FreeWave Technologies PRW1001EC 802.11an PCIe Module User Manual Users manual
FreeWave Technologies Inc. 802.11an PCIe Module Users manual
Contents
- 1. user manual
- 2. Users manual
- 3. User Manual
Users manual
WavePoint 10e Software 1.0.38 User Manual Part Number: LUM0063AA Revision: A Last Updated: 03/21/2014 Warranty FreeWave Technologies, Inc. warrants your FreeWave® Wireless Data Transceiver against defects in materials and manufacturing for a period of one year from the date of shipment, depending on model number. In the event of a Product failure due to materials or workmanship, FreeWave will, at its discretion, repair or replace the Product. For evaluation of Warranty coverage, return the Product to FreeWave upon receiving a Return Material Authorization (RMA). FreeWave’s policy for handling WavePoint products returned due to a fault, after complaint is validated by FreeWave’s Customer Support, is to replace the product with a new or refurbished unit upon receipt of reported faulty product. This means failure analysis on said product will not be performed and reported to customers. All failed units will be bagged and tagged so they can be revisited in the event that FreeWave experiences a high degree of failures or a trend. At which time, FreeWave will perform a root-cause analysis and take the appropriate corrective actions. Any visual or external damage noted on returned units will be communicated back to customers and may void the warranty, at which time, a Purchase Order (PO) will be requested from the customer for product replacement In no event will FreeWave Technologies, Inc., its suppliers, or its licensors be liable for any damages arising from the use of or inability to use this Product. This includes business interruption, loss of business information, or other loss which may arise from the use of this Product. OEM customer’s warranty periods can vary. Warranty Policy will not apply in the following circumstances: 1. If Product repair, adjustments, or parts replacements are required due to accident, neglect, or undue physical, electrical, or electromagnetic stress. 2. If Product is used outside of FreeWave specifications as stated in the Product's data sheet. 3. If Product has been modified, repaired, or altered by Customer unless FreeWave specifically authorized such alterations in each instance in writing. This includes the addition of conformal coating. Special Rate Replacement Option A special rate replacement option is offered to non-warranty returns or upgrades. The option to purchase the replacement unit at this special rate is only valid for that RMA. The special replacement rate option expires if not exercised within 30 days of final disposition of RMA. Restricted Rights Any product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. This manual is for use by purchasers and other authorized users of FreeWave products. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, or for any purpose without the express written permission of FreeWave Technologies, Inc. FreeWave reserves the right to make changes to this manual without notice. FreeWave assumes no responsibility or liability for the use of this manual or the infringement of any copyright or other proprietary right. FreeWave Technologies, Inc. Boulder, CO 303.381.9200 Toll Free: 1.866.923.6168 Printed in the United States of America. Fax: 303.786.9948 Copyright © 2014 by FreeWave Technologies, Inc. All rights reserved. www.freewave.com Page 2 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e FreeWave Technologies, Inc. products may be subject to control by the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR). Export, re-export, or transfer of these products without required authorization from the U.S. Department of Commerce, Bureau of Industry and Security, or the U.S. Department of State, Directorate of Defense Trade Controls, as applicable, is prohibited. Any party exporting, re-exporting, or transferring FreeWave products is responsible for obtaining all necessary U.S. government authorizations required to ensure compliance with these and other applicable U.S. laws. Consult with your legal counsel for further guidance. FCC Notifications This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. The content of this guide covers FreeWave Technologies, Inc. models sold under FCC ID: KNYPRW1001ER, KNYASM1101CR, KNYASM1101CR, KNYASM1101CR, KNYPRW1001EC, KNYPRW1001EC. All models sold under the FCC ID(s) listed above must be installed professionally and are only approved for use when installed in devices produced by FreeWave Technologies or third party OEMs with the express written approval of FreeWave Technologies, Inc. Changes or modifications should not be made to the device. IC Notifications This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme aux normes permis-exemptes du Canada RSS d'industrie. L'opération est sujette aux deux conditions suivantes : (1) ce dispositif peut ne pas causer l'interférence, et (2) ce dispositif doit accepter n'importe quelle interférence, y compris l'interférence qui peut causer le fonctionnement peu désiré du dispositif. LUM0063AA Rev A Page 3 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Page 4 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Table of Contents Preface 17 Chapter 1: Introduction 19 Key Features and Supported Protocols 20 Wireless Operating Modes 20 Available Network Services 20 Device Management 20 Network Security 21 Requirements 21 Installation Settings 21 Equipment and Configuration 22 Accessories 22 Product Variations 23 WavePoint 10e Labels 23 Sample: Configuration Label 23 Sample: Port Assignment Label 23 WavePoint™ Components 24 Data Connectors 24 RF Connectors 24 Certified Antennas 25 Antenna Installation Warning 25 900MHz Antennas 25 2.4GHz Antennas 26 5GHz Antennas 26 Antenna Installation 27 LUM0063AA Rev A Page 5 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Placement Considerations 27 Transmit Power Settings 28 RF Loss 28 WavePoint™ EIRP Limits 29 RF Considerations for 2.4 GHz ISM Band 29 Peak Power Output 29 Point-to-Point Link 30 Guidelines Point-to-Multi-Point Link 30 31 RF Considerations for 900MHz ISM Band 31 WavePoint™ GUI to Actual RF Power 31 Connect Power 32 Network Deployment Scenarios 32 Wired Access 33 Wireless Access 33 Multiple Repeaters 33 Connecting and Logging In 33 Configuration Pages 35 Searching for Menus Chapter 2: Configuring Basic WavePoint™ Network Features Setting the Device IP Address and Subnet IPv4 Networks - Set the IP Address and Subnet 36 37 38 38 Reserved Subnets 38 Procedure 38 Enabling and Configuring DHCP Page 6 of 165 39 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e IPv4 Addressing - Enable and Configure DHCP 39 Reserving IP Addresses 41 Reserve IP Addresses in an IPv4 Network 41 Delete a Specific LAN Reserved IP Address 41 Delete all Reserved IP Addresses 42 Using Multiple WANs or a Single WAN 42 Indicate the Number of WANs in Use 42 Configuring the WAN in an IPv4 Network 43 Defining WAN Connections Using Static IP Addresses Procedure Defining WAN Connections Using DHCP Procedure Defining WAN Connections Using PPPoE Procedure Defining WAN Connections Using PPTP 43 43 44 44 45 45 46 Procedure 46 Setting the Device Mode 47 Procedure Chapter 3: Additional Data Networking Features Defining Physical WAN Port Settings Procedure Setting Up Auto Fail-Over in Multi-WAN Environments Procedure Balancing Data Flow in Multi-WAN Environments Procedure LUM0063AA Rev A 47 49 49 49 50 50 51 51 Page 7 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Restricting the Traffic Type for Each WAN Port 52 Configure a Traffic Restriction (Protocol Binding) for a WAN Port 53 Enable or Disable a Protocol Binding Configuration 54 Delete a Protocol Binding Configuration 54 Binding an IP Address to a MAC Address Procedure Data Routing 54 54 55 Defining Static Routing Rules 55 Define a Static IPv4 Route 56 Delete an Existing Static Route 57 Defining Routing Internet Protocol Rules 57 Define RIP in IPv4 Networks 58 Virtual Local Area Networks (VLANs) 58 Enabling VLANs Procedure Defining VLANs in the Network Procedure Delete an Available VLAN Mapping VLANs to LAN Subnets Procedure Associating Port Traffic to a VLAN Procedure WaveMesh 59 59 59 59 60 60 61 62 62 64 WaveMesh Methods 64 Example: WaveMesh Routing Diagram 65 Page 8 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e WaveMesh using Auto Selection Method 66 WaveMesh using Branch Selection Method 69 WaveMesh using a List Selection Method 72 Chapter 4: Configuring Wireless Access Example: Point-to-Point Configuration Configuring a Point-to-Point Network Point-to-Multipoint Configuration Examples Example 1: Point-to-Multipoint Setup Procedure Example 2: Point-to-Multipoint Procedure Configuring Wireless Communication Procedure Bench Test Verification of WavePoint™ Configuration 79 79 80 80 80 80 81 81 82 83 85 Required Materials 85 RF Cabled Test Procedure 86 Open Antenna Test Procedure 86 Defining Advanced Radio Settings 87 Procedure 88 Verify the Wireless Connection 91 Enabling Virtual Access Points 91 Procedure 92 Change a Virtual Access Point's Settings 92 Wireless Security Authorizing Wireless Access LUM0063AA Rev A 93 93 Page 9 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Procedure Restricting Access by MAC Address 93 95 Set the ACL Policy Type 95 Add or Edit MAC Addresses in the ACL List 96 Delete a Device from the List 96 Enabling Rogue Access Point Detection Procedure 96 96 Review Devices that Attempted to Access the Network 97 Defining EAP Authentication and External RADIUS Servers 97 Configure the EAP Authentication 97 Define an External RADIUS Server 98 Scheduling When Wireless Connections are Available Define and Enable a Schedule for a Wireless Connection Disable a Schedule 99 99 100 Chapter 5: Security 101 Firewall Overview 101 Firewall Basic Policies Default Outbound Policy Set the Outbound Traffic Policy Firewall Rules 101 101 102 102 Creating Firewall Rules for IPv4 102 Delete an IPv4 Firewall Rule 105 Disable an IPv4 Firewall Rule 105 Custom Services Configure Custom Service Settings Page 10 of 165 105 106 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Delete an Existing Custom Service 107 VPN Passthrough 107 Procedure 107 Firewall Schedules 107 Configuring Firewall Schedules 108 Delete a Firewall Schedule 108 Application Rules 109 Configuring Application Rules 109 Delete an Application Rule 110 Application Rules Status VPN Tunnels and IPsec 111 111 Configuring a VPN Tunnel with IPsec 111 Configuring a Basic VPN Tunnel 111 IPsec Policies Configuring an IPsec VPN Policy 112 113 Configuring an Auto Policy that uses IKE to Perform Negotiations between Two VPN Clients 116 Configure Phase 2 Auto Policy Parameters 119 Configure Phase 2 Manual Policy Parameters 120 Delete an IPSec VPN Policy Edit the Default DHCP Range Chapter 6: Management and Administration Set Up Remote Access to the WAN Port Procedure User Access Management LUM0063AA Rev A 121 121 123 124 124 124 Page 11 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Users and Groups 125 Users 125 Groups 125 Factory Defined Users 125 admin 125 guest 126 Adding and Editing User Groups Default User Groups Procedure Define and Assign User Group Login Policies Procedure Define User Group Browser Policies Procedure Define User Group IP Policies Procedure Deleting User Groups Policies 126 126 126 127 128 128 128 129 129 130 Delete a Single User Group Policy 130 Delete all User Policies in a List 130 Deleting User Groups 130 Delete a User Group 130 Delete all User Groups 131 Adding and Editing Users 131 Procedure 131 Deleting Users 132 Procedure 132 Page 12 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Software Maintenance Upgrade the WavePoint 10e Software Procedure Back Up Configuration Settings Procedure Restore Configuration Settings Procedure Restoring Factory Default Settings Procedure Rebooting Procedure System Logging Set Up System Event Logging Procedure Logging Packet Traffic Log Packet Traffic in an IPv4 Network Sending Log Messages to Email Addresses Procedure Sending Logs to Syslog Servers Procedure 132 132 133 133 134 134 134 135 135 135 135 136 136 137 137 137 138 139 140 140 Simple Network Management Protocol (SNMP) 140 Authentication Certificates 141 Adding Trusted Certificates (CA Certificates) Procedure Generating Self Certificate Requests LUM0063AA Rev A 141 141 142 Page 13 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Procedure Adding Active Self Certificates Procedure Deleting Certificates 142 143 144 144 Delete a Single Certificate 144 Delete all Certificates 144 Setting the Date and Time 145 Use an NTP Server to Set the Date and Time 145 Manually Set the Date and Time 146 System Statistics Procedure Chapter 7: Diagnostics and Troubleshooting 146 147 149 General Troubleshooting 149 Internet Connection and Browser Display 149 Cannot Access the Configuration Pages from a Computer on the LAN 149 Configuration Changes are not Saving 150 WavePoint 10e cannot Obtain an IP address from the ISP 150 WavePoint 10e can Obtain an IP address but the PC is Unable to Load Internet Pages 150 Date and Time 151 The Date Shown in the Log Files is January 1, 1970 151 The Time is off by One Hour 151 Chapter 8: Installation Instructions 153 Attach the DIN Rail Bracket 154 Attach the Mounting Flanges 154 Appendix A: Factory Default Settings Page 14 of 165 155 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Appendix B: WavePoint™ Configurations 157 WP10e-R100-100-100 157 WP10e-S100-100-100 157 WP10e-S200-101-100 157 WP10e-T100-100-100 158 WP10e-T200-101-100 158 Glossary 159 Index 161 LUM0063AA Rev A Page 15 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Page 16 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Preface This document provides information to configure and setup the WavePoint 10e device and includes: An introduction to the WavePoint 10e device and its key features. Physical components of the device including its ports and LEDs. Configuring a basic WavePoint 10e network. Setting up wireless access. Using a WavePoint 10e for local communication or as a Wi-Fi hotspot. Performing general administrative tasks (e.g., setting up users, defining the system time). Performing basic diagnostics, including troubleshooting tips. The WavePoint 10e has a variety of configurations for installation flexibility. Note: The information provided in this documentation assumes the user has a general understanding of networking devices (e.g., routers, bridges, etc.) and Ethernet and RF communication. Contacting FreeWave Technical Support For up-to-date troubleshooting information, check the Support page at www.freewave.com. LUM0063AA Rev A Page 17 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Preface FreeWave provides technical support Monday through Friday, 7:30 AM to 5:30 PM Mountain Time (GMT -7). Call toll-free at 1.866.923.6168. In Colorado, call 303.381.9200. Contact us through e-mail at moreinfo@freewave.com. Printing this Document This document is set to print double-sided with a front cover and a back cover. Viewing this document online with a PDF viewer, may show pages intentionally left blank to accommodate the double-sided printing. Documentation Feedback Send comments or questions about this document's content to techpubs@freewave.com. In the email, include the title of the document or the document's part number and revision letter (found in the footer). Page 18 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction WavePoint 10e is a powerful, end-to-end wireless networking and communications platform. It comprises a product family of networking devices to solve network infrastructure and communications needs. The flexible WavePoint 10e platform delivers high-speed broadband data communications across an entire network and to any environment. WavePoint 10e provides: Flexible installations on communication towers, rooftops, and street light poles with diverse power and backhaul and antenna options. Multiple applications such as voice, Internet access, video surveillance, sensory data, and SCADA. This chapter introduces WavePoint 10e and provides details about: LUM0063AA Rev A Page 19 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction Key Features and Supported Protocols on page 20 Requirements on page 21 Accessories on page 22 Product Variations on page 23 Certified Antennas on page 25 Key Features and Supported Protocols The WavePoint 10e provides an industrial networking solution for a license-exempt market and includes these features and standard networking technology and protocols. Wireless Operating Modes Configurations for the WavePoint 10e include: Wireless mode: Access Point / Repeater / Client that can operate concurrently in the 900 MHz, 2.4 GHz, and 5 GHz bands. Router mode: Network Address Translation (NAT) / Router / Bridge For information about how WavePoint 10e fits into a network deployment, see Network Deployment Scenarios on page 32. Available Network Services The networking services and protocols WavePoint 10e provides are: Configurable MTU and PMTU discovery when set up as an access point. PPPoE, PPTP client RIPv1 and RIPv2. DHCP MAC filtering and MAC binding. Static and dynamic IP addressing. DHCP server or client. Static and dynamic routing. Dynamic DNS clients. TCP, UDP, and ICMP protocols. Multi-instance DHCP server on WLAN. VLAN setup. Multiple LAN subnets. VPN Tunneling and Transport. Device Management Each WavePoint 10e is configured and monitored through a web browser interface. The management options are: Policy definition for when the WavePoint 10e is on and listening for network traffic. Remote access and provisioning. Page 20 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Logging services to monitor and track system performance using email logs, alerts, and external SYSLOG servers. Network Time Protocol (NTP). Unlimited users definition (subject to the network capacity). Over the air firmware updates. Network Security The security features WavePoint 10e provides to ensure the data passed through the network is secure are: Device certificates Rogue AP detection Hidden, guest, and maintenance SSIDs SSL and SSH secured management IPsec TCP Establish MAC address filtering VLAN-based per-SSID isolation RADIUS for authentication. WPA, WPA2 Requirements Important: Use the www.freewave.com/home/WavePointLogin site to download the latest WavePoint 10e software. Updating the software to the latest version provides the best experience with WavePoint 10e. Installation Settings Attention Network Administrator! Complete the information in this table. SSID: _____________________________ (8-64 ASCII characters. The SSID field is case sensitive.) Security Mode: Security Key: (This field is case sensitive.) IP Address: Subnet Mask: DHCP Setup Mode: Max Range:(Double the distance of the longest link in Km) LUM0063AA Rev A Page 21 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction Equipment and Configuration This equipment and configurations are needed prior to the initial WavePoint 10e setup and installation: A computer or laptop with: Windows 7 operating system. A web browser to access the web pages for configuration. Supported browsers include: Microsoft Internet Explorer 9 and 10, Firefox 27, Google Chrome, Safari, and Opera. Note: Configuration pages are NOT optimized for browsers on mobile devices (e.g., tablets, smart phones, etc.) A device with wireless capability to verify the wireless connection. A NEMA-4 rated enclosure (for outdoor installations only). A screwdriver for attaching mounting brackets and power connector. FreeWave Recommends: A Path Study, as applicable, for the network site. Accessories The items shipped in the box are: The WavePoint 10e device. The WavePoint 10e Quick Start Guide. A CAT 5e Ethernet cable. An AC power adapter. These options are available and, if ordered, are included in the shipping box: An RJ-45-to-DB9 serial cable. A mounting kit. Contact a FreeWave reseller or FreeWave Technical Support if the package is missing parts or any parts were damaged during shipping. Note: Antennas are shipped separately. Page 22 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Product Variations WavePoint™ has a variety of configurations offering multiple feature sets. This manual describes these features and indicates the features that are only available on certain models. To identify the variation and model number of the WavePoint 10e, see the product label on the back panel. Note: For a list of features included in each Model , see the WavePoint™ Configurations on page 157. WavePoint 10e Labels The labels on the back of the WavePoint 10e contain information about the device's port assignments and Configuration (CFG). Sample: Configuration Label 1. MDL - WP10e 2. CFG - S100-100-100 3. P/N - PRW2000ES 4. SER - 123-456-7890 Note: The Configuration label identifies the installed radios. This sample label shows only one radio (Radio 3) installed in this WavePoint 10e device. Sample: Port Assignment Label 1. Radio 1 - Not Installed 2. Radio 2 - Not Installed 3. Radio 3 - 2.4 GHz a. Port 1 - Front 1 b. Port 2 - Front 2 c. Port 3 - Front 3 4. Radio 4 - Not Installed Note: The Port Assignment label designates which RF ports (TNC connectors on the WavePoint™ device) are used by which radio. LUM0063AA Rev A Page 23 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction WavePoint™ Components Data Connectors Quantity Connector RJ-45 connector for 4 Ethernet ports RJ-45 connector for: 2 - RS-232 1 - RS-485 Micro USB connector Power connector used for DC power RF Connectors Module Maximum Connectors 900MHz RF modules 2 TNC connectors for spatial diversity* 2.4GHz RF modules 3 TNC connectors for 3x3 MIMO operation* 5.8GHz RF modules 3 TNC connectors for 3x3 MIMO operation* Cellular module 1 RF connector – TNC GPS module 1 RF connector – TNC *One active RF port is a typical configuration. Note: Refer to the label on the WavePoint 10e to determine the exact RF Connector configuration. A description of the labels are in WavePoint 10e Labels on page 23. Page 24 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Certified Antennas A WavePoint™ can have multiple radio modules installed, each potentially operating at different frequencies. The model number reflects the number and frequency of the radios installed inside the WavePoint™ device and determines the type of antennas that can be used. Important: The use of an antenna with a higher gain or a different type of antenna other than those approved requires new FCC approval and should not be used. Antenna Installation Warning Important: This section provides the required FCC warning information for working in proximity of the WavePoint™ antennas. 1. All antenna installation and servicing must be performed by qualified technical personnel only. a. When servicing the antenna, or working at distances closer than those listed below, verify the transmitter has been disabled. b. Output is measured at the antenna terminal of the transmitter. c. The antennas used for the WavePoint™ must be fixed-mounted on outdoor permanent structures to provide the minimum separation distances described in this filing for satisfying RF exposure compliance requirements. d. When applicable, RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureaus, including antenna co-location requirements of §1.1307(b)(3). 2. Typically, the antenna connected to the transmitter is a directional (high gain) antenna, fixed-mounted on the side or top of a building, or on a tower. a. Depending upon the application and the gain of the antenna, the total composite power could exceed 20 watts EIRP. b. The antenna location must only be accessible by qualified technical personnel. c. Under normal operating conditions, no other person can touch the antenna or approach within 3.05 meters of the antenna. Note: These antennas have been approved for use with WavePoint 10e and the designated Tx Streams. 900MHz Antennas Note: Separation minimum RF safety distances are required for FCC RF exposure compliance. LUM0063AA Rev A Page 25 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction 900 MHz Antennas Type Antenna Model Gain No of Channel Tx Streams Size Minimum RF Safety Distance Omni Wavelink - PRO902-11 11dBi 20 MHz 94cm Yagi 20 MHz 260cm Wavelink - PRO890-16 16dBi 2.4GHz Antennas Note: Separation minimum RF safety distances are required for FCC RF exposure compliance. 2.4GHz Antennas Type Antenna Model Gain Dipole 98618MNXX001 5dBi No of Channel Tx Streams Size Minimum RF Safety Distance 20 MHz 20cm 40 MHz 20 MHz Omni ZDAQJ2400-12 12dBi 20cm 40 MHz 20 MHz Yagi YA240016 16dBi 20cm 40 MHz RadioWaves 60 degree sector 20 MHz 17.5dBi SEC-25V-60-17HP 20 MHz Superpass 20.5dBi Directional Panel SPAPG20 20 MHz 27dBi SPD4 - 2.4NS 25cm 40 MHz RadioWaves Dish 20cm 40 MHz 40cm 40 MHz 5GHz Antennas Note: Separation minimum RF safety distances are required for FCC RF exposure compliance. Page 26 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e 5GHz Antennas Type Antenna Model Gain Dipole 98618UNXX000 7dBi No of Channel Tx Streams Size Minimum RF Safety Distance 20 MHz 20cm 40 MHz 20 MHz Omni ZDAQJ5800-12 12dBi 20cm 40 MHz 20 MHz Yagi Y5815 15dBi 26cm 40 MHz RadioWaves Directional Panel 20 MHz 28.2dBi FP2-5-28 20 MHz RadioWaves 34.9dBi Dish SPD4-5.2S 71cm 40 MHz 154cm 40 MHz Antenna Installation Antennas must be professionally installed on a fixed, mounted, and permanent structure to satisfy RF exposure requirements. Warning! Any antenna placed outdoors must be properly grounded. Use extreme caution when installing antennas and follow ALL manufacturer instructions included with the antenna. Mise en garde ! Toute antenne placée à l'extérieur doit être correctement mise à la terre. Soyez très prudent lors de l'installation d'antennes et suivre toutes les instructions du fabricant fournies avec l'antenne. Per FCC regulations, any antenna used with transceivers must be an approved antenna that has comparable performance parameters. Placement Considerations Placement of the WavePoint 10e is likely to have a significant impact on its performance. The key to the overall robustness of the RF link is the height and alignment of the antenna. Other antennas in close proximity are a potential source of interference. See Diagnostics and Troubleshooting on page 149 for more information. LUM0063AA Rev A Page 27 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction FreeWave Recommends: In general, FreeWave units with a higher antenna placement have a better communications link. Use grid and dish antennas with low attenuation cable in lengths ranging from 3 to 100 feet. To help optimize an antenna location, have FreeWave complete a free Path Site study. Contact a FreeWave sales representative for a Path Study form. Email the completed form to pathstudy@freewave.com. Transmit Power Settings The Transmit Power parameter is the output power of the transceiver. Important: The information in this section describes the FCC maximum Equivalent Isotropically Radiated Power (EIRP) regulations. The transceiver output power level must be set to satisfy the maximum requirements in the country the WavePoint 10e is installed in. The installer is responsible for ensuring that an installation is within EIRP emission limits. When setting up the network, consider the power gain that an antenna may add and the power loss through cabling. Adjust the Transmit Power on the transceiver so it does NOT exceed the maximum EIRP for the regulating body where WavePoint 10e is installed. Use the tables to determine the correct Transmit Power parameter setting for each transceiver in the network. When calculating the power gain, use Equation 1 to determine the total output power at the antenna. Transceiver Output – Losses + Antenna Gain = Output Antenna Power Equation 1 Note: Loss calculations should include cable, connectors, surge protectors, etc. RF Loss Cable losses for high frequency systems are one of the main losses to consider in Equation 1. This table shows the RF loss at various cable lengths. Example: Using the information in the table, a cable as short as 25 feet can have an attenuation of almost 1dB. Page 28 of 165 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Attenuation Cable Type (db/100 ft) Total Run Run Length (ft) Attenuation (dB) LMR400 3.93 25 1.0 LMR500 3.154 25 0.8 LMR600 2.518 25 0.6 LMR900 1.709 25 0.4 WavePoint™ EIRP Limits This table provides a summary of the FCC limits for the different frequencies available in WavePoint™. Note: See the www.fcc.gov site for the most up-to-date information. EIRP Limits Frequency Band PTP PTP PTMP PTMP Max EIRP (dBm) Max EIRP (watts) Max EIRP (dBm) Max EIRP (watts) 900 ISM (902-928 MHz) 36 36 2.4 ISM (2.4 - 2.483.5 GHz) 50 158 36 UNII - 1 (5.15 - 5.25 GHz) 22 0.16 22 0.16 UNII - 2a (5.25 - 5.35 GHz) 29 0.8 29 0.8 UNII - 2c (5.470 - 5.725 GHz) 29 0.8 29 0.8 UNII - 3 (5.725 - 5.850 GHz) 53 200 35 3.2 RF Considerations for 2.4 GHz ISM Band The FCC regulations for 2.4 GHz ISM Band are different for Point-to-Point (PTP) and Point-toMulti-Point (PtMP) links. Peak Power Output The maximum peak output power of the intentional radiator cannot exceed 1.000 Watts. LUM0063AA Rev A Page 29 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. Chapter 1: Introduction Digital Transmission Systems (MHz) Output Limit (Watts) 2400-2483.5 1.000 Important: Point-to-Point applications operating in the 2400-2483.5 MHz band may employ transmitting antennas with directional gain greater than 6 dBi provided the maximum peak output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. Example: 2.4 GHz with a 24 inch dish has a maximum output of 24 dBm. 2.4 GHz with a 27 inch dish has a maximum output of 23 dBm. Point-to-Point Link Note: The FCC permits a maximum of 36dBm EIRP when using a transmitter set to 30dBm. However, for each 1dBm reduction in the transmitter power, the FCC permits an increase in antenna gain of 3dBi. Extrapolating this rule through different maximum power settings on the WavePoint™ provides these guidelines. Guidelines Maximum Power Maximum Antenna from Transmitter Gain (dBi) EIRP (dBm) Page 30 of 165 30dBm 36 29dBm 38 28dBm 12 40 27dBm 15 42 26dBm 18 44 25dBm 21 46 24dBm 24 48 23dBm 27 50 22dBm 30 52 LUM0063AA Rev A This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc. WavePoint 10e Note: FreeWave has certified a dish antenna with a maximum gain of 27dBi. This sets the maximum EIRP of a FreeWave system to 50 EIRP. Dishes below 27dBi can be used with a corresponding reduction in total EIRP. Point-to-Multi-Point Link For Point-to-Multi-Point links, the FCC permits 1 Watt output power at the transceiver and 36dBm (4 Watts) at the antenna. RF Considerations for 900MHz ISM Band The 900MHz links requires these special considerations: A Path Study is needed to confirm the right RF characteristics of the link. The noise floor should be sampled at each site using similar antennas to the ones expected to be deployed. WavePoint™ GUI to Actual RF Power This table identifies the WavePoint™ GUI settings on the Advanced Radio window and their corresponding actual power out of the radio. Note: Click Wireless LAN > Radios > Advanced to open the window. GUI Setting Actual Tx Power Out GUI Setting Actual Tx Power Out (dBm) of Radio (dBm) (dBm) of Radio (dBm) 11 23 18 30 10 22 17 29 21 16 28 20 15 27 19 14 26 18 13 25 17 12 24 LUM0063AA Rev A Page 31 of 165 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : mspataro Create Date : 2014:04:24 10:24:23-06:00 Modify Date : 2014:04:24 10:24:23-06:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Microsoft Word - DRAFT-WavePoint User Manual (LUM0063AA) v0 6.docx Creator : mspataro Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:eec31a1c-14b5-4a5b-a138-1fcd151176b8 Instance ID : uuid:ff0a42e3-dd64-4e80-851f-d2f92990864d Page Count : 31EXIF Metadata provided by EXIF.tools