Foshan Lanchiya Digital Technology KT455700 BLUETOOTH WIRELESS SPEAKER SYSTEM User Manual USERS MANUAL

Foshan Lanchiya Digital Technology Co., Ltd. BLUETOOTH WIRELESS SPEAKER SYSTEM USERS MANUAL

USERS MANUAL

Download: Foshan Lanchiya Digital Technology KT455700 BLUETOOTH WIRELESS SPEAKER SYSTEM User Manual USERS MANUAL
Mirror Download [FCC.gov]Foshan Lanchiya Digital Technology KT455700 BLUETOOTH WIRELESS SPEAKER SYSTEM User Manual USERS MANUAL
Document ID1905202
Application IDlXdFnIbE+tU4b4S6xv1USQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize163kB (2037504 bits)
Date Submitted2013-02-22 00:00:00
Date Available2013-02-22 00:00:00
Creation Date2013-02-21 11:45:42
Producing SoftwareCorel PDF Engine Version 15.2.0.686
Document Lastmod2013-02-21 14:56:25
Document Title美国马里奥低价蓝牙版说明书 KT4557-G01-0.cdr
Document CreatorCorelDRAW X5
Document Author: yuyu

IF THE UNIT IS OUTSIDE THE WARRANTY PE R I O D , p l e a s e i n clude a check for
$25.00 to cover the cost of repair, handling and return postage. All out of warranty
returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at
custserv@spectraintl.com for updated information on the unit requiring service. In
some cases the model you have may be discontinued, and SPECTRA reserves the
right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
BLUETOOTH WIRELESS SPEAKER SYSTEM
To register your product, visit the link below to enter your
information.
http://www.spectraintl.com/wform.htm
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
iPod and iPhone are registered trademarks of Apple Inc.,
registered in the U.S. and other countries
Android is a trademark of Google, Inc.
Licensed by:
Marino Andriani, LLC
Distributed by:
Spectra Merchandising International, Inc.
Chicago, IL 60634
www.spectraintl.com
USER MANUAL
KT4557
0113
PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
You must pay all shipping charges required to ship the product to SPECTRA for warranty
service. If the product is repaired or replaced under warranty, the return charges will be
W h e n u s e d i n t h e d i r e c t e d m a n n e r, t h i s u n i t h a s b e e n d e s i g n e d a n d
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
in s t r u c t i o n s h a n d y f o r f u t u r e r e f erence. Take special note of all warnings
listed in these instructions and on the unit.
1.The apparatus and AC/DC adapter shall not be exposed to dripping and splashing
and that no objects filled with liquids, such as vases, shall be placed on the apparatus
and AC/DC adapter.
2.The plug of the AC/DC adapter is used as the disconnect device. The power adapter
should always remain readily accessible and should not be obstructed.
3.To completely disconnect the apparatus, unplug the adapter from the power outlet.
4.Minimum distance of 4 inches (10cm) around the apparatus and AC/DC adapter
should be made available for sufficient ventilation.
5.The ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, table clothes, curtains, etc.
No open flame sources such as lighted candles should be placed on the apparatus.
6.The apparatus and AC/DC adapter should be used in moderate climates.
7.Do not attempt to dismantle, open or repair this product yourself. If a fault occurs,
seek advice from your local qualified service technician or contact the distributor
via the telephone number at the back of this instruction manual.
8.The rating plate of the apparatus is located on the rear of the unit.
at SPECTRA's expense. There are no other express warranties other than those stated
herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage
outside the descriptions and warnings covered within the user manual or
non-SPECTRA approved modifications.
c. Claims are made within the warranty period.
2. This warran t y d o e s n o t c o v e r d a m a g e o r e q uipment failure caused by electrical
wiring not in compliance with electrical codes or SPECTRA user manual specifications,
or failure to provide reasonable care and necessary maintenance as outlined in the
user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when
products are used in a nonresidential environment or installed outside the United
States.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and
pack the unit carefully and send it freight prepaid to SPECTRA at the address shown
below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above,
IMPORTANT NOTES
Avoid installing KT4559 in locations described below:
 Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.
 Places subject to constant vibrations.
 Dusty, humid or moist places.
please include a proof of purchase (dated cash register receipt) so that we may
establish your eligibility for warranty service and repair of the unit without cost. Also
include a note with a description explaining how the unit is defective. A customer service
representative may need to contact you regarding the status of your repair, so please
include your name, address, phone number and email address to expedite the process.
EN-10
COMPLIANCE WITH FCC REGULATIONS
3.It is normal for the KT4557 to get warm while charging your smart phone or
portable device.
4.Do not charge your smart phone or o t h e r p o r t a b l e d e v i c e s over 12 hours
continuously. Disconnect your smart phone or other portable device from
the USB cord once it is fully charged.
CARE AND MAINTENANCE
1.Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2.Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3.In case of malfunction, unplug the unit from the electrical power outlet immediately.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect the AC adapter of your unit from the AC
power source when cleaning.
The unit cabinet may be cleaned with a dust cloth and cared for as other furniture. Use
caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty, wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints, it may be cleaned with
a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive
cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A. ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from
defective materials or factory workmanship for a period of 90 days from the date of
original customer purchase and provided the product is utilized within the U.S.A. This
warranty is not assignable or transferable. Our obligation under this warranty is the
repair or replacement of the defective unit or any part thereof, except batteries, when
it is returned to the SPECTRA Service Department, accompanied by proof of the date
of original consumer purchase, such as a duplicate copy of a sales receipt.
EN-9
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may ca u s e h a r m f ul
interference to radio communications. However, there is no guarantee that interference
w i l l n o t o c c u r i n a pa r t i c u l a r i n s t a l l a t i o n . I f t h i s equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s) used for this transmitter must be
installed and operated to provide a separation distance of at least 20 cm from all
persons and must not be collocated or operating in conjunction with any other
antenna or transmitter.Installers must ensure that 20cm separation distance will
be maintained between the device (excluding its handset) and users.
PROTECT YOUR FURNITURE !
This model is equipped with non-skid rubber 'feet' to prevent the product from moving
when you operate the controls. These 'feet' are made from non-migrating rubber
material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives, or cleaning
sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the
furniture. To prevent any damage to your furniture we strongly recommend that you
purchase sm a l l s e l f - a d h e s i v e f e l t pads, available at hardware stores and home
Notes:
1.We recommend connecting the Headphone jack of your external audio device to
the Aux Input Jack on the KT4557. Then use the volume control on the connected
device to adjust the loudness level.
2.If you connect the Line-Out Jack of your external audio device to the KT4557 Aux
Input, the audio level will be very high and you can't adjust the volume level.
3.When using the AUX Input function, the Bluetooth pair (link) will be temporarily
disconnected until the Input Button is pressed again to select the Bluetooth enabled
device.
4.Turn the KT4557 power off when you have finished listening. Don't forget to switch
off the power of your external audio device as well.
improvement centers everywhere, and apply these pads to the bottom of the rubber
'feet' before you place the product on fine wooden furniture.
GETTING STARTED
ACCESSORIED INCLUDED
Carefully remove the unit and all accessories from the gift box. Please verify that you
have all the following accessories before you recycle the gift box
1 . KT4557 BLUETOOTH SPEAKER
2 . AC ADAPTER
3 . AUX IN CABLE
4 . USER MANUAL
CHARGING YOUR PORTABLE DEVICE WITH THE KT4557
This speaker features a USB port for charging your portable device (iPod, iPhone,
Android®, etc.) when used with the USB charging cord that came with your device.
1.Turn on the speaker by sliding the Power On/Off Switch to “ON”.
2.Plug one end of the USB cable (not included) into the USB Charging Port located
on the back of the KT4557. Plug the other end of the cord into the device you wish
to charge.
3.Observe the battery charge indicator on your device to make sure the charging
process starts normally.
4.Unplug the USB cable when your device is fully charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to charge to
make sure the charging current requested does not exceed 1A (1000mA). Overloading
the charging circuit may damage the KT4557 permanently and void the warranty.
Notes:
1.There will be no charging function when KT4557 is turned “OFF”.
2.Some smart phones and portable devices use proprietary USB connections and
circuitry and may not charge when plugged into the USB port. This includes older
iPod models including the iPod classic. Please refer to your device user manual
before you attempt to charge them.
EN-8
AUX INPUT OPERATION
LOCATION OF CONTROLS
The speaker provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players, an iPhone® or an iPod® (except iPod
shuffle 3rd generation) and listen to them through the speakers.
1.Turn on the speaker by sliding the Power On/Off Switch to “ON”. The Power LED should
light and remain on.
2 Plug one end of the included audio cable into the Aux Input Jack on back of speaker
and the other end into the Headphone Jack of your external audio device. Tap the
Input button on Hello Kitty's ear to select the AUX Input.
3 Turn on the external audio device.
4 Adjust the volume control of the external device to obtain the desired loudness.
EN-7
1.Power/Status Indicator
2.Speaker
3.Input Button
4.Pair Button
5.AUX Input Jack
6.DC Input Jack
7.Power On/Off Switch
8.USB Charging Port
PLAYING FROM A BLUETOOTH DEVICE
1.Make sure the Power On/Off Switch is in OFF position. Insert one end of the AC adapter
(Included) into the DC Input Jack on the back of the speaker.
3.If the speaker has never been paired/linked with a Bluetooth enabled device, you
need to follow the pairing instructions below:
a) Turn on the speaker by sliding the Power On/Off Switch to “ON”. The Power/
Status indicator should light and remain on.
b) Turn on the Bluetooth function of your device and enable the search or scan
function to find the speaker.
c) Select "KT4557" from the device list when it appears on your device screen.
Enter the pass code “0000” to pair (link) the speaker with your device.
d) If you are pairing (linking) your computer to the speaker using Bluetooth,
you may need to set the KT4557 as your computer's default sound device.
2.Connect the AC adapter to an AC 120V~ 60Hz power source. Use the PowerOn/Off
Switch to turn the speaker ON or OFF.
4.After turning on the speaker, the unit will search for the last paired device.
5.After pairing the speaker with your Bluetooth device successfully, you can play music
from your Bluetooth device wirelessly from the speaker.
6.Adjust the volume on your Bluetooth enabled device to obtain the desired loudness.
NOTE: All control functions should be achieved from your Bluetooth enabled device.
7.If the unit needs to pair with another Bluetooth device, repeat step 3 above but press
Pair Button instead of turning on the power. The Power/Status indicator will flash
once.
8.To turn the speaker off, slide the Power On/Off Switch on the back of the speaker to
the OFF position. The Power/Status indicator will go off.
EN-6

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-702
Create Date                     : 2013:02:21 11:45:42+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2013:02:21 14:56:25+08:00
Metadata Date                   : 2013:02:21 14:56:25+08:00
Format                          : application/pdf
Creator                         : yuyu
Title                           : 美国马里奥低价蓝牙版说明书 KT4557-G01-0.cdr
Producer                        : Corel PDF Engine Version 15.2.0.686
Document ID                     : uuid:b8c76eb8-f3a8-492b-868f-7b860a93ce4d
Instance ID                     : uuid:7ea3f4e2-431e-44c2-91e3-7ee33d86b67f
Page Count                      : 6
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : yuyu
EXIF Metadata provided by EXIF.tools
FCC ID Filing: P4LKT455700

Navigation menu