Flying Dragon Development LT-0331 LANTERN User Manual BR Manual CampRocker 1

Download:
Mirror Download [FCC.gov]
Document ID	2757584
Application ID	NvDZwhYcMxO5m/l66WhaFA==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	463.49kB (5793575 bits)
Date Submitted	2015-09-22 00:00:00
Date Available	2015-09-22 00:00:00
Creation Date	2015-09-15 08:49:18
Producing Software	Adobe PDF library 10.01
Document Lastmod	2015-09-15 08:49:18
Document Title	BR-Manual-CampRocker_1
Document Creator	Adobe Illustrator CS6 (Windows)

How To Charge
Fully charge the lantern using the supplied Micro-USB charging cable.
1. Connect the micro-USB charing cable into the lanterns charging port at the
back of the lantern, and the USB end of the micro-USB charging
cable into your home power outlet (DC5V power sources). Or use a
computer or other 5V/1A power source. Plug the USB charging cable into the
USB port.
2. Standard charging time is around 4.5 hours. (Depending on the life of the
battery, the charging time will vary). Be careful not to charge it for more
than 8 hours. Over charging will damage the battery.
Status indicator:
The battery power indicator light indicates how much
battery life remains for the mode in use.
Light flashing =
All lights on =
Three light on =
Two light on =
One light on =
Charging
Fully charged 100% battery life
Around 75% battery life
Around 50% battery life
Status
Low battery > Around 25% battery life indicator
NOTE: The charging time and the operation time may vary depending on the use environment.
Charging
100% battery life 75% battery life 50% battery life 25% battery life
Operation Instruction
Operation with light function
Operation with power bank function
To turn the lantern ON, press the main button.
Adjust the light mode (High / Low / Red / Off) by pressing the main button.
To turn the lantern OFF, press the main button once after Red light mode.
1. Select the suitable USB charging cable (different devices require
different charging cables for charging).
2. Put the USB cable into lantern USB output port, then put the other
side of the cable into the charging device (mobile, tablet, etc.) The device
will then start charging.
3. When the lantern battery is discharged, it will stop charging.
“Low, High, Red, Off” light switch
Operation with audio function
To play audio from a Bluetooth device, you need to pair the device with the
lantern speaker.
1. On your Bluetooth device, turn on Bluetooth and scan for devices in its
Bluetooth menu.
2. Turn on the Bluetooth when powering up for the first time, the lantern
speaker is discoverable for 2 minutes and is ready for pairing. A short
sound will indicate the Bluetooth is on.
3. The device code of this lantern “BRUNTON C-ROCKER” will appear on the
device list of your Bluetooth device, select the lantern. The Bluetooth status
will show on your Bluetooth menu after pairing is established. The lantern
speaker is ready to play music.
Note: If the Bluetooth turns off after five minutes, it enters power saving mode. Slide the power
switch off and then turn on to wake the Bluetooth, and try pairing your device again. Repeat
step 3.
Note: The lantern speaker operates with a single pair devices mode. If you pair the speaker with
another device, the device least recently connected needs to be un-paired with the speaker first.
Repeat steps 2 and 3 above
Remark: Connect audio cable (not included) directly to AUX audio plug to play music without
Bluetooth connection.
(Different devices require
different charging cables
for charging - Cable(s)
not included.)
Status indicator :
ON
SEARCHING
Bluetooth devices
Turn on Bluetooth
Select this
25% battery life
75% battery life
BRUNTON C-ROCKER
CONNECT
Bluetooth devices
PAIRED
Bluetooth devices
Bluetooth devices
100% battery life
50% battery life
Trouble Shooting
The lantern speaker doesn’t work or it won’t pair
• Try moving your device closer.
• Is the lantern turned on and charged?
• Turn the Bluetooth off and then on to wake it.
• Is Bluetooth enabled on your device or computer?
• Try repeating the setup procedure in this guide or pair with a different
Bluetooth device.
• The speaker plays music from one device at a time. Unpair the device not
being used. (Refer to your device documentation for help.) Pair a new
device using the setup procedure.
• If pairing with a computer, specify the lantern speaker as the audio out
device on the computer.
09012015 V1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:09:15 08:49:18+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2015:09:15 08:49:18+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:09:15 08:49:18+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Format                          : application/pdf
Title                           : BR-Manual-CampRocker_1
Document ID                     : uuid:074c56bd-350b-4544-9999-a30013ab5bbe
Instance ID                     : uuid:11825ac3-8cc9-4531-8964-871d4bd56e02
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
For                             : Harrison Smiddy,
Bounding Box                    : 13 -828 1236 20
Container Version               : 11
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools