Fluke 714 Thermocouple Users Manual

Fluke-717-Series-Pressure-Calibrators-User-Mnaual-Supplement-Brochure Fluke-717-Series-Pressure-Calibrators-User-Mnaual-Supplement-Brochure

2015-09-09

: Fluke Fluke-714-Thermocouple-Users-Manual-806137 fluke-714-thermocouple-users-manual-806137 fluke pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

Manual Supplement
© 2007-2015 Fluke Corporation. All rights reserved..
Manual Title: 718 Users Supplement Issue: 6
Print Date: July 1998 Issue Date: 1/15
Revision/Date: 4, 3/06 Page Count: 3
This supplement contains information necessary to ensure the accuracy of the
above manual. This manual is distributed as an electronic manual on the
following CD-ROM:
CD Title: 718
CD Rev. & Date: 3, 2/2006
CD PN: 1549626
718 Users Manual Supplement
9/11 1
Change #1, 41517
On page 26, following the Weight specification add:
Protection Class: Pollution Degree II
Change #2
On page 5, under Table 3, add the following:
Conforms to relative Australian standards
Change #3
On page 1, replace the fifth paragraph with the following:
Your Calibrator is supplied with a holster, two installed 9 V alkaline batteries, one set of TL75 test leads, one set of
AC70A alligator clips, a Product Overview Manual, and a CD-Rom.
Change #4, 59695
On page 1, under the Pressure Calibrator heading replace the first paragraph with:
The Calibrator makes 5-digit pressure readings in the following units: psi, inH2O at 4 °C, inH2O at 20 °C, kPa,
cmH2O at 4 °C, cmH2O at 20 °C, bar, mbar, kg/cm2, inHg, mmHg, and inH2O at 60 °F.
Manual Supplement 718 30G/100G Users Manual
2 9/11
On page 2, add the following to Table 1:
inH2O at 60 °F
On page 25, replace the Pressure Sensor Input Table with:
Pressure Sensor Input
Model Range Max Accuracy
[1]
6 month 1 year
718 1G -1 to 1 psi 5 psi 0.050 % 0.050 %
-7 to 7 kPa 34.5 kPa
718
30G
-12 to 30 psi 60 psi 0.025 % 0.035 %
-83 to 207 kPa 413 kPa
718
100G
-12 to 100 psi 200 psi 0.025 % 0.035 %
-83 to 690 kPa 1.4 mPa
718
300G
-12 to 300 psi 375 psi 0.035 % 0.050 %
-83 to 2.1 mPa 2.6 mPa
[1] In an RF field of 1 V/m to 3 V/m between the frequencies of
1.4 GHz to 2.0 GHz, add 120 counts to specified accuracy.
718 Users Manual Supplement
1/15 3
Change #5, 59845
In the Specification section, add the following:
Specifications apply to the 718 Pressure Calibrators with firmware version 4.0 or greater. To verify the
firmware version, press and hold and power on the Calibrator.
Change #6, 67387
On page 5, under Table 3, add:
Conforms to relevant South Korean
EMC Standards.
On page 26, under General Specifications, add:
Electromagnetic Compatibility .......... Applies to use in Korea only. Class A Equipment (Industrial
Broadcasting & Communication Equipment)
This product meets requirements for industrial (Class A) electromagnetic
wave equipment and the seller or user should take notice of it. This
equipment is intended for use in business environments and is not to be
used in homes.
Change #7, 37
On page 1, replace the fifth paragraph with:
The Calibrator is supplied with a holster, two installed 9 V alkaline batteries, one set of TL75 test leads, one set of
AC70A alligator clips, a Product Overview Manual, and a CD-Rom.

Navigation menu