Fuji Film 02000001 INSTALL THE MODULE INTO A DIGITAL CAMERA IN MARKET User Manual S 190980 01E

Download:
Mirror Download [FCC.gov]
Document ID	1624201
Application ID	eC/H21Ej30efC+Zean38gw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.16kB (339554 bits)
Date Submitted	2012-01-19 00:00:00
Date Available	2012-07-17 00:00:00
Creation Date	2011-12-10 15:54:23
Producing Software	Acrobat Distiller 9.4.6 (Windows)
Document Lastmod	2012-01-18 14:34:27
Document Title	S-190980-01E.xls
Document Creator	PScript5.dll Version 5.2.2
Document Author:	610153

FZ09396-100
User’s Manual
-1-
Notice:
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of this device.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device is to be used only for mobile and fixed applications. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help
The host device shall also comply with the certification labeling requirements of each of the
modules it contains.
A reference to the enclosed module displaying its FCC and IC ID certification number.
Recommended wording:
* Contains FCC ID: W2Z-02000001
* Contains IC ID: 7736B-02000001
（
APPROVED BY
SPECIFICATON
DWM-W078
）
DESIGNED BY
技術部
技術部
技術部
'10.11.28
'10.11.28
'11.11.28
統括課長
和気
MODEL:
CHECKED BY
Formed on.
主幹
内田
町田
2011.11.28
This products Standard shall be applied to the Wireless LAN module(DWM-W078)
本規格は、無線LANモジュール(DWM-W078)について規定する。
Contents.
Item
No.
Product summary
1-1 Scope
1-2 General explanation
Page
Item
No.
Page
2-1
2-2
2-3
Hardware specification
Block diagram
Environmental condition
Power supply
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
4-1
4-2
Electrical characteristics
Channel plan
Power Sequence
Interface specification
SDIO Protocol Timing
Current consumption
Antenna specification
Reciever characteristics
Transmitter characteristics
Measurement method
Tx test condition
Rx test condition
4-10
8-10
11
11
11
5-1
5-2
5-3
Mechanical specification
Dimension
Weight
Terminal number and name
12
12
12
12
Reliability Test
13
Revision
14
SYM.
GROUP NO.
DWG.NO.
S 19 0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
1.Product Summary
製品概要
1-1. Scope
2.4 GHz WLAN module with integrated antenna
(IEEE802.11 b/g/n supported）
2.4GHz帯 アンテナ一体 無線LANモジュール
(IEEE802.11 b/g/n 準拠）
1-2. General explanation
Standard
Frequency
Host Interfase
Frequency Bandwidth
Weight
IEEE802.11ｂ/ｇ/n
2.4-2.4835GHz
SDIO ver2.0
20MHz
0.5g typ
・Chipset: MARVELL Semiconductor Inc. 88W8787L（CPS Package）
・Modulation Types: DBPSK, DQPSK and CCK with 802.11b mode
OFDM(BPSK, QPSK, 16-QAM and 64-QAM) with 802.11g/n mode
・Data rate: 1,2,5.5 and 11 with 802.11b mode
6,9,12,18,24,36,48 and 54 with 802.11g mode
MCS0-7 with 802.11n mode
・Security: WEP(64 and 128bits), WPA-PSK(TKIP/AES) and WPA2-PSK(TKIP/AES)
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
2.Hardware Specification
2-1. Block diagram
ブロック図
Anntena
SDIO I/F
RF TX
PMU(1.2V)
Power
Amp
RF Switch
Connector
LPF
VIO
Pdn
DPDT
RF Switch
88W8787L
MARVELL
88W8787 (CSP)
RF RX
HostWakeup
VDD33
+1.8V
32kHz
RTC Clock
2-2. Environmental condition
環境条件
1) Operating environment
動作環境条件
Operating temperature range
動作温度範囲
Operating humidity range
動作湿度範囲
2) Storage environment
保存環境条件
Storage temperature range
保存温度範囲
Storage humidity range
保存湿度範囲
Serial
EEPROM
38.4MHz
XTAL
LDO
-20 ～ 70 ℃
20%～80%(None dew) 結露無き事
-30 ～ 85 ℃
20%～85%(None dew) 結露無き事
2-3. Power supply
No
Symbol
VDD33
VIO
MIN．
2.97
1.62
2.50
2.97
Value
TYP．
3.30
1.80
2.60
3.30
MAX．
3.63
1.98
2.70
3.63
UNIT
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
3.Electrical Characteristics
電気的特性
3-1. Channel Plan チャンネルプラン
IEEE802.11b/g/n(HT20)
CH ID
CH ID
Freq
2412 MHz
2417 MHz
2422 MHz
2427 MHz
10
2432 MHz
CH ID
11
12
13
Freq
2437 MHz
2442 MHz
2447 MHz
2452 MHz
2457 MHz
Freq
2462 MHz
2467 MHz
2472 MHz
3-2. Power Sequence
電源仕様
3-2-1. Recommended power on timing 電源投入推奨タイミング
T0
VDD33
T1
VIO
T4
T3
Pdn
T2
T2
Host controll enable
T0≧0ms T1 ≧ 750ms
T2 ≧ 4ms
T3 ≧ 0ms T4 ≧ 250ms
3-2-2. Recommended power off timing 電源切断推奨タイミング
T6
VDD33
VIO
T5
Pdn
T5 ≧ 0ms T6 ≧ 0ms
3-3. Interface specification (SDIO)
Parameter
Input high voltage
Input low voltage
Input hysteresis
Output high voltage
Output low voltage
Min
0.7*VIO
-0.3
200
VIO-0.4
Typ
Max
VIO+0.3
0.3*VIO
0.4
Units
mV
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
3-4. SDIO Protocol Timing
3-4-1 Normal Mode
fpp
Twl
Twh
Tisu
Tih
Todly
3-4-2 High Speed Mode
fpp
Twl
Twh
Tisu
Tih
Toh
Todly
3-4-3. SDIO Timing Data
Symol
Parameter
fpp
Clock Frequency
Twl
Clock Low Time
Twh
Clock High Time
Tisu
Input Setup Time
Tih
Input Hold Time
Todly
Toh
Output Delay Time
Output Hold Time
Mode
Normal
High Speed
Normal
High Speed
Normal
High Speed
Normal
High Speed
Normal
High Speed
High Speed
Min
10
10
2.5
Typ
Max
25
50
7.33
Units
MHz
MHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
3-5. Current consumption
消費電流
TX mode
送信時消費電流
Standard
802.11b
@14dBm
802.11g
@12dBm
802.11n
@12dBm
Data rate
Current Consumption(mA)
VIO
VDD33
3.3V
1.8V
Max.
Typ.
Max.
Typ.
Typ.
Max.
11Mbps
220
260
0.33
0.092
54Mbps
220
260
0.33
0.070
HT20 MCS7
220
260
0.33
0.051
Standard
Data rate
Current Consumption(mA)
VIO
VDD33
3.3V
1.8V
Max.
Typ.
Max.
Typ.
Max.
Typ.
802.11b
11Mbps
140
180
0.33
0.391
802.11g
54Mbps
140
180
0.33
1.600
802.11n
HT20 MCS7
140
180
0.33
1.500
RX mode
受信時消費電流
Power Save Mode
Standard
DTIM=1
DTIM=3
Deep sleep
Pdn
Current Consumption(mA)
VIO
VDD33
1.8V
3.3V
Typ.
Typ.
Typ.
0.001
4.103
0.546
0.001
1.662
0.586
0.400
0.603
0.001
0.053
0.349
0.183
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
）
3-6. Antenna specification (Referential specification)
アンテナ特性（参考特性）
DSC set installed
DSCセット組み込み時
Standard
Frequency Band
周波数帯域
Impedance
インピーダンス
ＶＳＷＲ
MIN
TYP
MAX
Unit
2412
－
Nominal 50
公称 50
2.5
2472
MHz
－
Ω
3.0
※アンテナ共振周波数調整はDSCセット組み込みで行っております。
モジュール単体特性での保証ではございません。
疑義が生じた場合、ＤＳＣセット組み込みを行い確認を行う事とする。
Antenna resonant frequency is adjusted with DSC set installed.
This does not guarantee specification of the module alone.
In case of doubt, verification will be perfomed with DSC set installed.
3-７. Receiver characteristics
受信特性
1)Minimum Receiver Sensitivity
最小受信感度
(Ta=25℃)
Standard Data rate
1 Mbps
2 Mbps
802.11b
5.5 Mbps
11 Mbps
6 Mbps
9 Mbps
12 Mbps
802.11g 18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
MCS0
MCS1
MCS2
802.11n
MCS3
HT20
MCS4
MCS5
MCS6
MCS7
MIN.
TYP.
-94
-91
-88
-84
-87
-87
-85
-83
-80
-79
-73
-71
-86
-83
-81
-79
-75
-71
-69
-67
MAX.
-80
-80
-76
-76
-82
-81
-79
-77
-74
-70
-66
-65
-82
-79
-77
-74
-70
-66
-65
-64
Unit
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
PER
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
2）Maximum Receiver Sensitivity
最大受信感度
(Ta=25℃)
Standard Data rate
1M，2M
802.11b
5.5M，11M
MIN.
-4
-10
TYP.
MAX.
Unit
PER
dBm
8%
802.11g 6M～54M
-20
dBm
10%
802.11n
MCS0～7
HT20
-20
dBm
10%
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
(
3-8.
Transmitter characteristics ／ 送信特性
1)Output Target Power Levels
出力レベル
The difference of the output is within ±2.5dB. (Ta=25℃)
出力公差は、±2.5ｄB以内(Ta=25℃)の事
1) - 1
2.4GHz Band
11b (DSSS)
Ch
10
11
12
13
Freq.
(MHz）
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
2462
2467
2472
Target Power (dBm)
1M
14
14
14
14
14
14
14
14
14
14
14
14
14
1) - 2
2.4GHz Band
11g (OFDM)
Ch
Freq.
(MHz）
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
2462
2467
2472
10
11
12
13
2M
14
14
14
14
14
14
14
14
14
14
14
14
14
5.5M
14
14
14
14
14
14
14
14
14
14
14
14
14
11M
14
14
14
14
14
14
14
14
14
14
14
14
14
Ｔａｒｇｅｔ Power (dBm)
6M
10
12
12
12
12
12
12
12
12
12
10
12
12
9M
10
12
12
12
12
12
12
12
12
12
10
12
12
12M
10
12
12
12
12
12
12
12
12
12
10
12
12
18M
10
12
12
12
12
12
12
12
12
12
10
12
12
24M
10
12
12
12
12
12
12
12
12
12
10
12
12
36M
48M
10
12
12
12
12
12
12
12
12
12
10
12
12
54M
10
12
12
12
12
12
12
12
12
12
10
12
12
10
12
12
12
12
12
12
12
12
12
10
12
12
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（
1) - 3
）
2.4GHz Band
11n/HT20 (OFDM)
Ch
10
11
12
13
Freq.
Target Power (dBm)
(MHz）
MCS0
MCS1
MCS2
2412
10
10
10
2417
12
12
12
2422
12
12
12
2427
12
12
12
2432
12
12
12
2437
12
12
12
2442
12
12
12
2447
12
12
12
2452
12
12
12
2457
12
12
12
2462
10
10
10
2467
12
12
12
2472
12
12
12
MCS3
10
12
12
12
12
12
12
12
12
12
10
12
12
MCS4
MCS5
10
12
12
12
12
12
12
12
12
12
10
12
12
MCS6
MCS7
10
12
12
12
12
12
12
12
12
12
10
12
12
10
12
12
12
12
12
12
12
12
12
10
12
12
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
10
12
12
12
12
12
12
12
12
12
10
12
12
2)EVM
ITEM
11b
11b
11b
11b
11g
11g
11g
11g
11g
11g
11g
11g
11n
11n
11n
11n
11n
11n
11n
11n
Max
HT20
HT20
HT20
HT20
HT20
HT20
HT20
HT20
5.5
11
12
18
24
36
48
54
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Mbps
Unit
-9
-9
-9
-9
-5
-8
-10
-13
-16
-19
-22
-25
-5
-10
-13
-16
-19
-22
-25
-28
35.0
35.0
35.0
35.0
56.2
39.8
31.6
22.4
15.8
11.2
7.9
5.6
56.2
31.6
22.4
15.8
11.2
7.9
5.6
4.0
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（ 10 ）
3)Spectrum Mask
ITEM
DS
DS
DS
OFDM
OFDM
OFDM
OFDM
HT20
HT20
HT20
HT20
Max
0MHz～±11MHz
ｆ±11MHz～±22MHz
f±22MHz～
0MHz～±9MHz
f±11MHz
f±20MHz
f±30MHz
0MHz～±9MHz
f±11MHz
f±20MHz
f±30MHz
-28
-50
-20
-28
-40
-20
-28
-45
Unit
dBr
dBr
dBr
dBr
dBr
dBr
dBr
dBr
dBr
dBr
dBr


-20dBr
-28dBr

-28dBr
-40dBr
-50dBr

-20dBr
-28dBr
-45dBr
4)Frequency Accuracy
周波数偏差
Condition
Ta = 25℃
Ta =-20℃～70℃
Min
Typ
-10
-25
Max
10
25
Unit
ppm
ppm
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（ 11 ）
4.Measurement method
測定方法
Standard test shall be conducted under the following conditions. However, if no question arises as to
judgment, the test can be conducted in the range of temperature 20℃-30℃
and relative humidity 45%-70%.
Measurement needs to be performed in a shield room.
標準試験は、下記の条件で行うものとする。但し、判定に疑義を生じない場合は、温度20℃～30℃
相対湿度45%～70%の範囲にて試験してもよい。
測定は、シールドルーム内で行うこと。
Temperature 温度
： 25±3℃
Humidity 湿度
： 65±10%
Power supply voltage 3.3V ：Refer to 2-3. 2-3を参照の事
電源電圧
4-1. TX test condition.
送信試験環境
SDIO/IF
Coaxial
---------------- DUT --------------Spectrum
PC -----------Analyzer
RF Switch
OR
Connector
Power
Meter
OR
WLAN
Tester
4-2. RX test condition
受信試験環境
SDIO/IF
Coaxial
Golden unit
-------------- DUT --------- ATT ---PC --------RF Switch
Connector
---- PC
OR
Signal generator
OR
WLAN
Tester
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（ 12 ）
5. Mechanical Specifications
機械的仕様
5-1. Dimension
寸法
9.0mm×19.5mm, t= 1.6mm MAX
5-2. Weight
重量
Typical 0.5g
5-3. Terminal number and name
端子・端子名
Connector model
コネクタ型名： 14FZ-SM1-GAN-TB JST
No.
10
11
12
13
14
Name
Pdn
VIO
SD_CMD
SD_D0
SD_D1
GND
SD_CLK
GND
SD_D3
SD_D2
GND
VDD33
VDD33
Host WakeUp
Type
IN
POWER
IO
IO
IO
GND
IO
GND
IO
IO
GND
POWER
POWER
OUT
Function
H/W reset
I/F power supply
SDIO command
SDIO data 0
SDIO data 1
GND
SDIO clock
GND
SDIO data 3
SDIO data 2
GND
Main power supply 3.3V
Main power supply 3.3V
Host wake up
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．
（ 13 ）
6.Reliability Test
信頼性試験
NO
Item 項目
1 Low temperature
storage
低温放置
2 High temperature
storage
高温放置
High temperature
3 humidity storage
高温高湿放置
4 Low temperature
operation
低温動作
5 High temperature
operation
高温動作
Test Conditions 試験条件
Operates properly after 1000 hours at -30℃, followed by more than 2 hours at
ambient temperature/humidity.
-30℃、1000時間放置、その後常温常湿中に取り出し、2時間以上放置後に、正
常に動作する事。
Operates properly after 1000 hours at +85℃, followed by more than 2 hours at
ambient temperature/humidity.
＋85℃、1000時間放置、その後常温常湿中に取り出し、2時間以上放置後に、正
常に動作する事。
Operates properly after 1000 hours at +85℃, 85%RH followed by more than 2
hours at ambient temperature/humidity .
＋85℃、85％RHにて1000時間放置、その後常温常湿中に取り出し、2時間以上
放置後に正常に動作する事。
Operates properly after 500 hours at -20℃, followed by more than 2 hours at
ambient temperature/humidity .
-20℃で、500時間通電放置、その後常温常湿中に取り出し、2時間以上放置後 Test condition: No condensing
試験条件：露無き事。
に、正常に動作する事。
Operates properly after 500 hours at +70℃, followed by more than 2 hours at
ambient temperature/humidity.
＋70℃で、500時間通電放置、その後常温常湿中に取り出し、2時間以上放置後
に、正常に動作する事。
Operates properly after 1000 hours at +60℃, 90%RH followed by more
than 2 hours at ambient temperature/humidity .
humidity operation
＋60℃、90％RHにて1000時間通電放置、その後常温常湿中に取り出
高温高湿動作
し、2時間以上放置後に正常に動作する事。
6 High temperature
Thermal impact
test 熱衝撃試験
Operates properly after 100 cycles where one cycle is -30℃/30 min and
+85℃/30min.
-30℃/30分、+85℃/30分を1サイクルとして、100サイクル実施後、正常に動作す
る事。
Electrostatic
discharge
静電気放電
±2.0kV applied to connector terminal and antenna terminal ±2.0kV、印
加箇所；コネクタ端子、アンテナ端子
Alone
単体落下
Drop test
落下試験
Test conditions/試験条件：
Non operating state/製品非動作状態
Discharged capacity /放電容量：100pF
Discharged resistance /放電抵抗：1.5kΩ
Application ／印加回数：3回
Free drop three times on hard wooden board from 50 cm. Must operate
normally. Appearance: no functional damage.
木板に対して、50cm高さより自然落下。3回。JIS C 60068-2-32に従う。
動作上問題なき事。/外観：実使用上問題なき事。
Total five drops on bottom and sides of carton on hard wooden board from
50 cm. Must operate normally. Appearance: no functional damage.
木板に対して、50cm高さより自然落下。
梱包箱底面及び側面 計5回
Must operate normally after vertical and two horizontal direction vibration for 2 hrs each at
frequency 10-50 Hz, amplitude 1.5 mm P-P.
振動周波数 10～50Hzにて、振幅1.5mmP-Pとし、上下：2ｈ，左右：2h，前後：2hにて加振後、
正常に動作する事。
Packaged
梱包落下
10
Vibration test
振動試験
11 Package vibration Must operate normally after testing under conditions listed below.
test
梱包振動試験
欄外に示す条件にて試験を行い、試験後正常に動作する事.
Package vibration test conditions./梱包振動試験条件
Frequency[Hz]
Level[(ms^2)^2/Hz]
Slope[dB/oct]
0.048
+13.75
3～6
1.15
6～18
-9.34
18～40
0.096
40
-1.29
40～200
0.048
200
Test Direction
Test Duration
Three directions
X,Y,Z
3方向
4 hours each
direction
各方向
4時間
DWG.NO.
0980
ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ．

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 15
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:58680886-43e4-4d7c-840c-b7c070ee8afb
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Create Date                     : 2011:12:10 15:54:23+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:01:18 14:34:27+09:00
Metadata Date                   : 2012:01:18 14:34:27+09:00
Document ID                     : uuid:f77275e7-9d0c-47de-8f1e-92f749e901f9
Instance ID                     : uuid:67922bdf-94dd-439f-9295-66da5d002b37
Format                          : application/pdf
Title                           : S-190980-01E.xls
Creator                         : 610153
Author                          : 610153

EXIF Metadata provided by EXIF.tools