Fluke 87V Ex Users Manual MS6

: Fluke Fluke-87V-Ex-Users-Manual-808285 fluke-87v-ex-users-manual-808285 fluke pdf

Open the PDF directly: View PDF .
Page Count: 4

Manual Supplement

© 2006-2011 Fluke Corporation. All rights reserved. Printed in the U.S.A. x

Manual Title: 87 V Ex Users Supplement Issue: 6

Part Number: 2518115 Issue Date: 6/11

Print Date: December 2005 Page Count: 3

Revision/Date:

This supplement contains information necessary to ensure the accuracy of the

above manual.

Manual Supplement 87V Ex Users

1 1/07

Change#1

On page 55, under, Maximum output values at the voltage input change:

From: Co = 2.52 F

To: Co = 2.52 μF

Under, Maximum output values at the current-measuring inputs change:

From: Co = 1000 F

To: Co = 1000 μF

Change #2, 39785

On page 52, under Electrical Characteristics of the Terminals, replace the Diode row with the

following:

G 1000 V rms < 7.9 V dc 3.000 V dc 1.0 mA typical

87V Ex Users Manual Supplement

1/07 2

Change #3, 44008

On page 45, under General Specifications,

Change: Relative Humidity: 0 % to 80 % (0 °C to 35 °C); 0 % to 70 % (35 °C to 50 °C)

To: Relative Humidity: 0 % to 80 % (0 °C to 35 °C)

On page 47, under DC Voltage, Resistance, and Conductance Function, add the following

note:

[3] Maximum of 60 % relative humidity or a maximum of 28 °C.

Under Range, change the following:

From:

6.000 MΩ

50.00 MΩ

To: 6.000 MΩ[3]

50.00 MΩ[3]

In the 60.00 nS range change the Accuracy,

From: ± (1.0 % + 10)[1,2]

To: unspecified

Manual Supplement 87V Ex Users

3 6/11

Change #4, W2041055

On page 6, under EX-Certification Data,

Change: Ex-designation: ( II 2 G EEx ia IIC T4

To : Ex-designation: ( II 2 G Ex ia IIC T4

Change #5, 55377

On page 7, in Table 1 remove the following:

® Inspected and licensed by TÜV Product Services.

On page 45, under General Specifications, replace Safety with:

Safety: Meets 1000V CAT III/600V CAT IV per ANSI/ISA-61010-1 (82.02.01):2004, UL 61010-1:2004, CAN/CSA

C22.2 No. 61010-1-04, and EN/IEC 61010-1:2001. The product is designed for industrial applications in areas with

an increased risk of explosion in zones 2 and 1, in accordance with directive 1999/92/EC (ATEX 137).

Change #6, 58805

On page 45, under the General Specifications, replace Electromagnetic Compatibility with:

Electromagnetic Compatibility: In an RF field of 3 V/m total accuracy = specified accuracy + 20 counts

Except: 600 μA dc range total accuracy = specified accuracy + 60 counts.

Temperature not specified.

Some mobile devices that transmit RF energy may transmit levels that far exceed 3 V/m and may damage sensitive electronic

circuits. To insure the best performance, do not allow a device which is transmitting RF energy in excess of 3 V/m to be within

30 cm of the meter while in use.