Frigidaire KG7 User Manual To The 15136040 E079 454c 8422 406c6ac9b8fd

User Manual: Frigidaire KG7 to the manual

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

22/04/11

A40

Furnaces
Philco KG7 Series Gas Furnace Features & Benefits
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Category IV Venting System: May be vertically or horizontally vented using either a non-direct vent (1 pipe) or direct
vent (2 pipe) system
100% fired and tested: All units and each component are tested on the manufacturing line
Low boy height: Easy to apply in low ceiling applications, work well with taller high SEER coils
Best packaging in the industry: Unique corner post design assure product will arrive to the homeowner dent free
Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat
exchanger assures long life
30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower settings
(60, 90, 120 and 180 seconds)
30 second post purge: Increases life of heat exchanger
Hot surface igniter: Innovative application of an appliance igniter. Utilizes proven Smartlite® technology
Color coded wire harness: Designed to fit the components, all with quick connect fittings for ease of service
High static blowers: All models equipped with high static blowers
90 second fixed cooling cycle blower off delay (TDR): Increases cooling performance when matched with a coil
LP convertible: Simple burner orifice and regulator spring change for easy of convertibility
Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2
lights in combination to indicate all other fault codes
Integrated control board: Incorporates connections for electronic air clear and humidifier
Two piece door design: Enhances furnace appearance and uses captured screw to prevent loosing door screws
Sealed vestibule: Reduces burner and inducer sound levels
Extended flush jacket: Jacket provides an "appliance appearance"
CSA certified design
115V, 60Hz. Gas connections are 1/2" NPT

C & L are Energy Star rated

WARRANTY ON PHILCO FURNACES
Warranty Details: Lifetime Heat Exchanger and 10 years on all parts when product is
registered, 1 year Heat Exchanger and 1 year parts when not registered
1 Year Comfort Quality Pledge: Replacement of the entire unit if Heat Exchanger fails within the first year
of operation to the original owner
Warranty Registration: Register your system within 60 days of installation

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/04/11

A40-1

Furnaces
92+ AFUE Single Stage Gas Furnace (High Efficiency)
•
•

High efficiency blower kit maximize efficiencies
Multi-speed direct drive blower designed to give a wide range of cooling capacities.
Switches on PCB, provides ultra easy motor speed selection.
Input Btuh

HP -Speed-Type-FLA

R410 Coil

Model Number

Part Number

Upflow / Horizontal
38,000

1/3 - 4 - PSC - 4.80

C6BAX24(C,U)A
C6BAX30(C,U)A

KG7SC038D23A

904639K

54,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

KG7SC054D24B

904640K

72.,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

KG7SC072D24B

904641K

72,000

1/2 - 4 - PSC - 7.50

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7SC072D35C

904642K

90,000

1.0 - 4 - PSC - 13.75

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7SC090D35C

904643K

108,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7SC108D45D

904644K

120,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7SC120D45D

904645K

Downflow

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

KG7SL054D24B

904651K

72.,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

KG7SL072D24B

904652K

90,000

1.0 - 4 - PSC - 7.50

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7SL090D35C

904653K

120,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7SL120D45D

904654K

54,000

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/04/11

A40-2

Furnaces
95+ AFUE Two Stage Gas Furnace (High Efficiency)
•
•

Energy efficient brushless DC (ECM) motor
Control board has connections for twinning
Input Btuh

HP -Speed-Type-FLA

R410 Coil

Model Number

Part Number

Fixed Speed Upflow / Horizontal

60,000

1/2 - FS - BLDC - 6.2

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

80,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7TC080D35C

904728K

100,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7TC100D35C

904729K

120,000

1.0 - FS - BLDC - 11.7

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7TC120D45D

904730K

KG7TC060D24B

904727K

Fixed Speed Downflow

60,000

1/2 - FS - BLDC - 6.2

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

KG7TL060D24B

904731K

80,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7TL080D35C

904732K

100,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

KG7TL100D35C

904733K

120,000

1.0 - FS - BLDC - 11.7

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

KG7TL120D45D

904734K

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/02/13

A41

Furnaces
Frigidaire FG7 Series Gas Furnace Features & Benefits
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Category IV Venting System: May be vertically or horizontally vented using either a non-direct vent (1 pipe) or direct
vent (2 pipe) system
100% fired and tested: All units and each component are tested on the manufacturing line
Low boy height: Easy to apply in low ceiling applications, work well with taller high SEER coils
Best packaging in the industry: Unique corner post design assure product will arrive to the homeowner dent free
Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat
exchanger assure a long life
30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower settings
(60, 90, 120 and 180 seconds)
30 second post purge: Increases life of heat exchanger
Hot surface igniter: Innovative application of a silicon nitride igniter. Utilizes proven Smartlite® technology
Color coded wire harness: Designed to fit the components, all with quick connect fittings for ease of service
High static blowers: All models equipped with high static blowers
90 second fixed cooling cycle blower off delay (TDR): Increases cooling performance when matched with a coil
LP convertible: Simple burner orifice and regulator spring change for easy of convertibility
Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2
lights in combination to indicate all other fault codes
Integrated control board: Incorporates connections for electronic air clear and humidifier
Two piece door design: Enhances furnace appearance and uses captured screw to prevent loosing door screws
Blower compartment: Sealed door to reduce air leakage and insulated for ultra quiet operation
Sealed vestibule: Reduces burner and inducer sound levels
Rounded corner jacket: Provides an "appliance appearance"
CSA certified design
115V, 60Hz. Gas connections are 1/2" NPT

C & L are Energy Star rated

WARRANTY ON FRIGIDAIRE FURNACES
Warranty Details: Lifetime Heat Exchanger and 10 years on all parts when product is
registered, 20 years Heat Exchanger and 5 year parts when not registered
10 Year Comfort Quality Pledge: Replacement of the entire unit if Heat Exchanger fails within the first 10
years when registered, 1 year when not registered
Warranty Registration: Register your system within 60 days of installation
Extended Warranty Protection: Ask your Davies Rep for specific details on labor protection plans

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/04/11

A42

Furnaces
92+ AFUE Single Stage Gas Furnace (High Efficiency)
•
•

Multi-speed direct drive blower designed to give a wide range of cooling capacities
Switches on PCB, provide ultra easy motor speed selection
Input Btuh

HP -Speed-Type-FLA

R410 Coil

Model Number

Part Number

Upflow / Horizontal
1/3 - 4 - PSC - 4.80

C6BAX24(C,U)A
C6BAX30(C,U)A

FG7SC038D23A

904639F

54,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7SC054D24B

904640F

72,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7SC072D24B

904641F

72,000

1/2 - 4 - PSC - 7.50

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7SC072D35C

904642F

90,000

1.0 - 4 - PSC - 13.75

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7SC090D35C

904643F

108,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7SC108D45D

904644F

120,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7SC120D45D

904645F

38,000

Downflow

54,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7SL054D24B

904651F

72,000

1/2 - 4 - PSC - 8.20

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7SL072D24B

904652F

90,000

1.0 - 4 - PSC - 7.50

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7SL090D35C

904653F

120,000

1.0 - 4 - PSC - 13.75

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7SL120D45D

904654F

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/04/11

A43

Furnaces
95+ AFUE Two Stage Gas Furnace (High Efficiency)
•
•

iSEER energy efficient brushless DC (ECM) motor gives up to 1 SEER point
efficiency gain in cooling
Two stage inducer optimizes efficiency on first stage heat and reduces sound levels
Input Btuh

HP -Speed-Type-FLA

R410 Coil

Model Number

Part Number

Fixed Speed Upflow / Horizontal

60,000

1/2 - FS - BLDC - 6.2

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7TC060D24B

904727F

80,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7TC080D35C

904728F

100,000

3/4 - FS - BLDC - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7TC100D35C

904729F

120,000

1.0 - FS - BLDC - 11.7

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7TC120D45D

904730F

Variable Speed Upflow / Horizontal

60,000

1/2 - VS - 6.2

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7TC060DVB

904735F

80,000

3/4 - VS - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7TC080DVC

904736F

100,000

3/4 - VS - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7TC0100DVC

904737F

120,000

1.0 - VS - 11.7

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7TC120DVD

904738F

R410 Coil:
(C=Cased, U=Uncased)

PVC & CPVC Fittings
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

22/04/11

A44

Furnaces
97+ AFUE iQ Drive® Modulating Gas Furnace (Ultra High Efficiency)
•

•
•

iQ Drive® Modulating Heating Operation Includes:
- Modulating gas valve from 100% to 50% input in 5% increments
- Time proportioning modulation down to 15%
- Variable speed inducer and blower
iQ Drive® thermostat provides modulation down to 15% and is required for furnace
operation
iSEER energy efficient brushless DC (ECM) motor gives up to 1 SEER point
efficiency gain in cooling
Input Btuh

HP -Speed-FLA

R410 Coil

Model Number

Part Number

Fully Modulating, Variable Speed Upflow / Horizontal

60,000

1/2 - Variable - 6.2

C6BAX24(C,U)B
C6BAX30(C,U)B
C6BAX35(C,U)B
C6BAX36(C,U)B

FG7MQ060DVB

904743F

80,000

3/4 - Variable - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7MQ080DVC

904744F

100,000

3/4 - Variable - 8.7

C6BAX36(C,U)C
C6BAX37(C,U)C
C6BAX42(C,U)C

FG7MQ100DVC

904745F

120,000

1.0 - Variable - 11.7

C6BAX42(C,U)D
C6BAX48(C,U)D
C6BAX60(C,U)D

FG7MQ120DVD

904746F

R410 Coil:
(C=Cased, U=Uncased)

iQ Drive® Controller & Accessories
•
•
•
•
•

IMPORTANT:

The iQ Drive® Furnace
must be controlled by the
iQ Drive® Controller.
This Controller requires
18-22 gauge stranded
wire with a grounded
shield when connecting
to furnace.

•
•
•
•

Customizable programming options for every day, weekdays, weekends or individual days
On-board diagnostics alert when service or maintenance is needed
Smart recovery gradually adjusts indoor temperatures for greater comfort
Senses humidity and has a dehumidification mode that removes moisture quickly
Communicates to various components within the iQ Drive® System and serves as
the main controller for an iQ Zone® System
Auto changeover automatically switches the thermostat from heating to cooling
No batteries required, settings are stored internally in the event of a power failure
Two color backlight for easy viewing
Energy saving features are customizable (temperature setbacks, heat pump/electric
heat or furnace changeover)
Description

Part Number

iQ Drive® Controller - Complete System Monitor & Controller

920621F

Accessories
Individually Shielded Wire, 30m (100')
2 Pair, 4 Conductor, 22 AWG Stranded (7x30) TC Conductors, 300V RMS 60ºC

B8723

Optional Outdoor Sensor

920938

PVC & CPVC Fittings
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

31/12/10

A45

Furnaces
Floor Registers - Plastic
•
•
•
•

Sleek modern look with rounded corners and blades
Durable plastic construction, will not rust
Smooth, quiet damper adjustment for desired level of air flow
Easy to install, maintenance free
Description

Brand

Part Number

3"x10" Register - White

Deflecto

RF31003B

3"x10" Register - Taupe

Deflecto

RF31028B

3"x10" Register - Brown

Deflecto

RF31036B

4"x10" Register - White

Deflecto

RF41003B

4"x10" Register - Taupe

Deflecto

RF41028B

4"x10" Register - Brown

Deflecto

RF41036B

Horizontal Conversion Kit for Frigidaire "G6" Gas Furnaces
•

For converting a 90+ upflow residential gas furnace to a horizontal
left or horizontal right position
Kit Includes

Installation Instructions (#707796)
1/2" barbed fitting (#663841)
2" to 1/2" PVC reducer bushing (#663840)
2" PVC tee (#663115)
Tube, drain hard "J" - 5" x 2" (#663763)
Tube, soft - 10" (#663764)
Tube, soft - 50" (#663765)
Tube, high temp, grey - 17.5" (#263965)
Vinyl cap - 5/8" (#663723)
Vinyl cap - 1/2" (#663684)
Hose clamps (2) - 7/8" dia. (#668914)
Reducer - 3" to 2" (#663692)

Brand

Part Number

Frigidaire

903568

Horizontal installation suspended in attic or crawl space

Filter Rack
•

Davies Supply Group Ltd.

Comes with door

Calgary (800) 661-1346
(403) 244-2161

Filter Size

Part Number

16" x 25" x 1"

FR16251

20" x 25" x 1"

FR20251

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

15/02/13

A45-1

Furnace Accessories
LP Gas Conversion Kits
For G6 & L1 Series Furnaces
•

•
•

Designed for Canadian installations. To convert a natural gas
furnace to LP/Propane gas for altitudes between 0 to 4,500
feet above sea level, the main gas orifice must be replaced.
For higher altitudes (between 2,000 & 4,500 feet above seal
level) the input must be de-rated by 10%. This can be done
by simply reducing the manifold pressure without changing
the gas orifices.
Use on standard & slow opening models only
Not for use with step regulator valves
Application

Brand

Part
Number

For use with G6 & L1 series gas furnaces using a
Honeywell Gas Valve

Frigidaire

904091A

For G7 Series Furnaces
•
•

Designed for Canadian installations to convert a natural gas
furnace to LP/Propane gas. Used for altitudes between 0 to
4,500 feet above sea level
For altitudes between 0 and 1,999 feet, only the orifice needs
to be changed. For altitudes between 2,000 and 4,500 feet,
both the orifice and the regulator pressure need to be
changed.
Application

Brand

Part
Number

For use with G7 series gas furnaces using a
Honeywell Gas Valve

Frigidaire

904915

Application

Brand

Part
Number

For use with G7MQ series gas furnaces

Frigidaire

904950

For G7MQ Modulating Furnaces

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

15/02/13

A45-2

Furnaces

This Page Left
Intentionally
Blank

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

14/12/12

A45-3

Furnaces
Flue Gas Venting System - System 636™ PVC
•
•
•

Type BH Class IIA Vent: For use with gas fired appliances producing flue gases of 65oC or less
Complete system fully certified to ULC S636
White pipe with unique blue certification markings made to SCH 40 dimensions
Description

Case Part Number Concentric Vent Kits
• These "pipe-in-pipe" kits allow for both exhaust and intake pipes to
penetrate the roof or side wall through only one hole and are
2" Concentric Vent Termination Kit (no vent screen)
3
196005
certified with mechanically fastened rain caps
• Screw/bolt assembly (included) for mechanically fastening the rain
2" Wall Termination Kit (no vent screen)
1
081216
cap can be easily removed for cleaning or maintenance
Wall Termination Kits
2" x 10' Pipe (Straight End)
10
194000
• For a traditional vent style, IPEX’s PVC Wall Termination Vent Kits
2" Coupling (HubxHub)
70
196352
require only two small wall penetrations for intake and exhaust.
• Kits include a white finishing plate with a self sealing foam back
110
2" 45o Elbow (HubxHub)
196242
that can be screwed to the exterior wall.
2" 90o Street Elbow (SPxHub)
60
196232
Testing Plug & Bushing Kit
• Allows an inline access point for flue monitoring using fully certified
55
2" 90o Long Elbow (HubxHub)
196122
System 636 components. The kit consists of a 2" x 1/2" reducer
bushing (Spig x FPT) and a removable 1/2" MPT plug.
2" 90o Extra Long Elbow (HubxHub)
40
196022
• May be installed in new installations or added to existing lines
2" Sanitary Tee (HubxHubxHub)
35
196082
when monitoring is required
• Bushing must be inserted in a 2" fitting socket
3" Flue Gas Venting System
• May be used on vent lines in any diameter
3" Concentric Vent Termination Kit (no vent screen)
3
196006
• Certified for use only on IPEX System 636 flue gas vent lines.
2" Flue Gas Venting System

3" Wall Termination Kit (no vent screen)

1

081219

3" x 10' Pipe (Straight End)

10

194001

3" Coupling (HubxHub)

60

196353

3" 45o Elbow (HubxHub)

25

196243

o

15

196233

o

23

196123

o

3" 90 Extra Long Elbow (HubxHub)

15

196023

3" Sanitary Tee (HubxHubxHub)

17

196083

3" 90 Street Elbow (SPxHub)
3" 90 Long Elbow (HubxHub)

Concentric Vent Kit

Wall
Termination
Kit

Adapters & Other Components
3" x 2" Increaser Coupling (HubxHub)

45

196364

3" x 2" Reducer Tee (HubxHubxHub)

10

196822

2" x 1 1/2" Reducer Bushing (SPxHub)
Used with #196278

80

196282

1 1/2" x 1/2" Reducer Busing (SPxHose Barb)

80

196278

2" Testing Plug & Bushing Kit (SPxPlug)

10

196143

PVC Cement, Low VOC (1 pint/473ml)

12

196040

PVC Cement, Low VOC (1 quart/946ml)

12

196041

Transition Cement - To ABS Only (1 pint/473ml)

12

196044

Testing Plug
& Bushing
Kit

Cement

Primer
Primer should be used when installing System636 products at temperatures
below 0oC
PVC/CPVC Purple Primer, Low VOC (1 pint/473ml)

12

196042

PVC/CPVC Clear Primer, Low VOC (1 pint/473ml)

12

196017

PVC/CPVC Purple Primer, Low VOC (1qt/946ml)

12

196043

NOTES:
1. Do Not interchange pipe, fittings or chemicals from different BH vent manufactures. Doing so will
void System636™ product certification and warranty.
2. Contractors must check local codes for proper venting
Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

14/12/12

A45-4

Furnaces
Condensate Water Neutralizer Kit For High Efficient Gas Furnaces
•

Inline cartridge that will raise or neutralize the pH level of the
condensate water
Limestone neutralizer material should be changed yearly

•

Description

Includes

Part Number

2" Inline cartridge

1/2" ID vinyl tubing, hose clamps & mounting ties

902377

J Hooks (Furnace Venting Accessory)

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Description

Part Number

2" x 7 1/2" DWV Swiveling J Hook (Plastic)

515-J2000

3" x 7 1/2" DWV Swiveling J Hook (Plastic)

515-J3000

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

11/06/10

A45-5

Furnaces
Variable Speed Blower Kits for Frigidaire "G6 & L1" Gas Furnaces
•
•
•
•
•
•
•
•
WARNING
Not for use with Model Numbers:
*G6RK096-12B & *GF1RK096-12B

904231 kit fits all G6/L1 series gas furnaces with an "A" width
cabinet. May be configured for air conditioning/heat pump airflows
from 1 1/2 to 3 tons nominal capacity.
904075 kit fits all G6 (RA,RC,RK&RL) series gas furnaces with "B"
& "C" width cabinets. May be field configured for air conditioning/
heat pump airflows from 2 to 5 tons nominal capacity.
Designed to maximize system efficiencies, improve air quality and
reduce sound levels
Air conditioning and heat pump efficiencies up to 16 SEER and 8.5
HSPF
ECM (electronically commutated motor) variable speed DC motor
allows for 12 selected cooling airflows and 8 heating airflows to
match any applications
Extra low speed for "fan only" operation
Extra quiet and smooth blower on and off cycles
Warranty: Carries the balance of original equipment warranty
Description

Part Number

Fits "A" Width Cabinets for G6 & L1 series

904231

Fits "B" & "C" Width Cabinets for G6: RA,RC,RK,RL series
(not suitable for "B" cabinet 1200 CFM applications)

904075

Specifications
904231

904075

Nominal Blower Size

10" x 6"

11" x 10"

Maximum Motor HP

1/2

3/4

Programmable
Variable Speed

Programmable
Variable Speed

Cooling CFM Range*

720 to 1240

720 to 1870

Heating Airflow Range*

550 to 1215

720 to 1800

Motor Type

* Airflow is held constant regardless of external static pressure within the HP and RPM
limits of the motor

Variable Speed Motor Tester - TECMate PRO™
•

Designed to assist field service technicians by troubleshooting GE
ECM 2.3 motors independently of the HVAC system
Description

Part Number

TECMate Pro™ Variable Speed Motor Tester

904232

Twinning Kit For G7 Single Stage Gas Furnaces
•
•

Davies Supply Group Ltd.

Provides the capability to combine the operation of two single stage
gas furnaces with PSC motors (not for use with 2 stage, modulating or
variable speed blower models)
Twinning function not backwards compatible with furnaces manufactured prior to June 2009
Description

Part Number

G7 Twinning Kit For Single Stage Gas Furnaces Manufactured After
June 2009

920919

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

06/09/13

A45-6

Furnaces

This Page Left
Intentionally
Blank

Davies Supply Group Ltd.

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

18/02/11

A45-7

Furnaces
Oil-Fired Forced Air Furnaces With Burner
•
•
•
•
•
•
•
•

80+ AFUE
Warranty: Limited lifetime on 14 gauge heat exchanger; 1 year parts
LFR Models: Chamber-less unit is designed for compact installations requiring front or rear flue. The unit is approved
for chimney or balanced flue venting and is ideal for electric conversions. The large filter rack can be placed on either
side, bottom or rear
LFR-VSM Models: With the Newmac Ultratech™ Motor Control. This system incorporates the furnace, control
board, motor & blower. The 24VAC powered board uses a standard external HVAC transformer, is air conditioning
ready and has LED indication and diagnostic output.
NLF Model: For traditional replacement or new home construction requiring front flue
NL2 Model: For traditional replacement or new home construction requiring rear flue
NH3 Model: Vestibuled cabinet is approved for closet clearances
All Pre & Post Purge Burners can be used with a Sealed Venting System (SVS). This system allows direct
venting without chimneys. Required for installation: Sealed Venting Unit, Oil Flex Vent & Air Duct.

Description

Flue

Btuh
Output

AC Rating
(tons)

Highboy

Front / Rear

81,000

Highboy

Front / Rear

Highboy

Direct Drive Blower Motor

Burner

Brand

Part Number
(Model Number)

4

F3 Riello

Newmac

8010050-3*
(LFR)

1/3

4

Beckett AFG

Newmac

8010050-3B*
(LFR80)

3

1/3

4

Beckett AFG
Pre & Post Purge

Newmac

8010050-3BP*
(LFR)

81,000

3

1/3

Variable
Speed

Beckett AFG

Newmac

8010081-3B*
(LFR-VSM)

Front / Rear

81,000

3

1/3

Variable
Speed

Beckett AFG
Pre & Post Purge

Newmac

8010081-3BP*
(LFR-VSM)

Lowboy

Front

118,000

3.5

1/2

4

Beckett AFG

Newmac

8010033DD-3B
(NLF118)

Lowboy

Rear

77,000

3.5

1/2

4

Beckett AFG

Newmac

8010027DD-3B*
(NL2)

Highboy

Top

101,000

3

1/2

4

Beckett AFG

Newmac

5010035
(NH3-101)

HP

Speed

3

1/3

81,000

3

Front / Rear

81,000

Highboy

Front / Rear

Highboy

* Energy Star Rated

Davies also stocks a selection
of Beckett Burners.
Call Davies Pros On Controls
for proper application.
8010050-3B (LFR)

5010035 (NH3)

Replacement Parts For 8010050-3B (LFR80) Furnace With Beckett AFG Burner
Description
Hago Nozzles
Blower Unit (less Motor)

Davies Supply Group Ltd.

Specifications

Part Number

Capacity (USgal/hr): 0.50 Spray Angle: 45° - B

21566108

Capacity (USgal/hr): 0.55 Spray Angle: 45° - B

21566109

Bore: 1/2" Fan: 10" dia. Rotation: CW

2040116T

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433

15/01/10

A45-8

Furnaces
Combination Oil/Gas & Wood Furnace With Beckett AFG Burner
•
•
•
•
•
•
•
•

Separate combustion chamber for oil/gas
Extra large brick lined firebox
Pre-heated combustion air is introduced by a thermostatically controlled draft system
Disposable air filters
Warranty: 10 year limited on the heat exchanger
CL85/95 Model: Automatic switching from wood to oil
CL86/96C Model: Automatic switching from wood to oil, separate
thermostats & large fire door. Burns wood without grates for better
control and efficiency.
CL86/96G Model (Wood/Oil/Coal): Where wood or coal is available, this model gives the ultimate conservation choice. Large firebox
and firedoor with shaker grates for coal.
CFM

Btuh
Output

Blower
Motor

Brand

Part Number
(Model Number)

900/1000

82,000/94,000

1/3 HP

Newmac

8010012-2B
(CL85/95)

1200/1200

86,000/ 96,000

1/3 HP

Newmac

8010015-2B
(CL86/96C)

1200/1200

86,000/ 96,000

1/3 HP

Newmac

8010014-2B
(CL86/96G)

Wood Only Furnaces
•
•

8010024G

Davies Supply Group Ltd.

WA0 Model: Is a wood add-on furnace designed for operation in
conjunction with an existing residential oil furnace system with a firing rate of .75 gph to 1.10 gph. 10 year limited warranty.
WB100 Model: Can be used alone or in conjunction with an existing
residential system. 10 year limited warranty on the heat exchanger.
CFM

Btuh
Output

Blower
Motor

Brand

Part Number
(Model Number)

1200

100,000

-

Newmac

8010024G
(WA0)

1200

100,000

1/2 HP

Newmac

8010001
(WB100)

8010001

Calgary (800) 661-1346
(403) 244-2161

Lethbridge (877) 595-7707
(403) 381-7707

Saskatoon (877) 355-3377
(306) 933-2433



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2013:09:05 11:19:19-06:00
Modify Date                     : 2013:09:05 11:19:19-06:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:d4c7be4d-a23b-4448-8013-1ededf742f85
Instance ID                     : uuid:959b597b-5d5f-4ac0-8451-dfaa12d74418
Page Count                      : 16

EXIF Metadata provided by EXIF.tools