Fluke 714B Users Manual

: Fluke Fluke-714B-Users-Manual-806775 fluke-714b-users-manual-806775 fluke pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

712C/714C

RTD/TC Calibrator
Safety Sheet
Go to www.fluke.com to register your product, download manuals, and find more information.
A Warning identifies conditions and procedures that are dangerous to the user.

Warning
To prevent possible electrical shock, fire, or personal injury:
•

Carefully read all instructions.

•

Read all safety information before you use the Product.

•

Use the Product only as specified, or the protection supplied by the Product can be compromised.

•

Do not use the Product around explosive gas, vapor, or in damp or wet environments.

•

Never apply more than 30 V between any two terminals, or between any terminal and earth ground.

•

Do not use the Product if it is damaged.

•

The battery door must be closed and locked before you operate the Product.

•

Remove all probes, test leads, and accessories before the battery door is opened.

PN 4407748
December 2013
© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.

1

712C/714C
Safety Sheet
•

Remove the input signals before you clean the Product.

•

Have an approved technician repair the Product.

•

Replace the batteries when the low battery indicator shows to prevent incorrect measurements.

For safe operation and maintenance of the Product:
•

Repair the Product before use if the batteries leak.

•

Remove the batteries if the Product is not used for an extended period of time, or if stored in
temperatures that exceed the specification of the battery manufacturer. If the batteries are not removed,
battery leakage can damage the Product.

General Specifications
Battery Type .......................... 4 AA batteries
Temperature
Operating...................... -10 °C to 50 °C
Storage
With Batteries ............... Per specification of the battery manufacturer (not to exceed storage specification without batteries)
Without Batteries .......... -20 °C to 60 °C
Altitude
Operating...................... 2,000 meters
Storage ......................... 12,000 meters

2

RTD/TC Calibrator
General Specifications

Table 1. Symbols




Earth Ground
Conforms to relevant Australian
Standards.






Inspected and licensed by TÜV Product
Services.



CAT II

MEASUREMENT CATEGORY II is
applicable to test and measuring circuits
connected directly to utilization points
(socket outlets and similar points) of the
low voltage MAINS installation.

CAT III

CAT IV

MEASUREMENT CATEGORY IV is
applicable to test and measuring circuits
connected at the source of the building’s
low voltage MAINS installation.





Battery
Risk of danger. Important information. See Manual.

Conforms to European Union directives.

MEASUREMENT CATEGORY III is applicable to test and
measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.

Conforms to relevant North American Safety Standards.

This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you
must not discard this electrical/electronic product in domestic household waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling
information.

3

LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years from the date of
purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse,
alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest
Fluke authorized service center to obtain return authorization information, then send the product to that Service
Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A
PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99

4

Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2013:12:05 15:24:22-08:00
Create Date                     : 2013:12:05 15:23:09-08:00
Metadata Date                   : 2013:12:05 15:24:22-08:00
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:437f199e-351b-4216-ac75-05a6b6eae36e
Instance ID                     : uuid:f652274f-671b-487f-bcd5-2a30dd38d6ef
Page Count                      : 4
Author                          : 

EXIF Metadata provided by EXIF.tools