Fujitsu Technology Solutions SCENIC6651 Personal Computer User Manual A26361 K520 Z200 1 7619

Download:
Mirror Download [FCC.gov]
Document ID	100414
Application ID	jVyur9ikWmlUZZqwUwiBQg==
Document Description	Scenic 600 Scenic xB May 2000 part1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.38kB (217235 bits)
Date Submitted	2000-05-16 00:00:00
Date Available	2000-05-26 00:00:00
Creation Date	2000-04-25 13:59:23
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-05-15 14:47:13
Document Title	A26361-K520-Z200-1-7619
Document Creator	AdobePS5.dll Version 5.1
Document Author:	Siemens AG

PC
SCENIC 600 / SCENIC xB
OPERATING MANUAL
Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• one of our service partners
• your sales partner
• your sales outlet
The addresses of your service partners are contained in the guarantee booklet or in the service
address booklet.
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-K520-Z200-1-7619
Printed in the Federal Republic of Germany
AG 0500 05/00
A26361-K520-Z200-1-7619
SCENIC 600 / SCENIC xB
OPERATING MANUAL
Introduction
Important notes
SCENIC 600 / SCENIC xB
Preparation for use and
operation
Troubleshooting and tips
System expansions
Operating Manual
Technical data
Index
May 2000 edition
Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft
Corporation.
VESA and DPMS are trademarks of Video Electronics Standards Association.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of Intel Corporation, USA.
Acrobat Reader is a trademark of Adobe Systems Incorporated.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ã Fujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
Contents
Introduction .....................................................................................................................................1
Notational conventions ......................................................................................................................1
Important notes ...............................................................................................................................3
Safety ................................................................................................................................................3
Notes on installing and removing boards ...................................................................................3
Manufacturer’s notes .........................................................................................................................4
Energy saving............................................................................................................................4
Disposal and recycling...............................................................................................................4
CE certificate .............................................................................................................................5
FCC Class B Compliance Statement .................................................................................................5
Power cord selection .........................................................................................................................6
Transporting the PC ..........................................................................................................................7
Cleaning the PC ................................................................................................................................8
Preparation for use and operation .................................................................................................9
Unpacking and checking the delivery ................................................................................................9
Steps for initial setup .........................................................................................................................9
Setting up the PC ............................................................................................................................ 10
Connecting devices ......................................................................................................................... 10
Ports for external devices ........................................................................................................ 11
Connecting the keyboard......................................................................................................... 12
Connecting the mouse............................................................................................................. 12
Connecting devices with serial or parallel port ......................................................................... 12
Connecting the monitor to the line voltage ............................................................................... 13
Connecting the PC to the line voltage.............................................................................................. 14
Unlocking/locking the system unit.................................................................................................... 15
Switching the PC on and off ............................................................................................................ 16
Switching on the PC for the first time ....................................................................................... 17
Switching on the PC ................................................................................................................ 18
Switching off the PC ................................................................................................................ 18
Indicators on the system unit ........................................................................................................... 19
Keyboard......................................................................................................................................... 20
Important keys and key combinations...................................................................................... 21
Working with floppy disks ................................................................................................................ 22
Settings in BIOS Setup .................................................................................................................... 23
Property and data protection ........................................................................................................... 23
Locking the system unit mechanically...................................................................................... 23
Access authorization via chipcard............................................................................................ 23
Security functions under Windows ........................................................................................... 23
BIOS Setup security functions ................................................................................................. 24
Theft protection and lead sealing ............................................................................................. 24
Troubleshooting and tips.............................................................................................................. 25
Installing new software .................................................................................................................... 25
Power-on indicator remains dark after you have switched on your device ....................................... 25
The screen stays blank.................................................................................................................... 26
No mouse pointer displayed on the screen ...................................................................................... 27
The floppy disk cannot be read or written ........................................................................................ 27
Time and/or date is not correct ........................................................................................................ 28
Error messages on the screen......................................................................................................... 28
Restoring the hard disk contents ..................................................................................................... 28
Tips 28
A26361-K520-Z200-1-7619
Contents
System expansions....................................................................................................................... 31
Opening the system unit ................................................................................................................. 31
Assembling the system unit ............................................................................................................ 32
Installing and removing a board ...................................................................................................... 33
Installing and removing drives......................................................................................................... 35
Installing an accessible drive................................................................................................... 36
Installing a hard disk drive in the front bay .............................................................................. 37
Removing an accessible drive................................................................................................. 38
Changing the floppy disk drive ................................................................................................ 39
Installing and removing the hard disk drive ............................................................................. 40
Installing/removing a chipcard reader.............................................................................................. 43
Installation opening for 2nd serial port............................................................................................... 44
Extensions on the system board ..................................................................................................... 44
Upgrading main memory ......................................................................................................... 44
Replacing processor and lithium battery.................................................................................. 45
Technical data ............................................................................................................................... 47
Index .............................................................................................................................................. 49
A26361-K520-Z200-1-7619
Introduction
This Operating Manual tells you how to put your PC into operation and how to operate it in daily use.
This description applies for all configuration levels. Depending on the configuration level chosen
some of the hardware components described may not be available on your PC. Please observe the
notes on your operating system.
Your device is a powerful PC which is suitable for both professional and private use.
Your PC is available in various configuration levels, which differ in hardware and software
equipment. In addition, you can incorporate operable drives (for example DAT drive, streamer) and
a second hard disk, as well as other boards.
Depending on the configuration level chosen, your PC is supplied with Windows 9x, Windows 2000
or Windows NT as the operating system.
Your PC has a number of security features to ensure that no unauthorized persons can access your
data. For example, you can activate a screen saver with password protection. The security functions
in the BIOS Setup also allow you to protect your data by means of passwords. In addition, you can
also lock your PC mechanically using the cover lock. Systems with a chipcard reader offer additional
protection.
Further information on this PC is provided:
•
•
•
•
•
•
in the manual "Safety, Guarantee and Ergonomics"
in the Operating Manual for the monitor
in the Technical Manual for the system board
in the manual "BIOS Setup"
in the documentation of your operating system
in the information files (e. g. *.TXT, *.DOC, *.WRI, *.HLP)
Some of the manuals listed can be found on the CD "Drivers & Utilities" provided
with your computer. These manuals can be read and printed with the Acrobat
Reader contained on the CD.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
Ê
Pay particular attention to texts marked with this symbol. Failure to observe this warning
endangers your life, destroys the system, or may lead to loss of data.
Supplementary information, remarks and tips follow this symbol.
Texts which follow this symbol describe activities that must be performed in the order shown.
Texts in this typeface are screen outputs.
Texts in italics indicate commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being emphasized.
A26361-K520-Z200-1-7619
Important notes
In this chapter you will find information regarding safety which it is essential to take note of when
working with your PC. The manufacturer's notes contain helpful information on your PC.
Safety
•
•
•
•
•
•
Pay attention to the information provided in the manual "Safety, Guarantee and
Ergonomics" and to the following notes.
During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled "Technical data" as well as the instructions in
the chapter "Preparation for use and operation".
Please check whether the device is set to the local power supply (see chapter "Preparation for
use and operation").
The main switch and the ON/OFF switch do not disconnect the system unit from the line
voltage. To disconnect the line voltage completely, remove the power plug from the grounded
power outlet.
Replace the lithium battery on the system board in accordance with the instructions in the
chapter "System expansions - Replacing processor and lithium battery".
Caution: components in the system can get very hot.
Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include this manual.
Notes on installing and removing boards
Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.
When you handle boards fitted with ESDs, you must observe the following
points under all circumstances:
•
•
•
•
•
A26361-K520-Z200-1-7619
You must always discharge yourself (e. g. by touching a grounded
object) before working.
The equipment and tools you use must be free of static charges.
Pull out the power plug before inserting or pulling out boards containing
ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
Important notes
Manufacturer's notes
Manufacturer's notes
Energy saving
When the PC is delivered, some energy-saving functions are already set (see the Technical Manual
for the system board or the manual "BIOS Setup").
•
•
If you are not using your PC, switch it off.
In the BIOS Setup you may set further energy-saving functions for the PC (see the Technical
Manual of the system board or in the manual "BIOS Setup").
Energy saving under Windows NT
If the attached monitor and screen controller support power management in accordance with VESA
(DPMS), the screen saver Powersaver can be used to switch the monitor into power management
mode.
Energy saving under Windows 9x
Using the DeskLock program you can lock the mouse and keyboard so that no input can be made. If
the attached monitor supports power management in accordance with VESA (DPMS), it can be
switched into power-saving mode at the same time.
In addition the Screen Saver tab allows you to set energy-saving functions for your screen. Select the
following item in the menu: Start - Settings - Control Panel - Display - Display Properties - Screen Saver Energy saving features of monitor .
With the default setting Control Panel - Power - Advanced additional energy saving features of
Windows 9x are available.
Energy saving under Windows 2000
The Screen Saver tab allows you to set energy-saving functions for your screen. Select the following
item in the menu: Start - Settings - Control Panel - Display - Display Properties - Screen Saver - Energy
saving features of monitor .
With the default setting Control Panel - Power Options - Advanced additional power management
features of Windows 2000 are available.
Disposal and recycling
This device has been manufactured to the greatest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device is taken back
after use, to be recycled, provided that it is returned in a condition that is the result of normal use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
For devices marked with this symbol Fujitsu Siemens Computers GmbH
offers a guarantee for 36 months with a Bring-in-Service. The guarantee
starts on the day of delivery (sale date) by Fujitsu Siemens Computers
GmbH or a Fujitsu Siemens partner.
We herewith declare that it will be possible to repair any device marked with
the eco-label for at least 5 years after production of that device has
discontinued.
Information on power management and energy saving mode can be found in
chapter "Technical data".
A26361-K520-Z200-1-7619
FCC Class B Compliance Statement
Important notes
Do not throw lithium batteries or accumulators into the trashcan. They must be disposed of in
accordance with local regulations concerning special waste.
If you have any questions on disposal, please contact your local office, our customer service center,
or:
Fujitsu Siemens Computers GmbH
Recyclingcenter
D-33106 Paderborn
Tel.: ..49 5251 818010
Fax: ..49 5251 818015
CE certificate
The shipped version of this device complies with the requirements of the EEC directives
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".
FCC Class B Compliance Statement
If there is an FCC statement on the device, then:
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital device,
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian InterferenceCausing Equipment Regulations. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in strict accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused
by unauthorized modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The
correction of interference caused by such unauthorized modification, substitution or attachment will
be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.
A26361-K520-Z200-1-7619
Important notes
Power cord selection
Power cord selection
The power cord for this unit has been packed
separately and has been selected for use in the
appropriate country. It must be used to prevent
electric shock. Use the following guidelines if it
is necessary to replace the original cord set.
The female receptacle of the cord set must meet
CEE-22 requirements (see Figure).
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three-conductor cord with a maximum
length of 15 feet.
For units that stand on a desk or table, type SVT or SJT cord sets shall be used.
For units that stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please consult Table A
for the selection criteria for power cords used in the United States and Canada.
Table A:
Cord Type
Size of Conductors
in Cord
Maximum Current
Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
SVT
For units set at 115 V:
For units set at 230 V (domestic use):
use a parallel blade, grounding type attachment
plug rated 15 A, 125 V.
use a tandem blade, grounding type attachment
plug rated 15 A, 250 V.
A26361-K520-Z200-1-7619
Transporting the PC
Important notes
For units set at 230 V (outside of the United States and Canada):
use a cord set consisting of a minimum AWG according to Table A and a grounding type attachment
plug rated 15 A, 250 V. The cord set should have the appropriate safety approvals for the country in
which the equipment will be installed and should be marked HAR.
For the United Kingdom
Should the plug on the flexible cord not be of the type for your socket outlets, do not use an adapter
but remove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a
suitable plug.
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in this mains lead are colored in accordance with the following code:
Green and Yellow:
Blue:
Brown:
Earth
Neutral
Live
As the colors of the wires in the mains lead of this appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows:
•
The wire which is colored Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol or colored Green or Green and Yellow.
The wire which is colored Blue must be connected to the terminal which is marked with the
letter N or colored Black.
The wire which is colored Brown must be connected to the terminal which is marked with the
letter L or colored Red.
•
•
Transporting the PC
Transport all parts separately, and in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site. Do not unpack them until all
transportation maneuvers are completed.
Never drop the monitor (risk of implosion)!
A26361-K520-Z200-1-7619
Important notes
Cleaning the PC
Cleaning the PC
Turn off all power and equipment switches and pull the power plug out of the grounded
power outlets.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the system.
Ensure that the ventilation areas of the system unit and the monitor are free.
Cleaning the system unit and the monitor
Wipe the system unit and monitor casing with a dry cloth. If particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
Cleaning the keyboard and the mouse
Use disinfectant wipes to clean the keyboard and the mouse.
Remove the retaining ring on the underside of the mouse and then clean the mouse mechanism and
the rotating ball.
Ê
Using both thumbs exert downward pressure on the notches of the retaining ring and turn the
ring anticlockwise (1).
Ê
Ê
Ê
Ê
Remove the retaining ring and the rotating ball from the mouse (2).
Clean the three small wheels in the mouse and the ball with a lint-free cloth.
Replace the ball and the retaining ring (3).
Using both thumbs exert downward pressure on the notches of the retaining ring (4) and turn
the ring clockwise. You must feel the ring engage.
A26361-K520-Z200-1-7619

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2000:04:25 13:59:23
Producer                        : Acrobat Distiller 4.0 for Windows
Creator                         : AdobePS5.dll Version 5.1
Subject                         : SCENIC€600 / SCENIC xB
Keywords                        : OPERATING, MANUAL
Author                          : Siemens AG
Title                           : A26361-K520-Z200-1-7619
Modify Date                     : 2000:05:15 14:47:13+02:00
Page Count                      : 16
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools