Fortress Auto WB060 The Multi-Angle Digital Wireless Parking Camera User Manual

Fortress Auto Int'l Ltd The Multi-Angle Digital Wireless Parking Camera

User Manual

The Multi-Angle Digital Wireless Parking Camera
1. The Multi-Angle Wireless Camera System 1.1. Parts Wireless Camera Wireless Receiver  The system spot movement—From left to right/ up to down  The system spot movement is marked with yellow frame  The system will display a yellow mark or icon when setting is confirmed 1.2. Information  Product compliant with FCC/CE rules.  Wireless technology WiFi 2.4GHz, IEEE802.11b/g.  Plug and play without paring @ auto power on.  Operating voltage DC 9V〜32V.  Operation temperature -10℃〜+70℃.  Storage temperature -30℃〜+70℃.  Operation distance around 167 feet.  4.3″ 480x272 high resolution LCD monitor.  LCD monitor brightness is adjustable, 8 levels.  Image quality 30fps @ VGA resolution.  Super view angle H=175∘.  Minimum illumination 0.1lux.  Quick boot up system around 1sec.  Shortest Image latency around 100ms.  Parking guide-line adjustable.  Water proof.  Ultrasonic distance detection.  Normal view & Top down view auto switching.
2. Introduction 2.1. Multi-Angle Wireless Camera is installed on the tail of the automobile. When you put into reverse gear, the system will operate automatically. You can monitor the environment through the screen when you are reversing. Besides, Wireless Camera is equipped with 58kHz ultrasonic device. When approaching obstacles around 120cm. It will switch to Top-Down View automatically.  Multi-Angle wireless camera with 58kHz ultrasonic sensor  LCD: 4.3” WQVGA(480 × 272)  Pairing(default)  Parking line auto switch on/off  Switch unit user’s guide Button Mode Press Function Enter Normal Long press 5 seconds Into setting mode - Settings Menu Short press Turn the guiding line ON/OFF Setting Long press 5 seconds N/A Short press Choose ▽ Normal Long press 5 seconds N/A Short press N/A Setting Long press 5 seconds N/A Short press Down／Right △ Normal Long press 5 seconds N/A Short press N/A Setting Long press 5 seconds N/A Short press Up／Left
2.2. Interface 2.2.1. Normal View / Top-Down View Wireless Camera can detect the distance and switch into Normal View / Top-Down View automatically. When obstacles is further than 120cm will display normal view： When approaching obstacles around 120cm. It will switch to Top-Down View automatically：
2.2.2. Settings Note：  This system use high brightness/yellow to mark the content. See above[Exit]  Contents： 2.2.2.1 Guide Line 2.2.2.2 Guide Line Default 2.2.2.3 Brightness No Name Function Switch Unit 1 Settings Menu N/A 2 Setting item Setting title N/A 3 Setting item corresponding button a. Setting item corresponding button b. High brightness display when setted YES 4 Exit a. High brightness display when setted b. Back to Camera mode YES，Default
Guide Line Guide line setting/display. Buttons function (1)Guide Line Setting A. Adjustment of the guiding line position. No Name Function Switch Unit 1 Adjust Press ENTER and adjust the guide line YES，Default 2 Save Press△、▽ Key to move the spot into position[Guide Line] [Save]、Press ENTER and saved, then exit setting. YES 3 Cancel Press△、▽ Key to move the spot into position[Guide Line] [Cancel]、 Press ENTER and not Saved, then exit setting YES 4 Default Press△、▽ Key to move the spot into position[Guide Line] [Default]、Press ENTER, then back to default setting. YES No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES
B. Guide line adjustment (horizontal) C. Left side guide line front point adjustment No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES No Name Function Switch Unit 1 Adjustment Press △ Key moved right for one pixel. Press ▽ Key moved left for one pixel. Press Switch Unit ENTER Key to adjust up/down for the guide point. YES No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES
D. Left side guide line back point adjustment E. Right side guide line front point adjustment No Name Function Switch Unit 1 Adjustment Press △ Key moved right for one pixel. Press ▽ Key moved left for one pixel. Press Switch Unit ENTER Key to adjust up/down for the guide point. YES No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES No Name Function Switch Unit 1 Adjustment Press △ Key moved right for one pixel. Press ▽ Key moved left for one pixel. Press Switch Unit ENTER Key to adjust up/down for the guide point. YES
F. Right side guide line back point adjustment No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES No Name Function Switch Unit 1 Adjustment Press △ Key moved right for one pixel. Press ▽ Key moved left for one pixel. Press Switch Unit ENTER Key to adjust up/down for the guide point. YES No Name Function Switch Unit 1 Adjustment Press △ Key moved up for one pixel. Press ▽ Key moved down for one pixel. Press ENTER Key switch to next adjustment point(position) YES
2.2.2.2 Guide Line Default 2.2.2.3 Brightness No Name Function Switch Unit 1 ON / OFF Press Enter Key to change the display ON: Guide line display on. OFF: Guide line display off. YES No Name Function Switch Unit 1 Brightness a. Adjustment the brightness press△、▽ key，press△ to increase，press▽to decrease the level of brightness b. Brightness level from 1~8, brighter as level increased c. Default setting as 7 YES
3. Product and accessories. Name Items Wireless Camera Wireless Receiver Stand Cable tie Wire clip Screws & Cover Screwdriver
4. Precautions.  Parking system just for reference only, for your safety, please confirm the actual surroundings.  Please pay attention to camera installation, red line then positive, black line then negative.  This product is waterproof, do not rinse directly with water cannons.  Ultrasonic sensor distance range is around 120cm  If Sensor dysfunction, try adjusting the angle of the probe.
“USER MANUAL” Compliance Statement § 15.21 & 15.105  EB937 FCC ID：2AJNIEB937  WB060 FCC ID：2AJNIWB060 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: To assure continued FCC compliance: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: To assure continued FCC compliance: 1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu