Foxpro 622 Frequency hopping transceiver Module User Manual RF Exposure Safety Notice

Foxpro Inc Frequency hopping transceiver Module RF Exposure Safety Notice

UserManual.wiki >

622 User Manual >

RF Exposure Safety Notice

Contents

1. User Manual
2. RF Exposure Safety Notice

RF Exposure Safety Notice

FOXPRO INC. 14 Fox Hollow Drive Lewistown, PA 17044 (717)248-2507 FAX(717)247-3594 www.gofoxpro.com RF Exposure Safety Notice placed in user manuals for all products containing Modular Transmitter 505MOD20DB: RF Exposure Safety Notice This remote control transmitter is not intended to be operated closer than 20cm (about 8 inches) to your body. The transmitter can produce a radiated RF field similar to that of a standard cell telephone, although the duty cycle of this RF field is much lower than that of a cell telephone. Using the transmitter closer than 8 inches to your body can increase your exposure to RF energy levels thought by some to be harmful. Additionally, operation in close proximity to your body can detune the antenna causing a decrease in operating performance. The following statement is required by the FCC to be included in this RF exposure notice even though it does not pertain to you since you cannot change or alter the built-in antenna: “The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all parsons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.”