Fluke 810 Users Manual
2015-09-09
: Fluke Fluke-810-Users-Manual-810404 fluke-810-users-manual-810404 fluke pdf
Open the PDF directly: View PDF 
.
Page Count: 50
| Download | |
| Open PDF In Browser | View PDF |
Viewer Software Installation Guide November 2010 © 2010 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies. Table of Contents Title Page Introduction........................................................................................................ How to Contact Fluke ........................................................................................ Hardware Requirements .................................................................................... Operating System Software Requirements ........................................................ Windows XP Requirements .......................................................................... Windows 7 and Vista Requirements ............................................................. System Software Installation ............................................................................. Windows Installer 3.1.................................................................................... .NET Framework........................................................................................... Windows Mobile Device Center ................................................................... SQL Server .................................................................................................... SQL Server Compact 3.5 SP1 ....................................................................... SQL Server Compact for Devices ................................................................. ActiveSync .................................................................................................... Viewer Software Installation ............................................................................. 810 Vibration Tester Installation ....................................................................... How to Troubleshoot Software Installations ..................................................... After Installation the Viewer Software Program Does Not Open ................. During Installation of SQL Server 2005 Express Edition, SQL Server Fails ........................................................................................... Popup Message Displays Error 2147749896................................................. Popup Message Displays “SQL Server Setup Failed to Execute a Command for Server Configuration” ............................................................ The SQL Server 2005 Express Edition Fails to Install.................................. 810 Tester Is Not Connecting with Viewer Software.................................... Windows Installer 3.1 is Not Installing ......................................................... Auto Run Viewer Software Device Detection (Windows Startup) Does Not Work.............................................................................................. Popup Display Asks for the Removable Disk When Installing ActiveSync .................................................................................................... Database Backup Folder is Empty................................................................. How To Identify if a System is 32 or 64-Bit ................................................. How To Manually Backup Viewer Software Data........................................ How To Automatically Run any Application as an Administrator in Windows 7 and Vista..................................................................................... Mobile Device Center Setup Screen Appears ............................................... 810 Vibration Tester Does Not Connect to Viewer Software using Mobile Device Center.................................................................................... i 1 1 2 2 3 3 4 4 5 7 8 15 16 16 17 25 26 26 27 29 30 30 30 31 32 32 34 36 37 37 40 41 Viewer Software Installation Guide ii List of Figures Figure 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. Title Page Viewer Software Install Wizard ............................................................................. Software Requirements for Installation.................................................................. NET Framework Installation.................................................................................. Extract and Install .NET Framework ..................................................................... Mobile Device Installation ..................................................................................... Software Installation Status.................................................................................... SQL Server Installation.......................................................................................... SQL Server License Agreement............................................................................. SQL Server Prerequisites ....................................................................................... SQL Server Configuration Check .......................................................................... SQL Server Installation Wizard ............................................................................. SQL Server Configuration Status........................................................................... SQL Server Registration ........................................................................................ SQL Server Authentication .................................................................................... SQL Server Feature Selection ................................................................................ SQL Server Configuration Options........................................................................ SQL Server Error and Usage Report...................................................................... SQL Server Installation.......................................................................................... SQL Server 2005 Installation Complete ................................................................ SQL Server Compact Installation .......................................................................... ActiveSync Installation .......................................................................................... Mail Client Popup Message ................................................................................... Viewer Software Install Wizard ............................................................................. Viewer Software License Agreement .................................................................... Viewer Software Customer Information ................................................................ Viewer Software Setup........................................................................................... Viewer Software Custom Setup ............................................................................. Viewer Software Ready to Install .......................................................................... Viewer Software Installation Complete ................................................................. On-line Registration for Fluke 810 Vibration Tester ............................................. Software License Terms for Windows Mobile Device .......................................... Add/Remove Programs .......................................................................................... Uninstall Viewer Software from Start Menu ......................................................... Uninstall Viewer Software from Control Panel ..................................................... Error Message Popup for Configuration Checker.................................................. ActiveSync Error Message Popup.......................................................................... iii 2 4 5 6 7 7 8 9 9 10 10 11 11 12 13 13 14 14 15 15 16 16 17 18 19 20 21 22 23 24 25 28 28 28 29 32 Viewer Software Installation Guide 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. Remove ActiveSync............................................................................................... ActiveSync Update................................................................................................. Remove Viewer Software ...................................................................................... Hidden Folders in Windows Explorer.................................................................... My Computer Properties ........................................................................................ Backup for Viewer Software Data ......................................................................... Shortcut Properties ................................................................................................. Shortcut Advanced Properties................................................................................ Run as Administrator ............................................................................................. Mobile Device Connected...................................................................................... Mobile Device Not Connected............................................................................... Disconnect and Connect a Mobile Device ............................................................. End a Partnership for Mobile Device ..................................................................... iv 33 33 34 35 36 37 37 38 39 40 41 42 43 Introduction The Viewer Software Installation Guide is a step-by-step procedure for software installation. It includes hardware and software system requirements and a section on how to troubleshoot problems. The Viewer Software is delivered on CD or DVD. The software and the most current update are also available at: http://www.fluke.com/810Software How to Contact Fluke To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-3434-0181 • Singapore: +65-738-5655 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke's website at www.fluke.com. To register your product, visit http://register.fluke.com. To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. 1 Viewer Software Installation Guide Hardware Requirements The hardware requirements to operate this software are: • Processor Minimum: 600 MHz Pentium processor or equivalent Recommended: 1 GHz Pentium processor or higher • Ram Minimum: 512 MB Recommended: 2 GB or more • Hard Disk Minimum: 600 MB available space Recommended: 1 GB available space • CD or DVD Drive • Display Resolution Minimum: 800 x 600 256 colors Recommended: 1024 x 768 high color, 32-bit Operating System Software Requirements To start the installation: 1. Browse to the computer drive location for the Viewer Software Installation files. 2. Select the Viewer Software setup file and double-click on the icon . The setup program searches for the prerequisites that the Viewer Software needs before installation. Depending on the operating system and already installed applications, the program displays a pending list for installation, see Figure 1. Note To install the Viewer Software, you must have Administrator rights or be part of the Administrator group for the computer. Figure 1. Viewer Software Install Wizard 2 glq001.png Viewer Software Operating System Software Requirements Windows XP Requirements The software requirements for the Windows XP operating system are: • Windows Installer 3.1 • Microsoft .NET Framework 3.5 SP1 • Microsoft SQL Server 2005 Express SP2 • Microsoft SQL Server Compact 3.5 SP1 English • Microsoft SQL Server Compact 3.5 SP1 for Devices English • Microsoft ActiveSync Windows 7 and Vista Requirements The software requirements for the Windows 7 and Vista operating systems are: • Windows Installer 3.1 • Microsoft .NET Framework 3.5 SP1 • Microsoft SQL Server 2005 Express SP2 • Microsoft SQL Server Compact 3.5 SP1 English • Microsoft SQL Server Compact 3.5 SP1 for Devices English • Windows Mobile Device Center Driver Update 3 Viewer Software Installation Guide System Software Installation This section has instructions for installation of each program required before the Viewer Software installation. Windows Installer 3.1 Windows Installer 3.1 is available by default in Windows XP, Windows Vista, and Windows 7. If this software has been uninstalled or corrupted, it will display in the pending software installation list, see Figure 2. Click OK to continue and install Windows Installer 3.1. If this program continues to show in the pending list, see How to Troubleshoot Software Installations. Figure 2. Software Requirements for Installation 4 glq002.png Viewer Software System Software Installation .NET Framework If the .NET framework 3.5 SP1 is not installed in your system, the setup dialog shows it in the pending software list, see Figure 3. Figure 3. .NET Framework Installation glq003.png 5 Viewer Software Installation Guide Click Install to start the installation. The setup program extracts and installs the software in the default location, see Figure 4. Figure 4. Extract and Install .NET Framework 6 glq004.png Viewer Software System Software Installation Windows Mobile Device Center For the Windows Vista and Windows 7 operating systems, the Windows Mobile Device Center Driver Update is required for communication with the 810 Vibration Tester. The setup program extracts and installs the software in the default location, see Figure 5. Figure 5. Mobile Device Installation glq005.png As the software program installs the status changes to “Succeeded” and it starts to install the next software program in the pending list, see Figure 6. Figure 6. Software Installation Status glq006.png SQL Server The SQL Server 2005 Express SP2 software program is a database application and is required for the Viewer Software to store test and configuration data. The Installer setup extracts the files to a temporary directory in preparation for the installation, see Figure 7. 7 Viewer Software Installation Guide Figure 7. SQL Server Installation 8 glq007.png Viewer Software System Software Installation To install SQL Server 2005 Express Edition SP2: 1. When the End User License Agreement displays, check the “accept” box and click Next, see Figure 8. Figure 8. SQL Server License Agreement glq008.png 2. Wait while the program installs the prerequisites for SQL Server 2005 (Native Client and supported files). 3. Click Install to continue, see Figure 9. Figure 9. SQL Server Prerequisites glq009.png 9 Viewer Software Installation Guide The Installer scans the computer’s configuration, see Figure 10. Figure 10. SQL Server Configuration Check glq012.png 4. When the component installation is complete, click Next to continue. 5. When the SQL Server Installation Wizard displays, click Next to continue, see Figure 11. Figure 11. SQL Server Installation Wizard 10 glq013.png Viewer Software System Software Installation SQL Server 2005 setup checks the System Configuration to make sure that the installations are complete for all software requirements, see Figure 12. Otherwise, the Viewer Software will not work properly. Be sure to verify that the status for all requirements is “Success” before you continue. If not, see How to Troubleshoot Software Installations. Figure 12. SQL Server Configuration Status glq014.png 6. Click Next to continue. 7. Enter the Registration information, see Figure 13. Figure 13. SQL Server Registration glq015.png 11 Viewer Software Installation Guide 8. Click Next to continue. 9. Select the authentication mode as Window Authentication Mode, see Figure 14. Two authentication modes are available—Windows Authentication Mode and Mixed Mode. Windows Authentication uses the Windows user name and password for credentials checking and is the default configuration for the Viewer Software. Figure 14. SQL Server Authentication glq016.png 10. Click Next to continue. 11. When the Feature Selection window displays, leave the default selection as Database Services, see Figure 15. 12. To change the installation path, click Browse and pick a different location. 12 Viewer Software System Software Installation Figure 15. SQL Server Feature Selection glq017.png 13. Click Next to continue. 14. When the Configuration Options window displays, leave the default selection as Enable User Instances, see Figure 16. Figure 16. SQL Server Configuration Options glq018.png 15. Click Next to continue. 13 Viewer Software Installation Guide 16. When the Error and Usage Report Settings window displays, leave the checkboxes unchecked, see Figure 17. Figure 17. SQL Server Error and Usage Report glq019.png 17. Click Next to continue. 18. When the Ready to Install window displays, click Install to install SQL Server Database Services, see Figure 18. Figure 18. SQL Server Installation 19. When the installation is complete, click Next to continue. 14 glq020.png Viewer Software System Software Installation 20. When the Completing Setup window displays (see Figure 19), click Finish to return to the Pending List. Figure 19. SQL Server 2005 Installation Complete glq024.png SQL Server Compact 3.5 SP1 After successful installation of SQL Server 2005, the Installer begins the SQL Server Compact 3.5 SP1 installation, see Figure 20. This software is a requirement for communication with the 810 Vibration Tester. Figure 20. SQL Server Compact Installation glq025.png The software installs automatically, without any further prompts. 15 Viewer Software Installation Guide SQL Server Compact for Devices After successful installation of SQL Server Compact 3.1 SP1, the Installer begins the SQL Server Compact 3.1 SP1for Devices installation, see Figure 20. This software is a requirement for communication with the 810 Vibration Tester. The software installs automatically, without any further prompts. ActiveSync With the Windows XP operating system, the Viewer Software requires Active Sync v4.5. If not already installed, the Installer will prompt you to install this program, see Figure 21. Figure 21. ActiveSync Installation glq027.png Click Install to continue and finish the installation for ActiveSync. When complete, the popup message in Figure 22 displays. You can ignore this message. Click OK to continue. Figure 22. Mail Client Popup Message 16 glq029.png Viewer Software Viewer Software Installation Viewer Software Installation When all the prerequisite software installations are done, the Viewer Software installation begins, see Figure 23. Figure 23. Viewer Software Install Wizard glq030.png To install: 1. Click Next to continue. 2. When the License Agreement displays, check the “I accept the terms” box. 17 Viewer Software Installation Guide 3. Click Next to continue, see Figure 24. Figure 24. Viewer Software License Agreement 18 glq031.png Viewer Software Viewer Software Installation 4. When the Customer Information window displays, enter the user and organization names, see Figure 25. Figure 25. Viewer Software Customer Information glq032.png 19 Viewer Software Installation Guide 5. Click Next to continue. 6. Select setup type, see Figure 26. To install in the default location, select the Complete option. To change the installation location, select the Custom option. Figure 26. Viewer Software Setup 20 glq033.png Viewer Software Viewer Software Installation 7. Click Next to continue. For a custom setup the next window lets you change the installation path, see Figure 27. Figure 27. Viewer Software Custom Setup glq034.png 8. Change the installation path. 9. Click Next to continue. 21 Viewer Software Installation Guide 10. When the Ready to Install the Program window displays, click Install to continue. See Figure 28. Figure 28. Viewer Software Ready to Install glq035.png 11. Wait until you see the prompt to connect the 810 Vibration Tester. glq038.png 12. Connect to the 810 Vibration Tester. 22 Viewer Software Viewer Software Installation 13. Click OK to continue. The Installation Completed window displays, see Figure 29. Note Windows 7 and Vista require installation of Windows Mobile Device Center to work with the 810 Vibration Tester. You must connect the Tester to the computer before running the Viewer Software. As soon as the Tester connects to the computer it will start the installation automatically for Windows Mobile Center. See “810 Vibration Tester Installation.” Figure 29. Viewer Software Installation Complete glq039.png 23 Viewer Software Installation Guide 14. Click Finish to continue. The Registration window displays, see Figure 30. 15. Click Continue to register the Tester if not already done. Or, close the window to bypass the registration step. Figure 30. On-line Registration for Fluke 810 Vibration Tester 24 glq040.png Viewer Software 810 Vibration Tester Installation 810 Vibration Tester Installation Note The 810 Vibration Tester must be connected during the entire 810 Vibration Tester installation procedure. If the Viewer Software installation is in Windows 7 or Windows Vista, an additional update installs to the computer when you connect the 810 Vibration Tester to the computer. When the License Terms window displays, see Figure 31, click Accept to continue. Figure 31. Software License Terms for Windows Mobile Device glq041.png The Viewer Software installation is complete and ready to use. 25 Viewer Software Installation Guide How to Troubleshoot Software Installations This section includes these topics in the knowledge base: • After Installation the Viewer Software Program Does Not Open • During Installation of SQL Server 2005 Express Edition, SQL Server Fails • Popup Message Displays Error 2147749896 • Popup Message Displays “SQL Server Setup Failed to Execute a Command for Server Configuration” • The SQL Server 2005 Express Edition Fails to Install • 810 Tester Is Not Connecting with the Viewer Software • Windows Installer 3.1 Is Not Installing • Auto Run Viewer Software Device Detection (Windows Startup) Does Not Work • Popup Displays Asks for the Removable Disk when Installing • Database Backup Folder is Empty • How To Identify if a System is 32 Or 64-Bit • How To Manually Backup Viewer Software Data • How To Automatically Run Any Application As An Administrator • Mobile Device Center Setup Screen Appears • 810 Vibration Tester Does Not Connect to the Viewer Software using Mobile Device Center After Installation the Viewer Software Program Does Not Open Causes: 26 • Prerequisites are not installed properly. • Installation canceled or some of the files partially installed by other third party software. • SQL server user instance is not created properly. • SQL Server service is not started. Viewer Software How to Troubleshoot Software Installations Solution: If you are not able identify the specific problem, the best solution is to reinstall the Viewer Software and all of the prerequisites again. To do so, you need to uninstall: • SQL Server 2005 • SQL Server Native Client • SQL Server Setup Support Files (English) • MSXML 6.0 Parser or MSXML 6.0 SP2 • .NET Framework 3.5 SP1 • SQL Server Compact 3.5 SP1 English • SQL Server Compact 3.5 SP1 for Devices English • ActiveSync (Windows XP only) • Windows Mobile Device Center Driver Update (Windows 7 and Vista only) • Fluke Viewer Software Reinstall the Viewer Software and it will reinstall all the prerequisites and the Viewer Software. During Installation of SQL Server 2005 Express Edition, SQL Server Fails Causes: • An older version of SQL Server is installed on the computer. • The previous installation by a third-party software failed. • Not all the components were installed. • Installation was interrupted. • MSXML Service Pack 2 is installed already. Solution: 1. Uninstall: • The older version of SQL Server 2005, see Figure 32 • SQL Server Native Client • SQL Server Setup Support Files (English) • SQL Server VSS Writer • MSXML 6.0 Service Pack 2 or any other version found 27 Viewer Software Installation Guide Figure 32. Add/Remove Programs glq042.png 2. Uninstall the Viewer Software. To do so, go to Start>All Programs>Fluke>Uninstall Viewer Software, see Figure 33. Figure 33. Uninstall Viewer Software from Start Menu glq043.png 3. Or, go to Control Panel>Add/Remove Program>Viewer Software, see Figure 34. Figure 34. Uninstall Viewer Software from Control Panel 28 glq044.png Viewer Software How to Troubleshoot Software Installations Popup Message Displays Error 2147749896 Cause: During the SQL Server 2005 Express Edition install procedure, the error message shown in Figure 35 displays. Figure 35. Error Message Popup for Configuration Checker glq045.png Solution: Copy the script that follows into a text editor and save as fixwmi.cmd to the “c:” drive. From a command line, run c:\fixwmi.cmd. FIXWMI.CMD ----------------@echo on cd /d c:\temp if not exist %windir%\system32\wbem goto TryInstall cd /d %windir%\system32\wbem net stop winmgmt winmgmt /kill if exist Rep_bak rd Rep_bak /s /q rename Repository Rep_bak for %%i in (*.dll) do RegSvr32 -s %%i for %%i in (*.exe) do call :FixSrv %%i for %%i in (*.mof,*.mfl) do Mofcomp %%i net start winmgmt goto End :FixSrv if /I (%1) == (wbemcntl.exe) goto SkipSrv if /I (%1) == (wbemtest.exe) goto SkipSrv if /I (%1) == (mofcomp.exe) goto SkipSrv %1 /RegServer :SkipSrv goto End :TryInstall if not exist wmicore.exe goto End wmicore /s net start winmgmt :End ----------------- 29 Viewer Software Installation Guide Popup Message Displays “SQL Server Setup Failed to Execute a Command for Server Configuration” Cause: During the SQL Server 2005 Express Edition install procedure, you see the error message, “SQL Server Setup Failed To Execute A Command For Server Configuration.” This issue can happen if the System Date or Time is incorrect. glq046.png Solution: Double-click the clock in the Windows System tray or access the Date/Time Properties in the Windows Control Panel to ensure that the Date and Time settings are accurate. After you make a change, press Retry to continue the installation. The SQL Server 2005 Express Edition Fails to Install Cause: An error message displays that a higher version of MSXML 6.0 Server Pack 2 is installed and you cannot uninstall MSXML 6.0 from the Control Panel (Add/Remove Program). Solution: Uninstall the MSXML 6.0 Server Pack 2 and complete the installation of the SQL Server 2005 Express. A third-party tool must be used to uninstall the MSXML 6.0 Service Pack 2. From the internet, download the “Windows Installer CleanUp Utility 2.5.0.1” program to the computer. Run this program to uninstall MSXML 6.0 Service Pack 2. W Caution The Windows Installer CleanUp Utility is provided "as is" to help resolve installation problems for programs that use Microsoft Windows Installer. If you use this utility, you may have to reinstall other programs. 810 Tester Is Not Connecting with Viewer Software Windows XP OS: 1. Check that the 810 Tester is switched ON. 2. Check that the 810 Tester is connected correctly to the port. 3. Check that the USB port is working. 4. Check that Microsoft ActiveSync is connected (see the taskbar icon). glq047.png 5. Disconnect and reconnect the 810 Tester to the computer 2 to 3 times. 30 Viewer Software How to Troubleshoot Software Installations 6. If above is OK, then reinstall from Control Panel>Add/Remove Programs: • MS ActiveSync 4.5 • SQL Server Compact 3.5 SP1 for Devices English Windows 7 and Vista OS: 1. Check that the 810 Tester is switched ON. 2. Check that the 810 Tester is connected correctly to the port. 3. Check that the USB port is working. 4. Check that Microsoft ActiveSync connected (see the taskbar icon ). 5. Disconnect and reconnect the 810 Tester to the computer 2 to 3 times. 6. If above is OK, reinstall from Control Panel>Add/Remove Programs: • Windows Mobile Device Center Driver Update • SQL Server Compact 3.5 SP1 for Devices English Windows Installer 3.1 is Not Installing Cause: By default, Windows Installer 3.1 is installed with the Windows XP, Windows 7, and Vista operating systems. If the Viewer Software shows as a “pending” status, the operating system could be corrupted. glq048.png Solution: Install a new version of Windows Installer from the Microsoft website. Windows Installer 4.5 is at: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b5 6f-60b6-4412-95b9-54d056d6f9f4&displaylang=en Filename: WindowsXP-KB942288-v3-x86.exe 31 Viewer Software Installation Guide Auto Run Viewer Software Device Detection (Windows Startup) Does Not Work Cause: On a Windows 7 or Vista system, this is a Windows security issue. Solution: 1. Restart the computer and check for the program blocker icon in the taskbar. 2. Right-click on the icon and run the blocked program. glq049.png Popup Display Asks for the Removable Disk When Installing ActiveSync Cause: ActiveSync is not installed properly, see Figure 36. glq050.png Figure 36. ActiveSync Error Message Popup 32 glq051.png Viewer Software How to Troubleshoot Software Installations Solution: 1. Uninstall ActiveSync from Control Panel>Add/Remove Programs. See Figure 37. Figure 37. Remove ActiveSync glq052.png 2. If you have Internet access, go to the following URL and download Microsoft ActiveSync, see Figure 38: http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesyncregister.mspx Figure 38. ActiveSync Update glq053.png 33 Viewer Software Installation Guide 3. Click on the highlighted link to download and install the update in your computer. 4. Uninstall Viewer Software from Control Panel>Add/Remove Programs. See Figure 39. Figure 39. Remove Viewer Software glq054.png Note Older versions of the Viewer Software do not display the version number. If you see more than one version, remove all. 5. After you remove the Viewer Software, reinstall. The pending list displays as shown in Figure 21. 6. Click Install and follow the on-screen prompts. This will install Microsoft ActiveSync as well as the Viewer Software. 7. Open the Viewer Software. Database Backup Folder is Empty Cause: After a Viewer Software upgrade to version 1.5.x in Windows 7 or Vista, the database backup folder is empty. This is a known issue for new UAC Technologies for Windows Vista and Windows 7. System will not allow the user to write or modify any file to the Program Files folder. Instead, the operating system is redirecting to a Virtual Store folder in the user’s hidden folders. Solution: Follow these steps before uninstalling or upgrading: 1. Open Windows Explorer and go to the Users folder. This folder location will be based on the Windows installation. For example: C:\Users\\AppData\Local\VirtualStore\Program Files\Fluke810\Viewer Software = Windows logon username This is a hidden folder that you may not see. If not, enable “hidden folders” to view. 34 Viewer Software How to Troubleshoot Software Installations 2. Copy the files shown in Figure 40 to your preferred location for the database backup folder. Figure 40. Hidden Folders in Windows Explorer glq056.png 3. Install the latest version of the Viewer Software. 4. Delete the folder “Fluke810\Viewer Software” under the “VirtualStore\Program Files\”. 5. Run the Viewer Software application. 35 Viewer Software Installation Guide How To Identify if a System is 32 or 64-Bit Before you install the Viewer Software, determine if the operating system is 32 or 64-bit. To do so: 1. Go to My Computer. 2. Right-click and select Properties. Figure 41 shows the location for the system information on a Windows Vista operating system. Figure 41. My Computer Properties glq057.png For Windows XP or Windows 7 operating systems, use the same basic steps. For more information about how to determine what your operating system is, go to: http://support.microsoft.com/kb/827218. 36 Viewer Software How to Troubleshoot Software Installations How To Manually Backup Viewer Software Data To manually backup the Viewer Software data: 1. Go to My Computer>C:\Program Files\Fluke810\Viewer Software. 2. Copy the ViewerSoftware.mdf and ViewerSoftware_log.ldf files, see Figure 42. 3. Save these files to another location, for example D:\backup. Figure 42. Backup for Viewer Software Data glq059.png How To Automatically Run any Application as an Administrator in Windows 7 and Vista In Windows 7 and Vista, to automatically run an application as an administrator: 1. Right-click the Program Shortcut to run as an administrator. 2. Click Properties from the context menu. Note For Shortcuts pinned to the Taskbar you will need to right-click the icon and then right-click the program name from the jump list, see Figure 43. Figure 43. Shortcut Properties glq060.png 37 Viewer Software Installation Guide 3. Once you are in the Properties dialog box, click the Shortcut tab at the top of the dialog box. Click on Advanced, see Figure 44. Figure 44. Shortcut Advanced Properties 38 glq061.png Viewer Software How to Troubleshoot Software Installations 4. Check the box for Run as administrator. 5. Click OK to finish, see Figure 45. Now your shortcut will automatically run your program in administrator mode without any extra steps or special permission. Figure 45. Run as Administrator glq062.png 39 Viewer Software Installation Guide Mobile Device Center Setup Screen Appears Cause: The 810 Vibration Tester is connected with the Viewer Software through Windows Mobile Device Center to a PC with Windows 7 or Vista operating system. By default, this window opens every time you connect to the Tester, see Figure 46. Solution: Do not change any of the device settings, close this window, and continue your work in the Viewer Software. Figure 46. Mobile Device Connected 40 glq063.png Viewer Software How to Troubleshoot Software Installations 810 Vibration Tester Does Not Connect to Viewer Software using Mobile Device Center Cause: Setting the device partnership with the computer can cause this problem, see Figure 47. Figure 47. Mobile Device Not Connected glq064.png 41 Viewer Software Installation Guide Solution: To end the partnership: 1. Open the windows mobile device center screen, see Figure 48. Figure 48. Disconnect and Connect a Mobile Device 42 glq065.png Viewer Software How to Troubleshoot Software Installations 2. Click End partnership. The screen shown in Figure 49 displays. Figure 49. End a Partnership for Mobile Device glq066.png 3. Click Yes and close this window. Now the 810 Vibration Tester will connect. 4. If not, disconnect the Tester and connect again. 43 Viewer Software Installation Guide 44
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:12:22 09:29:51+05:30 Modify Date : 2010:12:23 08:15:10-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 8.0.0 (Windows) Metadata Date : 2010:12:23 08:15:10-08:00 Format : application/pdf Title : untitled Document ID : uuid:a682d282-8ebd-4036-af8b-0ac26c3cf559 Instance ID : uuid:b9a97c59-9171-47f6-bab3-bb987749760f Page Mode : UseOutlines Page Count : 50EXIF Metadata provided by EXIF.tools