Fortress Auto WB060 The Multi-Angle Digital Wireless Parking Camera User Manual

Fortress Auto Int'l Ltd The Multi-Angle Digital Wireless Parking Camera

User Manual

Download: Fortress Auto WB060 The Multi-Angle Digital Wireless Parking Camera User Manual
Mirror Download [FCC.gov]Fortress Auto WB060 The Multi-Angle Digital Wireless Parking Camera User Manual
Document ID3171579
Application IDVCYrX/MjkAo/eyY6y70uYA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize137.37kB (1717090 bits)
Date Submitted2016-10-23 00:00:00
Date Available2016-10-24 00:00:00
Creation Date2016-10-05 10:18:28
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2016-10-20 16:38:50
Document TitleUser Manual
Document CreatorMicrosoft® Word 2013
Document Author: Liu Chien Tsun (劉建村 Besta)

The Multi-Angle
Digital Wireless
Parking Camera
1. The Multi-Angle Wireless Camera System
1.1. Parts
Wireless Camera
Wireless Receiver
 The system spot movement—From left to right/ up to down
 The system spot movement is marked with yellow frame
 The system will display a yellow mark or icon when setting is confirmed
1.2. Information


















Product compliant with FCC/CE rules.
Wireless technology WiFi 2.4GHz, IEEE802.11b/g.
Plug and play without paring @ auto power on.
Operating voltage DC 9V〜32V.
Operation temperature -10℃〜+70℃.
Storage temperature -30℃〜+70℃.
Operation distance around 167 feet.
4.3″ 480x272 high resolution LCD monitor.
LCD monitor brightness is adjustable, 8 levels.
Image quality 30fps @ VGA resolution.
Super view angle H=175∘.
Minimum illumination 0.1lux.
Quick boot up system around 1sec.
Shortest Image latency around 100ms.
Parking guide-line adjustable.
Water proof.
Ultrasonic distance detection.
Normal view & Top down view auto switching.
2. Introduction
2.1.
Multi-Angle Wireless Camera is installed on the tail of the automobile. When
you put into reverse gear, the system will operate automatically. You can
monitor the environment through the screen when you are reversing. Besides,
Wireless Camera is equipped with 58kHz ultrasonic device. When approaching
obstacles around 120cm. It will switch to Top-Down View automatically.
 Multi-Angle wireless camera with 58kHz ultrasonic sensor
 LCD: 4.3” WQVGA(480 × 272)
 Pairing(default)
 Parking line auto switch on/off

Switch unit user’s guide
Button
Enter
Mode
Normal
Setting
▽
Normal
Setting
△
Normal
Setting
Press
Function
Long press 5 seconds
Into setting mode - Settings Menu
Short press
Turn the guiding line ON/OFF
Long press 5 seconds
N/A
Short press
Choose
Long press 5 seconds
N/A
Short press
N/A
Long press 5 seconds
Short press
N/A
Down/Right
Long press 5 seconds
N/A
Short press
N/A
Long press 5 seconds
N/A
Up/Left
Short press
2.2. Interface
2.2.1.Normal View / Top-Down View
Wireless Camera can detect the distance and switch into Normal View / Top-Down
View automatically.
When obstacles is further than 120cm will display normal view:
When approaching obstacles around 120cm. It will switch to Top-Down View
automatically:
2.2.2.Settings
No
Name
Function
Switch Unit
Settings
Menu
N/A
Setting item
Setting title
N/A
Setting item
corresponding button
a. Setting item corresponding button
b. High brightness display when setted
YES
Exit
a. High brightness display when setted
b. Back to Camera mode
YES,Default
Note:
 This system use high brightness/yellow to mark the content. See
above[Exit]
 Contents:
2.2.2.1 Guide Line
2.2.2.2 Guide Line Default
2.2.2.3 Brightness
Guide Line
Guide line setting/display. Buttons function
(1)Guide Line Setting
No
Name
Adjust
Save
Function
Press ENTER and adjust the guide line
Switch Unit
YES,Default
Press△、▽ Key to move the spot into position[Guide Line] [Save]、 YES
Press ENTER and saved, then exit setting.
Cancel
Default
Press△、▽ Key to move the spot into position[Guide Line] [Cancel]、 YES
Press ENTER and not Saved, then exit setting
Press△、▽ Key to move the spot into position[Guide Line] [Default]、YES
Press ENTER, then back to default setting.
A. Adjustment of the guiding line position.
No
Name
Adjustment
Function
Press △ Key moved up for one pixel.
Press ▽ Key moved down for one pixel.
Press ENTER Key switch to next adjustment point(position)
Switch Unit
YES
B. Guide line adjustment (horizontal)
No
Name
Function
Press △ Key moved up for one pixel.
Adjustment
Switch Unit
YES
Press ▽ Key moved down for one pixel.
Press ENTER Key switch to next adjustment point(position)
C. Left side guide line front point adjustment
No
Name
Adjustment
Function
Press △ Key moved right for one pixel.
Press ▽ Key moved left for one pixel.
Switch Unit
YES
Press Switch Unit ENTER Key to adjust up/down for the guide point.
No
Name
Function
Press △ Key moved up for one pixel.
Adjustment
Press ▽ Key moved down for one pixel.
Press ENTER Key switch to next adjustment point(position)
Switch Unit
YES
D. Left side guide line back point adjustment
No
Name
Adjustment
Function
Press △ Key moved right for one pixel.
Press ▽ Key moved left for one pixel.
Switch Unit
YES
Press Switch Unit ENTER Key to adjust up/down for the guide point.
No
Name
Adjustment
Function
Press △ Key moved up for one pixel.
Press ▽ Key moved down for one pixel.
Switch Unit
YES
Press ENTER Key switch to next adjustment point(position)
E. Right side guide line front point adjustment
No
Name
Function
Press △ Key moved right for one pixel.
Adjustment
Press ▽ Key moved left for one pixel.
Press Switch Unit ENTER Key to adjust up/down for the guide point.
Switch Unit
YES
No
Name
Function
Press △ Key moved up for one pixel.
Adjustment
Switch Unit
YES
Press ▽ Key moved down for one pixel.
Press ENTER Key switch to next adjustment point(position)
F. Right side guide line back point adjustment
No
Name
Adjustment
Function
Switch Unit
Press △ Key moved right for one pixel.
Press ▽ Key moved left for one pixel.
YES
Press Switch Unit ENTER Key to adjust up/down for the guide point.
No
Name
Function
Press △ Key moved up for one pixel.
Adjustment
Press ▽ Key moved down for one pixel.
Press ENTER Key switch to next adjustment point(position)
Switch Unit
YES
2.2.2.2
No
2.2.2.3
No
Guide Line Default
Name
ON / OFF
Function
Press Enter Key to change the display
ON: Guide line display on.
OFF: Guide line display off.
YES
Brightness
Name
Function
a.
Switch Unit
Brightness
Adjustment the brightness press△、▽ key,press△ to
increase,press▽to decrease the level of brightness
b.
c.
Brightness level from 1~8, brighter as level increased
Default setting as 7
Switch
Unit
YES
3. Product and accessories.
Name
Items
Wireless Camera
Wireless Receiver
Stand
Cable tie
Wire clip
Screws & Cover
Screwdriver
4. Precautions.
 Parking system just for reference only, for your safety, please confirm
the actual surroundings.
 Please pay attention to camera installation, red line then positive,
black line then negative.
 This product is waterproof, do not rinse directly with water cannons.
 Ultrasonic sensor distance range is around 120cm
 If Sensor dysfunction, try adjusting the angle of the probe.
“USER MANUAL” Compliance Statement § 15.21 &
15.105
 EB937 FCC ID:2AJNIEB937
 WB060 FCC ID:2AJNIWB060
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
installed and
not
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To
assure continued FCC compliance:
CAUTION:
1. Any changes or modifications not expressly approved by the grantee of this device could
To
assure
continued
FCC compliance:
void
the user's
authority
to operate the equipment.
2.Any
Thischanges
equipment
complies with
FCC
radiation
exposurebylimits
set forthoffor
uncontrolled
or modifications
not
expressly
approved
the grantee
thisandevice
environment.
This
equipment
should
be
installed
and
operated
with
minimum
distance
could void the user's authority to operate the equipment.
20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2016:10:05 10:18:28+08:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2016:10:20 16:38:50+08:00
Metadata Date                   : 2016:10:20 16:38:50+08:00
Format                          : application/pdf
Creator                         : Liu Chien Tsun (劉建村 Besta)
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:b451135f-a51c-4ce2-8679-c39aee46b3de
Instance ID                     : uuid:85039d34-6161-40a4-b9cb-00c50df243be
Has XFA                         : No
Page Count                      : 13
Language                        : zh-TW
Author                          : Liu Chien Tsun (劉建村 Besta)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AJNIWB060

Navigation menu