Fluke 28 Ii Users Manual EMCReport

: Fluke Fluke-28-Ii-Users-Manual-805568 fluke-28-ii-users-manual-805568 fluke pdf

Open the PDF directly: View PDF .
Page Count: 2

TABLE OF CONTENTS

Report # EMC2012Feb09-0733

ELECTROMAGNETIC COMPATIBILITY

TEST CERTIFICATE

for the

Fluke 28IIEx

Digital Multimeter

The Fluke 28IIEx was tested to the following standards

at the EMC laboratories of Fluke Corporation.

6920 Seaway Blvd Everett WA 98203

EN 61326-1:2006, EN61326-2-2:2006, CISPR 11:2004

Class A Emissions and Immunity

The Fluke 28IIEx passes test requirements for equipment used for:

□ Industrial Locations □ Controlled EM Environments ▣ Portable Equipment

▣ Non-Domestic Use (Class A) □ Domestic Use (Class B)

Class A equipment is equipment suitable for use in all establishments other than domestic and those directly connected to a low voltage power

supply network which supplies buildings used for domestic purposes.

Prepared by:

John Morton _________________________________________ Date: 02/09/12

Sr. Specialist Technician

Approved by:

Michael Meisner ______________________________________ Date: 2/9/12

Test Engineer .

I. Test Results

The Fluke 28IIEx Digital Multimeter was tested to the following Electromagnetic Compatibility [EMC]

requirements:

Adapted from CISPR 11 Table 2a

Emissions Limits for Class A Equipment

Port Frequency

MHz Limits Standard Pass/Fail

Enclosure 30 to 230 40dB (uV/m) quasi peak, measured at 10 meters. Pass

230 to 1000 47dB (uV/m) quasi peak, measured at 10 meters. Pass

AC mains 0.15 to 0.5 79dB (uV/m) quasi peak, 66dB (uV/m) average. CISPR 11 N/A

0.5 to 5.0 73dB (uV/m) quasi peak, 60dB (uV/m) average. N/A

5 to 30 73dB (uV/m) quasi peak, 60dB (uV/m) average. N/A

Adapted from EN 61326-1:2006 Table A.1

Immunity test requirements for portable test and measurement equipment

Port Phenomenon Basic standard Test value Criteria Pass/Fail

Enclosure

ESD EN 61000-4-2 4 kV/8 kV contact/air B Pass

EM Field EN 61000-4-3 3 V/m

(80 MHz to 1 GHz) A1 Pass

EM Field EN 61000-4-3 3 V/m

(1,4 GHz to 2 GHz) A1 Pass

EM Field EN 61000-4-3 1 V/m

(2,0 GHz to 2,7 GHz) A1 Pass

1. See performance criteria defiinitions on following page.