Fluke 87V Industrial Users Manual

: Fluke Fluke-87V-Industrial-Users-Manual-805478 fluke-87v-industrial-users-manual-805478 fluke pdf

Open the PDF directly: View PDF .
Page Count: 7

Manual Supplement

© 2010-2015 Fluke Corporation. All rights reserved. 

Manual Title: 80 Series V Users Supplement Issue: 6

Part Number: Web-Only Issue Date: 6/15

Print Date: May 2004 Page Count: 6

Revision/Date: 2, 11/08

This supplement contains information necessary to ensure the accuracy of the

above manual.

80 Series V Users Manual Supplement

6/15 1

Change #1

On page 42, Table 9, replace the AC72 with:

AC172 Alligator Clips for use with TL175 test lead set.

Change #2, 55804, 62912, 64090, 509, 167

On page 2, under the Safety Information, delete the bullets and move the

last sentence on page 5, prior to Table 1:

Electrical symbols used on the Meter and in the manual are explained in Table 1.

On page 4, add the following to the Cautions:

• For best mechanical performance, the Product must remain in the holster at all times.

Manual Supplement 80 Series V Users

2 6/15

On page 5, replace Table 1 with:

Table 1. Electrical Symbols

 AC (Alternating Current)  Earth ground

 DC (Direct Current)  Fuse

 Hazardous voltage. Risk of electric shock.  Conforms to European Union directives.

 Risk of Danger. Important information.

See Manual.  Conforms to relevant North American Association

directives.

 Battery. Low battery when displayed.  Double insulated

 Continuity test or continuity beeper tone.  Capacitance

 Conforms to relevant South Korean EMC

Standards.  Inspected and licensed by TÜV Product Services.

 Consult user documentation.  Conforms to relevant Australian EMC standards.

CAT II Measurement Category II is applicable to test and measuring circuits connected directly to utilization

points (socket outlets and similar points) of the low-voltage MAINS installation.

CAT III Measurement Category III is applicable to test and measuring circuits connected to the distribution part

of the building’s low-voltage MAINS installation.

CAT IV Measurement Category IV is applicable to test and measuring circuits connected at the source of the

building’s low-voltage MAINS installation.

80 Series V Users Manual Supplement

6/15 3

On page 40, replace Table 8 with:

Table 8. Replacement Parts (cont.)

Item Description Qty.

Fluke Part or Model

Number

AC172 Alligator Clip, Black 1 3970052

AC172 Alligator Clip, Red 1 3970041

TL175 Test Lead Set 1 3967971

MP81 Thermocou

p

le Assembl

y

, K-T

yp

e, Beaded, Molded Dual Banana Plu

g

, Coiled 1 1273113

MP390-391 Access Door Fastener 2 948609

NA Tiltstand 1 2074040

U5 LCD, 4.5 DIGIT,TN, Transflective, Bar Gra

p

h, OSPR80 1 2065213

CR6 Li

g

ht

p

i

p

e 1 2074057

S2 Ke

yp

ad 1 2105884

TM1 80 Series V Multi-Lan

g

ua

g

e Safet

y

Information 1 4271753

TM2 80 Series V Quick Reference Card 1 2101986

Manual Supplement 80 Series V Users

4 6/15

On page 41, replace Figure 12 with:

MP4

MP2

H2-4 (3)

BT1

MP390-391

MP6

MP22

MP10-11

MP5 Holster

MP15

Tilt Stand

MP8

F2

F1

MP14

S2

MP31

U5

CR6

MP81

MP9 MP41

J1-2

MP27-30

J3

H5-9 (5)

MP13

BT2

Quick

Reference

Guide

Safety

Information

aom015c.eps

Figure 12. Replacement Parts

80 Series V Users Manual Supplement

6/15 5

On page 43, replace the General Specifications, with:

General Specifications

Maximum Voltage between any Terminal and Earth Ground: 1000 V rms

Fuse Protection for mA or μA inputs: 0.44 A, 1000 V, IR 10 kA

Fuse Protection for A input: 11 A, 1000 V, IR 17 kA

Display: Digital: 6000 counts updates 4/sec; (Model 87 also has 19,999 counts in high-resolution mode).

Analog Bargraph: 33 segments, updates 40/sec. Frequency: 19,999 counts, updates 3/sec at > 10 Hz

Temperature: Operating: -20 °C to +50 °C; Storage: -40 °C to +60 °C

Altitude: Operating: 2000 m; Storage: 10,000 m

Temperature Coefficient: 0.05 x (specified accuracy)/ °C (< 18 °C or > 28 °C)

Safety ..................................................... IEC 61010-1: Pollution Degree 2

IEC 61010-2-033: CAT IV 600 V / CAT III 1000 V

Electromagnetic Compatibility (EMC)

International ...................................... IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2

CISPR 11: Group 1, Class A

Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio

frequency energy that is necessary for the internal function of the equipment itself.

Class A: Equipment is suitable for use in all establishments other than domestic and those

directly connected to a low-voltage power supply network that supplies buildings used for

domestic purposes. There may be potential difficulties in ensuring electromagnetic

compatibility in other environments due to conducted and radiated disturbances.

80 Series V Users Manual Supplement

6 6/15

Emissions that exceed the levels required by CISPR 11 can occur when the equipment is

connected to a test object.

Korea (KCC) ....................................... Class A Equipment (Industrial Broadcasting & Communication Equipment)

Class A: Equipment meets requirements for industrial electromagnetic wave equipment and

the seller or user should take notice of it. This equipment is intended for use in business

environments and not to be used in homes.

USA (FCC) ............................................ 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.

Relative Humidity: 0 % to 90 % (0 °C to 35 °C); 0 % to 70 % (35 °C to 55 °C)

Battery Type: 9 V, NEDA 1604 or IEC 6F22

Battery Life: 400 hrs typical with alkaline (with backlight off)

Size (HxWxL): 1.25 in x 3.41 in x 7.35 in (3.1 cm x 8.6 cm x 18.6 cm)

Size with Holster and Flex-Stand: 2.06 in x 3.86 in x 7.93 in (5.2 cm x 9.8 cm x 20.1 cm)

Weight: 12.5 oz (355 g)

Weight with Holster and Flex-Stand: 22.0 oz (624 g)

On page 44, under Detailed Specifications, prior to Table 10 add:

All ranges unless otherwise noted: In an RF field of 3 V/m total accuracy = specified accuracy + 20 counts, except

600 μA dc range total accuracy = specified accuracy + 60 counts. Temperature not specified.

Some mobile devices that transmit RF energy may transmit levels that far exceed 3 V/m and may damage sensitive

electronic circuits. To insure the best performance, do not allow a device that is transmitting RF energy in excess of

3 V/m to be within 30 cm of the meter while in use.