FreeWave Technologies PRW5000AA Wireless 802.11ac/b/g/n access point User Manual My

FreeWave Technologies Inc. Wireless 802.11ac/b/g/n access point My

Contents

User Manual User Notifications

Part Number: LUM0073AARevision: Sep-2015WP201 Access PointUser Manual
Safety InformationThe products described in this manual can fail in a variety of modes due to misuse, age, or malfunction. Systemswith these products must be designed to prevent personal injury and property damage during product operationand in the event of product failure.Warning! Do not remove or insert the Ethernet or diagnostics cable while circuit is live unlessthe area is known to be free of ignition concentrations of flammable gasses or vapors.WarrantyFreeWave Technologies, Inc. warrants your FreeWave® Wireless Data Radio against defects in materials andmanufacturing for a period of one year from the date of shipment, depending on model number. In the event of aProduct failure due to materials or workmanship, FreeWave will, at its discretion, repair or replace the Product.For evaluation of Warranty coverage, return the Product to FreeWave upon receiving a Return MaterialAuthorization (RMA).In no event will FreeWave Technologies, Inc., its suppliers, or its licensors be liable for any damages arising fromthe use of or inability to use this Product. This includes business interruption, loss of business information, orother loss which may arise from the use of this Product. OEM customer’s warranty periods can vary.Warranty Policy will not apply in the following circumstances:1. If Product repair, adjustments, or parts replacements are required due to accident, neglect, or unduephysical, electrical, or electromagnetic stress.2. If Product is used outside of FreeWave specifications as stated in the Product's data sheet.3. If Product has been modified, repaired, or altered by Customer unless FreeWave specifically authorizedsuch alterations in each instance in writing. This includes the addition of conformal coating.Special Rate Replacement OptionA special rate replacement option is offered to non-warranty returns or upgrades. The option to purchase thereplacement unit at this special rate is only valid for that RMA. The special replacement rate option expires if notexercised within 30 days of final disposition of RMA.FreeWave Technologies, Inc.5395 Pearl Parkway, Suite 100Boulder, CO 80301303.381.9200Toll Free: 1.866.923.6168Fax: 303.786.9948Copyright © 2015 by FreeWave Technologies, Inc.All rights reserved. www.freewave.comPage 2 of 285 LUM0073AA Rev Sep-2015This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned byFreeWave®. This document cannot be reproduced in whole or in part by any means without written permission fromFreeWave Technologies, Inc.
WP201 Access Point: User ManualWP201® Return Material Authorization (RMA) Policy and ProceduresThis policy describes the responsibilities and procedures of the Customer and FreeWave when a WP201®device return is required.When a request for a WP201® device replacement has been validated by FreeWave’s Customer Support,FreeWave’s policy for processing the device returned due to a fault is to replace the device with a new orrefurbished device upon receipt of the reported faulty product.Important!: This policy means that a failure analysis on the returned device will NOT be performed andreported to customers.Note: This RMA policy is subject to change without notice.Detailed information about the FreeWave RMA policy can be found at www.freewave.com.FreeWave ResponsibilitiesA failed WP201® product is inventoried at FreeWave. If FreeWave experiences a high degree of failures or atrend, FreeWave will perform a root-cause analysis and take appropriate corrective action(s).In-Warranty Replacement Procedure1. Customer contacts FreeWave Customer Support to report the non-functioning WP201® device.2. FreeWave Customer Support:a. Validates that a device replacement is the appropriate action.b. Issues a FreeWave RMA number.3. The Customer pays the shipping costs to return the WP201® device to FreeWave.4. FreeWave sends a new or refurbished WP201® device to the Customer.Important!: Any visual or external damage noted on returned units may void the warranty.This will be communicated back to the customer and a Purchase Order (PO) will be requested from thecustomer for product replacement.Out-of-Warranty WP201 ReplacementThis procedure describes the Customer and FreeWave Customer Support responsibilities for replacing an out-of-warranty WP201 device.Procedure1. Customer contacts FreeWave Customer Support to report the non-functioning WP201® device.2. FreeWave Customer Support:a. Validates that the device is out of warranty and if replacement is the appropriate action.b. Requests a PO number from the Customer (to bill the replacement WP201® device and shipping).c. Issues a FreeWave RMA number and advises the Customer to return the device to FreeWave.3. FreeWave:a. Bills the Customer for the replacement WP201® device and shipping.b. Sends a new or refurbished WP201® device to the Customer.LUM0073AA Rev Sep-2015 Page 3 of 285This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned byFreeWave®. This document cannot be reproduced in whole or in part by any means without written permission fromFreeWave Technologies, Inc.
Export NotificationFreeWave Technologies, Inc. products may be subject to control by the Export Administration Regulations(EAR) and/or the International Traffic in Arms Regulations (ITAR). Export, re-export, or transfer of theseproducts without required authorization from the U.S. Department of Commerce, Bureau of Industry andSecurity, or the U.S. Department of State, Directorate of Defense Trade Controls, as applicable, isprohibited. Any party exporting, re-exporting, or transferring FreeWave products is responsible forobtaining all necessary U.S. government authorizations required to ensure compliance with these and otherapplicable U.S. laws. Consult with your legal counsel for further guidance.FCC NotificationsThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) Thisdevice may not cause harmful interference and 2) this device must accept any interference received, includinginterference that may cause undesired operation.The content of this guide covers FreeWave Technologies, Inc. models sold under FCC ID: KNYPRW5000AA.All models sold under the FCC ID(s) listed above must be installed professionally. Any changes or modificationsnot expressly approved by the party responsible for compliance could void the user's authority to operate thisequipment.This radio must not be co-located or operating in conjunction with any other antenna or radio. Operations in the5.15-5.25GHz band are restricted to indoor usage only.FCC NEMA Installation and LabelWhere applicable, the models described in this guide must be installed in a NEMA enclosure. When anyFreeWave Technologies, Inc. module is placed inside an enclosure, a label must be placed on the outside of theenclosure. The label must include the text: "Contains Transmitter Module with FCC ID: KNYPRW5000AA."FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimum distance 21 cm between the radiator & your body.FCC Notification of Power WarningThe WP201 covered in this document has a maximum transmitted output power of 23 dBm.The antennas used MUST provide a separation distance of at least 21 cm from all persons and MUST NOT beco-located or operate in conjunction with any other antenna or transmitter.IC NotificationsThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) this device may not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operation of the device.Ce dispositif est conforme aux normes permis-exemptes du Canada RSS d'industrie. L'opération est sujette auxdeux conditions suivantes : (1) ce dispositif peut ne pas causer l'interférence, et (2) ce dispositif doit acceptern'importe quelle interférence, y compris l'interférence qui peut causer le fonctionnement peu désiré du dispositif.IC Radiation Exposure StatementThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimum distance 26 cm between the radiator and your body.Déclaration d'exposition aux radiationsCet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement noncontrôlé. Cet équipement doit être installé et utilisé avec un minimum de 26 cm de distance entre la source derayonnement et votre corps.Page 4 of 285 LUM0073AA Rev Sep-2015This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned byFreeWave®. This document cannot be reproduced in whole or in part by any means without written permission fromFreeWave Technologies, Inc.
WP201 Access Point: User ManualEurope – EU Declaration of ConformityThis device complies with the essential requirements of the R & TTE Directive 1999/5/EC. The following testmethods have been applied in order to prove presumption of conformity with the essential requirements of the R& TTE Directive 1999/5/EC:lEN60950-1 - Safety of Information Technology EquipmentlEN50385 - Generic standard to demonstrate the compliance of electronic and electrical apparatus withthe basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)lEN 300 328 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmissionsystems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrummodulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R & TTEDirectivelEN 301 893 - Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; HarmonizedEN covering essential requirements of article 3.2 of the R & TTElEN 301 489-1 - Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagneticCompatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirementslEN 301 489-17 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagneticCompatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4GHzwideband transmission systems and 5GHz high performance RLAN equipmentThis device is a 5GHz wideband transmission system (radio), intended for use in all EU member states andEFTA countries, except in France and Italy where restrictive use applies.In Italy the end-user should apply for a license at the national spectrum authorities in order to obtainauthorization to use the device for setting up outdoor radio links and/or for supplying public access totelecommunications and/or network services.This device may not be used for setting up outdoor radio links in France and in some areas the RF output powermay be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.0560GNU License NotificationSome of the software in the firmware is licensed under the GNU General Public License and other Open Sourceand Free Software licenses. You can obtain corresponding source by contacting FreeWave and requesting thesource on CD.Restricted RightsAny product names mentioned in this manual may be trademarks or registered trademarks of their respectivecompanies and are hereby acknowledged.This manual is only for use by purchasers and other authorized users of FreeWave products.No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,or for any purpose without the express written permission of FreeWave Technologies, Inc. FreeWave reservesthe right to make changes to this manual without notice. FreeWave assumes no responsibility or liability for theuse of this manual or the infringement of any copyright or other proprietary right.LUM0073AA Rev Sep-2015 Page 5 of 285This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned byFreeWave®. This document cannot be reproduced in whole or in part by any means without written permission fromFreeWave Technologies, Inc.
WP201 Product SafetyWP201 Conditions of Safe UselProvision shall be made to prevent the rated voltage from being exceeded by the transientdisturbances of more than 140% of the peak rated voltage.lThe WP201 CANNOT be used in an environment greater than pollution degree 2.Page 6 of 285 LUM0073AA Rev Sep-2015This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned byFreeWave®. This document cannot be reproduced in whole or in part by any means without written permission fromFreeWave Technologies, Inc.

Navigation menu