Food Automation Service Techniques FASTX-WIRE FASTX-Wire transmission system User Manual 229 51316 Rev B XwireInstall pmd
Food Automation - Service Techniques, Inc. FASTX-Wire transmission system 229 51316 Rev B XwireInstall pmd
Xwire Install Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 833086 |
| Application ID | NvzZMDkRKeFPaEJU4mWjsg== |
| Document Description | Xwire Install Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.26kB (440689 bits) |
| Date Submitted | 2007-08-23 00:00:00 |
| Date Available | 2007-08-23 00:00:00 |
| Creation Date | 2006-10-06 14:18:39 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2006-10-23 10:28:22 |
| Document Title | 229-51316 Rev B_XwireInstall.pmd |
| Document Creator | PageMaker 7.0 |
| Document Author: | mnarus |
the time is right. Installation Instructions · Universal Adapter · Bezel Adapter · Wireless.Gateway Adapter Universal Adapter for TRACKER® Timers, Fryers and Ovens Bezel Adapter for Fryers Wireless.Gateway Adapter This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited. 229-51316 Rev. B © 2006 Food Automation Service Techniques, Inc. 24/7 Toll-Free Technical Support 1-800-243-9271 (from the U.S., Canada and the Caribbean) XwireTM Adapter Installation Table of Contents Introduction Introduction ..................................................................... 2 Thank you for your purchase. In choosing FAST, you Installation: Universal Adapter for have chosen a product with over 35 years of innova- TRACKER Timers ................................................ 3 Installation: Universal Adapter for Fryers & Ovens .................................................. 4-5 Installation - Bezel Adapter for VC-210 & EM-99 Controllers ......................................................... 5-6 Installation - Wireless.Gateway Adapter ..................... 7 tion and quality manufacturing behind it. FAST’s new Xwire™ line of Mesh Network Protocol wireless communication products allow Foodservice and Restaurant Operators the ability to efficiently link multiple appliances and timers for synchronizing food equipment and monitoring inventory levels, energy consumption and usage levels. Customer Support, Warranty and Other Information ........................................11 The following will guide you through installing an Xwire Universal Adapter for FAST TRACKERTM Timers and fryers and ovens, the Xwire Bezel for VC210 and EM-99 Process Controllers, and the Wireless.Gateway Adapter. Changes or modifications not expressly approved by FAST, Inc. could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FAST is not liable for any use of product not in accordance with FAST’s installation and operating instructions. BEFORE USING THIS EQUIPMENT, OR FOR ANY QUESTIONS ON THE OPERATION OF THE APPLIANCE, CONSULT AND FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS FOUND IN THE APPLIANCE OPERATOR’S MANUAL SUPPLIED FROM THE MANUFACTURER OF THE APPLIANCE. Page 2 Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. XwireTM Adapter Installation Status LED Chart Universal Adapter for TRACKER® Timers REQUIRED PARTS (A) Xwire Universal Adapter for TRACKER Timers FAST Part No. 231-60208-01 (B) Xwire Harness for TRACKER Universal i. 12” FAST Part No. 222-50700-01 ii. 48” FAST Part No. 222-50700-02 (C) Velcro Brand Fastener INSTALLATION 1. Connect harness to the communication port on the top of the TRACKER Timer. 2. Connect other end of harness to the FAST Xwire Universal Adapter. Mount the Xwire Universal Adapter using the supplied Velcro. Note: Mount in a place that FAST Wireless.Gateway will receive signal. 3. Verify the LED sequence on the Xwire is correct per your application using the following information. LED Color LED Blink Rate Description Device is connected as a RED Solid On router Device is waiting for data RED Slow from its parent node Device is communicating with another device as a RED Very Fast router. Signal bars should exist Device is connected as a GREEN Solid On coordinator Device is communicating with another device as a GREEN Very Fast coordinator. Signal bars should exist. Device cannot communicate ½ sec ON, with the SCK device after ORANGE ½ sec OFF already connecting to the wireless network. Zigbee stack has returned an error (problem resetting the 2 sec ON, radio chip) or Device is ORANGE 2 sec OFF initializing either at start up or after manually changing PAN IDs Signal LEDs Bars NONE (0) ONE (1) TWO (2) THREE (3) Link Quality No signal or No messages received Moderate signal Good signal Excellent signal Special States Signal Strength Indicators LED Action Description Strobe effect using all LEDs Device is scanning the channels for available networks All LEDs blink on and off simultaneously every 500ms Device has detected a multiple SCK address conflict and is waiting for resolution 4. The TRACKER is now ready to be used as an Xwire wireless device. Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. Page 3 XwireTM Adapter Installation Universal Adapter for Fryers and Ovens 7. Mount controller in the back of the appliance and verify the LED sequence on the Xwire indicator is correct per your application using the following information. Signal Strength Indicators REQUIRED PARTS (A) Xwire Universal Adapter for Fryers and Ovens FAST Part No. 231-60208-01 (B) Self-tapping Connectors (included) FAST Part No. 141-51026 Qty. 2 (C) Xwire Harness: Choose One i. FAST Part No. 222-50702-01 ii. FAST Part No. 222-50701-01 iii. FAST Part No. 222-50701-02 (D) Velcro Brand Fastener INSTALLATION 1. Pull controller away from appliance. Locate wires numbered 1 and 3 in either the 15-pin connector or the 9-pin connector (depending on the controller) on the back of the controller. These are your 24VAC. 2. Clamp the self-tapping connector to these wires to provide a 24VAC output to the Xwire Bezel Adapter and also the two pigtail wires that are supplied. 3. Connect the two pigtail wire terminals to the pair coming from the harness. 4. Connect the 3- or 4-pin Molex (depending on controller) from the harness to the controller. 5. Drill a hole in the back of the appliance to feed harness through. 6. Connect harness to FAST Universal X-Wire and mount using Velcro tape that is supplied. Status LED Chart LED Color LED Blink Rate Description Device is connected as a RED Solid On router Device is waiting for data RED Slow from its parent node Device is communicating with another device as a RED Very Fast router. Signal bars should exist Device is connected as a GREEN Solid On coordinator Device is communicating with another device as a GREEN Very Fast coordinator. Signal bars should exist. Device cannot communicate ½ sec ON, with the SCK device after ORANGE ½ sec OFF already connecting to the wireless network. Zigbee stack has returned an error (problem resetting the 2 sec ON, radio chip) or Device is ORANGE 2 sec OFF initializing either at start up or after manually changing PAN IDs Note: Mount in place that FAST Gateway will receive signal. Page 4 Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. XwireTM Adapter Installation Signal LEDs Bars NONE (0) ONE (1) TWO (2) THREE (3) INSTALLATION Link Quality No signal or No messages received Moderate signal Good signal Excellent signal Special States LED Action Description Strobe effect using all LEDs Device is scanning the channels for available networks All LEDs blink on and off simultaneously every 500ms Device has detected a multiple SCK address conflict and is waiting for resolution 8. 1. Locate wires numbered 1 and 3 in the 9-pin connector on the VC-210 or EM-99. 2. Clamp self-tapping connector to these wires to provide a 24VAC output for the bezel. 3. Connect the two spade terminals to the pair coming from the bezel. The FAST controller is now ready to be used as an Xwire wireless device. Bezel Adapter for VC-210 and EM-99 Controllers REQUIRED PARTS (1) Xwire Bezel Adapter FAST Part No. 231-60206-01 (2) Self-tapping Connectors (included) FAST Part No. 141-51026 Qty. 2 Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. Page 5 XwireTM Adapter Installation INSTALLATION: Bezel Adapter for VC-210 and EM-99 Controllers, continued 4. Connect the 3-pin Molex connector on the bezel to the 3-pin Molex on the controller. 5. Position the Xwire bezel onto the front of the controller. Carefully, place the five bezel wires into the channel on the controller. Status LED Chart LED Color LED Blink Rate Description Device is connected as a RED Solid On router Device is waiting for data RED Slow from its parent node Device is communicating with another device as a RED Very Fast router. Signal bars should exist Device is connected as a GREEN Solid On coordinator Device is communicating with another device as a GREEN Very Fast coordinator. Signal bars should exist. Device cannot communicate ½ sec ON, with the SCK device after ORANGE ½ sec OFF already connecting to the wireless network. Zigbee stack has returned an error (problem resetting the 2 sec ON, radio chip) or Device is ORANGE 2 sec OFF initializing either at start up or after manually changing PAN IDs Signal LEDs 6. Install the controller on the fryer and verify the LED sequence is correct per your application using the following information. Signal Strength Indicators Bars NONE (0) ONE (1) TWO (2) THREE (3) Link Quality No signal or No messages received Moderate signal Good signal Excellent signal Special States LED Action Description Strobe effect using all LEDs Device is scanning the channels for available networks All LEDs blink on and off simultaneously every 500ms Device has detected a multiple SCK address conflict and is waiting for resolution 7. Page 6 The FAST controller is now ready to be used as an Xwire wireless device. Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. XwireTM Adapter Installation Status LED Chart Wireless.Gateway Adapter REQUIRED PARTS (A) Wireless.Gateway Adapter FAST Part No. 231-60207-01 (B) USB Cable, 5M FAST Part No. 141-15734 INSTALLATION 1. Connect USB cable to the communication port on the Wireless.Gateway. 2. Connect other end of USB cable to the USB port on your computer. 3. Verify the LED sequence on the Xwire is correct per your application using the following information. LED Color LED Blink Rate Description Device is connected as a RED Solid On router Device is waiting for data RED Slow from its parent node Device is communicating with another device as a RED Very Fast router. Signal bars should exist Device is connected as a GREEN Solid On coordinator Device is communicating with another device as a GREEN Very Fast coordinator. Signal bars should exist. Device cannot communicate ½ sec ON, with the SCK device after ORANGE ½ sec OFF already connecting to the wireless network. Zigbee stack has returned an error (problem resetting the 2 sec ON, radio chip) or Device is ORANGE 2 sec OFF initializing either at start up or after manually changing PAN IDs Signal LEDs Bars NONE (0) ONE (1) TWO (2) THREE (3) Link Quality No signal or No messages received Moderate signal Good signal Excellent signal Signal Strength Indicators Special States LED Action Description Strobe effect using all LEDs Device is scanning the channels for available networks All LEDs blink on and off simultaneously every 500ms Device has detected a multiple SCK address conflict and is waiting for resolution Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. Page 7 XwireTM Adapter Installation This page left intentionally blank. Page 8 Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. XwireTM Adapter Installation This page left intentionally blank. Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. Page 9 XwireTM Adapter Installation This page left intentionally blank. Page 10 Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. XwireTM Adapter Installation Warranty Customer Service and Technical Assistance FAST provides a limited oneyear warranty for its products (except probes and hoses for which the period is 90 days). A copy of the exact provisions of this warranty and the other terms and conditions of sale are available upon request. Our customer service department is available for orders and questions Monday through Friday between the hours of 8 AM and 5 PM EDT. Call us toll-free at 1-800-FASTRON (327-8766) if you’re in the US, Canada or the Caribbean, or at 203-378-6860 if you’re outside of these areas. Toll-free technical assistance is available 24 hours a day, 365 days a year by calling 1-800-243-9271 (from the U.S., Canada and the Caribbean) when help is needed immediately. You can also send an instant email message to a FAST technician, Monday through Friday, 8am-5pm EDT, by going to www.fastinc.com, selecting the ‘Support’ link at the top of the page, and clicking on ‘Email Us.’ Timer Operating Environment Please Note: The solid state components in this controller are designed to operate reliably in a temperature range up to 158°F / 70°C. Before installing this controller, it should be verified that the ambient temperature at the mounting location does not exceed 158°F / 70°C. Patents The products manufactured by FAST are protected under one or more of the following U.S. Patents: 4,782,445 4,812,625 4,812,963 4,864,498 4,911,068 4,920,948 5,043,860 5,171,974 5,331,575 5,539,671 5,711,606 5,723,846 5,726,424 5,875,430 6,142,666 6,339,930 6,401,467 6,505,546 6,581,391 7,015,433 Plus foreign patents and patents pending. Plus licensed patent: 5,973,297 Free Program for Service Exchanges FAST provides an Exchange Program, at no extra cost, if a unit should fail. In the event of failure, you have the option of (1) receiving a replacement product from our factory, freight prepaid; (2) exchanging the failed product for a replacement product at one of our authorized local service centers; or (3) selecting on-site repair or replacement of the failed unit by one of our authorized local service centers. To take advantage of this program, simply call our toll-free customer service number, 1-800-243-9271. If you elect to receive an exchange unit from the factory, a replacement unit will be sent immediately. Upon receipt of the replacement unit, simply return the failed unit to the factory, freight prepaid, using the same carton and packing material in which the replacement unit was shipped. The unit will be replaced free of charge, if still under warranty, and if the product shows no evidence of abuse or alteration. If the unit is not under warranty, you will pay repair charges and shipping costs to and from the factory. If you should elect on-site repair and the unit is under warranty, you will not be required to pay the costs of reasonable on-site labor, but will be required to pay the service agency’s travel charges to and from the on-site location. Any minor adjustment or calibration and any labor costs for the replacement of probes will be made at your expense. The FAST Exchange Program is available to any FAST Domestic Customer whose account is current, and applies to all FAST Timers, Computers and Controllers. Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B 24/7 Toll-Free Technical Support: 1-800-243-9271 The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited. Page 11 Food Automation Service Techniques, Inc. 905 Honeyspot Road Stratford, Connecticut 06615 USA Phone: Toll-Free Sales: Fax: International Callers: Web site: +1-203-377-4414 1-800-FASTRON (1-800-327-8766) +1-203-377-8187 +1-203-378-6860 www.fastinc.com Toll-Free Technical Assistance 24 Hours a Day, 365 Days a Year from the U.S., Canada and the Caribbean: 1-800-243-9271 INTERNATIONAL OFFICES United Kingdom 31 Saffron Court Southfields Business Park Basildon Essex SS15 6SS England Phone: +44-0 1268-544000 Fax: +44-0 1268-544500 Asia/Pacific 1803, 18F, No 922 Hengshan Rd Shanghai 200030, China Phone: +86 13916854613 #11-359, BLK 217, Bukit Batok ST 21 Singapore 650217 Phone: +65 98315927 Fax: +65 66658462 Specifications subject to change without notice. This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software within without prior written authorization is strictly prohibited. © 2006 Food Automation Service Techniques, Inc. Part Number: 229-51316 Rev. B Printed in the U.S.A. 06OCT2006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d6ce53b6-3e19-473b-9bf9-ca1526dbbe1c Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PageMaker 7.0 Modify Date : 2006:10:23 10:28:22-04:00 Create Date : 2006:10:06 14:18:39-04:00 Metadata Date : 2006:10:23 10:28:22-04:00 Document ID : uuid:4ce45e73-b6fa-4956-a159-1c6251400206 Instance ID : uuid:db3ff7f7-94a6-4348-8d8c-eb712ebe4da3 Format : application/pdf Title : 229-51316 Rev B_XwireInstall.pmd Creator : mnarus Author : mnarusEXIF Metadata provided by EXIF.tools