Fluke 789 Users Manual EMCReport

: Fluke Fluke-789-Users-Manual-806298 fluke-789-users-manual-806298 fluke pdf

Open the PDF directly: View PDF .
Page Count: 2

Report # EMC2008Nov17-1420

ELECTROMAGNETIC COMPATIBILITY

TEST CERTIFICATE

for the

Fluke 789

Processmeter

TABL

E

The Fluke 789 was tested to the following standard

at the EMC laboratories of Fluke Corporation.

EN 61326-1 :2006

Class A Emissions and Immunity

The Fluke 789 passes test requirements for equipment used for:

□ Industrial Locations □ Controlled EM Environments ▣ Portable Equipment

▣ Non-Domestic Use (Class A) □ Domestic Use (Class B)

Class A equipment is equipment suitable for use in all establishments other than domestic and those directly connected to a low voltage power

supply network which supplies buildings used for domestic purposes.

Prepared by: 17 Nov 2008

Michael Meisner ______________________________________ Date: _______________________

EMC Technician Specialist

Reviewed by: 17 Nov 2008

Thomas Smith _______________________________________ Date: _______________________

Test Engineer Sr.

Approved by:

 Product Evaluation Manager

 Division Engineering Manager

I. Test Results

The Fluke 789 Processmeter was tested to the following Electromagnetic Compatibility [EMC] requirements:

Adapted from CISPR 11 Table 2a

Emissions Limits for Class A Equipment

Port Frequency

MHz Limits Standard Pass/Fail

Enclosure 30 to 230 40dB (uV/m) quasi peak, measured at 10 meters. Pass

1

230 to 1000 47dB (uV/m) quasi peak, measured at 10 meters. Pass

1

AC mains 0.15 to 0.5 79dB (uV/m) quasi peak, 66dB (uV/m) average. CISPR 11 N/A

0.5 to 5.0 73dB (uV/m) quasi peak, 60dB (uV/m) average. N/A

5 to 30 73dB (uV/m) quasi peak, 60dB (uV/m) average. N/A

1. Initial Report: 789 EMC Test Report 9 Jul 2002.pdf

Portable test & measurement equipment that is not capable of operating while being charged

is tested to the following immunity requirments:

Adapted from IEC 61326-1:2005 Table A.1

Immunity test requirements for portable test and measurement equipment

Port Phenomenon Basic standard Test value Criteria Pass/Fail

Enclosure

ESD IEC 61000-4-2 4 kV/8 kV contact/air B Pass

2

EM Field IEC 61000-4-3 3 V/m

(80 MHz to 1 GHz) A1 Pass2

EM Field IEC 61000-4-3 3 V/m

(1,4 GHz to 2 GHz) A1 Pass

EM Field IEC 61000-4-3 1 V/m

(2,0 GHz to 2,7 GHz) A1 Pass

1. See performance criteria defiinitions on following page.

2. Initial Report: 789 EMC Test Report 9 Jul 2002.pdf