Foxpro 622 Frequency hopping transceiver Module User Manual RF Exposure Safety Notice

Foxpro Inc Frequency hopping transceiver Module RF Exposure Safety Notice

Contents

RF Exposure Safety Notice

FOXPRO INC.
14
Fox Hollow Drive Lewistown, PA 17044
(717)248-2507 FAX(717)247-3594 www.gofoxpro.com
RF Exposure Safety Notice placed in user manuals
for all products containing Modular Transmitter
505MOD20DB:
RF Exposure Safety Notice
This remote control transmitter is not intended to
be operated closer than 20cm (about 8 inches) to
your body. The transmitter can produce a radiated
RF field similar to that of a standard cell
telephone, although the duty cycle of this RF field
is much lower than that of a cell telephone. Using
the transmitter closer than 8 inches to your body
can increase your exposure to RF energy levels
thought by some to be harmful. Additionally,
operation in close proximity to your body can
detune the antenna causing a decrease in operating
performance.
The following statement is required by the FCC to
be included in this RF exposure notice even though
it does not pertain to you since you cannot change
or alter the built-in antenna:
“The antenna(s) used for this transmitter must be
installed to provide a separation distance of at
least 20cm from all parsons and must not be co-
located or operating in conjunction with any other
antenna or transmitter. End-users and installers
must be provided with antenna installation
instructions and transmitter operating conditions
for satisfying RF exposure compliance.”

Navigation menu