Fluke Esa612 Users Manual

2015-02-02

• ESA612 Users Manual
  • Warranty
    • Notices
  • Table of Contents
  • List of Tables
  • List of Figures
• Introduction
• Safety Information
• Intended Use
• Unpacking the Analyzer
• Instrument Familiarization
• Connecting to Line Power
• Connecting a DUT to the Analyzer
• Turning the Analyzer On
• Accessing the Analyzer’s Functions
• Setting Up the Analyzer
  • Setting Polarity Switching Delay
  • Setting the Display Contrast
  • Setting up the Beeper
  • Viewing Instrument Information
  • Viewing Memory
  • Setting the GFCI Limit
• Performing Electrical Safety Tests
  • Setting the Test Standard
  • Performing Mains Voltage Testing
  • Performing a Ground Wire (Protective Earth) Resistance Test
  • Performing an Insulation Resistance Test
  • Performing a Current Consumption Test
  • Performing Leakage Current Tests
    • Measuring Earth Leakage Current
    • Performing a Chassis (Enclosure) Leakage Test
    • Performing a Lead-to-Ground (Patient) Leakage Test
    • Performing Lead-to-Lead (Patient Auxiliary) Leakage Tests
  • Performing a Lead Isolation (Mains on Applied Part) Leakage Test
  • Performing an Alternative Equipment Leakage Test
  • Performing an Alternative Applied Part Leakage Test
  • Performing a Direct Equipment Leakage Test
  • Performing a Direct Applied Part Leakage Test
  • Performing a Differential Leakage Current Test
• Using the 1210 Adapter
• Making Point-To-Point Measurements
  • Measuring Voltage
  • Measuring Resistance
  • Measuring Current
• Simulating ECG Waveforms
• Using Memory
  • Storing Data into Memory
  • Viewing Memory Data
  • Deleting Data from Memory
• Controlling the Analyzer Remotely
• Maintenance
• Testing and Replacing the Fuses
• Cleaning the Analyzer
• Replaceable Parts
• Accessories
• Specifications
• Detailed Specifications