Fluke Electronics FI3000 Wireless MPO Inspection Probe User Manual
Fluke Electronics Wireless MPO Inspection Probe
User Manual
Radio Frequency
Compliance Information
For Class A Devices
Information about radio frequency compliance is subject to
change without notice. For up-to-date information, go to
www.flukenetworks.com.
FCC/IC Information
Class A digital device: This equipment has been tested and
found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. Operation is subject to
the two conditions that follow: (1) this device can not cause
interference and (2) this device must accept any interference,
including interference that can cause undesired operation of
the device. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy,
and if it is not installed and used in accordance with the
*4969706*
PN 4969706 January 2018
©2018 Fluke Corporation
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
2
Class A Wireless Radio Compliance Information
instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own
expense.
The term “IC” before the radio certification number only
signifies the device meets Industry’s Canada technical
specifications.
Note
Changes or modifications to the wireless
2.4 GHz radio not expressly approved by
Fluke Corporation could void the user’s
authority to operate the equipment.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
3
Class A Wireless Radio Compliance Information
The radio transmitter has been approved by Industry Canada
to operate only with the antenna supplied. Use of any other
antenna is strictly prohibited for use with this product.
L'émetteur radio a été approuvé par Industrie Canada pour
fonctionner uniquement avec l'antenne fournie. L'utilisation
de toute autre antenne est strictement interdit d'utiliser ce
produit.
MPE/SAR/RF Exposure Information
This Product meets the SAR exemption based on its output
power.
MPE / SAR / RF Information sur l’Exposition
Sur la base de la puissance de sortie de la radio, ce produit
répond aux taux d'absorption spécifique exemption.
Country-Specic Information
Brazil
Este equipamento não tem direito à proteção
contra interferência prejudicial e não pode causar
interferência em sistemas devidamente autorizados.
4
Class A Wireless Radio Compliance Information
Mexico
La operación de este equipo está sujeta a las siguientes
dos condiciones: (1) es posible que este equipo o dispos-
itivo no cause interferencia perjudicial y (2) este equipo
o dispositivo debe aceptar cualquier interferencia, in-
cluyendo la que pueda causar su operación no deseada.
S. Korea
당해 무선설비는 전파혼신 가능성이 있으므로인명안전과
관련된 서비스는 할수 없음.
Taiwan
低功率電波輻性電機管理辦法第十二條經型式認證合格之
低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性及功能。第
十四條低功率射頻電機之使用不得影響飛航安全及干擾合
法通信；經發現有干擾現象時，應立即停用，並改善至無
干擾時方得繼續使用。前項合法通信，指依電信規定作業
之無線電信。低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性電機設備之干擾。
警告使用者:這是甲類的資訊產品，在居住的環境中使用
時，可能會造成射頻干擾，在這種情況下，使用者會被要
求採取某些適當的對策。
Thailand
อุปกรณ์ด้านการโทรคมนาคมนี้เป็นไปตามข้อกำาหนด
ด้านเทคนิค NTC