Fluke Electronics FI3000 Wireless MPO Inspection Probe User Manual

Fluke Electronics Wireless MPO Inspection Probe

User Manual

Radio Frequency Compliance Information For Class A DevicesInformation about radio frequency compliance is subject to change without notice. For up-to-date information, go to www.flukenetworks.com.FCC/IC InformationClass A digital device: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the two conditions that follow: (1) this device can not cause interference and (2) this device must accept any interference, including interference that can cause undesired operation of the device. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the *4969706*PN 4969706 January 2018 ©2018 Fluke CorporationThis device complies with Industry Canada licence-exempt RSSstandard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that maycause undesired operation of the device..NOTE: This equipment has been tested and found to complywith the limits for a Class A digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment isoperated in a commercial environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual,
2Class A Wireless Radio Compliance Informationinstruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.The term “IC” before the radio certification number only signifies the device meets Industry’s Canada technical specifications.NoteChanges or modifications to the wireless 2.4 GHz radio not expressly approved by Fluke Corporation could void the user’s authority to operate the equipment.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.may cause harmful interference to radio communications. Opera-tion of this equipment in a residential area is likely to causeharmful interference in which case the user will be required tocorrect the interference at his own expense.
3Class A Wireless Radio Compliance InformationThe radio transmitter has been approved by Industry Canadato operate only with the antenna supplied. Use of any otherantenna is strictly prohibited for use with this product.L'émetteur radio a été approuvé par Industrie Canada pourfonctionner uniquement avec l'antenne fournie. L'utilisationde toute autre antenne est strictement interdit d'utiliser ceproduit.MPE/SAR/RF Exposure InformationThis Product meets the SAR exemption based on its output power.MPE / SAR / RF Information sur l’ExpositionSur la base de la puissance de sortie de la radio, ce produit répond aux taux d'absorption spécifique exemption.Country-Specic InformationBrazilEste equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
4Class A Wireless Radio Compliance InformationMexicoLa operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispos-itivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, in-cluyendo la que pueda causar su operación no deseada.S. Korea당해 무선설비는 전파혼신 가능성이 있으므로인명안전과 관련된 서비스는 할수 없음. Taiwan低功率電波輻性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。警告使用者:這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取某些適當的對策。Thailandอุปกรณ์ด้านการโทรคมนาคมนี้เป็นไปตามข้อกำาหนดด้านเทคนิค NTC

Navigation menu