Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3392494 |
| Application ID | j0zRFnQsc7ZlHuJAwTVgfQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155kB (1937560 bits) |
| Date Submitted | 2017-05-16 00:00:00 |
| Date Available | 2017-05-17 00:00:00 |
| Creation Date | 2017-05-11 15:19:04 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2017-05-11 15:19:39 |
| Document Title | 鎵撳嵃 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
| Document Author: | Administrator |
QuickStart Guide 61;3 ͧͨ પâŤŢ˘âŹĐ°,58:/4+:,UXZXO'6)0+ĐâŤŢâŹŕ¨śâŤ ^ <ŢâŹSSMŐ ŕ˘âŤÚŚâŹŕ¨ŠÔӳ੸ઠ4/26/2017 CopyrightŠ 2017 Fortinet, Inc. All rights reserved. FortinetÂŽ, FortiGateÂŽ, FortiCareÂŽ and FortiGuardÂŽ, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinetâs General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinetâs internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features, or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations,and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. FortiAP C24JE QuickStart Guide QuickStart Guide 忍éĺŽčŁ ćĺ Register for Support Register your Fortinet product to receive: Technical Support New product features Protection from new threats Toll free: 1 866 648 4638 Phone: 1 408 486 7899 Fax: 1 408 235 7737 Email: register@fortinet.com Support technique Nouvelles fonctionnalitĂŠes du produit Protection contre de nouvelles menaces áⲴäźŕşÓ૱ áŕľâŢźÔਞ᥽ăáॠᢰáľá᤹ÇᯠÓ૱⢩âŠŘáÇá´° ᯠáąăąäą˘áŁ https://support.fortinet.com Vous devez enregistrer le produit pour recevoir: ä§ĺĐşâŢź La reistrazione ti permette di usufruire di: Supporto Tecnico Nuove funzionalita Proteezione dalle ultime minaccce Toll free: 1 866 648 4638 Phone: 1 408 486 7899 Fax: 1 408 235 7737 Email: register@fortinet.com Debe registrar el producto para recibir: Apoyo tĂŠcnico Nuevas funcionalidades del producto ProtecciĂłn contra ataques https://support.fortinet.com áⲴäźŕşÓ૱ áŕľâŢźÔਞ᥽ăáॠᢰáľá᤹ÇᯠÓ૱⢩âŠŘáÇá´° ᯠáąăąäą˘áŁ 忍éĺŽčŁ ćĺ ⲍ伢ČÇäşÇ áľá°ÇÉČąĎÉČŤÉÉÉăźŕŤąČⲍ伢ȧǏǝǤǾǪÇÇ â˛ŤäĽ˘ÇŽČ Ç˝â ČɊɲÉÉÇĄÇČČÇŽÇ ÉȡÉȳɳȽɼĎÉ⢠ᯠâăČä࣠⢠ᯠǏÇăľáąČČ乢á ä§ĺĐşâŢź Box Includes Before You Begin Write down details typically provided by your network administrator or ISP. Static IP address FortiAP device Mounting plate QuickStart Guide 1 Security Torx + 1 Philips screw 4 screws 4 screw anchors IP address ___________________ Subnet Mask ___________________ Default Gateway ___________________ Primary/Secondary DNS ___________________ DHCP It is normal to not require a hostname, but your ISP might require it. QuickStart Guide Video https://video.fortinet.com/video/177/ fortigate-and-fortiap Hostname ___________________ Device Guide Devi ce Gui de SYS LED No power On: Normal Flashing: Boot up 12VDC (optional) Mounting screw WiFi LED Green :Radio is enabled Flashing Green : Wireless activity FAP-C24JE WAN LED Not connected On: Connected Flashing: Activity LAN1 Reset button Press and hold for less than 10 seconds: Reboot 12 LAN2 LAN3/RJ45 PSE Pass-Through Press and hold for 10 seconds or longer: Reset to factory default 34 1,2, and 3 : LAN1/2/3 LED 4: PSE LED Not connected No PSE output On: Connected On: PSE output (max 4W) Flashing: Activity Flashing: PSE load over limit Note: PSE max output is 4W if FAP-C24JE is powered by 802.3af (15.4W) PSE max output is 802.3af (15.2W) if it is powered by 802.3at (25.5W) 10 CONSOLE WAN/POE RJ45 Pass-Throug 2 3 1 Wall-mount 2 Junction-box: NA, Japan, AUS/NZ 3 Junction-box: EU, UK, China, AUS/NZ 11 10 Installation 12 Basic Connection Network Core/FortiGate WAN/POE Connect the FortiAP device to a FortiGate controller or an Internet connection. 60mm Torx screwdriver is required (not included) Ensure that the Power over Ethernet (PoE) cable is connected to an applicable port on your FortiGate device or PoE injector. Electrical box pre-installed (not included) The unit can be mounted on a junction box using the mounting hardware provided. It is recommended to use the Security Torx screw to mount the FAP-C24JE to the mount plate for higher security (Torx screwdriver not included). Caution: Adequate grounding must be provided to the FortiAP unit and the PoE injector, in compliance with your local electrical code or regulations. The holes on the mounting hardware fit the electrical wall box of NA, EU, UK, China, Japan, AUS/NZ, and Korea. Warning: This device complies with IEEE 802.3af PoE specification. Do not use any PoE injectors that are not IEEE 802.3af compliant as they may damage your device. 11 14 13 12 FortiAP Setup Cloud provisioning with FortiCloud 1. Go to http://www.forticloud.com to sign in or create a new account. 2. Select an existing AP Network or create one. To create a new network, go to Add AP Network and enter an AP Network Name and AP Password. 3. From the left panel, select Deploy APs. No APs in Inventory: Add AP dialog box appears OR APs in Inventory: Click the +AP button FortiCloud FortiAP Internet WAN/POE OR B FortiGate secured on local network FortiGate FortiAP FortiCloud 3. Enter the unique F ortiCloud Key located on the FortiAP device, then click Submit. Ethernet Port WAN/POE Note: When creating a new network, the AP Password will be applied to all APs in that AP network. FortiAP Setup Video https://video.fortinet.com/video/92/basic-fortiapsetup 13 14 16 15 FortiAP page in the Web-based Manager: authorize and assign a profile to the device. Deployment through a FortiGate FortiGate support may be available for certain region codes. Please check the product datasheet or contact Fortinet sales for details. Also, please ensure that you are running the Fortinet recommended version of software on both FortiGate and FortiAP units. Please check support.fortinet.com for more information. If FortiGate is not on the same network as the FortiAP: If FortiGate is on the same network as the FortiAP: 1. Use FortiGate to preauthorize the FortiAP device. 2. Refer to the âAccess Point Deploymentâ section of the FortiWiFi and FortiAP Configuration Guide found at http://forti.net/ap-docs. 3. Plug the FortiAP into your local Ethernet connection. The FortiAP will self-configure. Or 1. Instead of preauthorizing, you can use the FortiGate to authorize the FortiAP device after you have connected the FortiAP to the network. 2. Within two minutes of connecting the FortiAP to the FortiGate, the device appears on the Managed 15 1. Log into FortiAP directly (IP address: 192.168.1.2) with username admin and no password, and specify the IP address of the controlling FortiGate. 2. Connect to FortiAP via the CLI (see âConnecting to FortiAP CLIâ in the FortiWiFi and FortiAP Configuration guide). 3. Specify the IP address of the controlling FortiGate: config capwap wtp acIpAddr 0. 0.0.0 4. The FortiAP device connects to FortiGate, and then you can authorize the FortiAP. 16 18 17 Cautions and Warnings Le produit doit ĂŞtre alimentĂŠ par un bloc d'alimentation Ă courant continu Regulatory Notices installation. source dâalimentation par Ethernet de 48 Vdc (PoE). Ambient operating temperature: 0C to 40C If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: homologuĂŠ UL de 12 Vdc, 1 A nominal marquĂŠ LPS ou Class 2 ou par une Environmental specifications there is no guarantee that interference will not occur in a particular This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: These limits are designed to provide reasonable protection against (1) this device may not cause harmful interference, and for a Class B digital device, pursuant to Part 15 of the FCC Rules. environnementales (TempĂŠrature de fonctionnement, tempĂŠrature de This equipment has been tested and found to comply with the limits (2) ) this device must accept any interference received; including interference that may cause undesired operation. (2) ) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits networks without routing to the outside plant. for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment 0 par IECTR 62101. Ce produit est uniquement connectĂŠ aux generates, uses, and can radiate radio frequency energy, and if it is rĂŠseaux PoE sans installation externe de routage. not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular environnementales (TempĂŠrature de fonctionnement, tempĂŠrature de RĂŠfĂŠrez Ă la Fiche Technique de ce produit pour les caractĂŠristiques and Altitude)r PowerUnit marked LPS or Class 2 and rated 12 Vdc, 1 A or by installation. 48 Vdc fromPoE source. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: homologuĂŠ UL de 12 Vdc, 1 A nominal marquĂŠ LPS ou Class 2 ou par une per IECTR 62101. This product is connected only to PoE stockage, humiditĂŠ et l'altitude). This product is intended to be supplied by a Listed Direct Plug-In source dâalimentation par Ethernet de 48 Vdc (PoE). networks without routing to the outside plant. Safety Attention: Ce matĂŠriel doit ĂŞtre utilisĂŠ dans un Environnement RĂŠseau Regulatory Notices Attention: Ce matĂŠriel doit ĂŞtre utilisĂŠ dans un Environnement RĂŠseau Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE Federal Communication Commission (FCC) â USA 0 par IECTR 62101. Ce produit est uniquement connectĂŠ aux Caution: This equipment is to be used in a Network Environment 0 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: rĂŠseaux PoE sans installation externe de routage. Safety (1) this device may not cause harmful interference, and This product is intended to be supplied by a Listed Direct Plug-In stockage, humiditĂŠ et l'altitude). harmful interference in residential installation. This equipment PowerUnit marked LPS or Class 2 and rated 12 Vdc, 1 A or by RĂŠfĂŠrez Ă la Fiche Technique de ce produit pour les caractĂŠristiques generates, uses, and can radiate radio frequency energy, and if it is 48 Vdc fromPoE source. and Altitude)r not installed and used in accordance with the instruction manual, it Federal Communication Commission (FCC) â USA Specifications (Operating Temperature, Storage Temperature, Humidity, may cause harmful interference to radio communications. However, RefeRefer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, RefeRefer to specific Product Model Data Sheet for Environmental Ambient operating temperature: 0C to 40C Environmental specifications Cautions and Warnings Le produit doit ĂŞtre alimentĂŠ par un bloc d'alimentation Ă courant continu 17 18 20 19 interference by one or more of the following measures: This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. aux appareils radio exempts de licence. Lâexploitation est autorisĂŠe aux deux transmitter must not be co-located or operating in conjunction with any other conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) antenna or transmitter. l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, Caution: Operation of this device is restricted to indoor use only. mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC radiation exposure limits set forth for an authority to operate the equipment by the party responsible for compliance could void the userâs WARNING: Any changes or modifications to this unit not expressly approved help. Consult the dealer or an experienced radio/TV technician for that to which the receiver is connected. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to Connect the equipment into an outlet on a circuit different from indoor environment. The band from 5600-5650MHz will be disabled by For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. the software during the manufacturing and cannot be changed by the end user. Industry Canada Equipment Standard for Digital Equipment (ICES) â Canada Le prĂŠsent appareil est conforme aux CNR dâIndustrie Canada applicables with minimum distance 20cm between the radiator and your body. This CAN ICES-3 (B) / NMB-3 (B) uncontrolled environment. This equipment should be installed and operated operation of the device. uncontrolled environment. This equipment should be installed and operated Innovation, Science and Economic Development (ISED) â Canada transmitter must not be co-located or operating in conjunction with any other with minimum distance 20cm between the radiator and your body. This This equipment complies with FCC radiation exposure limits set forth for an This device complies with Industry Canadaâs licence-exempt RSSs. interference, including interference that may cause undesired Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any authority to operate the equipment may not cause interference, and (2) this device must accept any Operation is subject to the following two conditions: (1) this device interference, including interference that may cause undesired Caution: Operation of this device is restricted to indoor use only. antenna or transmitter. by the party responsible for compliance could void the userâs operation of the device. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to This device complies with Industry Canadaâs licence-exempt RSSs. WARNING: Any changes or modifications to this unit not expressly approved Le prĂŠsent appareil est conforme aux CNR dâIndustrie Canada applicables Innovation, Science and Economic Development (ISED) â Canada help. aux appareils radio exempts de licence. Lâexploitation est autorisĂŠe aux deux indoor environment. The band from 5600-5650MHz will be disabled by Consult the dealer or an experienced radio/TV technician for conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) CAN ICES-3 (B) / NMB-3 (B) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, the software during the manufacturing and cannot be changed by the that to which the receiver is connected. mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. end user. Connect the equipment into an outlet on a circuit different from Industry Canada Equipment Standard for Digital Equipment (ICES) â Canada For product available in the USA/Canada market, only channel 1~11 Increase the separation between the equipment and receiver. can be operated. Selection of other channels is not possible. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Section 15.407 of the FCC Rules. This device meets all the other requirements specified in Part 15E, interference by one or more of the following measures: 20 22 19 21 Le gain maximal dâantenne permis (pour les dispositifs utilisant la bande Pour les produits disponibles aux Ătats-Unis / Canada du marchĂŠ, seul le 5725-5850 MHz)\ doit se conformer Ă la limite de p.i.r.e. spĂŠcifiĂŠe pour l'exposition et la conformitĂŠ de rf. Le dispositif rencontre l'exemption des limites courantes d'ĂŠvaluation users can obtain Canadian information on RF exposure and compliance. section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, with the e.i.r.p. limit; and the maximum antenna gain The device meets the exemption from the routine evaluation limits in specified for point-to-point and non-point-to-point operation as appropriate. permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point possible. and non point-to-point operation as appropriate. canal 1 Ă 11 peuvent ĂŞtre exploitĂŠs. SĂŠlection d'autres canaux n'est pas 5725-5850 MHz)\ doit se conformer Ă la limite de p.i.r.e. spĂŠcifiĂŠe pour Pour les produits disponibles aux Ătats-Unis / Canada du marchĂŠ, seul le 21 22 Le gain maximal dâantenne permis (pour les dispositifs utilisant la bande This transmitter must not be co-located or operating in conjunction bands 5250-5350 MHz and 5470-5725 MHz shall comply MHz shall be such that the equipment still complies with the e.i.r.p. limits Caution: The maximum antenna gain permitted for devices in the lâexploitation point Ă point et non point Ă point, selon le cas. with any other antenna or transmitter. This equipment should be The maximum antenna gain permitted for devices in the band 5725-5850 Caution: The device for the band 5150-5250 MHz is only for indoor installed and operated with a minimum distance of 20 centimeters entre le radiateur et votre corps. usage to reduce potential for harmful interference to dans la section 2.5 de RSS 102 et la conformitĂŠ Ă l'exposition de endommager les pĂŠriphĂŠriques LE-LAN co-channel mobile satellite systems. High-power radars RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur radars pourraient causer des interfĂŠrences et / ou ĂŞtre installĂŠ et actionnĂŠ avec une distance minimum de 20 centimètres are allocated as primary users (i.e. priority users) of the des bandes 5250-5350 MHz et 5650-5850 MHz et que ces temps qu'aucune autre antenne ou ĂŠmetteur. Cet ĂŠquipement devrait bands 5250-5350 MHz and 5650-5850 MHz and that these utilisateurs principaux (Ă savoir les utilisateurs prioritaires) Cet ĂŠmetteur ne doit pas ĂŞtre Co-placĂŠ ou ne fonctionnant en mĂŞme radars could cause interference and/or damage to LE-LAN Les radars Ă haute puissance sont dĂŠsignĂŠs comme between the radiator and your body. devices. installed and operated with a minimum distance of 20 centimeters Attention: Le dispositif de la bande 5150-5250 MHz est rĂŠservĂŠ Ă potentielle aux systèmes mobiles par satellite co-canal. un usage intĂŠrieur afin de rĂŠduire l'interfĂŠrence nuisible between the radiator and your body. with any other antenna or transmitter. This equipment should be potentielle aux systèmes mobiles par satellite co-canal. Cet ĂŠmetteur ne doit pas ĂŞtre Co-placĂŠ ou ne fonctionnant en mĂŞme un usage intĂŠrieur afin de rĂŠduire l'interfĂŠrence nuisible Les radars Ă haute puissance sont dĂŠsignĂŠs comme temps qu'aucune autre antenne ou ĂŠmetteur. Cet ĂŠquipement devrait Attention: Le dispositif de la bande 5150-5250 MHz est rĂŠservĂŠ Ă This transmitter must not be co-located or operating in conjunction utilisateurs principaux (Ă savoir les utilisateurs prioritaires) ĂŞtre installĂŠ et actionnĂŠ avec une distance minimum de 20 centimètres devices. l'exposition et la conformitĂŠ de rf. des bandes 5250-5350 MHz et 5650-5850 MHz et que ces entre le radiateur et votre corps. radars could cause interference and/or damage to LE-LAN RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur radars pourraient causer des interfĂŠrences et / ou The maximum antenna gain permitted for devices in the band 5725-5850 bands 5250-5350 MHz and 5650-5850 MHz and that these dans la section 2.5 de RSS 102 et la conformitĂŠ Ă l'exposition de endommager les pĂŠriphĂŠriques LE-LAN are allocated as primary users (i.e. priority users) of the Caution: The maximum antenna gain permitted for devices in the MHz shall be such that the equipment still complies with the e.i.r.p. limits Le dispositif rencontre l'exemption des limites courantes d'ĂŠvaluation co-channel mobile satellite systems. High-power radars bands 5250-5350 MHz and 5470-5725 MHz shall comply specified for point-to-point and non-point-to-point operation as appropriate. users can obtain Canadian information on RF exposure and compliance. usage to reduce potential for harmful interference to with the e.i.r.p. limit; and the maximum antenna gain section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, permitted for devices in the band 5725-5825 MHz shall Caution: The device for the band 5150-5250 MHz is only for indoor The device meets the exemption from the routine evaluation limits in comply with the e.i.r.p. limits specified for point-to-point lâexploitation point Ă point et non point Ă point, selon le cas. possible. and non point-to-point operation as appropriate. canal 1 Ă 11 peuvent ĂŞtre exploitĂŠs. SĂŠlection d'autres canaux n'est pas 24 23 Attention: Le gain maximal dâantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 European Conformity (CE) - EU MHz doit se conformer Ă la limite de p.i.r.e.; le gain This is a Class B product. In a domestic environment, this product maximal dâantenne permis (pour les dispositifs utilisant may cause radio interference, in which case the user may be la bande 5 725-5 825 MHz) doit se conformer Ă la limite required to take adequate measures. de p.i.r.e. spĂŠcifiĂŠe pour lâexploitation point Ă point et nonpoint Ă point, selon le cas. The product transmits within the frequency ranges and equal to or operate with the antenna types listed below with the maximum permissible less than the power listed below: gain and required antenna impedance for each antenna type indicated. 2412-2472MHz less than 20dBm Antenna types not included in this list, having a gain greater than the 5180-5240MHz less than 20dBm maximum gain indicated for that type, are strictly prohibited for use with 5260-5320MHz less than 20dBm * this device. 5500-5700MHz less than 20dBm * Note: * Only with DFS bands certification. This radio transmitter 7280B-24100045 has been approved by ISED to pour l'exploitation de l'ĂŠmetteur. gain est supĂŠrieur au gain maximal indiquĂŠ, sont strictement interdits d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le un gain admissible maximal et l'impĂŠdance requise pour chaque type pour fonctionner avec les types d'antenne ĂŠnumĂŠrĂŠs ci-dessous et ayant Le prĂŠsent ĂŠmetteur radio 7280B-24100045 a ĂŠtĂŠ approuvĂŠ par ISED Le prĂŠsent ĂŠmetteur radio 7280B-24100045 a ĂŠtĂŠ approuvĂŠ par ISED Note: * Only with DFS bands certification. 5500-5700MHz less than 20dBm * pour fonctionner avec les types d'antenne ĂŠnumĂŠrĂŠs ci-dessous et ayant 5260-5320MHz less than 20dBm * un gain admissible maximal et l'impĂŠdance requise pour chaque type 5180-5240MHz less than 20dBm d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le 2412-2472MHz less than 20dBm gain est supĂŠrieur au gain maximal indiquĂŠ, sont strictement interdits less than the power listed below: pour l'exploitation de l'ĂŠmetteur. The product transmits within the frequency ranges and equal to or this device. maximum gain indicated for that type, are strictly prohibited for use with Antenna types not included in this list, having a gain greater than the gain and required antenna impedance for each antenna type indicated. operate with the antenna types listed below with the maximum permissible This radio transmitter 7280B-24100045 has been approved by ISED to nonpoint Ă point, selon le cas. de p.i.r.e. spĂŠcifiĂŠe pour lâexploitation point Ă point et la bande 5 725-5 825 MHz) doit se conformer Ă la limite required to take adequate measures. maximal dâantenne permis (pour les dispositifs utilisant may cause radio interference, in which case the user may be MHz doit se conformer Ă la limite de p.i.r.e.; le gain This is a Class B product. In a domestic environment, this product utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 European Conformity (CE) - EU 23 24 Attention: Le gain maximal dâantenne permis pour les dispositifs
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : 鎵撳嵃 Creator : Administrator Metadata Date : 2017:05:11 15:19:39+08:00 Modify Date : 2017:05:11 15:19:39+08:00 Create Date : 2017:05:11 15:19:04+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 64 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9185 bytes, use -b option to extract) Instance ID : uuid:6227c4e0-d2f2-458d-9642-e3f361386aac Document ID : xmp.did:65868A79EB35E7118F9F80C7E7E66FD2 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:e78c17f2-1255-4a8e-a93c-9d1c76466d63 Derived From Document ID : xmp.did:1E452CA97634E7119A0CFF9AB5CCF19C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:1E452CA97634E7119A0CFF9AB5CCF19C, xmp.iid:65868A79EB35E7118F9F80C7E7E66FD2 History When : 2017:05:09 13:16:30+08:00, 2017:05:11 15:16:36+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 493.084804 Max Page Size H : 1902.502995 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaNeueLTPro-Ex, HelveticaNeueLTPro-Roman, HelveticaNeueLTStd-Lt, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Bd, MicrosoftSansSerif, MyriadPro-Regular, Wingdings-Regular, AdobeHeitiStd-Regular, SimSun, MicrosoftYaHei Font Family : Arial, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Microsoft Sans Serif, Myriad Pro, Wingdings, Adobe 黑体 Std, 宋体, 微软雅黑 Font Face : Regular, 53 Extended, 55 Roman, 45 Light, 55 Roman, 75 Bold, Regular, Regular, Regular, R, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type Font Version : Version 2.95, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.020;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 5.02, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 5.00, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.03, Version 6.02 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : Arial_4.ttf, HelveticaNeueLTPro-Ex.otf, HelveticaNeueLTPro-Roman.otf, HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTStd-Roman.otf, HelveticaNeueLTStd-Bd.otf, micross.ttf, MyriadPro-Regular_0.otf, wingding.ttf, AdobeHeitiStd-Regular.otf, simsun.ttc, msyh.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 485 C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 49.803898 Swatch Groups Colorants A : 69 Swatch Groups Colorants B : 55 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Acrobat Distiller 8.0.0 (Windows) Page Count : 1 Author : AdministratorEXIF Metadata provided by EXIF.tools