Foreign Trade Technocel T130 Verizon Wireless Charging Pad User Manual ICXXXX VERIZON VZ1C UserGuide ai

Download:
Mirror Download [FCC.gov]
Document ID	2383721
Application ID	6r8lMYrIyUL5FH6Akl8KtQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.9kB (123784 bits)
Date Submitted	2014-09-10 00:00:00
Date Available	2014-09-18 00:00:00
Creation Date	2014-08-19 14:30:07
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-08-22 18:26:47
Document Title	ICXXXX VERIZON VZ1C UserGuide.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mdigges

VERIZON
Qi WIRELESS
CHARGING PAD
Remove protective film from base. Place charger
on a dry, clean, flat, smooth surface. It will adhere
immediately without any pressure needed. To
remove or reposition, pull up one corner slowly and
gently.
Power-up the Verizon Qi Wireless Charging Pad by
inserting the included Micro-USB power cord into
the power port*.
Place your Qi™ compatible
device on the charging
pad to begin charging.
Specifications:
Verizon Qi Wireless Charging Pad
5V Power Adapter
Input: 5V / 1.8A
Output: 5V, 1A
ICXXXX
* Use the included power supply for fastest charging rate. Using
a power supply rated under 1.8A will cause the phone to charge
slower, indicated by a blinking red LED
CARE AND MAINTENANCE (General)
Keep Device Dry. Do NOT expose the device to liquids.
If device gets wet, immediately unplug it and allow
it to dry.
Do not disassemble or attempt repair.
Do not store the device in high or low temperatures.
To help achieve proper
charging placement next
time, make note of
buttons or home screen
features in relation to the
charging pad surface.
To find your devices
charging spot, keep your
device centered on the
pad horizontally.
Now move your device up
or down slowly until your
device starts charging.
Included:
When the red light
appears on the charging
pad, your device should be
charging.
Note: If your device does
not start charging,
continue to move your
device slowly up or down,
stopping for 2 seconds
every ¼ inch.
CARE AND MAINTENANCE (Sticky Suction)
While in Standby mode, the LED is OFF. Solid red
LED indicates Verizon Qi Wireless Charging Pad is
delivering full power.
LED indicator light
Charging
Standby
If the red LED is on but no power is being received
by the device, there may be a metal object near
the coils. Pick up the device and remove foreign
objects and place device back on the Verizon Qi
Wireless Charging Pad. This is a safety feature
and normal operation.
To clean the charging pad base, use soft, damp cloth
or scotch tape. Do NOT use solvents, alcohol
or cleaners.
CAUTIONS
The Verizon Qi Wireless Charging Pad works with Qi Wireless
Charging compatible smartphones and devices.
The charging unit should only be used at normal indoor
room conditions.
Place charger on a hard flat surface.
Use the supplied 5V 1.8A power adapter included with the
Verizon Qi Wireless Charging Pad.
The Verizon Qi Wireless Charging Pad and your
smartphone/device may become warm during charging.
Avoid direct contact with highly flammable materials.
Avoid contact with delicate furniture finishes.
FCC Information
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC and other RF exposure requirements, please
maintain a distance of 20cm between the charger and your body when
in use.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Changes or modifications made to this equipment not expressly
approved by the manufacturer may void the FCC authorization to
operate this equipment.
FCC ID: SZQ-T130

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mdigges
Create Date                     : 2014:08:19 14:30:07-07:00
Modify Date                     : 2014:08:22 18:26:47-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:08:22 18:26:47-07:00
Format                          : application/pdf
Title                           : ICXXXX VERIZON VZ1C UserGuide.ai
Creator                         : mdigges
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Document ID                     : uuid:2700be9d-4cf4-4a5c-a781-e81dbde00018
Instance ID                     : uuid:d9ca2336-5839-46b8-a8bb-7dc367a37566
Page Count                      : 1

EXIF Metadata provided by EXIF.tools