Fuji Film 02000002 Wireless LAN Module User Manual 00 LX22 OM 200 EN indb

Download:
Mirror Download [FCC.gov]
Document ID	2842491
Application ID	CnWNV7Lwz2WP/4evH2UKCQ==
Document Description	[STC]User Manual_Part II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	476.52kB (5956492 bits)
Date Submitted	2015-12-15 00:00:00
Date Available	2016-06-13 00:00:00
Creation Date	2015-12-10 20:51:09
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2015-12-10 20:51:28
Document Title	$00 LX22_OM_200-EN.indb
Document Creator	Adobe InDesign CS4_J (6.0.6)
Document Author:	S01-01

The DISP/BACK Button
The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor.
■ Viewfinder: Shooting
Standard
■ LCD Monitor: Shooting
Information off
Standard
4000
5.6
4000
5.6
Information off
400
400
4000
5.6
Info display
26
400
The DISP/BACK Button
■ Customizing the Standard Display
To choose the items shown in the standard display:
1 Display standard indicators.
Press the DISP/BACK button until standard indicators are displayed.
Select A SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu.
3 Choose items.
Highlight items and press MENU/OK to select or deselect.
•
•
•
•
•
•
•
•
FRAMING GUIDELINE
ELECTRONIC LEVEL
FOCUS FRAME
AF DISTANCE INDICATOR
MF DISTANCE INDICATOR
HISTOGRAM
SHOOTING MODE
APERTURE/S-SPEED/ISO
•
•
•
•
•
•
•
•
INFORMATION BACKGROUND
EXPOSURE COMPENSATION
FOCUS MODE
PHOTOMETRY
SHUTTER TYPE
FLASH
CONTINUOS MODE
DUAL IS MODE
•
•
•
•
•
•
•
First Steps
2 Select DISP. CUSTOM SETTING.
WHITE BALANCE
FILM SIMULATION
DYNAMIC RANGE
FRAMES REMAINING
IMAGE SIZE/QUALITY
MOVIE MODE & REC. TIME
BATTERY LEVEL
4 Save changes.
Press DISP/BACK to save changes.
5 Exit the menus.
Press DISP/BACK as needed to exit the menus and return to the shooting display.
R See page 8 for the locations of these items in the displays.
27
The DISP/BACK Button
Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two
lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
■ Viewfinder/LCD Monitor: Playback
Standard
Information off
Info display
Favorites
12/31/2050 10:00 AM
12/31/2050 10:00 AM
12/31/2050 10:00 AM
1/4000
1/4000
5.6
+21/3
400
5.6
400
+21/3
NEXT
Histograms
Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Shadows
Highlights
Optimal exposure: Pixels are distributed in an even curve throughout the tone range.
Overexposed: Pixels are clustered
on the right side of the graph.
No. of pixels
Pixel brightness
28
Underexposed: Pixels are clustered
on the left side of the graph.
FAVORITES
Basic Photography and Playback
Taking Photographs
This section describes how to take pictures using program AE (mode P). See pages 000 – 000 for information on S, A, and M modes and pages 000 and 000 for information on the options available in
auto mode.
1 Adjust settings for program AE.
Confirm that P appears in
the display.
Q If AUTO is displayed in red,
press a function button (by
default, Fn2/AUTO) to exit
auto mode (P 000).
4000 5.6
400
R Image stabilization (P 98)
is recommended.
④
The Q Button
The Q button can be used to view and adjust
camera settings (P 40).
Basic Photography and Playback
A Shutter speed (P 000): Select A (auto)
B Aperture (P 000): Select A (auto)
C Focus mode (P 000): Select S (single AF)
D DRIVE mode (P 000): Select B (still image)
29
Taking Photographs
2 Ready the camera.
4 Focus.
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
Frame the picture with your subject in the center of the display and
press the shutter button halfway to
focus.
R If the subject is poorly lit, the AF-assist illuminator may light (P 000).
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
fingers and other objects
away from the lens, flash,
and AF-assist illuminator.
If the camera is able to focus, it will beep twice and
the focus indicator and area in focus will glow
green. Focus and exposure will lock while the
shutter button is pressed halfway.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the focus indicator will blink white.
3 Frame the picture.
Lenses with Zoom Rings
Use the zoom ring to frame
the picture in the display.
5 Shoot.
Zoom
ring
30
Smoothly press the shutter button
the rest of the way down to take the
picture.
Viewing Pictures
Viewing Pictures Full Frame
Pictures can be viewed in the viewfinder or LCD monitor. When taking important pictures, take a test
shot and check the results.
To view pictures full frame, press a.
100-0001
R Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display
correctly and that playback zoom may not be available.
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to five stars.
Basic Photography and Playback
Additional pictures can be viewed by pressing the selector left or right or rotating the command dial. Press the selector or rotate the dial right to view pictures in the order recorded,
left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the desired frame.
31
Viewing Pictures
Viewing Photo Information
The photo information display changes
each time the selector is pressed up.
Basic data
Zooming in on the Focus Point
Press the center of the command dial to zoom in on
the focus point. Press the center of the command
dial again to return to full-frame playback.
Info display 1
12/31/2050 10:00 AM
12/31/2050 10:00 AM
1/4000
1/4000
5.6
+21/3
400
5.6
400
+21/3
NEXT
LENS
FOCAL LENGTH
COLOR SPACE
LENS MODULATION OPT.
S.S 1/4000
F 5.6
ISO 400
23.0mm
F5.6
23.0mm
sRGB
ON
+21/3
NEXT
Info display 2
R Rotate the command dial to view other images.
32
Viewing Pictures
Playback Zoom
Press k to zoom in on the current picture, n to zoom out (to view multiple images, press n when
the picture is displayed full frame; P 34). When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display. Press DISP/BACK or MENU/OK to exit zoom.
Zoom indicator
R The maximum zoom ratio varies with image size (P 93). Playback zoom is not available with cropped or resized
copies saved at a size of a.
Basic Photography and Playback
Navigation window shows
portion of image currently
displayed
33
Viewing Pictures
Multi-Frame Playback
To change the number of images displayed, press n when a picture is displayed full frame.
Press n to view
more images.
100-0001
Press k to view
fewer images.
Use the selector to highlight images and press MENU/OK to view the highlighted image full frame (to
zoom in on the selected image, press k when the picture is displayed full frame; P 33). In the nineand hundred-frame displays, press the selector up or down to view more pictures.
34
Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures, press the b button when a
picture is displayed full frame and choose from the options below. Note that deleted pictures can not
be recovered. Copy important pictures to a computer or other storage device before proceeding.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
FRAME
SELECTED FRAMES
ALL FRAMES
Description
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture
(a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or print orders are shown
by S). When the operation is complete, press DISP/BACK to display a confirmation dialog, then highlight OK
and press MENU/OK to delete the selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not
be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 101).
R Pictures can also be deleted by A ERASE from playback menu.
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete
the pictures.
Basic Photography and Playback
Option
35
Using the Flash
Use the built-in flash for additional lighting when shooting at night or indoors under low light.
1 Press the N button to raise the flash.
Q The flash may contact accessories mounted on the hot shoe. If necessary,
remove accessories before raising the flash.
2 Press the function button (Fn5) to display the following options, then
use the selector to highlight an option and press MENU/OK to select.
Mode
AUTO (AUTO FLASH)/
FLASH)/
K (RED EYE REDUCTION) *
N (FORCED FLASH)/
FLASH)/
L (FORCED FLASH) *
F (SLOW SYNCHRO)/
SYNCHRO)/
M (RED EYE & SLOW) *
l (2ND CURTAIN SYNC.)/
SYNC.)/
d (2ND CURTAIN SYNC.) *
Description
The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration when shooting in bright light.
Capture both the main subject and the background under low
light (note that brightly lit scenes may be overexposed).
The flash fires immediately before the shutter closes.
The built-in flash can be used to control optional remote flash
units.
The flash does not fire even when the subject is poorly lit. A
P (SUPPRESSED FLASH)
tripod is recommended.
D (COMMANDER)
* Red-eye removal is available in these modes when Intelligent Face Detection is active (P 000)
and red-eye removal is on (P 000). Red-eye removal minimizes “red-eye” caused when light from
the flash is reflected from the subject’s retinas as shown in the illustration at right.
36
Using the Flash
Q Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash.
R Lowering the flash turns the flash off (P) and prevents it firing even when the subject is poorly lit; use of a
tripod is recommended. Lower the flash where flash photography is prohibited or to capture natural lighting
under dim light. We also recommend that you lower the flash when the camera is off.
R If p is displayed when the shutter button is pressed halfway, the flash will fire when the photo is taken.
R Except in commander mode, the flash may fire several times with each shot. Do not move the camera until
shooting is complete.
Optional Flash Units
The camera can also be used with optional FUJIFILM shoe-mounted flash units. Do not use third-party flash
units that apply over 300 V to the camera hot shoe.
Basic Photography and Playback
Flash Sync Speed
The flash will synchronize with the shutter at shutter speeds of 1/180 s or slower.
37
Basic Movie Recording and Playback
Recording Movies
The camera can be used to record short high-definition movies. Sound is recorded in stereo via the
built-in microphone; do not cover the microphone during recording.
1 Press the function button (Fn7/Fn) to start recording.
Recording indicator
Time remaining
2 Press the button again to end recording. Recording ends automatically when the maximum
length is reached or the memory card is full.
38
R Zoom can be adjusted while recording is in progress.
R Sensitivity and frame size and rate can be selected
using the W MOVIE SET-UP option (P 000). Focus mode is selected using the focus mode selector (P 68); for continuous focus adjustment, select
C, or choose S and enable Intelligent Face Detection (P 000, 000). Intelligent Face Detection is not
available in focus mode M.
R During recording, exposure compensation can be
adjusted by up to ±2 EV.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Depth of Field
Adjust aperture before recording begins. Choose
low f-numbers to soften background details.
Recording High-Definition (HD) Movies
Using an External Microphone
Sound can be recorded with external microphones that connect using jacks 2.5 mm
in diameter; microphones that require bus power can not be used. See the microphone manual for details.
R The dialog shown at right will be displayed when a microphone is connected to the microphone/remote release connector. Press MENU/OK and select MIC/REMOTE RELEASE >
m MIC (P 000).
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
Basic Movie Recording and Playback
39
Viewing Movies
During playback, movies are displayed as shown at right. The following operations
can be performed while a movie is displayed:
12/31/2050 10:00 AM
Operation
Description
Press the selector down to start playback. Press again to pause. While playback is
Start/pause playback paused, you can press the selector left or right to rewind or advance one frame Movie icon
at a time.
End playback
Press the selector up to end playback.
Adjust speed
Press the selector left or right to adjust playback speed during playback.
Press MENU/OK to pause playback and display volume controls. Press the selector
up or down to adjust the volume; press MENU/OK again to resume playback. VolAdjust volume
ume can also be adjusted using the b SOUND SET-UP > PLAYBACK VOLUME
option in the playback menu (P 107).
PLAY
±0
Progress is shown in the display during playback.
Progress bar
29m59s
Q Do not cover the speaker during playback.
Q Sound is not played back if OFF is selected for o SOUND & FLASH (P 000).
STOP
PAUSE
Playback Speed
Press the selector left or right to adjust playback speed during playback. Speed is shown by the Arrow
number of arrows (M or N).
29m59s
STOP
40
PAUSE
The Q (Quick Menu) Button
Using the Q Button
Press Q for quick access to selected options.
The Quick Menu Display
At default settings, the quick menu contains the following items.
SELECT CUSTOM SETTING
BASE
SET
u SELECT CUSTOM SETTING ...................... 84
N ISO ........................................................... 75
U DYNAMIC RANGE ................................... 93
D WHITE BALANCE .................................... 82
h NOISE REDUCTION ................................. 94
O IMAGE SIZE ............................................. 93
T IMAGE QUALITY ..................................... 93
P FILM SIMULATION ................................. 59
r HIGHLIGHT TONE ................................... 94
s SHADOW TONE ....................................... 94
f COLOR ..................................................... 94
q SHARPNESS ............................................ 94
B SELF-TIMER ............................................ 79
F AF MODE ............................................... 000
p FLASH MODE .......................................... 36
J EVF/LCD BRIGHTNESS.......................... 108
The quick menu shows the options currently selected for items B—P, which can be changed as
described on page 000. The u SELECT CUSTOM SETTING item (item A) shows the current custom
settings bank:
• q: No custom settings bank selected.
• t — u: Select a bank to view the settings saved using the K EDIT/SAVE CUSTOM SETTING
option in the shooting menu (P 000).
The Q (Quick Menu) Button
R h CUSTOM and k COLOR TEMPERATURE white balance options can not be
accessed using the Q button. Use a function button or the shooting menu.
41
Using the Q Button
Viewing and Changing Settings
1 Press Q to display the quick menu during shooting.
2 Use the selector to highlight items and rotate the command dial to change.
3 Press Q to exit when settings are complete.
42
Using the Q Button
Editing the Quick Menu
To choose the items displayed in the quick menu:
1 Press and hold the Q button during shooting.
SELECT CUSTOM SETTING
SET
END
2 The current quick menu will be displayed; use the selector to highlight the item you wish to change
and press MENU/OK. You will be given the following choice of items to assign to the selected position:
SELECT CUSTOM SETTING
ISO
DYNAMIC RANGE
WHITE BALANCE
NOISE REDUCTION
IMAGE SIZE
IMAGE QUALITY
•
•
•
•
•
•
•
FILM SIMULATION
HIGHLIGHT TONE
SHADOW TONE
COLOR
SHARPNESS
SELF-TIMER
FACE DETECTION
•
•
•
•
•
•
•
PHOTOMETRY
AF MODE
FLASH MODE
FLASH COMPENSATION
IS MODE
MF ASSIST
MOVIE MODE
•
•
•
•
•
•
MOVIE ISO
MIC LEVEL ADJUSTMENT
SOUND & FLASH
EVF/LCD BRIGHTNESS
SHUTTER TYPE
NONE
R Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected,
current settings are shown in the quick menu by the label BASE.
3 Highlight the desired item and press MENU/OK to assign it to the selected position.
R The quick menu can also be edited using the h BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU
option in the setup menu (P 000).
The Q (Quick Menu) Button
•
•
•
•
•
•
•
43
The Fn (Function) Buttons
Using the Function Buttons
The roles played by each of the function buttons can be selected by pressing and holding the button.
The default options are shown below:
44
Fn1/AE button
Fn2/AUTO button
Fn3 button
Fn4 button
Photometry (P 000)
Auto mode on/off (P 000)
AF mode (P 000)
Film simulation (P 000)
Fn5 button
Fn6 button
Fn7/Fn button
Flash mode (P 000)
Focus-frame selection (P 000)
Movie recording (P 000)
Using the Function Buttons
Assigning Roles to the Function Buttons
To assign roles to the function buttons, press and hold the DISP/BACK button until the menu below is
displayed. Select buttons to choose their roles.
FUNCTION (Fn) SETTING
PREVIEW DEPTH OF FIELD (P 000)
ISO (P 000)
SELF-TIMER (P 000)
IMAGE SIZE (P 000)
IMAGE QUALITY (P 000)
DYNAMIC RANGE (P 000)
FILM SIMULATION (P 000)
•
•
•
•
•
•
•
WHITE BALANCE (P 000)
PHOTOMETRY (P 000)
AF MODE (P 000)
FOCUS AREA (P 000)
FLASH MODE (P 000)
FLASH COMPENSATION (P 000)
SELECT CUSTOM SETTING (P 000)
•
•
•
•
•
•
•
MOVIE (P 000)
FACE DETECTION (P 000)
RAW (P 000)
APERTURE SETTING (P 000)
WIRELESS COMMUNICATION (P 000)
SHUTTER TYPE (P 000)
PREVIEW EXP. IN MANUAL MODE
•
•
•
•
•
(P 000)
PREVIEW PIC. EFFECT (P 000)
COMMAND DIAL SETTING (P 000)
AUTO MODE ON/OFF (P 000)
EVF/LCD SETTING (P 000)
NONE (P 000)
R To disable the selected button, choose NONE.
R You can also display options for any of the function buttons by pressing and holding the button.
R The roles played by the function buttons can also be selected using h BUTTON/DIAL SETTING > FUNCTION
(Fn) SETTING (P 000).
The Fn (Function) Buttons
•
•
•
•
•
•
•
45
More on Photography and Playback
Mode Selection
The camera offers a choice of modes in which you can manually adjust shutter speed and/or aperture
(P, S, A, and M modes; P 000, 000, 000, 000) and auto modes in which settings are automatically adjusted for the subject or the selected scene (P 000).
P, S, A, and M Modes
Choose P, S, A, or M mode for manual control over shutter speed and/or aperture. The role of the command dial
varies with the mode selected.
Aperture ring
Shutter speed dial
Aperture mode switch
Mode
Description
Program AE: The camera adjusts settings automatically, but you can use the
command dial to choose from combinations of shutter speed and aperture
that will produce optimal exposure (program shift).
Shutter-priority auto: You choose the shutter speed using the shutter speed
and command dials and let the camera adjust aperture for optimal exposure.
Aperture-priority auto: You choose the aperture using the aperture ring and
let the camera adjust shutter-speed for optimal exposure.
Manual exposure: You control both shutter speed and aperture.
Role of command dial
Program shift
000
Shutter speed fine-tuning
000
—
000
Shutter speed fine-tuning
000
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 000).
46
Mode Selection
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 000).
Q If the subject is outside the metering range of the camera,
the shutter speed and aperture displays will show “– – –”.
Program Shift
If desired, you can rotate the command dial to select other combinations of shutter speed and aperture without altering exposure (program shift). The new values
for shutter speed and aperture are shown in yellow. Program shift is not available
if the attached flash supports TTL auto, or if an auto option is selected for U DYNAMIC RANGE in the shooting menu (P 93). To cancel program shift, turn the
camera off.
4000 5.6
400
Shutter speed
01 0.5
R For information on the role of the command dial when the camera is used with
lenses not equipped with an aperture ring, see “Lenses with No Aperture Rings”
(P 000).
More on Photography and Playback
■ Program AE (P)
To allow the camera to adjust both shutter speed and aperture for optimal exposure, set shutter speed and aperture to A. P will appear in the display.
1.0
1.5
2000 5.6
2.0
3.0
5.0
10
400
Aperture
47
Mode Selection
■ Shutter-Priority AE (S)
To adjust shutter speed manually while letting the camera select aperture for optimal exposure, set aperture to
A and use the shutter speed dial. S will appear in the display.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 000).
2000 5.6
400
R At settings other than 180X, shutter speed can also be adjusted in increments of 1/3 EV by rotating the command
dial. Shutter speed can be adjusted even while the shutter button is pressed halfway.
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 000).
Q If the correct exposure can not be achieved at the selected shutter speed, aperture will be displayed in red
when the shutter button is pressed halfway. Adjust shutter speed until the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the aperture display will show “– – –”.
48
Mode Selection
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 000).
4000 5.6
400
More on Photography and Playback
■ Aperture-Priority AE (A)
To adjust aperture manually while letting the camera select shutter speed for optimal exposure, rotate the shutter
speed dial to A and adjust aperture as desired. A will appear in the display.
R Aperture can be adjusted even while the shutter button is pressed halfway.
Q If the correct exposure can not be achieved at the selected aperture, the shutter speed will be displayed in red
when the shutter button is pressed halfway. Adjust aperture until the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”.
Previewing Depth of Field
When L PREVIEW DEPTH OF FIELD is assigned to a function button (P 000),
pressing the button stops aperture down to the selected setting, allowing depth
of field to be previewed in the display.
Depth of field can also be previewed using the depth-of-field indicator in the
standard display. Press DISP/BACK to cycle through display modes until standard
indicators are displayed.
01 0.5
1.0
1.5
2.0
5.6
1.0
1.5
3.0
5.0
10
400
2.0
3.0
5.0
Depth of field
49
Mode Selection
■ Manual Exposure (M)
Exposure can be altered from the value suggested by the
camera by setting both shutter speed and aperture to
values other than A. M will appear in the display.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 000).
R At settings other than 180X, shutter speed can also be adjusted in increments of 1/3 EV by rotating the command dial.
01 0.5
1.0
1.5
2000 5.6
2.0
3.0
5.0
10
400
R The manual exposure display includes an exposure indicator that shows the amount the picture would be
under- or over-exposed at current settings.
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 000).
Exposure Preview
To preview exposure in the LCD monitor, select ON for A SCREEN
SET-UP > PREVIEW EXP. IN MANUAL MODE. Select OFF when
using the flash or on other occasions on which exposure may
change when the picture is taken.
50
Mode Selection
1 Press the function button (Fn2/AUTO) to enable auto mode.
Q AUTO is displayed in red when auto mode
is selected.
2 Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight A SCENE POSITION and press MENU/OK.
More on Photography and Playback
Auto Modes
Press a function button (by default, Fn2/AUTO) to select an auto mode in which the camera automatically adjusts settings according to the scene or shooting conditions.
3 Press the selector up or down to highlight the desired option and press MENU/OK to select.
Mode
S ADVANCED SR AUTO
h PORTRAIT
Z PORTRAIT ENHANCER
M LANDSCAPE
N SPORT
O NIGHT
H NIGHT (TRIPOD)
p FIREWORKS
Q SUNSET
R SNOW
Description
The camera automatically optimizes settings to suit the scene (P 52).
Choose for portraits.
Processes portraits to give the subject a smooth, natural-looking complexion.
Choose for daylight shots of buildings and landscapes.
Choose when photographing moving subjects.
Choose for poorly lit twilight or night scenes.
Choose this mode for slow shutter speeds when shooting at night.
Slow shutter speeds are used to capture the expanding burst of light from a firework.
Choose this mode to record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white
snow.
51
Mode Selection
Mode
s BEACH
f UNDERWATER
U PARTY
V FLOWER
W TEXT
Description
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
Reduces the blue cast typically associated with underwater lighting.
Capture indoor background lighting under low-light conditions.
Effective for taking more vivid shots of flowers.
Take clear pictures of text or drawings in print.
■ S ADVANCED SR AUTO
The scene selected by the camera in S ADVANCED SR AUTO mode is shown
by an icon in the display.
a AUTO
c LANDSCAPE
d NIGHT
h NIGHT (TRIPOD)
e MACRO
v SUNSET
x SKY
z SKY & GREENERY
g BACKLIT PORTRAIT
a PORTRAIT&MOTION
u BEACH
w SNOW
y GREENERY
d PORTRAIT
c MOVING OBJECT
b BACKLIT PORTRAIT&MOTION
Q The mode selected may vary with shooting conditions. If the mode and subject do not match, select a scene
manually.
52
Long Time-Exposures (T/B)
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R To reduce “noise” (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting
menu (P 94). Note that this may increase the time needed to record images after shooting.
Time (T)
1 Rotate the shutter speed dial to T.
2 Rotate the command dial to choose
the exposure time.
3 Press the shutter button all the way
down to take a picture at the selected shutter speed. A count-down
timer will be displayed while the exposure is in progress.
Bulb (B)
1 Rotate the shutter speed dial to B.
2 Press the shutter button all the way
down. The shutter will remain open
for up to 60 minutes while the shutter button is pressed; the display
shows the time elapsed since the
exposure started.
More on Photography and Playback
Select a shutter speed of T (time) or B (bulb) for long time-exposures.
R Selecting an aperture of A fixes shutter speed at 30 s.
R For information on the role of the command dial
when the camera is used with lenses not equipped
with an aperture ring, see “Lenses with No Aperture
Rings” (P 000).
53
Long Time-Exposures (T/B)
Using a Remote Release
An optional RR-90 remote release can be used for
long time-exposures. See the manual provided
with the RR-90 for more information.
Third-Party Remote Releases
• Third-party remote releases (available from thirdparty suppliers) can be connected as shown below.
• Electronic releases from third-party suppliers can
be connected via the microphone/remote release
connector. A confirmation dialog will be displayed
when a third-party release is connected; press
MENU/OK and select n REMOTE for MIC/REMOTE
RELEASE.
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
54
Exposure Compensation
4000 5.6
400
Exposure compensation indicator
Choose positive values (+) to
increase exposure
Choose negative values (–) to
reduce exposure
Q The amount of compensation available varies with
the shooting mode.
Exposure Value (EV)
The exposure value is determined by the sensitivity of the image sensor and the amount of light to
which the sensor is exposed. Doubling the amount
increases EV by one, while halving it reduces EV by
one. The amount of light entering the camera can be
controlled by adjusting aperture and shutter speed.
Choosing an Exposure Compensation Value
• Backlit subjects: Choose values
from +2/3 EV to +12/3 EV.
More on Photography and Playback
Rotate the exposure compensation dial to adjust
exposure when photographing very bright, very
dark, or high-contrast subjects. The effect is visible in the display.
• Highly reflective subjects or very
bright scenes (e.g., snowfields): +1 EV
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or dark-colored foliage):
–2/3 EV
55
Focus/Exposure Lock
To compose photographs with off-center subjects:
1 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while
the shutter button is pressed halfway (AF/AE lock).
R Focus and exposure can also be locked with the AF-L and AE-L buttons, respectively (if AE/AF LOCK is
selected for d AF-LOCK BUTTON in the shooting menu, pressing the AF-L button will lock both focus
and exposure; P 95).
2 Recompose: Keep the shutter button pressed halfway or keep the AF-L or AE-L button pressed.
R Focus and/or exposure will remain locked while the AF-L or AE-L button is pressed,
whether or not the shutter button is pressed halfway. If AE&AF ON/OFF SWITCH is
selected for v AE/AF-LOCK MODE (P 95), focus and/or exposure lock when the button is pressed and remain locked until the button is pressed again.
3 Shoot: Press the shutter button all the way down.
R The roles of the AE-L and AF-L buttons can be reversed using the h BUTTON/DIAL SETTING > AE-L/AF-L
BUTTON SETTING option in the setup menu.
56
Focus/Exposure Lock
• Fast-moving subjects.
•
•
•
•
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
More on Photography and Playback
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below.
• Very shiny subjects such as mirrors or car bodies.
57
Metering
To choose how the camera meters exposure, press the function button (Fn1/AE) to display metering options. Use the selector to highlight an option and press MENU/OK to select.
Q The selected option will only take effect when Intelligent Face Detection
is off (P 000).
Mode
(MULTI)
Description
The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution.
Recommended in most situations.
The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recomp
mended with backlit subjects and in other cases in which the background is much brighter or darker than the main
(SPOT)
subject.
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same
(AVERAGE) lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.
R Metering options can also be accessed from the shooting menu (P 000).
58
Film Simulation
Option
c (PROVIA/STANDARD)
> (Velvia/VIVID)
Description
Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
A high-contrast palette of saturated colors, suited to nature photos.
Enhances the range of hues available for skin tones in portraits while preserving the bright blues
e (ASTIA/SOFT)
of daylight skies. Recommended for outdoor portrait photography.
Soft color and enhanced shadow contrast for a calm look.
i (CLASSIC CHROME)
Offers slightly more contrast than h (PRO Neg. Std). Recommended for outdoor portrait phog (PRO Neg. Hi)
tography.
A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good
h (PRO Neg. Std)
choice for studio portrait photography.
Take pictures in standard black and white.
; (MONOCHROME)
Take black-and-white pictures with slightly increased contrast. This setting also slightly tones
e (MONOCHROME + Ye FILTER)
down the brightness of the sky.
Take black-and-white pictures with increased contrast. This setting also tones down the brightd (MONOCHROME + R FILTER)
ness of the sky.
f (MONOCHROME + G FILTER) Soften skin tones in black-and-white portraits.
Take pictures in sepia.
f (SEPIA)
More on Photography and Playback
Simulate the effects of different kinds of film, including black-andwhite (with or without color filters). Press the function button (Fn4)
to display the following options, then use the selector to highlight an
option and press MENU/OK to select.
R Film simulation options can be combined with tone and sharpness settings (P 94).
R Film simulation options can also be accessed from the shooting menu (P 000).
59
The DRIVE Button
The DRIVE button gives you access to the following options.
STILL IMAGE
Drive mode
B STILL IMAGE
I CONTINUOUS
O AE BKT
W ISO BKT
X FILM SIMULATION BKT
H WHITE BALANCE BKT
Y DYNAMIC RANGE BKT
Adv. MODE
u MOTION PANORAMA
j MULTIPLE EXPOSURE
Y ADVANCED FILTER
60
—
000
000
000
000
000
000
000
000
000
Available in
All shooting modes
Modes P, S, A, and M
All shooting modes
(but note that camera functions in auto mode when auto mode is selected)
The DRIVE Button
1 Press the DRIVE button to display drive options.
2 Press the selector up or down to highlight I,
then press the selector left or right to choose
a frame rate of J (high) or O (low). Press
MENU/OK to proceed when settings are complete.
3 Press the shutter button halfway to focus.
4 Press the shutter button the rest of the way
down to start shooting. Shooting ends when
the shutter button is released, the maximum
number of pictures has been taken, or the
memory card is full.
R Frame rate varies with the subject, shutter speed,
sensitivity, and focus mode and may slow as more
shots are taken.
R The flash turns off automatically; the previously-selected flash mode is restored when burst shooting
is disabled.
R Additional time may be required to record pictures
when shooting ends.
R If file numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 000).
R In some drive modes, shooting may not begin if the
space available on the memory card is insufficient.
More on Photography and Playback
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Focus and Exposure
To vary focus and exposure with each shot, select focus mode C; in other modes, focus and exposure are
determined by the first shot in each series.
Q Selecting J in focus mode C restricts the choice of focus
frames (P 000).
Q Exposure and focus tracking performance may vary with
aperture, sensitivity, and shooting conditions.
61
The DRIVE Button
Bracketing
Automatically vary settings over a series of pictures.
1 Press the DRIVE button to display drive options and press the selector up or down to highlight one of the following:
Option
Description
Press the selector left or right to highlight a bracketing amount. Each time the shutter button is pressed,
the camera will take three shots: one using the metered value for exposure, the second overexposed by
AE BKT
the selected amount, and the third underexposed by the same amount (regardless of the amount selected,
exposure will not exceed the limits of the exposure metering system).
Press the selector left or right to highlight a bracketing amount. Each time the shutter is released, the camera will take a picture at the current sensitivity (P 75) and process it to create two additional copies, one with
ISO BKT
sensitivity raised and the other with sensitivity lowered by the selected amount (regardless of the amount
selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION Each time the shutter is released, the camera takes one shot and processes it to create copies with the film
BKT
simulation settings selected for X FILM SIMULATION BKT in the shooting menu (P 96).
Press the selector left or right to choose the bracketing amount. Each time the shutter button is pressed,
WHITE BALANCE
the camera takes three shots: one at the current white balanced setting, one with fine-tuning increased by
BKT
the selected amount, and another with fine-tuning decreased by the selected amount.
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges (P 93):
DYNAMIC RANGE 100% for the first, 200% for the second, and 400% for the third. While dynamic range bracketing is in effect,
BKT
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in effect is restored when
bracketing ends.
2 Press MENU/OK to select the highlighted option.
62
3 Take photographs.
The DRIVE Button
1 Press the DRIVE button to display drive options.
5 Pan the camera in the direction shown by the
Press the selector up or down to highlight Adv.,
then press the selector left or right to highlight
r MOTION PANORAMA and press MENU/OK.
arrow. Shooting ends automatically when the
camera is panned to the end of the guides
and the panorama is complete.
Sweep camera along yellow
line in direction of y
ANGLE
30
2 To select the size of the angle through which
you will pan the camera while shooting, press
the selector left. Highlight a size and press
MENU/OK.
DIRECTION
2.0
800
R Shooting ends if the shutter button is pressed all
the way down during shooting. No panorama
may be recorded if the shutter button is pressed
before the panorama is complete.
More on Photography and Playback
Panoramas
Follow an on-screen guide to create a panorama.
3 Press the selector right to view a choice of pan
directions. Highlight a pan direction and press
MENU/OK.
4 Press the shutter button all the way down to
start recording. There is no need to keep the
shutter button pressed during recording.
63
The DRIVE Button
Q Panoramas are created from multiple frames; exposure for the entire panorama is determined by the
first frame. The camera may in some cases record an
greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of
the panorama may not be recorded if shooting ends
before the panorama is complete.
Q Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
Q The desired results may not be achieved with moving subjects, subjects close to the camera, unvarying subjects such as the sky or a field of grass, subjects that are in constant motion, such as waves and
waterfalls, or subjects that undergo marked changes in brightness. Panoramas may be blurred if the
subject is poorly lit.
64
For Best Results
For best results, use a lens with a focal length of
35 mm or less (50 mm or less in 35 mm format). Prop
your elbows against your sides and move the camera slowly in a small circle at a steady speed, keeping
the camera parallel or at right angles to the horizon
and being careful only to pan in the direction shown
by the guides. Use a tripod for best results. If the
desired results are not achieved, try panning at a different speed.
The DRIVE Button
PLAY
STOP
PAUSE
More on Photography and Playback
Viewing Panoramas
To zoom in on a panorama in full-frame playback, press the
k button and use the k and n buttons to zoom in and
out. Alternatively, you can play the panorama back using
the selector. Press the selector down to start playback and
press again to pause. While playback is paused, you can
scroll the panorama manually by pressing the selector left or right; vertical panoramas will scroll vertically, horizontal panoramas horizontally. To exit to full-frame playback, press the selector up.
65

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : S01-01
Create Date                     : 2015:12:10 20:51:09+08:00
Modify Date                     : 2015:12:10 20:51:28+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:12:10 20:51:28+08:00
Creator Tool                    : Adobe InDesign CS4_J (6.0.6)
Format                          : application/pdf
Title                           : $00 LX22_OM_200-EN.indb
Creator                         : S01-01
Document ID                     : uuid:4c9d9d49-5b65-49de-8da2-389e147526a0
Instance ID                     : uuid:adca28c6-fcf3-4edc-99b7-23216e810046
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Page Count                      : 40

EXIF Metadata provided by EXIF.tools