
106
117
112

151
114
96
96
86
95
91

117
88
74
74
67
73
70

Weight
lbs/100’
0.5
0.7
1.5
1.5
3.9
3.4
5.1

A-19

tubing and accessories
QRCLIP

tubing clips 3rd generation

Product Range
6 models including 3 to clip either tubing or Numatics QR3000 3rd generation fittings as follows:

PART
NUMBER

number of
clips per strip

tube size
to clip

QR3000 3g
fitting to clip

number of
clips per box
(min. order qty.)

CLIP 0400

8 clips

4mm (5/32)

—

5

CLIP 06 00

8 clips

6mm (1/4, 3/16)

—

5

CLIP 08 00

7 clips

8mm (5/16)

4mm (5/32)

5

CLIP 10 00

6 clips

10mm (2/8)

6mm (1/4)

5

CLIP 12 00

5 clips

12mm (1/2)

—

5

CLIP 14 00

4 clips

14mm

8mm (5/16)

5

Characteristics of the new clip
Material: Black Nylon 12
Mounting Screw: At least one self-tapping screw per clip is provided in each package. Same
screw for all clip sizes (9.5mm length).
Quantity of screws per box: 20 minimum to 40 maximum.

QR300071

tube cutter

H
L

This tool will cut all plastic tubes (e.g. nylon, teflon,
polyurethane, braided polyethylene, soft rubber, etc.)
from 1/8” to 1/2” diameter inclusive. It is designed to
give a clean cut at right angles to tube axis. A spring
maintains the cutter in the closed position.
Replacement blades are available.

Model No.

Height

Length

QR3000 71 00

.98

3.11

Blades No.: QR3000 71 05 (Sold in packages of two)

A-20

Dimensions are fractional inch unless otherwise noted.

brass adaptors
QR0121 double male adaptors — NPT to BSPT
F

L

q

.43

.75

.32

QR0121 14 13

.55

1.06

.74

QR0121 18 17

.67

1.10

.88

1/2

QR0121 22 21

.87

1.42

1.8

3/4

QR0121 28 27

1.06

1.57

3.1

E

F

L

q

.30

.55

.79

.53

C
NPT

C
BSPT

1/8

1/8

QR0121 11 10

1/4

1/4

3/8

3/8

1/2
3/4

oz

QR0164 male/female adaptors — NPT to BSPP

BSPP
NPT

QR0167

C
BSPP

1/8

1/8

QR0164 11 10

oz

1/4

1/4

QR0164 14 13

.43

.67

1.08

.99

3/8

3/8

QR0164 18 17

.45

.87

1.12

1.5

1/2

1/2

QR0164 22 21

.59

1.06

1.44

2.8

3/4

3/4

QR0164 28 27

.65

1.26

1.52

3.9

E

F

L

q

.31

.55

.83

.56

male/female adaptors — BSPT to NPT

NPT
BSPT

C
NPT

C
BSPT

C
NPT

1/8

1/8

QR0167 10 11

1/4

1/4

QR0167 13 14

.45

.67

1.12

1.0

3/8

3/8

QR0167 17 18

.47

.87

1.16

1.6

oz

1/2

1/2

QR0167 21 22

.61

1.06

1.48

3.0

3/4

3/4

QR0167 27 28

.67

1.26

1.56

4.2

Dimensions are fractional inch unless otherwise noted.

A-21

threaded fittings
QR3175

tube to male BSPT

3rd generation

nickel plated brass

2nd generation

brass

QR3101

nickel plated brass

2nd generation

brass

F1

F2

H

K

q
oz

4
4

1/8 QR3175 04 10
1/4 QR3175 04 13

10
14

3
3

9.5
6.5

11
15

.21
.45

6
6

1/8 QR3175 06 10
1/4 QR3175 06 13

10
14

4
4

11.5
8.5

11
15

.17
.38

8
8
8

1/8 QR3175 08 10
1/4 QR3175 08 13
3/8 QR3175 08 17

13
14
17

5
6
6

20
17
13

14
15
18.5

.35
.42
.52

10
10
10

1/4 QR3175 10 13
3/8 QR3175 10 17
1/2 QR3175 10 21

16
17
21

7
8
8

20
16.5
14

17.5
18.5
23

.59
.77
1.1

12
12
12

1/4 QR3175 12 13
3/8 QR3175 12 17
1/2 QR3175 12 21

19
19
21

7
9
10

26.5
24
19.5

21
21
23

2.2
2.4
2.2

14
14

3/8 QR3175 14 17
1/2 QR3175 14 21

22
22

9
11

28
24.5

24
24

2.0
2.1

male connector tube to BSPP or M5 thread

3rd generation

O.D.
O.D.
O.D.

O.D. C
TUBE BSPT

O.D. C
TUBE BSPP/M5

F1

F2

E

H

K

q
oz

4
4
4

M5
1/8
1/4

QR3101 04 19 8
QR3101 04 10 13
QR3101 04 13 16

2.5
3
3

3.5
5
5.5

14
11.5
10.5

9
14
17.5

.10
.24
.38

6
6
6

M5
1/8
1/4

QR3101 06 19 10
QR3101 06 10 13
QR3101 06 13 16

2.5
4
4

3.5
5
5.5

16
13
12.5

11
14
17.5

.14
.24
.38

8
8
8

1/8
1/4
3/8

QR3101 08 10 13
QR3101 08 13 16
QR3101 08 17 20

5
6
6

5
5.5
5.5

21
19.5
18

14
17.5
22

.24
.59
.74

10
10
10

1/4
3/8
1/2

QR3101 10 13 16
QR3101 10 17 20
QR3101 10 21 24

7
8
8

5.5
5.5
7.5

23
16.5
18.5

17.5
22
26

.59
.74
1.1

12
12
12

1/4
3/8
1/2

QR3101 12 13 19
QR3101 12 17 20
QR3101 12 21 24

7
9
10

5.5
5.5
7

27.5
27
22.5

21
21
26

1.1
1.2
2.5

14
14

3/8
1/2

QR3101 14 17 22
QR3101 14 21 24

9
11

8
9.5

30
26.5

24
26

1.9
2.3

Shaded areas designate part numbers available from the 3rd Generation collection.
Numatics has a policy of continual product development and reserves the right to change dimensions or
specifications without prior notification.

A-22

Dimensions are in millimeters unless otherwise noted.

threaded fittings
QR3114

straight female connector tube to BSPP or M5 thread

3rd generation

QR3148

F

H

q
oz

4
4
4

M5
1/8
1/4

QR3114 04 19
QR3114 04 10
QR3114 04 13

6.5
9.5
13.5

8
13
16

19.5
22.5
26.5

.176
.352
.564

6
6

1/8
1/4

QR3114 06 10
QR3114 06 13

9.5
13.5

13
16

24.5
28.5

.388
.564

8
8

1/8
1/4

QR3114 08 10
QR3114 08 13

9.5
13.5

13
16

29
33

.705
.952

10

3/8

QR3114 10 17

14

19

36

1.410

12
12

3/8
1/2

QR3114 12 17
QR3114 12 21

14
19.5

19
24

40
45.5

3.245
4.021

F

H

K

L

N

q

O.D. C
TUBE BSPT

oz

4
4

1/8 QR3148 04 10
1/4 QR3148 04 13

10
14

32.5
33

8.5
8.5

17.5
17.5

9
9

.352
.634

6
6

1/8 QR3148 06 10
1/4 QR3148 06 13

10
14

39.5
40

10.5
10.5

21.5
21.5

11
11

.423
.670

8
8

1/8 QR 3148 08 10
1/4 QR3148 08 13

13
14

56.5
55.5

13.5
13.5

28
28

14.5
14.5

1.164
1.305

K

L

N

q

"Y" tube to male BSPP thread

3rd generation

E

E

"Y" tube to male BSPT

3rd generation

QR3158

O.D.
C
TUBE BSPP/M5

O.D.
C
TUBE BSPP

E

F

H

oz

4
4
4

M5 QR3158 04 19 3.5 8
1/8 QR3158 04 10 5 13
1/4 QR3158 04 13 5.5 16

32.5 8.5
32 8.5
32 8.5

17.5
17.5
17.5

9
9
9

.35
.352
.529

6
6
6

M5 QR3158 06 19 3.5 10
1/8 QR3158 06 10 5 13
1/4 QR3158 06 13 5.5 16

39.5 10.5
39 10.5
39 10.5

21.5
21.5
21.5

11
11
11

.39
.493
.670

8
8

1/8 QR3158 08 10 5 13
1/4 QR3158 08 13 5.5 16

28
28

14.5
14.5

1.164
1.375

56
55

13.5
13.5

All QR3000 fittings with parallel BSP and M5 threads are supplied complete with a pre-assembled nylon sealing washer. This permits the
instant assembly of the fitting without preparation of the thread and provides a fixed assembled height to the fitting.

Shaded areas designate part numbers available from the 3rd Generation collection.

Dimensions are in millimeters unless otherwise noted.

A-23

threaded fittings
QR3109

male elbow — tube to BSPT

3rd generation

2nd generation
O.D.

QR3129

O.D. C
TUBE BSPT

F

G

H

L

q
oz

4
4

1/8 QR3109 04 10
1/4 QR3109 04 13

10
14

8.5
8.5

13.5
14

14
14

.211
.493

6
6

1/8 QR3109 06 10
1/4 QR3109 06 13

10
14

10.5
10.5

15.5
16

16
16

.211
.529

8
8
8

1/8 QR3109 08 10
1/4 QR3109 08 13
3/8 QR3109 08 17

10
14
17

13.5
13.5
13.5

19
18
18

23
23
23

.458
.529
.634

10
10
10

1/4 QR3109 10 13
3/8 QR3109 10 17
1/2 QR3109 10 21

15
17
21

16
16
16

22
22
22

26.5
26.5
26.5

.564
.670
.670

12
12
12

1/4 QR3109 12 13
3/8 QR3109 12 17
1/2 QR3109 12 21

15
17
21

19
19
19

25
25
25

31
31
31

2.504
2.610
3.245

14
14

3/8 QR3109 14 17
1/2 QR3109 14 21

24
24

25.5
25.5

51
51

33.5
33.5

3.209
3.351

F

G

H

L

q

extended male elbow — tube to BSPT

3rd generation

2nd generation

O.D. C
TUBE BSPT

oz

4
4

1/8 QR3129 04 10
1/4 QR3129 04 13

10
14

8.5
8.5

23
23.5

19
19

.740
1.340

6
6

1/8 QR3129 06 10
1/4 QR3129 06 13

10
14

10.5
10.5

27
27.5

22.5
22.5

1.305
1.552

8
8
8

1/8 QR3129 08 10
1/4 QR3129 08 13
3/8 QR3129 08 17

13
14
17

13.5
13.5
13.5

33.5
32.5
33

29.5
29.5
29.5

.881
.917
1.234

10
10

1/4 QR3129 10 13
3/8 QR3129 10 17

15
17

16
16

39.5
39.5

34.5
34.5

1.09
1.446

E

F

G

H

L

q

O.D.

QR3199

male elbow tube to BSPP or M5

3rd generation

2nd generation
O.D.

O.D. C
TUBE BSPP/M5
4
4
4

M5
1/8
1/4

QR3199 04 19 3.5
QR3199 04 10 5
QR3199 04 13 5.5

8
13
16

8.5
8.5
8.5

13.5
13
13

14
14
14

.105
.246
.423

6
6
6

M5
1/8
1/4

QR3199 06 19 3.5
QR3199 06 10 5
QR3199 06 13 5.5

8
13
16

10.5
10.5
10.5

15.5
15
15

16
16
16

.529
.282
.458

8
8
8

1/8
1/4
3/8

QR3199 08 10 4.5
QR3199 08 13 5.5
QR3199 08 17 5.5

13
16
20

13.5
13.5
13.5

20.5
18.5
18.5

23
23
23

.493
.599
.811

10
10
10

1/4
3/8
1/2

QR3199 10 13 5.5
QR3199 10 17 5.5
QR3199 10 21 7.5

16
20
24

16
16
16

23.5
22
22

26.5
26.5
26.5

1.022
1.164
1.269

12
12
12

1/4
3/8
1/2

QR3199 12 13 5.5
QR3199 12 17 5.5
QR3199 12 21 7

16
20
24

19
19
19

26.5
25
25

31
31
31

2.433
2.433
3.174

14
14

3/8
1/2

QR3199 14 17 8
QR3199 14 21 9.5

24
27

25.5
25.5

53
54

33.5
33.5

3.06
3.421

Shaded areas designate part numbers available from the 3rd Generation collection.

A-24

oz

Dimensions are in millimeters unless otherwise noted.

threaded fittings and banjos
QR3169

extended male stud elbow, BSPP and M5 thread
O.D. C
TUBE BSPP/M5
4
4
4
6
6
6
8
8
8
10

M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
3/8

QR3169 04 19
QR3169 04 10
QR3169 04 13
QR3169 06 19
QR3169 06 10
QR3169 06 13
QR3169 08 10
QR3169 08 13
QR3169 08 17
QR3169 10 17

E

F

G

H

L

q

3.5
5
5.5
3.5
5
5.5
4.5
5.5
5.5
5.5

8
13
16
10
13
16
13
16
20
20

8.5
8.5
8.5
10.5
10.5
10.5
13.5
13.5
13.5
16

23
23
23
26.5
26.5
26.5
35
33
33
40.5

19
19
19
22.5
22.5
22.5
29.5
29.5
29.5
34.5

0.25
0.32
0.49
0.32
0.42
0.60
0.88
0.92
1.23
1.41

oz

Shaded areas designate part numbers available from the 3rd Generation collection.
Dimensions are in millimeters unless otherwise noted.

A-25

threaded fittings
QR3108 male branch tee — tube to BSPT
3rd generation

2nd generation
O.D.

QR3103

O.D. C
TUBE BSPT

F

G

H

L
2

q

4
4

1/8 QR3108 04 10
1/4 QR3108 04 13

10
14

8.5
8.5

15.5
16

14
14

.246
.529

6
6

1/8 QR3108 06 10
1/4 QR3108 06 13

10
14

10.5
10.5

17.5
18

16
16

.317
.599

8
8
8

1/8 QR3108 08 10
1/4 QR3108 08 13
3/8 QR3108 08 17

10
14
17

13.5
13.5
13.5

22
21
21

23
23
23

.564
.670
.705

10
10
10

1/4 QR3108 10 13
3/8 QR3108 10 17
1/2 QR3108 10 21

15
17
21

16
16
16

24
24
24

26.5
26.5
26.5

.740
.846
.987

12
12
12

1/4 QR3108 12 13
3/8 QR3108 12 17
1/2 QR3108 12 21

15
17
21

19
19
19

27
27
27

31
31
31

3.315
3.245
3.844

14
14

3/8 QR3108 14 17
1/2 QR3108 14 21

24
24

25.5
25.5

51
51

33.5
33.5

3.985
4.021

F

G

H

H1

L

q

male run tee — tube to BSPT

3rd generation

2nd generation

O.D.

QR3198
3rd generation

2nd generation

O.D. C
TUBE BSPT

oz

4
4

1/8 QR3103 04 10
1/4 QR3103 04 13

10
14

8.5
8.5

23.5
24

9
9.5

14.5
14.5

.246
.352

6
6

1/8 QR3103 06 10
1/4 QR3103 06 13

10
14

10.5
10.5

27.5
28

10
10.5

17.5
17.5

.317
.599

8
8
8

1/8 QR3103 08 10
1/4 QR3103 08 13
3/8 QR3103 08 17

10
14
17

13.5
13.5
13.5

35
34
34

12
11
11

23
23
23

.564
.670
.705

10
10
10

1/4 QR3103 10 13
3/8 QR3103 10 17
1/2 QR3103 10 21

15
17
21

16
16
16

40.5
40.5
40.5

14
14
14

26.5
26.5
26.5

.740
.846
.987

12
12
12

1/4 QR3103 12 13
3/8 QR3103 12 17
1/2 QR3103 12 21

15
17
21

19
19
19

46.5
46.5
46.5

15.5
15.5
15.5

31
31
31

3.315
3.245
4.021

14
14

3/8 QR3103 14 17
1/2 QR3103 14 21

24
24

25.5
25.5

71.5
71.5

38
38

33.5
33.5

3.985
4.021

male branch tee — tube to BSPP or M5
O.D. C
TUBE BSPP/M5

E

F

G

H

L
2

q
oz

4
4
4

M5
1/8
1/4

QR3198 04 19 3.5
QR3198 04 10 5
QR3198 04 13 5.5

8
13
16

8.5
8.5
8.5

17.5
15
15

14
14
14

.14
.28
0.458

6
6
6

M5
1/8
1/4

QR3198 06 19 3.5
QR3198 06 10 5
QR3198 06 13 5.5

8
13
16

10.5
10.5
10.5

19.5
17
17

16
16
16

0.211
.52
.52

8
8
8

1/8
1/4
3/8

QR3198 08 10 4.5
QR3198 08 13 5.5
QR3198 08 17 5.5

13
16
20

13.5
13.5
13.5

23.5
21.5
21.5

23
23
23

.59
.70
.811

10
10
10

1/4
3/8
1/2

QR3198 10 13 5.5
QR3198 10 17 5.5
QR3198 10 21 7.5

16
20
24

16
16
16

26
24
24

26.5
26.5
26.5

.74
.84
1.375

12
12
12

1/4
3/8
1/2

QR3198 12 13 5.5
QR3198 12 17 5.5
QR3198 12 21 7

16
20
24

19
19
19

29
27
27

31
31
31

3.104
2.857
3.245

14
14

3/8
1/2

QR3198 14 17 8
QR3198 14 21 9.5

24
27

25.5
25.5

53
54

32.5
32.5

3.8
4.2

Shaded areas designate part numbers available from the 3rd Generation collection.

A-26

oz

Dimensions are in millimeters unless otherwise noted.

tube to tube fittings
QR3106

union — tube to tube

3rd generation

O.D.
TUBE

2nd generation
O.D.

L

G

L

q
oz

4

QR3106 04 00

8.5

25

.07

6

QR3106 06 00

10.5

28.5

.14

8

QR3106 08 00

13.5

38

.24

10

QR3106 10 00

16

42

.31

12

QR3106 12 00

19

50.5

.53

14

QR3106 14 00

25.5

53

1.5

G

QR3106

unequal union — tube to tube
O.D.1 O.D.2
TUBE TUBE

L

O.D.1 G 1

QR3102

G2

O.D.2

G2

L

q
oz

4
4

6
8

QR3106 04 06
QR3106 04 08

8.5
16

11
16

28
47

.282
.352

6
6

8
10

QR3106 06 08
QR3106 06 10

16
21

16
21

48
49

.423
.634

8

10

QR3106 08 10

21

21

49

.705

G

L

q

union elbow — tube to tube

3rd generation

O.D.
TUBE

2nd generation
L

G1

O.D.

oz

4

QR3102 04 00

8.5

19

.07

6

QR3102 06 00

10.5

22.5

.14

8

QR3102 08 00

13.5

29.5

.24

10

QR3102 10 00

16

34.5

.52

12

QR3102 12 00

19

40.5

.60

14

QR3102 14 00

25.5

46.5

1.5

G

H

L
2

G

QR3104

tee — tube to tube

3rd generation

O.D.
TUBE

q
oz

4

QR3104 04 00

8.5

19

14.5

.141

6

QR3104 06 00

10.5

22.5

17.5

.211

8

QR3104 08 00

13.5

29.5

23

.317

10

QR3104 10 00

16

34.5

26.5

.493

12

QR3104 12 00

19

40.5

31

.67

14

QR3104 14 00

25

26

33.5 2.363

2nd generation
O.D.

Shaded areas designate part numbers available from the 3rd Generation collection.
Dimensions are in millimeters unless otherwise noted.

A-27

tube to tube fittings
QR3140

"Y" — tube to tube
O.D.1 O.D.2
TUBE TUBE
4
4
6
6
8
8
10

QR3144
O.D.2

4
6
6
8
8
10
10

QR3140 04 00
QR3140 04 06
QR3140 06 00
QR3140 06 08
QR3140 08 00
QR3140 08 10
QR3140 10 00

H

K

L

N

q

17.5
17.5
21.5
22.5
28
28
33

8.5
10.5
10.5
13.5
13.5
16
16

28.5
33
35
41
45
47
53

9
9
11
11.5
14.5
14.5
17

.14
.18
.25
.67
.46
.53
.71

H

L

N

q

22
22

35.5
36

11
11

.952
1.12

double "Y" — tube to tube
O.D.1

O.D.1 O.D.2
TUBE TUBE
4
4

6
4

QR3144 04 06
QR3144 04 04

Shaded areas designate part numbers available from the 3rd Generation collection.

A-28

oz

Dimensions are in millimeters unless otherwise noted.

oz

plug-in bulkhead fitting
QR3156

plug-in bulkhead union
O.D.
TUBE

O.D.

min. - 1 mm
max. - 4 mm

G

L1

T

L2

MIN.

q
oz

4

QR3156 04 00

21

6.5

27.5

15.87

.25

6

QR3156 06 00

23.5

6.5

31.5

19.05

.39

8

QR3156 08 00

26

7.5

32.5

22.22

.53

10

QR3156 10 00

34

7.5

41.5

28.57

1.09

12

QR3156 12 00

36.5

7.5

43.5

31.75

1.34

Fittings are supplied complete with collar.

QR3332

demounting tool for bulkhead connectors

q

O.D.
TUBE
O.D.

oz

4

QR3332 04 01

.14

6

QR3332 06 01

.14

8

QR3332 08 01

.18

10

QR3332 10 01

.28

12

QR3332 12 01

.32

INSTALLATION

REMOVAL

1. Mark out the mounting hole.

2. Drill hole in panel.

1. Disconnect
the tube.
2. Put the removal tool
on the fitting.

3. Push the fitting into
the panel.

3. Push the tool
over the fitting
to the bulkhead face.

4. To identify circuits, simply
remove the black release button
and replace with a colored one.
(See model No. 3330)

4. Simply remove the fitting.

O.D.
Diameter of fixing hole.

ØT

Minimum distance between fittings.

N

mm
in
mm

4
15.87
5/8"
22.5

6
19.05
3/4"
25.5

8
22.22
7/8"
27.5

10
28.57
1-1/8"
34

12
31.75
1-1/4"
38

ØT : +0.3 - 0.1

Dimensions are in millimeters unless otherwise noted.

A-29

plug-in fittings and accessories
QR3166

reducer
O.D.1 O.D.2
TUBE TUBE

O.D.2

QR3168

O.D.1

4
4
4
6
6
6
6
8
8
8
10
10
12

6
8
10
8
10
12
14
10
12
14
12
14
14

QR3166 04 06
QR3166 04 08
QR3166 04 10
QR3166 06 08
QR3166 06 10
QR3166 06 12
QR3166 06 14
QR3166 08 10
QR3166 08 12
QR3166 08 14
QR3166 10 12
QR3166 10 14
QR3166 12 14

6

QR3126

4

QR3168 06 04

L1

q

12
8.5
12
10.5
14.5
14.5
14.5
13.5
13.5
17
21.5
21.5
23.5

39
37.5
44
37.5
44
46
48
49
49
48
56.5
58.5
58.5

22.5
19
22.5
20
22.5
23
23
28.5
24.5
23
33.5
33.5
33.5

.14
.14
.18
.14
.21
.25
.28
.32
.35
.35
.67
.70
.81

G

L

L1

q

10.5

35

23

.10

G

L

L1

q

4
8
10
12
14
16

30
33
33
42
45
49

15.5
16.5
17.5
21
22
23.5

.035
.035
.070
.10
.14
.18

oz

plug

4
6
8
10
12
14

QR3126 04 00
QR3126 06 00
QR3126 08 00
QR3126 10 00
QR3126 12 00
QR3126 14 00

Shaded areas designate part numbers available from the 3rd Generation collection.

A-30

oz

O.D.1

O.D.
TUBE

O.D.

L

expander
O.D.1 O.D.2
TUBE TUBE

O.D.2

G

Dimensions are in millimeters unless otherwise noted.

oz

plug-in fittings
QR3142

"Y" — male tube
O.D.1 O.D.2
TUBE TUBE

H

L

L1

N

q
oz

4

4

*QR3142 04 00

17.5

37

25

9

.15

4

6

*QR3142 04 06

17.5

38

25

9

.17

L

L1

N

q

* Plastic

QR3143

multiple plug-in "Y" — male tube
O.D.1

O.D.1 O.D.2
TUBE TUBE
N
O.D.2

oz

4

6

QR3143 04 06

48

34

8.5

.68

4

8

QR3143 04 08

48

34

8.5

.69

L

L1

q

QR3120 04 00

1.36

.47

3.53

22

QR3120

double male union
O.D.
TUBE

all plastic

4

O.D.

QR3170

O.D.

6

QR3120 06 00

1.52

.55

3.53

8

QR3120 08 00

1.61

.73

7.05

10

QR3120 10 00

2.03

.81

.11

12

QR3120 12 00

2.38

.90

.14

14

QR3120 14 00

2.54

.98

.18

G

L

q

.45

1.87

.18

one-handed disconnect fitting
O.D.
TUBE
4

O.D.

oz

QR3170 04 00

oz

O.D.

Shaded areas designate part numbers available from the 3rd Generation collection.
Dimensions are in millimeters unless otherwise noted.

A-31

accessories
QR3330

manual release buttons
O.D.
TUBE

white

4
6
8
10
12
14

black

green

red

blue

q
oz

yellow

QR3330 04 00 QR3330 04 01 QR3330 04 02 QR3330 04 03 QR3330 04 04 QR3330 04 05

3.53

QR3330 06 00 QR3330 06 01 QR3330 06 02 QR3330 06 03 QR3330 06 04 QR3330 06 05

3.53

QR3330 08 00 QR3330 08 01 QR3330 08 02 QR3330 08 03 QR3330 08 04 QR3330 08 05

3.53

QR3330 10 00 QR3330 10 01 QR3330 10 02 QR3330 10 03 QR3330 10 04 QR3330 10 05

3.53

QR3330 12 00 QR3330 12 01 QR3330 12 02 QR3330 12 03 QR3330 12 04 QR3330 12 05

3.53

QR3330 14 00 QR3330 14 01 QR3330 14 02 QR3330 14 03 QR3330 14 04 QR3330 14 05

3.53

Numatics manual release buttons are supplied in package quantities of 100.
QR3000 fittings are supplied standard, with black manual release buttons for easy disconnect. Removable
on 4mm and 6mm sizes, these release buttons help for the identification of the circuits:
Replace the black release button with a button of another color. On 8mm+ sizes, colored buttons fit over the
black release button.
6 colors are available which allow a color coding to be used on circuits, in association with the tubes of the
same color.

cartridges
cartridges for the integration of the QR3000 instant connection into components
Economy and compactness are two important benefits afforded by the application of Numatics cartridge
inserts. The cartridge is made up of an outer sleeve, a slotted collet, washer and an o-ring assembled to a carrier pin. The carrier pin maintains the component assembly and acts as an insertion guide. This complete
assembly is press fit into a cavity using a form tool. Once assembled, the carrier pin is discarded and the tubing is inserted.
Using cartridges offers application advantages not available with most threaded connectors. Please consult
Numatics for specific information about these products and assembly data. We work closely with customers on
cartridge applications as well as the manufacture of molded components with preassembled cartridges.

cartridge pin
tubing
CAVITY
sleeve
collet
washer
(optional)
o-ring

ØA
P

M
L

ØB

r

ØC
ØS

A-32

DIMENSIONS (in inches)
ØA ØB ØC ØS L
M
P
+.002 +.002 ±.002
+.012 +.010 +.006
-.000 -.000
-.000 -.000 -.000
4mm
.327 .283 .165 .130 .472 .386 .295
5mm
.366 .327 .205 .146 .551 .433 .335
6mm
.406 .366 .244 .157 .551 .433 .335
8mm
.484 .445 .323 .236 .571 .461 .335
10mm .650 .606 .402 .315 .748 .630 .453
12mm .728 .685 .480 .394 .787 .669 .492
14mm .787 .728 .559 .472 .866 .709 .539
1/8
.307 .244 .132 .079 .472 .378 .295
5/32
.327 .283 .165 .130 .472 .386 .295
3/16
.335 .307 .197 .138 .472 .386 .295
1/4
.413 .382 .258 .177 .551 .433 .335
3/8
.650 .583 .382 .295 .748 .630 .453
1/2
.748 .709 .508 .394 .787 .669 .492

O.D.
SIZE

R E MIN.

Dimensions are in millimeters unless otherwise noted.

R

r

E
MIN

.016
.020
.020
.024
.028
.031
.031
.016
.016
.016
.020
.028
.031

.012
.016
.016
.016
.016
.020
.020
.012
.012
.012
.016
.016
.020

.039
.039
.059
.059
.059
.079
.079
.039
.039
.039
.059
.059
.079

tubing and accessories
metric polyurethane 95 tubing
application
Polyurethane metric tubing is ideal for compressed air systems
and vacuum (28”Hg.) applications. Our 95 durometer hydrolyticaly
stable ether based compounds offer optimum strength and wall
rigidity needed for most brands of metric push-to-connect fittings.

features
• Excellent memory
• High compression strength
• Low compression set
• Extreme flexibility
• Very kink resistant
• Low gas and vapor permeability
• Naturally transparent, yet easily colored
• Good resistance to fuels and oils
• Vacuum rating for all sizes + 28” Hg.

specifications
For metric tube clips, see page A-34.

I.D. O.D.

Temperature Range: -40° to 165° F

Min. Min.
Coil/Reel
Burst Bend
Length
(PSI) Radius (Feet)

O.D. I.D.

QRMU

4

2.4

QRMU04_ _ .085

1800

14 mm

6

4.0

QRMU06_ _ 1.00

1200

21 mm

8

5.0

QRMU08_ _ 1.00

800

28 mm

10

6.5

QRMU10_ _ 1.25

800

35 mm

12

8.0

*QRMU12_ _ 1.50

800

45 mm

Wall

100’ Box
400’-1000’ Reel
100’ Box
500’-1000’ Reel
100’ Box
500’ Reel
50’ Box
500’ Reel
50’ Coil
250’ Reel

available colors
Black (BK), Red (RD), Green (GN), Blue (BU), Yellow (YW), White
(YW)
NOTE: All colors are opaque.

how to order
Complete the model number with the desired tube color and
length.
P/N Example: QRM U 12 GN 100’
Length
Color
Tube Size
Material: (U) = Polyurethane
Metric

Size
Metric

Tolerance
inches

4.0x2.4
6.0x4.0
8.0x5.0
10.0x6.5
12.0x8.0

±.005
±.005
±.005
±.005
±.005

@75°F
120
127
147
143
120

Working Pressure (PSI)
@100°F @125°F @150°F
97
93
117
120
93

70
60
87
90
80

50
50
80
67
57

Weight
lbs/100’
0.7
1.3
2.6
3.9
5.3

A-33

tubing and accessories
QRCLIP

tubing clips 3rd generation

Product Range
6 models including 3 to clip either tubing or Numatics QR3000 3rd generation fittings as follows:

PART
NUMBER

number of
clips per strip

tube size
to clip

QR3000 3g
fitting to clip

number of
clips per box
(min. order qty.)

CLIP 0400

8 clips

4mm (5/32)

—

5

CLIP 06 00

8 clips

6mm (1/4, 3/16)

—

5

CLIP 08 00

7 clips

8mm (5/16)

4mm (5/32)

5

CLIP 10 00

6 clips

10mm (2/8)

6mm (1/4)

5

CLIP 12 00

5 clips

12mm (1/2)

—

5

CLIP 14 00

4 clips

14mm

8mm (5/16)

5

Characteristics of the new clip
Material: Black Nylon 12
Mounting Screw: At least one self-tapping screw per clip is provided in each package. Same
screw for all clip sizes (9.5mm length).
Quantity of screws per box: 20 minimum to 40 maximum.

QR300071

tube cutter

H
L

This tool will cut all plastic tubes (e.g. nylon, teflon,
polyurethane, braided polyethylene, soft rubber, etc.)
from 1/8” to 1/2” diameter inclusive. It is designed to
give a clean cut at right angles to tube axis. A spring
maintains the cutter in the closed position.
Replacement blades are available.

Model No.

Height

Length

QR3000 71 00

.98

3.11

Blades No.: QR3000 71 05 (Sold in packages of two)

A-34

Dimensions are in millimeters unless otherwise noted.

Numatics valves
SEV quick exhaust valve
ANSI SYMBOL

specifications

ports
NPTF

SEV__AN

A

dimensions
B
C
D

1/8
1/4
1/2

SEV10AN
SEV25AN
SEV50AN

1/8
1/4
1/2

ports
G tap

SEV__

A

1/8
1/4
1/2
3/4
1

SEV10A
SEV25A
SEV50A
SEV75
SEV100

G1/8
G1/4
G1/2
G3/4
G1

1.30
1.58
2.17

1.10
1.30
1.69

E

1.65
2.05
2.80

.55
.71
1.06

dimensions (mm)
B
C
D
33
40
55
74
88

28
33
43
64
80

E

42
52
71
90
108

14
18
27
42
48

Quick exhaust valve, line mounting
Temperature Range: -40° to 165° F
Pressure range: 3.9 to 145 PSI

OA22-1 shuttle valve
ANSI SYMBOL

ports
NPTF

OA22–1

A

B

1/8

OA22-1

1.93

.95

dimensions
C
D
.75

1.26

E

F

G

.91

.87

.20

specifications
Temperature Range: -4° to 194° F
Pressure range: 3.9 to 145 PSI

ABC dimensions = inches.

A-35

Numatics Silencers
MV metering valve
ANSI SYMBOL

ports
NPTF

MV__

Cv

1/8
1/4
1/4
3/8
1/2
3/4
1

MV 05
MV 10
MV 25
MV 37
MV 50
MV 75
MV 100

.46
.80
1.80
1.80
3.38
8.34
8.34

dimensions
A
B
.90
1.16
1.37
1.31
1.62
2.00
3.00

1.09
1.44
1.50
1.50
2.00
2.37
3.50

C
.44
.50
.69
.69
.87
1.06
1.37

A__MN speed control muffler
ANSI SYMBOL

ports
NPTF

A__MN

Cv

1/8
1/4
3/8
1/2
3/4
1

A1MN
A2MN
A3MN
A4MN
A5MN
A6MN

.35
.67
.90
1.35
1.67
2.32

dimensions
A
B
1.12
1.42
1.47
1.75
2.00
2.25

1.31
1.56
1.63
2.00
2.38
2.50

B__MN breather vent silencer
ANSI SYMBOL

A-36

ABC dimensions = inches.

ports
NPTF

B__MN

Cv

1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2

B1MN
B2MN
B3MN
B4MN
B5MN
B6MN
B7MN
B8MN

.44
.65
1.12
1.77
4.72
7.30
10.63
12.72

dimensions
A
B
.44
.63
.75
.88
1.00
1.31
1.41
1.50

.44
.56
.68
.88
1.06
1.31
1.68
2.0

C
.50
.63
.69
.88
1.06
1.31

Numatics Silencers
M Series metal air silencers
ANSI SYMBOL

NPTF male
threads
NPTF

M_MN

Cv

1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2

M1MN
M2MN
M3MN
M4MN
M5MN
M6MN
M7MN
M8MN
M9MN

1.17
2.54
5.08
7.32
13.87
19.53
28.32
38.09
52.73

dimensions
A
B
1.38
1.75
2.25
2.72
3.16
3.88
4.50
5.00
5.50

1.22
1.53
2.00
2.41
2.81
3.47
4.16
4.59
5.06

C
.44
.56
.69
.88
1.06
1.31
1.69
2.00
2.38

NPTF female

8
6
5
4
3

2

2

M9MN

1-1/2 M8MN
1-1/4 M7MN

1000
8
6
5
4
3

1

M6MN

3/4

M5MN

1/2

M4MN

3/8

M3MN

1/4

M2MN

1/8

M1MN

2

100
8
6
5
4

threads
NPTF

M_FN

Cv

1/8
1/4
3/8
1/2

M1FN
M2FN
M3FN
M4FN

1.17
2.54
5.08
7.32

dimensions
A
B
1.38
1.75
2.25
2.72

1.22
1.53
2.00
2.41

C
.50
.62
.75
.94

NPTF metric male
metric
threads
tapered
1/8
1/4
3/8
1/2
3/4
1

M_MB

Cv

M1MB
M2MB
M3MB
M4MB
M5MB
M6MB

1.17
2.54
5.08
7.32
13.87
19.53

dimensions
A
B
1.38
1.75
2.25
2.72
3.16
3.88

1.22
1.53
2.00
2.41
2.81
3.47

C
.44
.56
.69
.88
1.06
1.31

3
2

10

4

8

15

30

45

60

75

90

Pressure (PSIG)

ABC dimensions = inches unless otherwise noted.

A-37

Numatics Silencers
P Series porous bronze air silencer
ANSI SYMBOL

NPTF male
threads
NPTF

P_MN

Cv

10-32
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2

P0MN
P1MN
P2MN
P3MN
P4MN
P5MN
P6MN
P7MN
P8MN
P9MN

.23
1.07
1.78
2.30
5.66
9.67
14.06
20.51
29.10
44.92

dimensions
A
B
.75
.84
1.20
1.45
1.89
2.12
2.84
3.44
4.00
4.75

.62
.69
.97
1.20
1.58
1.78
2.44
3.00
3.56
4.31

C
.38
.44
.56
.69
.88
1.06
1.31
1.69
2.00
2.38

metric male
metric
threads
tapered

8
6
5
4
3
2

2

P9MN

1-1/2 P8MN
1-1/4 P7MN

1000
8
6
5
4
3
2

100
8
6
5
4

1

P6MN

3/4

P5MN

1/2

P4MN

3/8

P3MN

1/4

P2MN

1/8

P1MN

3
2

10
4

8

15

30

45

60

75

90

Pressure (PSIG)

A-38

ABC dimensions = inches unless otherwise noted.

M5
1/8
1/4
3/8
1/2
3/4
1

P_MB

Cv

POMB
P1MB
P2MB
P3MB
P4MB
P5MB
P6MB

.23
1.07
1.78
2.30
5.66
9.67
14.06

dimensions
A
B
.75
.84
1.20
1.45
1.89
2.12
2.84

.62
.69
.97
1.20
1.58
1.78
2.44

C
.38
.44
.56
.69
.88
1.06
1.31

Numatics Flow Controls
FCRN and FCTN right angle flow controls
ANSI SYMBOL

features
Body swivels 360°, provides accurate speed control in
a compact size and eliminates need for fitting.

specifications
Temperature Range: 0° to 160° F
Maximum Operating Pressure: 175 PSIG (12 bar)

materials of construction
Body: anodized aluminum; cartridge: nickel plated
brass; screw: stainless steel; spring: stainless steel;
seals: Buna N

standard flow control
(with and without push-in fitting)

ports
NPTF

without
with tube
push-in push-in O.D.

Cv
non-metered

A

dimensions
B
C
D

10-32

0FCRN

0FPRN4
0FPRN5

1/8
5/32

.06

.89

.62

.43

.69

1/8

1FCRN

1FPRN8
1FPRN5

1/4
5/32

.34

1.46

.98

.65

1.00

1/4

2FCRN

2FPRN8 1/4
2FPRN12 3/8

.67

1.78

1.28

.91

1.03

3/8

3FCRN

3FPRN12
3FPRN16

3/8
1/2

1.85

2.23

1.45

1.02 1.30

1/2

4FCRN

4FPRN12
4FPRN16

3/8
1/2

2.84

2.82

1.84

1.28 1.40

knob adjust flow control
(with and without push-in fitting)

ports
NPTF

without
with tube
push-in push-in O.D.

Cv
non-metered

A

dimensions
B
C
D

10-32

0FCTN

0FPTN4
0FPTN5

1/8
5/32

.06

1.21

.62

.43

.69

1/8

1FCTN

1FPTN8
1FPTN5

1/4
5/32

.34

2.21

.98

.65

1.00

1/4

2FCTN

2FPTN8
2FPTN12

1/4
3/8

.67

2.50

1.28

.91

1.03

3/8

3FCTN

3FPTN12
3FPTN16

3/8
1/2

1.85

3.23

1.45

1.02 1.30

1/2

4FCTN

4FPTN12
4FPTN16

3/8
1/2

2.84

3.96

1.84

1.28 1.40

ABCD dimensions = inches.

A-39

Numatics Flow Controls
1FC1 and 2FC1 inline flow controls
ANSI SYMBOL

ports
NPTF

without
knurled
knob

1/8
1/4

1FC1
2FC1

with
knurled
knob Cv
1FC1K
2FC1K

.22
.22

A
1.50
1.50

dimensions
B
C
D
.75
.75

1.08
1.08

Optional Knurled Knob (suffix K)

FC2 and FC3 inline flow controls
ANSI SYMBOL

A-40

ABC dimensions = inches.

ports
NPTF

without
bottom
port

1/4
3/8

2FC2
3FC2

ports
NPTF

without
bottom
port

1/2
3/4

4FC3
5FC3

with
bottom
port Cv
2FC2B
3FC2B

2.3
2.7

with
bottom
port Cv
4FC3B
5FC3B

6.0
7.5

dimensions
A
B
2.34
2.34

1.06
1.06

dimensions
A
B
3.28
3.28

1.50
1.50

C
2.21
2.21

C
3.17
3.17

1.66
1.66

Numatrol Fittings
connector

tube to male thread

thread

134–

tube
O.D.-I.D.

Hex

A

B

qty.

1/8 NPTF
10-32
10-32

134-223
134-224
134-236

1/4-1/8
1/4-1/8
1/4-1/8

.438
.250
.250

.84
.62
.54

.109
.109
.047

25/bag
25/bag
25/bag

elbow and branch tee (male to female thread)

male to female thread

thread

134–

Hex

A

B

qty.

elbow
1/8 NPTF

134-225

.438

.70

.203

15/bag

10-32

134-226

.375

.54

.109

15/bag

134-227

.438

.70

.203

10/bag

134-228

.375

.54

.109

10/bag

thread

134–

Hex

A

B

qty.

10-32

134-233

.375

.68

.84

10/bag

1/8 NPTF

134-234

.438

.84

.203

10/bag

branch tee
1/8 NPTF
10-32

run tee (male to female thread)

male to female thread

bulkhead adapter (1/4 tube to 1/8 NPTF female thread)
bulkhead

134–

qty.

134-238

1/bag

plug
plug

129–

qty.

129-127

5/bag

how to order Numatrol fittings
Fittings are packaged in specific quantites–see “qty.” column in
each corresponding chart. Order the total quantity required,
making certain to order in even multiples.

A-41

Numatrol tubing
polyurethane tubing for Numatrol series
features
Numatrol polyurethane offers superior performance to other plastic
tubing with regard to kink resistance, low temperature flexibility,
higher working pressures, and resistance to ambient ozone oil,
grease, fuels and most chemicals.
The highly flexible tubing allows easy “push-in” connections and
neat installation with sharp bends possible in less than one inch.
Many Numatrol II installations that previously required the use of
nylon tubing for high pressure, clamp functions for example, can
now be easily accomplished with this new tubing.

For tube cutter, see page A-34.
For fractional tube clips, see page A-34.

O.D.

I.D.

135-

length

1/4
1/4
1/8
1/8

1/8
1/8
1/8
1/8

135-124
135-125
135-127
135-126

1000’ roll
100’ roll
1000’ roll
100’ roll

Tubing Temperature/Pressure Specifications

Ambient Temperature - Fahrenheit

A-42

ABC dimensions = inches.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         :  QuarkXPress 3.32r5E
Create Date                     : 1998:02:26 13:11:41
Title                           : Accessories Catalog
Author                          : Joseph J. Kaminsky - Numatics, Inc.
Producer                        : Acrobat PDFWriter 3.0 for Power Macintosh
Subject                         : 
Modify Date                     : 1999:05:10 11:28:37
Page Count                      : 42
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools