Fluke Lvd2 Volt Light Users Manual
243809-Installationsheet 243809-InstallationSheet 243809-InstallationSheet 095969 Batch4 unilog cesco-content
Fluke-LVD2-Volt-Light-User-Manual-Brochure Fluke-LVD2-Volt-Light-User-Manual-Brochure
2015-09-09
: Fluke Fluke-Lvd2-Volt-Light-Users-Manual-810133 fluke-lvd2-volt-light-users-manual-810133 fluke pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
FOR USE BY COMPETENT PERSONS Anyone using this instrument should be knowledgeable and trained about the risks involved with measuring voltage, especially in an industrial setting, and the importance of taking safety precautions and of testing the instrument before and after using it to ensure that it is in good working condition. Read First: Safety Information LVD2 VoltAlert Safety Sheet WX Warning To avoid possible electric shock or personal injury: ●● If the Tester is used in a manner not specified by the manufacturer, protection provided by the Tester may be affected. ●● Do not use if the flashlight does not operate, or if battery door clip is not securely fastened. ●● Test on a known live source within the rated ac voltage range of the product, both before and after use to ensure unit is in good working condition. ●● When using the Tester, if tip does not glow, voltage could still be present. The Tester indicates active voltage in the presence of electrostatic fields of sufficient strength generated from the source (MAINS) voltage. If the field strength is low, the Tester may not provide indication of live voltages. Lack of an indication occurs if the Tester is unable to sense the presence of voltage which may be influenced by several factors including, but not limited to: ●● Shielded wire/cables ●● Thickness and type of insulation ●● Distance from the voltage source ●● Fully-isolated users that prevent an effective ground ●● Receptacles in recessed sockets/ differences in socket design ●● Condition of the Tester and Batteries ●● Do not use if the Tester appears damaged or if the Tester is not operating properly. If in doubt, have the Tester serviced. ●● Use product with arrow visible and keep fingers behind light indicating area. ●● Do not use for dc voltage measurements or around voltages exceeding 600 volts, or in the presence of variable motor drives. ●● Use caution with voltages above 30 V ac as a shock hazard may exist. ●● Do not allow the Tester to directly touch live circuits. ●● Using the Tester while attached to any metal object could lead to electric shock or personal injury. ●● Do not stare or look directly at the LED flash light. The light is extremely bright. ●● Comply with local and national safety requirements. ●● Use proper protective equipment as required by local or national authorities. Table 1. Symbols T Double Insulated. X Hazardous Voltage. Risk of electric shock. W Risk of danger. Important information. Conforms to relevant Canadian and US Standards. Conforms to relevant European Union directives. Conforms to relevant Australian standards. Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling information. CAT IV s Equipment is designed to protect against transients from the primary supply level. (i.e. - electricity meter or overhead /underground utility service). Technischer Überwachungs Verein. German certifying body. PN 3496908 July 2009 © 2009 Fluke Corporation. Specifications are subject to change without notice. All rights reserved. Printed in China. Contacting Fluke ●● ●● ●● ●● Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853) Anywhere in the world: +1-425-446-5500 Or, visit Fluke’s website at www.fluke.com. To register your product, visit http://register.fluke.com. To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for two years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Fluke Corporation P.O. Box 9090 Everett, WA 98206-9090 U.S.A. 11/99 Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:f2edcd6a-1bc8-4a49-8a88-8c3b65c87088 Document ID : adobe:docid:indd:2114116a-f5fd-11dc-8484-b090b3759c6f Rendition Class : proof:pdf Derived From Instance ID : 21141169-f5fd-11dc-8484-b090b3759c6f Derived From Document ID : adobe:docid:indd:21141168-f5fd-11dc-8484-b090b3759c6f Manifest Link Form : ReferenceStream Manifest Placed X Resolution : 72.00 Manifest Placed Y Resolution : 72.00 Manifest Placed Resolution Unit : Inches Manifest Reference Instance ID : uuid:70EC187BA201DD11896BC96E2D77B1E2 Manifest Reference Document ID : uuid:D7909F6C8BE1DC11B3E0AF2794387488 Create Date : 2009:06:30 11:15-07:00 Modify Date : 2009:06:30 11:23:24-07:00 Metadata Date : 2009:06:30 11:23:24-07:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 1024 Thumbnail Height : 1024 Thumbnail Image : (Binary data 116674 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools