Fluke 87V Industrial Users Manual
2015-09-09
: Fluke Fluke-87V-Industrial-Users-Manual-805478 fluke-87v-industrial-users-manual-805478 fluke pdf
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
Manual Supplement Manual Title: Part Number: Print Date: Revision/Date: 80 Series V Users Web-Only May 2004 2, 11/08 Supplement Issue: Issue Date: Page Count: 6 6/15 6 This supplement contains information necessary to ensure the accuracy of the above manual. © 2010-2015 Fluke Corporation. All rights reserved. 80 Series V Users Manual Supplement Change #1 On page 42, Table 9, replace the AC72 with: AC172 Alligator Clips for use with TL175 test lead set. Change #2, 55804, 62912, 64090, 509, 167 On page 2, under the Safety Information, delete the bullets and move the last sentence on page 5, prior to Table 1: Electrical symbols used on the Meter and in the manual are explained in Table 1. On page 4, add the following to the Cautions: • 6/15 For best mechanical performance, the Product must remain in the holster at all times. 1 Manual Supplement 80 Series V Users On page 5, replace Table 1 with: Table 1. Electrical Symbols AC (Alternating Current) DC (Direct Current) Fuse Hazardous voltage. Risk of electric shock. Conforms to European Union directives. Risk of Danger. Important information. See Manual. Conforms to relevant North American Association directives. Battery. Low battery when displayed. Double insulated Continuity test or continuity beeper tone. Capacitance Conforms to relevant South Korean EMC Standards. Inspected and licensed by TÜV Product Services. Consult user documentation. Conforms to relevant Australian EMC standards. Earth ground CAT II Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. CAT III Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building’s low-voltage MAINS installation. CAT IV Measurement Category IV is applicable to test and measuring circuits connected at the source of the building’s low-voltage MAINS installation. 2 6/15 80 Series V Users Manual Supplement On page 40, replace Table 8 with: Table 8. Replacement Parts (cont.) Item AC172 AC172 TL175 MP81 MP390-391 NA U5 CR6 S2 TM1 TM2 6/15 Description Qty. Alligator Clip, Black Alligator Clip, Red Test Lead Set Thermocouple Assembly, K-Type, Beaded, Molded Dual Banana Plug, Coiled Access Door Fastener Tiltstand LCD, 4.5 DIGIT,TN, Transflective, Bar Graph, OSPR80 Lightpipe Keypad 80 Series V Multi-Language Safety Information 80 Series V Quick Reference Card 3 1 1 1 1 2 1 1 1 1 1 1 Fluke Part or Model Number 3970052 3970041 3967971 1273113 948609 2074040 2065213 2074057 2105884 4271753 2101986 Manual Supplement 80 Series V Users On page 41, replace Figure 12 with: MP8 MP5 MP81 MP31 Holster MP15 U5 J1-2 CR6 Tilt Stand S2 MP13 MP2 MP9 MP41 J3 F2 MP27-30 F1 Quick Reference Guide MP4 MP14 Safety Information BT2 H5-9 (5) MP6 MP10-11 H2-4 (3) BT1 MP22 MP390-391 aom015c.eps Figure 12. Replacement Parts 4 6/15 80 Series V Users Manual Supplement On page 43, replace the General Specifications, with: General Specifications Maximum Voltage between any Terminal and Earth Ground: 1000 V rms Fuse Protection for mA or μA inputs: 0.44 A, 1000 V, IR 10 kA Fuse Protection for A input: 11 A, 1000 V, IR 17 kA Display: Digital: 6000 counts updates 4/sec; (Model 87 also has 19,999 counts in high-resolution mode). Analog Bargraph: 33 segments, updates 40/sec. Frequency: 19,999 counts, updates 3/sec at > 10 Hz Temperature: Operating: -20 °C to +50 °C; Storage: -40 °C to +60 °C Altitude: Operating: 2000 m; Storage: 10,000 m Temperature Coefficient: 0.05 x (specified accuracy)/ °C (< 18 °C or > 28 °C) Safety ..................................................... IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V / CAT III 1000 V Electromagnetic Compatibility (EMC) International ...................................... IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. 6/15 5 80 Series V Users Manual Supplement Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. Korea (KCC) ....................................... Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) ............................................ 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Relative Humidity: 0 % to 90 % (0 °C to 35 °C); 0 % to 70 % (35 °C to 55 °C) Battery Type: 9 V, NEDA 1604 or IEC 6F22 Battery Life: 400 hrs typical with alkaline (with backlight off) Size (HxWxL): 1.25 in x 3.41 in x 7.35 in (3.1 cm x 8.6 cm x 18.6 cm) Size with Holster and Flex-Stand: 2.06 in x 3.86 in x 7.93 in (5.2 cm x 9.8 cm x 20.1 cm) Weight: 12.5 oz (355 g) Weight with Holster and Flex-Stand: 22.0 oz (624 g) On page 44, under Detailed Specifications, prior to Table 10 add: All ranges unless otherwise noted: In an RF field of 3 V/m total accuracy = specified accuracy + 20 counts, except 600 μA dc range total accuracy = specified accuracy + 60 counts. Temperature not specified. Some mobile devices that transmit RF energy may transmit levels that far exceed 3 V/m and may damage sensitive electronic circuits. To insure the best performance, do not allow a device that is transmitting RF energy in excess of 3 V/m to be within 30 cm of the meter while in use. 6 6/15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Create Date : 2015:06:18 07:36:36-07:00 Modify Date : 2015:06:18 07:37:55-07:00 Metadata Date : 2015:06:18 07:37:55-07:00 Producer : Acrobat Distiller 10.0.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:64690d71-190e-4a65-a6f9-21c99d347b81 Instance ID : uuid:50aecb0a-0de0-4b56-84ab-dcb07eee9371 Page Count : 7EXIF Metadata provided by EXIF.tools