Fluke 1743 Data Sheet

: Fluke Fluke-1743-Data-Sheet-809059 fluke-1743-data-sheet-809059 fluke pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

3000A/6000A Flex 4
for 174x and 173x PQ Analyzers
Technical Data

These current probe sets have been
designed for applications with Fluke
1735 and Fluke 1740 series products for
accurate non-intrusive measurement of
AC currents. Using latest technologies
(integrated memory for calibration data)
provides current ranges from 0.8 A up
to 6000 A in a frequency range of 40 Hz
to 5 kHz. The flexis are approved for the
required installation category.

Electrical specifications
Input ranges || L1, L2, L3, N
Measuring range
Intrinsic error
Position influence
Stray field influence
Temperature coefficient
Current transformer
Ratio selection
Connection

30/300/3000/6000 A ac
0.8 A to 6000 A ac
<2 % of ||
max. ± 2 % of m.v. for distance conductor to measuring head >30 mm
<± 2 A for |ext = 500 A ac and distance to measuring head >200 mm
<0.05 % / K
ratio : ≤ 999 kA / ≤ ||
by job programming for 174x series
by setup menu for 1735
3-phase, 3-phase + N
2-phase L1 and L3 (2W-meter-method)
7 pole connector

General specifications
Cable length
Length of measuring head
Operating temperature range
Storage temperature range
Operating humidity
Weight
Environment temperature range
Humidity
Current

Safety standards

4m
122 cm
-10 °C to +70 °C
-20 °C to +90 °C
10 % to 80 % (non-condensing)
1.5 kg
+18 °C to +26 °C
20 % to 75 % r.h.
Nominal value |n, sinusoidal waveform, 48 Hz to 65 Hz, distortion factor:
< 1 %, no dc component, stray field <40 A/m, conductor centred within
LEM~flex
IEC/EN61010-1:2001
IEC/EN61010-2-032:2002
IEC/EN61010-031:2002

EMC standards

IEC/EN 61326-1:2006

Safety

1000 V CAT III, 600 V CAT IV, pollution degree 2

The application of the LEM~flex on uninsulated conductors is limited to 1000 V ac r.m.s. or dc to ground and frequencies below 1 kHz.

Symbols
Do not apply around or remove from HAZARDOUS LIVE conductors, without using protective gloves.
Product is protected by double insulation.
Risk of Danger. Important information. See Instruction Sheet.
Canadian Standards Association has certified that the product meets applicable U.S. and Canadian Standards.
Conforms to relevant European Union directives.

Ordering information
3000/6000A FLEX 4: 3024472
3000A/6000A 36 inch Flexi Probe, 4 Phase

Fluke.	 Keeping your world
	
up and running.®
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2009 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 11/2009 3564612A D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.

2 Fluke Corporation

3000A/6000A Flex 4 for 174x and 173x PQ Analyzers



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Count                      : 2

EXIF Metadata provided by EXIF.tools