Foreign Trade Technocel T110 TYLT Vu Solo User Manual IC3603 TYLT VU Solo Guide ai

Download:
Mirror Download [FCC.gov]
Document ID	2397344
Application ID	/mQaUS6rBmLo32JOKoOnfg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.56kB (382059 bits)
Date Submitted	2014-09-22 00:00:00
Date Available	2014-09-25 00:00:00
Creation Date	2014-08-22 17:13:34
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-08-22 17:13:34
Document Title	IC3603 TYLT VU Solo - Guide.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mdigges

ENG PACKAGE CONTENTS
Wireless
Charger
Vu Solo Wireless Charger
Micro-USB power cable
w/ Alignment Ledge
POWERING DEVICE
Power-up the Vu Solo by inserting the included
Micro-USB power cable into the power port. Insert
the included USB cable into a USB Power Supply.*
For more information on the Qi, wireless charging, Qi™ Charging
Standard and a list of compatible smartphones, please visit:
www.TYLT.com/VÜ
©2014 TYLT. All rights reserved. TYLT® and the TYLT® logo are
registered trademarks of Foreign Trade Corp. Other marks are
the property or their respective owners.
IC3603
POSITIONING YOUR DEVICE
Place your Qi™ compatible device on the charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds every ¼ inch (or 5mm).
Once the device is charging, the alignment ledge
can be set to enable quick placement next time the
Vu Solo is used. Simply move the alignment ledge
forward until it touches the top of the devices.
CHARGING YOUR DEVICE
Next time the device is ready to wirelessly charge,
make sure the top of the device is touching the
ledge as you set it onto the pad, and charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
While in Standby mode, the LED is OFF. Solid green
LED indicates Vu Solo is delivering full power. Slow
blinking indicates limited power source.For best
performance, use a USB power supply that delivers
more current.
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
power output of greater than 1.8A.
If the green LED is on but no power is being
received by the device, there may be a metal object
near the coils. Pick up the device and remove
foreign objects and place device back on the Vu
Solo. This is a safety feature and normal operation.
TROUBLESHOOTING
Under any type of electronic error condition, the
Green LED will begin to Blink. A fast blink indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and allow it to dry. Do not disassemble or
attempt repair.
Do not store the device in high or low temperatures.
STICKY SUCTION - Place Charger on a dry,
clean, flat, smooth surface. It will adhere
immediately without any pressure needed. To
remove, pull up one corner slowly and gently. Be
Patient. To clean sticky suction, use soft, damp cloth
or scotch tape. Do NOT use solvents, alcohol or
cleaners.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A
* Note: USB power supply is not included.
FRA PACKAGE CONTENTS
Vu Solo Wireless Charger
Micro-USB power
cable
w/ Alignment
gnment Ledge
POWERING
RING DDEVICE
Power-up the
he Vu Solo by insertin
inserting the included
ncluded
Micro-USB power cable into the power port. Insert
the includedd USB cable into a US
USB Powerr Supply.*
POSITIONING
TIONING YOUR DEVICE
Place your Qi™ comp
compatible device on thee chargin
charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds everyy ¼ inch (or 5mm).
Once th
the device
ce is charging, the alignm
alignment ledge
can be set
se to enable quick placement next
ne time the
alignment ledge
Vu Solo iis used.
ed. Simply move the alignm
forward until it touches the top of the ddevices.
CHARGING
CH
ING YOUR DEVICE
Next ttime thee device is ready to wireless
wirelessly charge,
make sure thee top of the device is touch
touching the
ledge as you set
et it onto the pad, and ch
charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
NDICATOR
While in Standby
ndby mode, the LED is OOFF. Solid green
LED indicates
es Vu Solo is delivering full
fu power.
ower. Slow
blinking indicates
icates lim
limited power source.For
For best
performance,
e, use a USB power ssupply that
hat delivers
more current.
nt.
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
ppower output of greater than 1.8A.
If the gr
ED is on but no power is bbeing
green LED
received by the
he device, there may be a m
metal object
near the coils.. Pick up the device and rem
remove
foreign oobjects
ts and place device back on the Vu
Solo. Thi
This is a safety feature and normal operation.
TROUBLESHOOTING
SHOOT
Under any type
ype of el
electronic error condition,
tion, the
Green LED will begin to Blink. A fast blinkk indicat
indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and
nd allow it to dry. Do not disassemble
ssemble or
attempt repair.
air.
Do not storee the device in high or low temperatures.
mperatures.
STICKYY SUCTIO
SUCTION - Place Charger onn a dry,
clean, flat, smooth
will adheree
mooth surface. It wi
immediatelyy without any pressu
pressure needed.
ed. To
remove, pulll up one corner slowly and gently.
ently. Be
Patient. To clean
sticky suction, use soft, damp cloth
lean stic
cl
or scotch tape.
pe. Do NNOT use solvents, alcohol
hol or
cleaners.
Vu Solo Wireless Charger
Micro-USB power
cable
w/ Alignment
gnment Ledge
POWERING
RING DDEVICE
Power-up the
he Vu Solo by insertin
inserting the included
ncluded
Micro-USB power cable into the power port. Insert
the includedd USB cable into a US
USB Powerr Supply.*
POSITIONING
TIONING YOUR DEVICE
Place your Qi™ comp
compatible device on thee chargin
charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
* Note: USB power supply is not included.
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds everyy ¼ inch (or 5mm).
Once th
the device
ce is charging, the alignm
alignment ledge
can be set
se to enable quick placement next
ne time the
Vu Solo iis used.
ed. Simply move the alignm
alignment ledge
forward until it touches the top of the ddevices.
CHARGING
CH
ING YOUR DEVICE
Next ttime thee device is ready to wireless
wirelessly charge,
make sure thee top of the device is touch
touching the
ledge as you set
et it onto the pad, and ch
charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
NDICATOR
While in Standby
ndby mode, the LED is OOFF. Solid green
LED indicates
es Vu Solo is delivering full
fu power.
ower. Slow
blinking indicates
icates lim
limited power source.For
For best
performance,
e, use a USB power ssupply that
hat delivers
more current.
nt.
TROUBLESHOOTING
SHOOT
Under any type
ype of el
electronic error condition,
tion, the
Green LED will begin to Blink. A fast blinkk indicat
indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
smart
only be usedd at normal indoor room co
conditions.
Place charger
c er on a hard flat surface. For
Fo best
results, use the supplied USB power cable
ca and a
5V USB power
wer supply with an output ppower of
1.8A oor greater.
ater. Vu Solo may become warm
ging. Avoid direct contact w
during charging.
with
mable materials. Avoid con
highly flammable
contact with
re finishes
delicate furniture
finishes.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A
* Note: USB power supply is not included.
ITA PACKAGE CONTENTS
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
only be used at normal indoor room conditions.
Place charger on a hard flat surface. For best
results, use the supplied USB power cable and a
5V USB power supply with an output power of
1.8A or greater. Vu Solo may become warm
during charging. Avoid direct contact with
highly flammable materials. Avoid contact with
delicate furniture finishes.
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
ppower output of greater than 1.8A.
If the gr
green LED
ED is on but no power is bbeing
received by the
he device, there may be a m
metal object
near the coils.. Pick up the device and rem
remove
foreign oobjects
ts and place device back on the Vu
Solo. Thi
This is a safety feature and normal operation.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and
nd allow it to dry. Do not disassemble
ssemble or
attempt repair.
air.
Do not storee the device in high or low temperatures.
mperatures.
STICKYY SUCTIO
SUCTION - Place Charger onn a dry,
clean, flat, smooth
mooth surface. It wi
will adheree
immediatelyy without any pressu
pressure needed.
ed. To
remove, pulll up one corner slowly and gently.
ently. Be
Patient. To clean
lean stic
sticky suction, use soft, damp cloth
cl
or scotch tape.
pe. Do NNOT use solvents, alcohol
hol or
cleaners.
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
smart
only be usedd at normal indoor room co
conditions.
Place charger
c er on a hard flat surface. For
Fo best
results, use the supplied USB power cable
ca and a
5V USB power
wer supply with an output ppower of
1.8A oor greater.
ater. Vu Solo may become warm
during charging.
ging. Avoid direct contact w
with
highly flammable
mable materials. Avoid con
contact with
delicate furniture
re finishes
finishes.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A
FCC Information
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
To comply with FCC and other RF exposure
requirements, please maintain a distance of 20cm
between the charger and your body when in use.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Changes or modifications made to this equipment not
expressly approved by the manufacturer may void the
FCC authorization to operate this equipment.
FCC ID: SZQ-T110
DEU PACKAGE CONTENTS
Vu Solo Wireless Charger
Micro-USB power
cable
w/ Alignment
gnment Ledge
POWERING
RING DDEVICE
Power-up the
he Vu Solo by insertin
inserting the included
ncluded
Micro-USB power cable into the power port. Insert
the includedd USB cable into a US
USB Powerr Supply.*
POSITIONING
TIONING YOUR DEVICE
Place your Qi™ comp
compatible device on thee chargin
charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds everyy ¼ inch (or 5mm).
Once th
the device
ce is charging, the alignm
alignment ledge
can be set
se to enable quick placement next
ne time the
alignment ledge
Vu Solo iis used.
ed. Simply move the alignm
forward until it touches the top of the ddevices.
CHARGING
CH
ING YOUR DEVICE
Next ttime thee device is ready to wireless
wirelessly charge,
make sure thee top of the device is touch
touching the
ledge as you set
et it onto the pad, and ch
charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
NDICATOR
While in Standby
ndby mode, the LED is OOFF. Solid green
LED indicates
es Vu Solo is delivering full
fu power.
ower. Slow
blinking indicates
icates lim
limited power source.For
For best
performance,
e, use a USB power ssupply that
hat delivers
more current.
nt.
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
ppower output of greater than 1.8A.
green LED
If the gr
ED is on but no power is bbeing
metal object
received by the
he device, there may be a m
remove
near the coils.. Pick up the device and rem
foreign oobjects
ts and place device back on the Vu
This is a safety feature and normal operation.
Solo. Thi
TROUBLESHOOTING
SHOOT
Under any type
ype of el
electronic error condition,
tion, the
Green LED will begin to Blink. A fast blinkk indicat
indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and
nd allow it to dry. Do not disassemble
ssemble or
attempt repair.
air.
Do not storee the device in high or low temperatures.
mperatures.
STICKYY SUCTIO
SUCTION - Place Charger onn a dry,
clean, flat, smooth
mooth surface. It wi
will adheree
immediatelyy without any pressu
pressure needed.
ed. To
ently. Be
remove, pulll up one corner slowly and gently.
lean stic
cl
Patient. To clean
sticky suction, use soft, damp cloth
pe. Do NNOT use solvents, alcohol
hol or
or scotch tape.
cleaners.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A
* Note: USB power supply is not included.
ESP PACKAGE CONTENTS
Vu Solo Wireless Charger
Micro-USB power
cable
w/ Alignment
gnment Ledge
POWERING
RING DDEVICE
Power-up the
he Vu Solo by insertin
inserting the included
ncluded
Micro-USB power cable into the power port. Insert
the includedd USB cable into a US
USB Powerr Supply.*
POSITIONING
TIONING YOUR DEVICE
Place your Qi™ comp
compatible device on thee chargin
charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds everyy ¼ inch (or 5mm).
Once th
the device
ce is charging, the alignm
alignment ledge
can be set
se to enable quick placement next
ne time the
Vu Solo iis used.
ed. Simply move the alignm
alignment ledge
forward until it touches the top of the ddevices.
CHARGING
CH
ING YOUR DEVICE
Next ttime thee device is ready to wireless
wirelessly charge,
make sure thee top of the device is touch
touching the
ledge as you set
et it onto the pad, and ch
charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
NDICATOR
While in Standby
ndby mode, the LED is OOFF. Solid green
LED indicates
es Vu Solo is delivering full
fu power.
ower. Slow
blinking indicates
icates lim
limited power source.For
For best
performance,
e, use a USB power ssupply that
hat delivers
more current.
nt.
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
ppower output of greater than 1.8A.
If the gr
green LED
ED is on but no power is bbeing
received by the
he device, there may be a m
metal object
near the coils.. Pick up the device and rem
remove
foreign oobjects
ts and place device back on the Vu
Solo. Thi
This is a safety feature and normal operation.
TROUBLESHOOTING
SHOOT
Under any type
ype of el
electronic error condition,
tion, the
Green LED will begin to Blink. A fast blinkk indicat
indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and
nd allow it to dry. Do not disassemble
ssemble or
attempt repair.
air.
Do not storee the device in high or low temperatures.
mperatures.
STICKYY SUCTIO
SUCTION - Place Charger onn a dry,
clean, flat, smooth
mooth surface. It wi
will adheree
immediatelyy without any pressu
pressure needed.
ed. To
remove, pulll up one corner slowly and gently.
ently. Be
Patient. To clean
lean stic
sticky suction, use soft, damp cloth
cl
or scotch tape.
pe. Do NNOT use solvents, alcohol
hol or
cleaners.
Vu Solo Wireless Charger
Micro-USB power
cable
w/ Alignment
gnment Ledge
POWERING
RING DDEVICE
Power-up the
he Vu Solo by insertin
inserting the included
ncluded
Micro-USB power cable into the power port. Insert
the includedd USB cable into a US
USB Powerr Supply.*
POSITIONING
TIONING YOUR DEVICE
Place your Qi™ comp
compatible device on thee chargin
charging
pad to begin charging. To find your devices
charging spot, keep your device centered on the
pad horizontally. Move your device forward or
* Note: USB power supply is not included.
backward slowly until your device starts charging.
If the device does not start charging, continue to
move your device slowly forward or backward,
stopping for 2 seconds everyy ¼ inch (or 5mm).
Once th
the device
ce is charging, the alignm
alignment ledge
can be set
se to enable quick placement next
ne time the
Vu Solo iis used.
ed. Simply move the alignm
alignment ledge
forward until it touches the top of the ddevices.
CHARGING
CH
ING YOUR DEVICE
Next ttime thee device is ready to wireless
wirelessly charge,
make sure thee top of the device is touch
touching the
ledge as you set
et it onto the pad, and ch
charging
should begin seamlessly.
You can also use the alignment tabs located on
either side of the silicone pad to help visually align
to a devices features. Check www.tylt.com/vu-solo
for more information and a demonstration of
alignment.
LED INDICATOR
NDICATOR
While in Standby
ndby mode, the LED is OOFF. Solid green
LED indicates
es Vu Solo is delivering full
fu power.
ower. Slow
blinking indicates
icates lim
limited power source.For
For best
performance,
e, use a USB power ssupply that
hat delivers
more current.
nt.
TROUBLESHOOTING
SHOOT
Under any type
ype of el
electronic error condition,
tion, the
Green LED will begin to Blink. A fast blinkk indicat
indicates
a Fault. Remove the phone and place it back on the
Vu Solo. If problem persists, unplug the Vu Solo
from power source and re-connect it.
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
smart
only be usedd at normal indoor room co
conditions.
Place charger
c er on a hard flat surface. For
Fo best
results, use the supplied USB power cable
ca and a
5V USB power
wer supply with an output ppower of
1.8A oor greater.
ater. Vu Solo may become warm
during charging.
ging. Avoid direct contact w
with
highly flammable
mable materials. Avoid con
contact with
delicate furniture
re finishes
finishes.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A
* Note: USB power supply is not included.
PRT PACKAGE CONTENTS
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
smart
only be usedd at normal indoor room co
conditions.
Place charger
c er on a hard flat surface. For
Fo best
results, use the supplied USB power cable
ca and a
5V USB power
wer supply with an output ppower of
1.8A oor greater.
ater. Vu Solo may become warm
during charging.
with
ging. Avoid direct contact w
highly flammable
contact with
mable materials. Avoid con
delicate furniture
finishes.
re finishes
If LED is blinking slowly, power is being
transmitted, but may be slower than optimal. For
optimal results, use a USB power supply with a
ppower output of greater than 1.8A.
If the gr
green LED
ED is on but no power is bbeing
received by the
he device, there may be a m
metal object
near the coils.. Pick up the device and rem
remove
foreign oobjects
ts and place device back on the Vu
Solo. Thi
This is a safety feature and normal operation.
CARE AND MAINTENANCE
GENERAL - Keep Device Dry. Do NOT expose the
device to liquids. If device gets wet, immediately
unplug it and
nd allow it to dry. Do not disassemble
ssemble or
attempt repair.
air.
Do not storee the device in high or low temperatures.
mperatures.
STICKYY SUCTIO
SUCTION - Place Charger onn a dry,
clean, flat, smooth
mooth surface. It wi
will adheree
immediatelyy without any pressu
pressure needed.
ed. To
remove, pulll up one corner slowly and gently.
ently. Be
Patient. To clean
lean stic
sticky suction, use soft, damp cloth
cl
or scotch tape.
pe. Do NNOT use solvents, alcohol
hol or
cleaners.
CAUTION
The Vu Solo is for charging wireless charging
enabled and Qi™ Charging Standard compatible
smartphones only. The charging unit should
smart
only be usedd at normal indoor room co
conditions.
Place charger
c er on a hard flat surface. For
Fo best
results, use the supplied USB power cable
ca and a
5V USB power
wer supply with an output ppower of
1.8A oor greater.
ater. Vu Solo may become warm
during charging.
ging. Avoid direct contact w
with
highly flammable
mable materials. Avoid con
contact with
delicate furniture
re finishes
finishes.
SPECIFICATIONS - Input: 5V, 1.8A • Output: 5V, 1A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mdigges
Create Date                     : 2014:08:22 17:13:34-07:00
Modify Date                     : 2014:08:22 17:13:34-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : IC3603 TYLT VU Solo - Guide.ai
Creator                         : mdigges
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Document ID                     : uuid:14f24d70-f810-468f-bd87-dcbdd86353dd
Instance ID                     : uuid:e2853310-cf99-4c35-b81e-1f0f78fa6649
Page Count                      : 2

EXIF Metadata provided by EXIF.tools